4,910 models
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Easy 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…
Universal Ball Joint. Inspired and modified according to Universal Ball Joint model by DieZopfe (https://www.thingiverse.com/thing:5020323) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: C-TECH…
This is a series of test prints which were inspired by the following MIT publication : Snap-Fit Joints for Plastics - A Design Guide https://fab.cba.mit.edu/classes/S62.12/people/vernelle.noel/Plastic_Snap_fit_design.pdf While the above…
I designed for my wife a point tuner to easily arrange the corner without damaging the fabrics. To print in PLA with 0.4mm diameter and layer of 0.2mm.
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
I recently had someone request that I make them a Jellyfish. I found a nice articulated model on Thingiverse but it had some issues with the .stl files and also required glue. I decided to re-mix this model and eliminate the need for…
Suitable for color printing Outer diameter 10mm The inner diameter of the dot is 6mm Height 2mm Layer height 0.2mm Magnet with a diameter of 6 mm and a height of 1 mm (magnet holds without glue)…
joint case with cap instolled print in place. cap fixed to main body in 1 file with no supports. Satisfying feeling with opening and closing the cap. recomend printing with brim, after cap is finished is possible to crank up the speed as…
The clips supplied with the general car mounts don't hold well and that bothered me. Inspired by various similar holders, I came up with this version, which can be printed horizontally. The horizontal printing position improves the…
For the articulated arm that holds the RaspberryPi camera on my Prusa Mini, I needed a way to fine adjust the viewing angle of the camera. So I opted to design a ball joint. I did a number of prototypes to try out how much the socket…
To be able to clamp round parts i designed a 3 point clamp that can be printed. Its not that easy to print since good tolerances and strong parts are needed. Better tolerances lead to less play and therefore better clamping. I used 4…
Introduction This is a concept for greenhouse based upon a geodesic dome using 3D printed articulated joints, PVC pipes, and greenhouse plastic. Unfortunately I don't have the funds at the moment to realize the full concept but the 3D…
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Printed in PLA Plus, .2mm layer height and organic supports
This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…
Special design of joint case made by ROPI. ASA, PETG, PLA - all fillaments will fit, easy to print. Supports - NO! We can print this model without supports. Use Brim to make sure whole print is stuck to the printing bed. Fits well with…
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166). It is not an exact replica but a…
Cigarette / Joint Holder and Ashtray Short holder / Tall Holder attach to the ashtray base via 3x6mm magnets (or you could just glue them together). Magnets also can be added to the base.
Multiboard bottle holders in sizes from 20mm to 150mm. The flask / bottle holders uses the Multipoint connectors. Use one of the many connector types to mount the bottle holders to the Multiboard . The bottle holders has the same OXO rail…
Set layerheight to 0,2 mm in PrusaSlicer if you dont use the uploadet gcode. Disable brim.
My friends became tired of always getting punched from looking at the Circle Game. So I made them a Pointer Finger Blade for them to use to “Break” the Circle and get their revenge. Hope You Enjoy As Well!
This is a study on print-in-place articulation. I wanted a small anatomical figure that was jointed. I found other great designs where you print the respective parts then assemble, but scaling down caused difficulties as the smaller snap…
This is my model of TARS from the movie Interstellar. TARS body consist of 4 legs, this model uses magnets to form joints and keep everything together. The magnetic joints slides along the full leg length which makes for a very flexible…
I designed this simple nine-point star with a bulgy shape and soft round corners as a decoration piece. The primary use of this design is as a nice decoration piece to hang on ribbons or glue on the wrap of gift packaging. To make it…
This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…
This is ball mount joint for a Logitech C920 camera that allows it to directly attach to the ball nut from the Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2. This allows you to remove the standard mount from the C920 and…
Multiboard connector for items with mounting points for regular screws. Can for instance be used to connect Ryobi chargers to Multiboard. Recommended print settings (same as Multiboard defaults): 3 wall perimeters in wall thickness 15%…
Very easy stand design for Omada AX1800 (EAP615) Wall Plate WiFi 6 Access Point Other materials than 3D printed models? Two M3 bolts
Allows for a single place/tool to hold your billiards cue joint protectors while not in use.
Pour immobiliser deux pièces perpendiculaires à l'aide de serre-joints pour rail T-Track, utilisés dans les tables MFT. Compatible Festool FS-HZ 160, Festool FSZ 120, Festool FSZ 300, Bessey GTR16B6, Bessey GTR12, Bessey GTR16S6H (et tous…
This print is great for all levels of experience. The open lattice pattern looks great still, but even better while it's spinning. The openings form patterns that change based on the viewing angle and the speed it's spinning. Want to show…
Simple remix od this model by mijo11 made by my girlfriends request. Just modified one end to make it really pointy so it can be easier applied. Print with high infill or many perimeters, just to fill it as much as possible to make it…
Here is an adapter for mounting the very popular miniature vice “Nano Vise 2.0” as well as the “Nano Chuck” by PRima (remix of mdkendalls “2.5 Inch Three Jaw Chuck” ) on the Revopoint Dual-Axis Turntable. The holder can be attached to the…
This print is great for all levels of experience. The open lattice pattern looks great still, but even better while it's spinning. The openings form patterns that change based on the viewing angle and the speed it's spinning. Want to show…
The parts need to be clued. I used a wooden and a metal Ø 8mm axes.
