Search results: mount

Sort order

99,038 models

P
Printablesniklasbartsch

Apple TV 4K Wall-mount

You don't need to use any support. I welcome your feedback!

Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant

Downloads
5,757
Likes
363
Rating
4.88
P
Printablesfuchsr

Super PINDA (SPINDA, S.P.I.N.D.A) Height Adjustment Tool, mounts into 3030 extrusion

Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
4,931
Likes
992
Rating
4.88
P
Printables75echo

'Gem rock' mount for your articulating dragon

Printed at 0.3 mm layer height in about 4 hrs. designs to print with no infill and no supports. There are 2 holes under if you want to put an led light source to illuminate your gem crystals likewise you can paint the rock formation and…

Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant

Downloads
4,301
Likes
1,620
Rating
4.83
P
PrintablesKYZ Design

X45 Sprite CR Touch Probe Zero Y-Offset Mount v1.1 (Ender-3 S1 Pro and similar)

Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
3,583
Likes
526
Rating
4.85
P
PrintablesDaHouzKat

Multifunction Arm mounting system Spinning Adapter

360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
3,142
Likes
1,825
Rating
4.63
P
Printablesbrahoy

Apple TV 4K Mount - Wall/TV Stand

My Apple TV quickly accumulated dust while it was sitting under my TV. I wanted a holder that I could attach to either the wall, VEGA mounting brackets on the back of the TV, or use 3M Command Strips depending on where the TV and Apple TV…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,742
Likes
224
Rating
5
P
PrintablesTinkrMakr

Prusa MK3S (MK3S+) Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief

Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…

Print approx. €1.67–€2.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,669
Likes
521
Rating
4.82
P
PrintablesMehTechArt

Nissan Skyline GT-R R34 Wall-mounted

Please click if you appreciate my work :) A cult icon. The Skyline R34 – now on your wall. This 3D printable wall-mounted model of the Nissan GT-R R34 brings the legendary JDM shape into a minimalist, display-ready form. Its signature…

Print approx. €12.40–€15.16 excl. taxPreliminary estimate for one variant

Downloads
2,384
Likes
783
Rating
5
P
PrintablesIBI Productions

AirTag bike saddle mount

This mount has been designed to conceal an airtag under a bike saddle, between the metal rods usually found under it. Why another bike saddle mount for airtags I know, there are numerous designs out already, exactly like this one, but all…

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
2,381
Likes
447
Rating
4.83
P
PrintablesPoulpi

Lego Saturn V wall mount

Wall mount for Saturn V Lego model composed of a base and a top clamp. Base: There is two options for the base: DETAILED version: Three stands wall mount base that sits below first stage boosters. Base has one solid 5mm mounting hole that…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
2,019
Likes
405
Rating
4.84

Earth Rated Dog Poop Bags Roll Dispenser - Wall Mounted, No Supports Needed

Holds 10 rolls of bags and has screw holes to be wall mounted, or use two sided tape/Command Strips to attach. Bag rolls are about 30mm in diameter and 61mm wide, so this dispenser might work with others. Initially designed without the…

Print approx. €8.50–€10.39 excl. taxPreliminary estimate for one variant

Downloads
1,874
Likes
588
Rating
4.93
P
Printablesbasti30

Christmas decoration with traditional mounting

Simple Vase Mode Christmas decoration with traditional mounting hole. Take the mounting wire and cap of an old or broken Christmas ball and insert it in the cylinder. Available for 8mm, 10mm, 12mm and 16mm mounting cylinder. I used 8mm.…

Print approx. €4.40–€5.38 excl. taxPreliminary estimate for one variant

Downloads
1,785
Likes
530
Rating
4.93
P
PrintablesWeshape

Apple TV wall mount - 4K (1st gen & 2nd gen) also Apple TV HD

We designed this print, to get the Apple TV mounted to the wall. Must be mounted with 3 screws. Fits the following Apple TV models Apple TV 4K (First gen) Apple TV 4K (Second gen) Apple TV HD . Does NOT fit the TV 4K third generation! For…

Print approx. €3.71–€4.53 excl. taxPreliminary estimate for one variant

Downloads
1,570
Likes
145
Rating
5
P
PrintablesCVD

Toothbrush + Induction Charger Wall Mount (Oral-B & Philips Sonicare)

At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…

Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant

Downloads
1,376
Likes
250
Rating
4.88
P
PrintablesPeter Farell

Predator Head Trophy Wall Mount

Predator Head Trophy (Wall Mount) Just found out about the negative parts you can add in the Prusa slicer add parts gallery. This is very useful.

