Search results: pcie

Sort order

286 models

P
PrintablesJackson O'Steen

PCIE Slot Covers

This is a bundle of 2 PCIE case slot covers as replacements for lost ones. 1 normal form factor, and one small form factor. I hate losing them and seeing this gap in my awesome PC. Thanks for taking a look, and happy printing :) 0.2MM…

Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
6
Rating
0
P
PrintablesRedstone

Inter-Tech Argus ST-7211 PCIe card backplate

10G server NICs are usually ugly green PCIe cards. Not a great fit for a gaming PC. But maybe you still want one for whatever reason. A backplate can easily fix this. This one is made for the Inter-Tech Argus ST-7211 and hides the ugly…

Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesSunshine

3D print PCIE slot for 120mm Fan to replace fans on GPU

It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…

Downloads
1,173
Likes
123
Rating
5
P
Printablespankomputerek

PCIE Bracket - Full Height Blank

Made from PCIE Specifications found at: http://read.pudn.com/downloads166/ebook/758109/PCI\_Express\_CEM\_1.1.pdf Note this is 0.2mm thicker than in the specifications as that makes it less fragile when printed. Print instructions…

Downloads
739
Likes
46
Rating
4
P
PrintablesMartinRowan

ZimaBoard Wall Mount for Generic PCIe cards

I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…

Downloads
728
Likes
42
Rating
5
P
Printablesjeepers01

Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ UPDATED 21Nov24

Raspberry Pi5 PCIe NVMe Case for Waveshare M.2 HAT+ ****************************************************************************************** **Update 21Nov24** There was a small blemish discovered to the button recess. This has now been…

Downloads
677
Likes
35
Rating
0
P
Printablesajatoledo

Lenovo Tiny PCIe I350-T4 Baffle/PCIe Cover

I printed the baffle using Jessie Premium PLA 1.75mm X Brad's Orange Glitter at 15% infill on my MK3s.

Downloads
558
Likes
39
Rating
5
P
Printablesjpdesign

PCIe Slot Covers

These covers are available in 2 versions: a solid and an airflow model. Keep in mind! the airflow model is not as sturdy as the solid one. Print like this:

Downloads
558
Likes
95
Rating
5
P
PrintablesITG Gear

3D model files for Dell Optiplex 3050 Micro Case SSD cage and M2 PCIe x16 adapter bracket

Elevate your Dell Optiplex 3050 Micro with these custom 3D printable model files designed to accommodate an MSI RTX 3050 LP graphics card. This set includes: 3D Case : A custom-designed case tailored for the Dell 3050 Micro, providing…

Downloads
502
Likes
52
Rating
5
P
PrintablesJulius3E8

PCIe card display stand with bracket support

Just your friendly neighborhood derivative of the PCIe card display stand with that little extra support for not-so-balanced PCIe cards. If you found this useful, it would bring me great joy to see your work - so be sure to share. :) Or,…

Downloads
469
Likes
46
Rating
4.86
P
PrintablesPatrik Zak

3.5 inch HDD bracket PCI slot PCIe holder

A bracket to hold a standard 3.5" hard drive in the PCI slot. It is better to print in PLA, than PETG. PETG is too flexible.

Downloads
426
Likes
39
Rating
0
P
PrintablesJohan

Qube 500 cover plate for PCIe slots

Like the title says, this is to cover up the gaping hole at the backside next to the PCIe slots that is in the original design of the Cooler Master Qube 500 Flatpack. It is actually a bit of a flaw in the otherwise pretty perfect Qube…

Downloads
363
Likes
40
Rating
4
P
PrintablesErki L

Corsair Frame 4000D PCI/PCIE cover

PCI/PCIE slot cover for the Corsair Frame 4000D case. The hole felt a little weird for me - I figured I would try to design a cover for it. I would suggest printing it inside face-down because that way you will manage to hide most of the…

Downloads
348
Likes
32
Rating
5

PCI/PCIe card support bracket

Bracket designed to support heavy PCIe or PCI cards when using them in a bare motherboard on the desktop. Modern cards seem to use a bit thinner metal, the dimensioning of the slots is a balance between too tight fit on older PCI cards…