Acquired a benchtop jointer second hand, but it was missing the dust port adapter. This works with the Delta 6" Variable Speed Bench Jointer as shown, and possibly works with the following as they all look like they are made in the same…
VASEMODE Cone (V 1.0) / normal print (V2.0) V2.0 Cone no supports or brim needed on textured plate 0,1 - 0,2mm layer height full perimeters Lit TPU recommended 0,1mm layer height if you use TPU 85A use a minimum of 3 or more perimeters…
Printed with single extruder using M600 to change filament. Original files can be downloaded here .
With the REVOPOINT INSPIRE 3D scanner you find supplied a small 12cm revolving table, and a large 20cm black marked table top to scan larger objects. Unfortunately the table top is thin vinile and does not keep the top surface flat, and…
Designed this print to help me dial in each location in a 25 point manual mesh bed leveling grid (individual offsets can be edited). It is an improvement on my previous test pattern as it now searches for the correct Z height when…
1 central 4 left 4 right sticks folie
A C&C or C and C joint that works for all C&C Plastic Panels and or C&C Wire Cage panels. Designed this based off the exisitng C&C joints as they have a habit of breaking!
This is a fully functional retractable ballpoint pen (click pen) . It combines elegance, reliability, and practicality , making it a stylish everyday writing tool. Retractable click mechanism : smooth, precise, and long-lasting…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
Double-breasted dovetail joint partially embedded, teaching aid for joiner and carpentry in secondary schools. Oboustrabbý rybinový svlak částečně zapuštěný, výuková pomůcka pro obory truhlář a tesař středních škol.
This is my very minimalistic design of a five-point star decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the middle…
Most tools you can purchase are either too small or built more for pottery clay or cake decorations. This design as well as others in the collection are for bigger hands plasticene (non-drying) type clays. At this point, I call this a…
This model of a vase is inspired by the stunning basalt columns at the Giant's Causeway in Northern Ireland. The model can be combined with a glass insert to make it waterproof. The glass insert can be easily removed for easy cleaning.…
This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…
Simply said, original from paw patrol tent joint was weak for kids :) So created robust one. Easy to print. Dimensions: rods diameter 1,1 cm total height: 8,5 cm width: 5,7 cm / 5,7 cm Print instructions: see 3mf file PETG easy print
I realised that the printed ball joints for my Bamboo Toyota FJ40 are too big. However, I have installed them all. Now I need to remove them and install a smaller - scaled ones. This is the tool to uninstall them with vice or hammer. No…
My grandfather's old Mont blanc ballpoint pen came with the longer “Riesenmiene”. Current refills are a litte shorter than this giant refill. To use current refill, you need to putt an adapter at the end of the refill. In the past you got…
(pour le français, voir plus bas) Dot pot with drain holes (vase mode only) with the plate ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Pot à points avec trous de drainage (en mode vase uniquement) avec un plateau
8020 1010 1"x1" curtain or bungee sliding attachment point
I created insets for the Revopoint Inspire 2 camera, tripod, phone holder, cables and mini turntable and Lids with Logos for the 180x180x50mm case. Printed with PETG.
I created these to go in the box with the excellent “Flash point” central organizer by @Hammeredagain_208628 ( https://www.printables.com/model/350334-flash-point ). I have included it and pdf details as an extra .zip file. If you like…
Top Thrill 2 is the new 2024 Rollercoaster for Cedar Point. Either use the .3mf project file in prusa slicer to automatically add the color change commands or print with the following settings: PLA is preferred but all colors should just…
A smooth running 4 point-contact ball bearing with a printed cage. Required components: 16x 5mm steel balls 4x M3x8 DIN7991 screws The amount of play (up to a certain degree) is adjustable with the 4 screws. Possible use cases: Learning…
!! Attention: See the new upgraded model here ! !! While the original print-in-place bearing is fantastic and works very well, the nature of the print-in-place arrangement means that the underside of the top part ends up a little messy.…
Filament used PRUSAMENT Galaxy Black PRUSAMENT Pearl Mouse 3DJAKE magicPLA Frozen Gold
This is my very minimalistic design of a five-point star frame decoration. I created this and other similar designs like table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in the…
New version with clip and upgraded thread. You must glue the clip to the body. 3D printed retractable external body for BIC's ink bodies. Cylindrical and hexagonal shaped versions. No supports neccesary. Printed in Prusament PETG. Once…
This is a remixed fingerboard with the “ MINI 13 Printable Jointed Figure ”'s feet attached to it so you can put your own MINI 13 on there. Now you can ride around on rails, ramps and more! Orientation is optimised for printing, print…
Adds a bite point adjuster option to the levers of Magura MT7 brake systems. This allows adjustment of the amount of lever throw before the pads bite on the disc. Magura offers a BAT kit to try and do this but it doesn't really work and…
Slide on Laserpointer attachment for the Bugasalt V3 the attachment is slightly angled so that the laser is accurate at the optimal shooting distance at about 45cm - 1m this attachment is made for a cheap rechargeable cat toy laserpointer…
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
I designed these decorative six-pointed stars with a clean geometric profile, ideal for shiny or metallic filaments that highlight their intricate details. Each star includes two small holes at opposite tips, allowing you to create a…
Bouton-poussoir (diamètre 34) chasse d'eau avec joint
Here some more runway modules. I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Settings Value Infill 15% Perimeters 2 Layer Height…
This was printed in .04mm PLA .20mm layers 15% infill but also adjusted the horizontal shells bottom to be 5 printed with brim to prevent warping. large sleeves used:…
Game Rules Preparation and Objective The game is set up so that pieces fill every hole except the middle hole. The objective is to remove every piece except one, with the final piece ending up in the centre hole. Solitaire is played by…
This two sided tool is used by my artist wife to create textures and scrape on her canvas. I put one in my tool kit to occasionally use as a probe or scraper in tight spaces. It is printed in PETG with organic supports.