Print approx. €21.30–€26.03 excl. taxPreliminary estimate for one variant

Downloads
1,211
Likes
277
Rating
5
P
Printablesschwa

iMac Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,182
Likes
71
Rating
5
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Print approx. €1.17–€1.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,179
Likes
287
Rating
4.97
P
PrintablesRobC

Tablet Tripod Mount

I remixed this tablet tripod mount and made the following changes: Increased the thread size on the post and nut for an easier fit. Redesigned the main post for horizontal printing without supports. Redesigned the clamp to match the…

Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,134
Likes
120
Rating
4.8
P
PrintablesPhilippHee

Dyson V11/V10/V8/V7 Accessory Mount/Holder / Zubehörhalterung

Dyson V11/V10/V8/V7 Accessory Mount/Holder Additional double holder for Dyson accessories as wall mounting. This mount has only been tested with the V10, but it should also work with the V7, V8 and V11. This is a remix (original is from…

Print approx. €3.51–€4.28 excl. taxPreliminary estimate for one variant

Downloads
1,123
Likes
110
Rating
4.96
P
PrintablesBerntzone

Prusa Mini Raspberry Pi Camera V2.1 Mount [THICC]

A Remix of Tinkr3d's great pi camera mount for the Prusa Mini. I realized my Pi Camera was raised about 2mm at the sensor, which made it impossible to fit in the original design. This design should now take this kind of Pi Camera…

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for one variant

Downloads
1,115
Likes
138
Rating
4.74
P
PrintablesGurtKnev

DJI MAVIC AIR 2 10" tablet mount

Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This design should fit most 10 inch tablets. Print instructions Model needs supports to be printed. works best oriented on its side for strength. printed…

Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant

Downloads
1,077
Likes
81
Rating
4.93
P
Printableskarelv

Prusa i3 MK3s Raspberry Pi4B case profile mount for octopi

My first remix design for a 3D print! I added the hooks to the case such that it can be screwless mounted to the horizontal profiles at the bottom of the prusa MK3s printer. RPi4B case:…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,051
Likes
174
Rating
4.84
P
Printablesschwa

MacBook Pro Continuity Camera Mount

A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an MacBook Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
1,047
Likes
85
Rating
4.8
P
PrintablesWeshape

Apple TV wall mount - 4K (3rd generation)

Simple wall mount for your Apple TV, so it doesn't have to lie and float, but can instead hang neatly on a wall. Fits Apple TV bracket 4K (3rd generation) ATTENTION Does not fit the older models! Apple made the 3rd generation 4K slightly…

Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant

Downloads
1,002
Likes
46
Rating
5
P
PrintablesAndrew Fiorello

Ender 3 V2 Neo X Axis Camera Mount

This is a webcam mount for an Ender 3 V2 Neo printer. It's made to press fit over the X Axis bracket and belt cover on the right hand side of the printer while leaving access to the belt tensioner knob. You'll need a screw to mount the…

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant

Downloads
942
Likes
94
Rating
4.83
P
PrintablesAdam Oellermann

Logitech C270 Tripod Mount

A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
921
Likes
87
Rating
5
P
PrintablesColgS3b

Nikon lens end cap F mount

Cover for the mount side of Nikon lenses. Tested with: AF-S NIKKOR 16-80mm 1:2.8-4E ED NIKKOR-S Auto 1:1.4 f=50mm NIKKOR-Q Auto 1:3.5 f=135mm Rokinon 1:1.4/85mm AS IF UMC Designed in FreeCAD Print instructions Print with the open side up.…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
817
Likes
72
Rating
4.4
P
PrintablesSeppo