Downloads
348
Likes
57
Rating
5
P
PrintablesTim Ropp

Storage base for PCIe cards

The original base had to sit on the edge of a shelf so that the bottoms of the PCIe brackets could stick down. I wanted more flexibility, so I added height to the unit. This lets the cards fit without protruding too far. I also stretched…

Downloads
334
Likes
49
Rating
4
P
PrintablesPixel Vengeur

Tileable PCIe display stand/organiser

Store PCI Express cards in a space efficient way. No screws needed! I have, for a few years now, been “The IT guy” for my close circle of friends and family. So, I found myself with a lot of hardware to test, try out and rummage through.…

Downloads
327
Likes
35
Rating
5
P
Printablestherick

Lenovo Tiny PCIe I350-T2 Baffle/PCIe Cover

Baffle/PCIe cover for an I350-T2 dual NIC card for a Lenovo Tiny PC. Made specifically for a Lenovo M720Q, but I think it will fit most of the Tiny series. Prints facing down, no supports needed

Downloads
318
Likes
35
Rating
5
P
Printablesjohanncc

Snapfit NR200 PCIe slot covers

Designed these PCIe slot covers for the NR200 to give the CPU cooler a bit more air, also they snapfit ! Note The covers are dimensioned using ABS which shrinks a bit more than other plastics, so if it's too loose for you, try scaling the…

Downloads
312
Likes
64
Rating
5
P
PrintablesSimone Traversi

Zimaboard dual HDD and pcie m2 adapter

The 3D-printed stand for the ZimaBoard is a versatile and practical accessory designed to enhance storage capabilities. With slots to accommodate two 2.5-inch HDDs, it offers ample space for expanding storage capacity. Additionally, the…

Downloads
304
Likes
26
Rating
0
P
PrintablesPhilip Everts

PCIE Blende

Dieses Modell ist eine PCIE Blende, die man zum abdecken eines ungenutzten PCIE-Slots verwenden kann.

Downloads
294
Likes
46
Rating
5
P
PrintablesJohn U

Raspberry Pi 5 - Geek Pi M.2 NVME drive to PCIe hat case

Bought a Raspberry Pi 5 along with the "active cooler" from Chicago Electronics Distributors and a "GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280" from Amazon. Needed a case, so voilà.…

Downloads
293
Likes
28
Rating
4
P
PrintablesShadowChaser

Lenovo P330 Tiny RX6400 PCIe Bracket

This is a highly perforated PCIe bracket for an HP RX6400 that allows it to be used in a Lenovo P330 Tiny USFF system to replace the original Nvidia Quadro GPU. Theoretically any reference low profile RX6400 will also be compatible with…

Downloads
285
Likes
12
Rating
0
P
PrintablesBeanow

PCIe Rack Mount (10" 1U)

Important notes Modification is required for the “Caddy BASE” model. Provides full-height (standard) PCI slots, not low-profile slots. 1U will fit a 2 slot card. But if you have clearance below, you can mount a 2.5 slot card. I have not…

Downloads
280
Likes
55
Rating
5
P
PrintablesAbandoned

Low Profile PCIE Bracket for Gigabyte GT 1030 (QNAP TS-473A)

This is a model for the Gigabyte GT 1030 (GV-N1030D5-2GL). This is specifically made for the QNAP TS-473A. I used a 0.2mm Nozzle with PETG. I recommend printing this model standing upright and using tree supports for the display output…

Downloads
280
Likes
17
Rating
5
P

Lenovo Tiny CX354A PCIe Bracket

This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…

Downloads
274
Likes
26
Rating
5
P
PrintablesKazdo

Low Profile Vented PCIe Bracket

Low Profile Vented PCIe Bracket – replacement bracket designed for low profile (half-height) PCI Express cards. Features ventilation slots to improve airflow and cooling within the case. Ideal for compact or small form factor (SFF) PC…