The Garmin DriveSmart 86 has a 22mm ball joint instead of the other model's 17mm, so this converter lets the GPS be used with the standard mounting equipment. For printing, I used: 6 Perimeters 100% infill .20 layer height I have tested…
For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell…
Simple and fast to print mount for homematic IP Access Point suitable for IKEA Skadis punchwall. You can easily hang the holder in the Skadis wall and attach the HMIP AP with its mounting holes / drill holes. I printed on a high…
Two grout floats in 2 different sizes: small (7 x 15.6cm) with handle smaller (7 x 10cm) with crim grip Don't forget to (hot glue 130C) add a foam float (I got mine from the hardware store), I recommend at least 5mm larger foam as the…
Description This is my very minimalistic design of a six-point star decoration. I created this and other similar designs as table and gift wrap decorations. Printed in various colours and sizes, it is a wonderful eyecatcher sprinkled in…
flash hider for airsoft https://www.printables.com/model/578627-fgc-6-fgc-9-mkii-stingray-flash-hider-14mm-ccw-for
Kryt vytvořený podle reálných rozměrů pin pointeru, tato verze č.1 hladká bez břitu je pouze zkušební a už se pracuje na vylepšené zesílené verzi s břitem, tiskl jsem to z PLA materiálu a myslím, že PETG nebo jiné pevnější materiály budou…
Short, sweet, and sturdy. Use these thread holders to organize and store your pre-cut threads for embroidery or needlepoint projects. A bit of masking tape gives you a writeable surface for labeling; peel it off and replace it for the…
A rotating score counter not only for dice games like Farkle. Increments are 50 points, range from 0 to 10,000 points. The assembly used 3x compression springs with a diameter of 7mm and a length of approximately 11.5mm and 3x steel balls…
I designed this simple seven-point star frame as an ornament with various uses: The variants with one hole can be used to hang them as decoration, but there are also variants with no holes - if you like to glue or tape them to a surface.…
This is a ground glass stopper for the standard ground glass size 29/32 mm. It has a rounded head and a pin from which condensate can drip back. Please check the material beforehand to ensure it is suitable for the intended use. Depending…
I found that the sliding arrow would slide and fall off with the original version, so I reduced the gaps to 0.1mm to prevent this. Be sure to print the arrow upright on its side as shown in the photo.
Ersatz für die rechte Endkappe unserer Arbeitsplattenabschlussleiste. Die Skizze ist ähnlich, der innnere Aufbau etwas anders. Translation: DeppL Replacement for the right end cap of our wall joint trim. The sketch is similar, the inner…
Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…
PETG 25% inf perimeter 3 layer 0,25
Object/type/model: Citroen C4 grand picasso 2015y. Part: Mounting point of battery holder Description: So citroen greatly design battery holder mounting point as you can destroy it on first unscrewing. But we know how truly save…
I remixed Walletclan3D's excellent storage cubby to reinforce it with ribs for weighted\loading, and thickened the front so I can install fasteners. I found the cubby too small for storing things, but I needed a spot for my GMRS radio…
Designed to hold up to 12 official Paizo metal hero point coins (~31mm diameter). Slip-on lid with engraving, thematic outer texture, and double groove for ease of access.
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
A ten-pointed star, created from joining two icosahedron crowns. A useful starting point for medals or awards.
A couple of years ago I broke part of a joint to an Outwell camping locker. I temporarily repaired it and now, thanks to a Prusa MK3S+ 3D printer and Fusion 360°, I've designed and printed a new one. I haven't installed it yet, it may be…
![[WIP] Skateboard Feet for Mini13 Jointed Figure](https://media.printables.com/media/prints/1159869/images/8752901_3c721bdb-acaf-4f79-88c3-d27d4d284780_66326204-39b6-42c4-b206-0c263737175f/screenshot-2025-01-23-195040.png)
