2,732 models
During assembling my MK4 I realized that I was not able to perfectly align the y belt and after closer inspection, I saw that the motor is slightly canted when tightening down the screws, since the thermal pad is slightly thicker and not…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
Since I needed a liftarm with holes instead of crosses and in regular as well as half thickness, I constructed a 3x5 and 3x5x0.5 liftarm similar to the Lego - parts 99773, 65193, 2905. Print the liftarms in STL orientation with support on…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo: You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Matthew's Modern Gridfinity Case design is fantastic, but I find that it takes up a lot of desk space when hinged fully open. This simple mod replaces the hinge pieces with new ones that limit the travel to approximately 100 degrees. I…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
Modifier File to add fuzzy skin to the handles only. Not perfect but works quite well. The world coordinates for the modifier are X: 0, Y: 4.30 and Z: 8.39. Takes some time getting it into the right place so make sure it looks like the…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
To use this, you will have to increase the size of all model parts to 135% !!! (the menhir is already resized) After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as…
Print approx. €13.53–€16.53 excl. taxPreliminary estimate for one variant
The rivets were lengthened and the heads flattened to hold the individual parts together for my photo fan project. I recommend slicing 0.1mm. Die Nieten wurden verlängert, die Köpfe abgeflacht, um bei meinem Projekt Fotofächer die…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Is your i3MK3S+ printer wanting you to unload filament and reload filament in the middle of print for no reason? What's happening here is that the lever arm inside the extruder isn't fully blocking the light inside the sensor when the…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
This is an accessory or waste tray for the Prusa MK4/MK4S 3d printer. It is a remix with a few tweaks of my preference: Added a second clip to attach box to printer frame extrusion Added an accessory cover out of another published model…
Print approx. €4.21–€5.15 excl. taxPreliminary estimate for one variant
A set of magnetically mountable light shapers for Yongnuo YN685 flashes, consisting of a gel holder and a honeycomb/grid that reduces the light output angle to roughly 40°. The magnets used are widely-available 8x3mm neodymium ones (dia x…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
Print approx. €17.71–€21.65 excl. taxPreliminary estimate for PETGSource material: PET
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) Screw the main part (ECK - Main), the “visible” holes must be vertically aligned Insert your selected cabinet knob (ECKH - *******) Turn the cabinet…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…
Print approx. €6.37–€7.78 excl. taxPreliminary estimate for PETGSource material: PET
(pour le français, voir plus bas) Change easily your cabinet knob according your mood :) This is the Halloween edition! Please, this project contains only the custom parts for Halloween. You need the main part (ECK) in my original…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Ho apportato alcune modifiche alla MMU2. 1)- Il piano di base è rinforzato a 4 mm. 2) - Rinforzato anche il coperchio supporto elettronica. 3) - Riporto a misura del fianco sinistro. 4) - Incluso nella base le filettature per i raccordi…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
I remixed this model so that larger tools can fit through the handle holes to screw it down. I also made it longer to be more ergonomic. I also flattened the bottom to help improve printing. I usually print with a 0.4 mm nozzle at 0.16mm…
Print approx. €2.88–€3.51 excl. taxPreliminary estimate for one variant
The stock MMU3 Selector tends to break when tightening the clamp that holds the FINDA in place. My first one broke, as it seems they made the hole larger than the previous model. I ended up remodeling a couple features on it. First, I…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Great for architectural visualization or as reference. The ‘aluminum shell’ part can also be printed separately as a replacement for a damaged unit. Material PETG or PC-ABS recommended
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for PETGSource material: PET
7x threaded inserts M3 2x threaded inserts M6 7x M3x8 DIN 7991 2x M6x16 DIN 933
Print approx. €4.92–€6.02 excl. taxPreliminary estimate for PETGSource material: PET
LDO Nitehawk36 Cover Modification for Voron Trident I have remodelled the LDO Nitehawk36 Cover to fit the Voron Trident . The design now accommodates the necessary clearances for cable management,
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Parts for retrofitting 3D color instruments from VW into Skoda Octavia 2.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This cover is a remixed version of the Z stepper motor cable covers with more wiggle room for the cables to bend. I created it, because I felt the original cover where the LCD assembly cables leave the frame provides insufficient guidance…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
These clips are used to seal your open potato chip bag. Three sizes are available. Because there is a large printing overhang for the tabs, I included tree supports which removed easily.