Smartphone Stand tripod Stativ Modular Mounting System

This is a very practical smartphone stand / tripod, wich is perfect in many usecases. For assembly, you will need: 1x M5 65mm bolt 2x M5 25mm bolt 3x M5 nut Feel free to share your own experiences with the community! This smartphone stand…

Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant

Downloads
815
Likes
105
Rating
4.8
P
PrintablesNeonLabs

Parametric Continuity Camera Mount

The new continuity mode for iOS and MacOS allows anyone to turn their iPhone into a webcam. The problem is not everyone has an Apple Studio Display or another specific display. The same goes for iPhone models and phones with cases. The…

Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant

Downloads
754
Likes
72
Rating
5
P
PrintablesGurtKnev

DJI MAVIC AIR 2 8" tablet mount

Adapter for mounting a tablet in the phone mount of the DJI Mavic air 2 controller. This was designed to fit a Lenovo tab4 8 inch tablet, but might also fit 7 - 9 inch tablets. Print instructions Model needs supports to be printed. works…

Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant

Downloads
711
Likes
73
Rating
5
P
PrintablesPhysics Dude

Macro lens adapters for Nikon F-mount

Look at those two sample pictures! Wow! You can now give any Nikon F-mount lenses or adapters a super macro super power! UPDATE: Added a new retention ring for lens-side mounting. No tools or rubber bands needed! Just snap it onto any…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
709
Likes
116
Rating
4.9
P
Printablesrsdesign

Airtag Bike Saddle Mount with M3 Heatinsert for Ergon and SQLabs saddles

Using this mount on my ERGON mtb saddle, also changed the mounting for SQLabs. Top and bottom pieces are now in one .3mf file. So download the one the suits you saddle. (I tested these on MTB saddles, so your mileage may vary.

Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant

Downloads
689
Likes
78
Rating
5
P
Printableselod

Trustmaster T300RS and Logitech G29 pedal to Playseat challenge mount

v2 of the mount, very easy and fast to install with 8 large zip ties and 4 pcs M6 x25 screws the Logitech G29 pedal to Playseat challenge seat Also working with Thrustmaster t300 RS Print instructions PETG, print 2 times the G code or 4…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
617
Likes
60
Rating
5
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
614
Likes
48
Rating
5
P

iPhone Monitor Mount for Apple Continuity Camera

Here is my iPhone Monitor Mount, the perfect solution for using your iPhone as a webcam during Zoom and other FaceTime calls. This mount is designed to work with a Viewsonic monitor and may work with a variety of other monitors. This…

Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant

Downloads
610
Likes
29
Rating
5
P
PrintablesFotone

Raspberry Pi Camera Mount for Prusa MK3 S

Ho disegnato un supporto, leggerissimo, da collegare ad incastro sull'asse Z per la Raspberry Pi camera e la stampante Prusa MK3S e credo anche MK3. È formato da tre pezzi e si stampano tutti senza supporti in orizzontale. La Pi camera è…

Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant

Downloads
604
Likes
86
Rating
4.86
P
Printableseagereyes

Pinhole for Nikon Z-Mount

A pinhole "body cap" for Nikon Z-mount. The printed parts are just the holder for the actual pinhole, you'll have to make one or buy one on Ebay (I got mine from fireseller66, a .15mm). Printed in black PLA, it's completely light tight…

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
594
Likes
65
Rating
5
P
PrintablesC3PO

wall mount for Sonos Beam

I was using the cheapest PLA on the planet because you will not see the holders behind the speaker. But I'm pretty sure the print quality can be improved with better filament and maybe supports (haven't tested). CAUTION! Definitely print…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant

Downloads
567
Likes
43
Rating
5
P
Printablesbgh

Quad Lock mount for Yamaha MT07 FZ07

Just a simple mount for Quad Lock with dampeners for a Yamaha MT-07 with LCD-display. It has a structural design and should be pretty sturdy, but I take no responsibility if it breaks ;) It requires a M5 heat insert, I use M5x9,5x7 mm.…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant

Downloads
562
Likes
35
Rating
5
P
PrintablesTipTop

DJI RC Mounting Plate (e.g. for bikes and bicycles)

This mounting plate results in a very robust mount for the DJI RC remote control, such as those offered for the DJI Mini 3 Pro drone. The mount is tailored to the remote control and intended for outdoor use, especially on bicycles. Note:…

Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
557
Likes
86
Rating
0
P
PrintablesDaHouzKat

Prusa MINI Articulated Raspberry Pi Camera Mount REMIX

This is a REMIX of the Articulating Raspberry Pi Camera Mount for the Prusa Mk3 Note that i did not modify or create new components, i assembled some components together to obtain a simple Raspberry Pi Camera Mount for the Prusa Mini Thx…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
554
Likes
132
Rating
4.97
P
PrintablesZurrie

Nikon fmount lens to MFT m43 camera body

Print in PETG for complient flex of the F-mount print in BLACK to absorb any stray light. Have fun big hugs bye

Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
537
Likes
34
Rating
5
P
PrintablesMathieu

Castle Mountain (Multicolor/Multimaterial)

EDIT 1: (Featured in the Prusa YouTube video about 3MF files!) EDIT 2: (Also featured in Weekly 3D Prints #47!!!) This serves as a sequel to my recently-published Castle Tower. I began an introductory course with Autodesk Maya and decided…

Print approx. €12.03–€14.70 excl. taxPreliminary estimate for one variant

Downloads
530
Likes
88
Rating
5

Smartphone mount for indoor rowing machine (Concept2 Rower PM5 monitor)

You want to use your smartphone on a Concept2 indoor rowing machine, and not ruin your posture while doing so? Now you can! As a rowing coach I did not like it when my rowers put their smartphone on the handlemount, because it makes them…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
501
Likes
49
Rating
5
P
PrintablesWhistleR

Makita charger wall mount (easy removable)

Makita charger (DC18RC) easy removel, easy to maunt whit the tamplate. Maunt the template Put the 4 wall mounts in to the template Maunt the feet on the charger Or use them to what ever you see fit

Print approx. €4.34–€5.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
493
Likes
182
Rating
5
P
PrintablesBlownUpp

ADXL345 mount for FLsun Super Racer

I wanted a secure way to mount the sensor with stock hardware, sine the other mounts for the Super Racer were just integrated or dependent upon custom effectors and hot ends. I also didn't want to make any permanent changes to the…

Print approx. €0.57–€0.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
486
Likes
38
Rating
5
P
PrintablesMehTechArt

Mitsubishi Lancer Evolution V Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 The rally legend – now on your wall. This 3D printable model of the Mitsubishi Lancer Evolution V is a tribute to one of the most aggressive and iconic 90s performance cars. Wide fenders, a…

Print approx. €13.87–€16.96 excl. taxPreliminary estimate for one variant

Downloads
480
Likes
203
Rating
4
P
PrintablesNathanK

Non-MagSafe IPhone Continuity Camera Mount for MacBook Pro

This is a remix of samlovecroc's “Non-MagSafe iPhone Holder for Continuity Camera” that will support the MacBook Pro's screen depth and larger iPhones including those with cases on. The form of samlovecroc's design is preserved the…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant

Downloads
461
Likes
42
Rating
3
P
Printablestwiss

Prusa MK4/MK4S Camera Mount

Crafted with a versatile 1/4"-20 configuration, this camera mount effortlessly harmonizes with a wide range of compatible tripods and photographic equipment, guaranteeing seamless compatibility. For attachment to the MK4 chassis, I…

Print approx. €1.07–€1.30 excl. taxPreliminary estimate for one variant

Downloads
458
Likes
146
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Flat Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…

Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant

Downloads
432
Likes
143
Rating
5
P
PrintablesBiTN

TP-Link Tapo C100/C110 GoPro mount

GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
432
Likes
48
Rating
5
P
Printablesvolly

IKEA KOPPLA slide- / tail-mount

Print recommendations no support needed print with the smallest side on the bottom for optimal results position the model with the long side in the same direction as the printers base plate is moving while printing Will match to IKEA…

Print approx. €1.92–€2.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
431
Likes
61
Rating
5
P
PrintablesAladoW

Double Universal Out-front Mount Garmin / Double Support frontale Garmin

Double Universal Out-front Mount, for Garmin accessories. Use m3 screw/nut to close the fixation. V2 : rework fillet on fixation to the bike Printed in 0.2mm layer height, 20% filling with PLA+

Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant

Downloads
425
Likes
43
Rating
4.4
P
PrintablesGyoenastaader

ASIAIR Losmandy Mount

The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…

Print approx. €1.60–€1.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
421
Likes
34
Rating
5
P
Printableszbuser

Alesis Electronic Drum Clamp Mount

This drum mount is sized for any Alesis brand electronic drumset. its made to clamp a 38mm tube on the big clamp and a 19mm tube on the small one. It is printed in two parts and epoxied together so that each clamp can have the optimal…

Print approx. €6.35–€7.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
418
Likes
50
Rating
5
P
PrintablesOliver Thomsen

GoPro like mount for bike saddle

I've also created a GoPro compatible mount for the rails of a bike saddle in order to use it with my SIGMA BLAZE mount ( https://www.prusaprinters.org/prints/61869-sigma-blaze-mount-gopro-compatible ). The mount snaps on top of the rails…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
409
Likes
74
Rating
4.75
P
Printableslars

Nikon F mount microscope adapter

I wanted to mount my DSLR to an old Olympus VMT microscope. Found a fitting camera attachment (on ThingiVerse) and made a remix with a fitting cylinder for the microscope. Also made one for a cheap Bresser Microscope (but it doesn't…

Print approx. €2.31–€2.83 excl. taxPreliminary estimate for one variant

Downloads
388
Likes
44
Rating
5
P
Printablesbjamdesign

Bike - Wall Mount for Thru-axle bikes

A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…

Print approx. €7.97–€9.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
83
Rating
5
P
PrintablesEttil Vrye

Brompton Apple Airtag Rear Light Mount

This is a small Apple Airtag mount for the original rear light-reflector of the 2022 Brompton folding bicycle. I don't wanted to put it under the saddle so I searched for another place where I can put it. I designed it so the seat post…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
382
Likes
53
Rating
5
P
Printablesian123411

camera mount

camera mount hooks on to the side of the extrusion on the Prusa i3 mk3s I have a magnetic base on my camera so I have screwed the metal plate that came with it which holds it in place or it can just sit on top the last picture is the view…

Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
381
Likes
57
Rating
5

HelloBaby Baby Monitor Mount Adapter

This should work with the HelloBaby camera models: HB6550/ HB65/ HB6339/ HB40/ HB6081/ HB66/ HB6351 (but it was only tested on the HB6550Pro model). The original adapter to HelloBaby flex mount broke for me, so I made this to replace it.…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
363
Likes
16
Rating
0

Articulated mount Sonoff SNZB-03 Zigbee motion sensor

The 3D printed mount is designed to perfectly fit the Sonoff SNZB-03 Zigbee motion sensor, ensuring a snug and secure fit. Whether you prefer a more permanent installation with screws or a flexible and removable option with magnets, this…

Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant

Downloads
360
Likes
64
Rating
4.75
P
PrintablesKent Prints

Nest Cam (outdoor or indoor, battery) mount plate

This is a mount plate for the Nest Cam (outdoor or indoor, battery) https://store.google.com/product/nest_cam_battery?hl=en-US Google don't/won’t sell these. Pictured at 3:26 in the video above. https://youtu.be/x2-RRXMj-cs?t=206…

Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant

Downloads
350
Likes
27
Rating
5
P
PrintablesTych0

ASIAir+ Tripod Mount

Introduction: I wanted a way of mounting my AAP to my tripod, and then I remembered I have a 3D printer! This clamp mount is a fairly simple, but a secure and effective way of relocating your ASIAir/Pro/Plus to a 1.75" diameter tripod leg…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant

Downloads
339
Likes
31
Rating
0
P
PrintablesAnheledir

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Print approx. €5.39–€6.58 excl. taxPreliminary estimate for one variant

Downloads
330
Likes
47
Rating
4
P
PrintablesJeffL

HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink Wall Mount

This is wall mount for the HP USB-C/A Universal Dock G2 Thunderbolt DisplayLink. See link for more details on the dock. https://www8.hp.com/h20195/v2/GetPDF.aspx/4AA7-5549ENW.pdf Printed in PETG, no supports required.

Print approx. €5.27–€6.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
327
Likes
31
Rating
5
P
Printablesrursache

TP-Link Tapo C100/C110 mount for Elegoo Neptune 4 Pro

How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
326
Likes
55
Rating
4.25
P
PrintablesNlKO33

truelife NannyCam V24 mount

Truelife NannyCam V24 Mount Easy way to mount the cam to anything smaller than 25mm. Suggest 0.1 layer height for thread precision *update 13/01/21 - added a deeper bore version (original is 7mm, long version is 14mm deep) as per…

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant

Downloads
326
Likes
12
Rating
4.83
P
PrintablesMordiev

Hanging Mount for Rubbermaid 21 cup Drybox

This simple mount allows you to hang your drybox from the underside of a shelf or enclosure. Print instructions .2 mm layer height 3 or more perimeter walls This is a remix of this thing on Thingiverse by customyota . Mine has a tighter…

Print approx. €2.23–€2.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
309
Likes
65
Rating
4.8
P
PrintablesSylvain

Unify USW 8 Lite Poe Powerbrick Mount

Unifi Switch Lite 8 port POE based on remix of Unifi Flex XG power Brick wall mount by RockNLol I just resized model to adapt to power brick of the switch (115% bigger)

Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
308
Likes
20
Rating
5
P
PrintablesEric T

Skadis T-Clip XL Tape Measure Mount

I like the ease of printing of the Skadis T-Clip design but could not find a tape measure holder that was large enough so I designed my own. This will hold a tape measure 47mm deep. The T-Clips can be found below. Be aware that the…

Print approx. €2.52–€3.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
306
Likes
51
Rating
5
P
Printablesarcanelayers

Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
303
Likes
30
Rating
5
P
Printablesdom.3D

BMD MicroConverter mount

Bracket to mount a BlackMagicDesign Micro Converter (SDI-HDMI) on a surface.

Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
296
Likes
36
Rating
0
P
Printablesbjamdesign

Bike - Cateye rear light saddle rail mount

I needed a dropper compatible under saddle mount for my cateye rapid mini. I really liked my solution for Ergon Saddles , and copied the design over to the saddle rail interface from this solution . IMPORTANT NOTE : PETG will creep, I…

Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
289
Likes
31
Rating
0
P
PrintablesAtle Berg

Unifi USW Flex Mini Wall Mount

Remix of model by Paul-Vincent Roll. Made to be mountable on regular wall with screws instead of on pegboard.

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
282
Likes
20
Rating
5
P
PrintablesRanchBear

LEGO Technic Porsche 911 RSR #42096 Wall Mount (Spoiler Up)

Vertical Wall mount for LEGO Technic Porsche 911 RSR #42096 (Spoiler UP), designed to used with Large Command Velcro adhesive strips Taking the 2 Black skid pads at the bottom helps it to sit closer to the wall You can move the stickered…

Print approx. €1.43–€1.75 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
36
Rating
0
P
Printablesstoneburner

Continuity Macbook pro Magsafe Mount

This is supposed to be used to hold your iphone above your macbook pro in order to use its camera as webcam. If you use a non apple magsafe charger with a slightly different diameter you can adapt the size in openscad.