Downloads
268
Likes
14
Rating
5
P
Printablesjeepers01

Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base

Raspberry Pi 5 PCIe NVMe Case for Pimoroni NVMe Base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. Four mounting posts are provided to mount the Pi on top and the Hat to the underside. These act as a…

Downloads
264
Likes
27
Rating
0
P
Printablesstevekamerman

80mm PCIe Slot Fan

UPDATED on 2024-11-22 to add PCIe Slot (compatible with PCIe 1x, 4x, 8x and 16x) supports, a reinforced mounting bracket, and slightly larger mounting holes to prevent cracking with non-self-tapping fan screws. This is a 80mm PC fan…

Downloads
258
Likes
33
Rating
5
P
PrintablesThatJordyGuy

PCIe Single Slot Cover - Honeycomb

Here's an easily printable PCIe single slot cover for a PC case. I altered the honeycomb pattern slightly to accommodate the variants I wanted to make, so I provide the basic cover with no cable management stuff as well. Inner Channel: A…

Downloads
253
Likes
13
Rating
0
P
PrintablesDesignBot

10 inch rack for ZimaBlade with PCIe 2.5G ports

This is my customized 10-inch rack mount for the ZimaBlade. I kept the original black metal heatsink module from the ZimaBlade. Since my home network runs at 2.5G, I added a PCIe network card. Because I also added a 2.5” hard drive mount,…

Downloads
251
Likes
25
Rating
4.5
P
Printablesflummer

Mini PCIe extender from half size to full size

This is a small, quick to print adapter, that extends the length of a half size Mini PCIe card, so that it can sit properly in a full size socket. It simple snaps in and is hold in place using small protrusions that fit on the mounting…

Downloads
240
Likes
13
Rating
4.5
P
PrintablesBussey Bank

JayzTwoCents GPU Anti-Sag PCIe Slot Cover

I took the idea for this model from JayzTwoCents video on sagging GPUs.(Link Below) I have gone ahead and created some PCIe slot covers that are extra thick on the back to help prevent your GPU from sagging due to poor design of 30 series…

Downloads
224
Likes
19
Rating
3
P
PrintablesJerrari

PCIe Mining Bracket

PCIe Mining Bracket Is your mining rig keeping you up at night, dreading that those unsupported PCIe adapters are going to wriggle lose destroying your rig and precious hopes and dreams? Rest easy with the PCIe Mining Bracket. This puppy…

Downloads
220
Likes
88
Rating
5
P
PrintablesRaid Owl

PCIe Expansion Rack Mount

This rack mountable solution lets you add more pcie cards to your setup

Downloads
215
Likes
39
Rating
0
P
PrintablesDust

pcie riser lock custom

Needed a fractionally larger PCI-E Riser Lock. Source was not in openscad so I've recreated it in openscad and extended its height by 0.5mm The dimensions are now settable in the variables body_x body_y body_z Print instructions Category:…

Downloads
214
Likes
3
Rating
0
P
Printablesscmanjarrez

Long PCIe bracket Nvidia P620 (mirrored)

Bracked mirrored. Remix from https://www.thingiverse.com/thing:4943241 Category: Electronics

Downloads
205
Likes
13
Rating
5
P
PrintablesDrexplotionpd

PCIE RJ45 keystone cover

I wanted to be able to install my USB over ethernet adapter inside of my computer case. This is due to me preparing to move my pc into a server rack mounted case and I cannot have loose components hanging off the back of the computer.…

Downloads
200
Likes
32
Rating
0
P
PrintablesMartinRowan

Zimaboard Wall Mount with PCIe NIC

I wanted to mount my Zimaboard and an extra 2.5Gbps NIC as I plan to use this as a pfSense router. I've provided 2 versions, one which uses brass inserts to secure the NIC onto, the other which provides smaller holes for M3 bolts to self…

Downloads
189
Likes
18
Rating
5
P
PrintablesTim Kanarsky

2x 120mm fan -> 4x CMP170HX/A100 PCIe intake plenum

Made a nice organic looking air intake to cool four Nvidia CMP 170HX PCIe cards with two high pressure 120mm fans. They move more air than 8x 40mm fans and are hell of a lot quieter. Also compatible with the A100 PCIe and potentially…