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
Update 24/08/2023 : Add of an easiest way to plug a fan to your Mox with a unique part to print. The Turris Mox is an modular, open source and secure router. Even though this is a great router, it tends to get hot and reboot. To fix it, I…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
I created these 40mm wide Tokens for the Traveller RPG game to help players keep track of their modifier penalty due to damage to their character. The tokens are double sided ; -1 on one side and -3 on the other side. The tokens are made…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
DE: Dankeschön an Luca, diese Idee macht mir meinen Batterieorganizer noch wertvoller! AA und AAA Batterien haben oft im Bereiche des Plus-Poles eine ringförmige Kerbe. Damit der Hebel bei Vorhandensein besser daran angreifen kann habe…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
If you use the Coral Accelerator with the LimeLite and you use this (or the original) bracket, see the back-mount Coral bracket here https://www.printables.com/model/908221-coral-accellerator-bracket-for-limelight-bracket
Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant
PL Jest to modyfikacja spodniej części obudowy (tej z wtyczką 230 V) zdalnego sterowania centralnym ogrzewaniem firmy Tech sterowniki ST-292 v2 (występującą też pod nazwą Termet). Modyfikacja polega na usunięciu wtyczki 230 V i…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
DUMMY 13 resized to 200% with a few alterations. 200% feels like how this model was meant to be. This model does rely on strong materials, I’ve had good results with high quality PLA. I've added a couple of test STLs so you can test your…
I recommend printing the Solder Scroll tool and the modified spool from PETG. Press the larger area onto the backing, then snap the two parts together. After winding the soldering wire, clip it with the wire cutters flush with the coil.…
This is a modified chest for the Dummy 13 posable figure by @soozafone for large, scaled up prints for easier assembly. The ball joint of the Dummy 13 figure uses a slightly undersized socket to provide the necessary friction. When…
T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
I had to slightly modify the filets on CSD_Salzburg's excellent SKADIS Universal Hook system, as on my particular Skadis they were a tad loose. Included are STEP files for a hook with my modified filets, a hook without filets so you you…
MagicShrimp made covers that can be installed on the Elegoo Centauri Carbon to stop debris from getting under the bed.In the second batch of printers the bed mount was changed, so I modified MagicShrimp's design to suit batch 2. You'll…
For more detailed info, watch the YouTube video: The modified nut may not be needed. The modified lever is a drop-in replacement that shouldn't cause any issues but may resolve issues with poor grip on the filament.
remixed by: White JackaL Made the stand more stable. Print on its side so you dont have to use suports. Printer: Ender-3 Filament: PLA Hotend: 205c Hotbed: 50c Resolution: 0.2mm Infill: 15% cubic Subdivision Speed: 30-60 mms Print…
These are a portion of the files from https://blog.prusaprinters.org/mmu2s-printer-enclosure/ that have re-arranged/modified for printing on a Prusa Mini It doesn't include these parts because I assume you are enclosing a mini and don't…
Try one corner clip if it works for you.
Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…
This gcode is based upon the great work of Thrutheframe, though I ended up removing or changing a lot of his alterations due to them already being folded into the current P1S stock gcode. So these files don't change motor voltages (Bambu…
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
I like the original katana for lucky but the guard felt lacking to me so I model up a quick guard and edited the origin i printed this with the normal printing settings as lucky 13 (super glue required when putting the guard on)
This is a modification of the ubiquitous PS5 controller mini wheel add-on by pixel2: https://www.thingiverse.com/thing:4693372 Here is a video of it being printed and operated: https://youtube.com/shorts/xQ8_doe1zzo My modification…
Про то как пользоваться этим приспособлением я рассказываю в этом видео: https://boosty.to/internal_engineer/posts/2f7f2e46-ffed-48f4-83ae-be5985ef6b76 Если у вас закусывает верхнюю втулку оси X, эта 3D модель + наждачная бумага поможет…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Latest Update All other previous updates will be posted at the bottom. Update (4/18/2023) *Updated file - Light_Bar_Design_Final_4A to 5A and Light_Bar_Endcap_2B to 3B Based on the feedback received from @suit , I added detents that will…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…
The foot part is longer, chest a bit bigger and head slightly rounder and narower. Plus I've added helmet and katana which was edited from the staff.
Printed in PLA with 15% infill with supports. PETG would have been a better choice but did not have it. PLA have been coated with epoxy and spray painted in black. Can't find the original files on this website anymore, still had the files…
This medieval castle print was modeled from two European castles that are both majestic and have very interesting construction and incredible views. Schloss Lichtenstein and Neuschwanstein Castle, both located in Germany. I modified the…
Fits into the newer ashtray railsystem (after 96, i think.) modified some parts for better printing in PETg on Prusa MK3S: cupstand arms were strengthened because they broke easily on low res prints the front panel was split into 2 pieces…
So, this is my version of a Linear Rail Prusa Bear. Thank you to Grégoire Saunier for his fantastic work on the Prusa Bear, as this provided me with a fantastic starting off point. This will continue to be added with details, but the…
A simple Case for the NVIDIA Shield Remote. There are two versions, with access to the Netflix button and without: “With Netflix” to have the button NOT blocked “No Netflix” to have it blocked The back is flat so the remote can actually…
Kleiner Pokal für zweifarbigen Druck (Sockel und Pokal sind separat). Beide Teile sind modifizierbar um zum Beispiel einen Text auf den Sockel zu drucken. Support bei den Griffen am Pokal empfohlen. Beliebig skalierbar. Befestigung der…
Please use the updated version: https://www.printables.com/model/359020-bambu-lab-p1p-modified-led-mount-20 Updated version of this model with better cable management and a redesign of how the LED board is fitted in place. Description…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
This slightly modified main plate for the Nextruder was motivated by a few filament jams, where flexible filament (Shore 90A) got stuck between the extruder main gear and the stepper motor. This path is now blocked, which should hopefully…
This is a modified steering bar which better fits the dimension of a standard DS3218 servo. Print with supports.
The PrusaWatch - Individually modifiable band/strap in for watches in TPU As you can see, I decided to create a watch strap. There are many straps, so I wanted to design one that stands out from the rest. The result is the PrusaWatch…
This is a set of tilting stands for the Surefeed Pet Feeder, model MPF001. It's a modification of Wolf_Jameson's Surefeed Pet Feeder Adjustable Stand , specifically his model 2 version. He used screws to install pins to hold the stands in…
The new model Version 2 of SRAM chain gap adjustment tool provided with AXS derailleurs. Works on all SRAM Eagle 12-fach-Cassettes with 50 or 52 teeth as the largest sprocket :-)
Original model for the Heltec V3 by Muziworks: https://www.printables.com/model/741974-h1-case-for-heltec-v3-running-meshtastic This is a modified version of the original H1 case by Muziworks. I wanted to play around with a Heltec V4…
Ok... the original model is a beautiful work of art. There are, however, several issues with it. After no replies from the designer, I took it upon myself to repair the model and modify it for my own needs and to suit my own tastes. NOTE…
Hinges for a Flashforge Adventure5M. These have had the hole placement moved for better door swing. Door will not hit the frame now.