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
264
Likes
51
Rating
5
P
Printablesbjamdesign

Bike - Ergon saddle Cateye light mount

A rear bike light mount specifically for the Cateye rear lights (specific models below) to mount under an Ergon QuickClick supported saddle. Ultralight and sturdy! Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
261
Likes
33
Rating
5
P
PrintablesLeokaldzik

Bicycle holder for the JBL GO 2 speaker | JBL speaker mount

!!! To avoid scratching the frame, it is best to line the center with something soft (old handlebar tape, bicycle inner tube). !!! Maximum pipe width 40mm, height depends on the screws used (you can print) Sample link:…

Print approx. €1.38–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
251
Likes
93
Rating
4
P
PrintablesNewTeq

LEGO Discovery Space Shuttle Wall-mount - Without support

Space Shuttle wall mount I redesigned the model from JLevin to print it without support. Print settings: PLA / PETG (recommend) min. 20% infill To fix it on the wall, I used screws with a 5mm diameter. I also recommend some higher angle…

Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
39
Rating
0
P
Printablesnero82

Philips Hue motion sensor mount

Here I have created a small angled mount for Philips Hue motion sensors. The mount is meant to be used together with the original mount. It should be possible to fix it with a screw or some kind of glue. For my picture I used an adhesive…

Print approx. €0.54–€0.65 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
21
Rating
5
P
PrintablesKlaus

Einhell Agillo Cordless Scythe wall mount / Wandhalterung Akku Motorsense

This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!

Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
238
Likes
24
Rating
5
P
PrintablesRyan-N2YQT

DJI Mavic Air 2 8" tablet mount for iPad Mini, etc.

This is a remake of GurtKnev's 8" tablet holder that is a little narrower to better fit my case. YOU MUST USE SUPPORTS I ignored supports in my first print by accident, but the piece was designed so well that it still worked fine, even…

Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
232
Likes
25
Rating
0
P
Printables100prznt

Hue MotionSensor Corner-Mount

A mount that allows the Philips Hue MotionSensor to be installed in a corner.

Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant

Downloads
232
Likes
30
Rating
5
P
PrintablesPBJ

Space Saving - Outlet or Light Switch Mounted -Tooth Brush Holder

The “ Space Saving - Outlet or Light Switch Mounted -Tooth Brush Holder ” attaches to the right or left of a decorated or plain electric socket or light switch cover. The decorations on the covers are simple Greek inspired floral…

Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant

Downloads
227
Likes
88
Rating
5
P
Printablesmih

Lenovo TAB M10 FHD Plus Wall Mount with Charging

Wall mount for tablet lenovo M10 FHD plus with the possibility of inserting a charging cable with the charger embedded in the installation box in the wall. The box is composed of two parts, after taking off the top part, the tablet can be…

Print approx. €15.22–€18.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
223
Likes
15
Rating
5
P
PrintablesMehTechArt

BMW 850 CSi E31 Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 The Bavarian V12 masterpiece – now on your wall. This 3D printable model of the iconic BMW 850 CSi (E31) offers a sleek, minimalist tribute to one of the most elegant and powerful grand…

Print approx. €11.64–€14.22 excl. taxPreliminary estimate for one variant

Downloads
221
Likes
62
Rating
5
P
PrintablesWittmarch

Wall mount for filament/spool holder, IKEA PLATSA

Filament holder wall mount for Ikea PLATSA, need the "Filler - Filament Holder" Remixed from this wall mount: https://www.thingiverse.com/thing:4397167

Print approx. €5.60–€6.84 excl. taxPreliminary estimate for one variant

Downloads
220
Likes
40
Rating
5
P
PrintablesDominik

Sonoff Zigbee 3.0 Dongle Skadis Mount

Based on whocares333's Sonoff Zigbee 3.0 Dongle Mount. I added two hooks to mount this sideways on a Skadis peg board. Printing needs some supports for the holding brackets and the Skadis hooks.

Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant

Downloads
219
Likes
31
Rating
5
P
Printablessh

GoPro Mount Base FOR WIDE angles (import this into your GoPro Mount design)

Modification of original for: better angles of camera adjustments (on both sides) camera can be fixed in about 180 degrees Adapter itself: massive on both sides - this is IMPORTANT against other adapters - not to be broken during…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
8
Rating
0
P
PrintablesBUDS3D

NEST CAM INDOOR/OUTDOOR DESK /SHELF MOUNT

GOOGLE NEST CAM DESK/TABLE/ SHELF ANY FLAT SURFACE MOUNT. CREATED THIS FOR MY BATTERY NEST CAM. TWO PIECE DESIGN, TOP SNAPS INTO BOTTOM FOR A TIGHT FIT, IF YOU LIKE YOU CAN ADD 2 DROPS OF SUPERGLUE FOR A PERMANENT FIT. LISTED ARE TRIED…

Print approx. €3.01–€3.67 excl. taxPreliminary estimate for one variant

Downloads
217
Likes
19
Rating
5
P
Printableslmilekic

Lego Discovery Wall Mount

To fit on the mini+ build plate you need to tilt it back and add supports. You shouldn't actually need any supports on the back, but PrusaSlicer likes to add a few random ones. Aside from that, just print and screw into the wall. It fits…

Print approx. €13.84–€16.91 excl. taxPreliminary estimate for one variant

Downloads
216
Likes
28
Rating
5
P
Printablespatrickzell

Mount for bicycle backlight under saddle

Mount for a small battery led backlight under your bikes saddle

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
213
Likes
34
Rating
5

Traxxas 4tec 2.0 Chassis Spoiler Mount

*New Update just up-loaded: 01-22-2025 “File name labeled with UPDATE-v2.” See file for further update details. **New Update just up-loaded: 02-01-2023 “File name labeled with UPDATE.” See file for further update details. ***Had to brace…

Print approx. €3.02–€3.69 excl. taxPreliminary estimate for one variant

Downloads
203
Likes
17
Rating
5
P
Printablessascha

Nvidia Shield TV 2017 / 2019 Pro VESA 100 mount

This mount is meant to to be mounted to a 100x100 VESA mount.

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
203
Likes
23
Rating
0
P
Printableschrisxbarb

Wall mount for shower squeegee | Aufhänger für Duschabzieher

Quick and easy print for a shower squeegee wall mount. Printed it from PETG and mounted it with double-sided tape (didn't want to drill holes in the walls). Works since months. If you like it, give me a like and post your make! Enjoy and…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
200
Likes
23
Rating
5
P
PrintablesApproxit

Arducam IMX219 Auto Focus Camera Module cover for Articulating Raspberry Pi Camera Mount

After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
199
Likes
20
Rating
5
P
PrintablesoXiVanisher

Chipolo one tracker mounts for bike saddles

Use m3 x 12 mm screws and nuts to mount the trackers. The designs are for the following saddles: Ergon Large (4 screws) Selle Royal Ariel (2 screws) Edit 8.6.2026: Upload new Selle Royal Ariel version, since the last might be too snug for…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
198
Likes
21
Rating
5
P
Printables100%FAT

ZOTAC ZBOX 1060 VESA Mount Bracket

We created this bracket for the ZOTAC ZBOX Mini PC to use in our interactive table made for Sekisui Plastics. The bracket allows any of the previous and current ZBOX Mini PC's to be mounted to any surface. The VESA mount holes on the…

Print approx. €15.28–€18.67 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
7
Rating
0
P
Printablest0b1

Koppla wallmount

Mounting bracket for IKEA KOPPLA power strips. This is a rather trivial remix of @telegnom's Koppla Wallmount (Euro Version): https://www.thingiverse.com/thing:1687838/ Thanks @telegnom for sharing. ☺ Edit: I have added the OpenSCAD file…

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
194
Likes
29
Rating
5