Improved taller enclosure for the FlashForge AD5X. These alternate parts and additional parts increase the overall height by 64mm, this gives proper room and clearance for the PTFE feed tubes, There is also a cowl that installs over the…
Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…
Thank you Enigma for the very nice design. It printed well and snapped together with ease. I did find that using the original lower lip dispenser design, if you pull a soda can too quick other cans wanted to follow. So I designed a quick…
Printed using Anycubic red PLA, 15% adaptive cubic infill and 2 parameters.
The original article is well done, I needed to adapt it to a specific case, I ended up modifying the fit of the 2 pieces.
Update (2023/7/13): Added the “WithRegister” variations for the TopBody and BottomBody The RegisterCube can be used to align the top and bottom body when gluing the two parts The RegisterCube is 0.2mm smaller than the register holes,…
This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…
so yah, as title says, this is basically a remix I designed. I took the light bar dimensions and whatnot and then made this model based on my likings. The one that BL suggests printing points the LED's at a strait across angle. basically…
Same enclosure, I just removed the personal logo inlay from the pieces.
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
I've solved some errors in the lower part and modified the top part to have space to use the GPIO pins from outside and have the pin to fit a 30x30 mm fan without screws. The fan is oriented to blow air inside. I've removed the holder,…
This is a remix of the Mechanical Tally Counter 5.0 by FredrikHamrebjorkDesigns. I modified the Left and Right buttons, and the Back Cover. All other parts can be printed downloaded from the original model maker's page: Mechanical Tally…
Modelo modificado a partir del realizado por el usuario tksgeo La idea de mi modificación era hacerla compatible con una luz led de botón , sin necesidad de conectar cables y tener así un diseño más limpio. Para mantener las tapas en su…
Updated Version of the great mounting blocks from the original model for newer MacPacs
Staunton (Modified) Chess Set The Staunton chess set is composed of a style of chess pieces used in competitions. The journalist Nathaniel Cooke is credited with the design, and they are named after the English chess master Howard…
This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…
This honeycomb grid add-on fits the Aputure MC video lights . Due to it being friction mounted, there is no need for any modification whatsoever to the final print for it to stay attached. Just snap it onto the light and you're ready to…
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
A pre-made 3MF for Bambu Studio that has a swatch card and a modifier already set up.
I created these files for my Wood PLA Youtube video. After you open the file you can replace test wood plank with any STL file you like. Then resize, rotate and move the modifier to get the wood grain look that you want. I will add more…
I made the original DeSteiner M1887 2 years ago, and recently I revisited it, so why not making a variant with stock and a long barrel? I combined barrel-tube part 2 and 3 so that I don't have to assemble them and to reduce connection…
Can be printed without support
This is a recreation of @Rainers original Car phone mount https://www.printables.com/model/97310-car-phone-holder-samsung-cd-mount - this mount printed and worked almost perfectly for my requirements. I've just moved the front up a little…
I modified this for use with Tetrix pieces. This design has become my most popular and I want to credit it's original designer. See the remixed design Print Settings Printer: Qidi tech Rafts: Doesn't Matter Supports: Yes Resolution:…
A modified manual Turntable for 3D Scanning that doesn't need ball bearings or thruster. Just add any grease to the circle under the middle round platform. For it to stop moving on surface i bought non slip sticky pads on amazon and it…
Remix of the grain scoop by tray_withdraw at https://www.thingiverse.com/thing:3544205. Closed the hole in the handle, greatly increasing its strength and keeping stuff out of it.
I didn't want to spend the time needed to print certain parts of the https://www.printables.com/model/560402-stargate-with-iris-80cm-in-diameter Chevrons with supports that were difficult to clean later. I also needed the central light to…
Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…
All plate, modified LEGO Brick from the application LEGO Studio. 27 real Bricks LEGO (with the logo on it)
*** UPDATE *** Apparently the front arms (that I didn't modify) were an issue, so another user has done their own remix to fix those up too, which you can find here:…
I've uploaded these here as there appeared to be interest on a Reddit thread but note that this is a work in progress. The main guides and parts were all printed in Yellow Elegoo PETG Rapid and the rise blocks in JAYO PLA+ Grey as I ran…