Downloads
189
Likes
17
Rating
0
P
PrintablesZer0s

PCIe card cover

Update 12 Oct 2023: I realized that the x4 was actually x1, my apologies for any confusion caused. Renamed x4 to x1, no change in design. Update 5 Oct 2023: Added STL version of the model. Cover to protect PCIe cards during storage. *****…

Downloads
189
Likes
12
Rating
5
P
Printablesunknow1assassin

Snapfit NR200 PCIe Slot Covers (Reinforced)

This is a remixed model based on the Snapfit NR200 PCIe Slot Covers, designed to snap onto the back of the case where the vertical GPU support is located. The updated model is more precise in terms of its size and features reinforcement…

Downloads
184
Likes
24
Rating
5
P
PrintablesValentino Hesse

PCIe card display stand with bracket support

PCI graphics card stand. This is a left and right remix to suit all kinds of graphics cards. Print parameters Nozzle: 0,4 Supports: NO Material: PLA, PETG Don't forget to upload a photo of your print and share. Don't forget to follow my…

Downloads
179
Likes
32
Rating
4.5
P
PrintablesShadowChaser

Dell Broadcom 58710A Full Height PCIe Bracket

The cards I purchased only came with the low profile brackets as standard so I designed these in Fusion 360 as replacements. These print laying flat and both the PCB mounts and the stiffening brace fold back into position after removal…

Downloads
176
Likes
5
Rating
5
P
PrintablesEugène R.

PCI/PCIe Lower Profile support bracket HSW compatible

PCI/PCIe Lower Profile support bracket HSW compatible

Downloads
175
Likes
19
Rating
5
P
Printablesvalpackett

PCIe Card Showcase Stand

Thing for storing / showcasing unused PCI Express cards (legacy PCI cards fit too), strong enough for air cooled GPUs (printed in PLA with 20% infill). Can be used vertically, supported by a GPU in the bottom slot! Print instructions…

Downloads
169
Likes
17
Rating
0
P
Printablesblunaowl

PCIe card backplate

Got a SATA expansion card for my PC, but the metal bracket that came with it didn't actually allow for the card to seat fully in the PCIe slot. Didn't want to measure the hole distance exactly (and inevitably screw it up *fner fner*) so I…

Downloads
169
Likes
27
Rating
5
P
PrintablesIroesStrongarm

PCIe RJ45 Panel Mount Passthrough Bracket

This bracket is designed to be able to use an RJ45 panel mount extender cable to a PC tower. I needed a way to connect a device inside of my case to a network cable. This is the panel mount cable I'm using but it might work with other…

Downloads
169
Likes
17
Rating
0
P
Printablesai_monkey

Intel PCIE slot SSD tray

ASA suggested for stiffness and temperature resistance. May droop a bit but it shouldn‘t be a structural concern. Mine ended up being supported from below by the excess length of SATA and power cables running between the tray and the PSU…

Downloads
164
Likes
33
Rating
5
P
Printableseli_liam

PCIe card cover - x4 x8 x16

Cover to protect PCIe cards during storage. This remix adds a new PCIe x8 cover to the original x4 and x16 sizes.

Downloads
161
Likes
9
Rating
5
P
PrintablesLogoiLab

Parametric Intel XF SR PCIe Bracket

This is a PCIe bracket for Intel XF SR based networking cards. These are similar to the Intel X520 but use XFP/QSFP+ List of compatible devices: Intel XF SR 10Gbe IBM 5772 This may work with other Intel 10Gbe XFP based cards but has only…

Downloads
160
Likes
5
Rating
5
P
PrintablesLab3Dp

Cable Comb PCIe 8PIN 2x4 for braided sleeved cables

This is a cable comb for braided PC cables. I wanted one for my graphics card and couldn't find one that was wide enough. My first design is included as well, but it is to tight for sleeved cables. Though it is perfect for regular ones ;)…

Downloads
158
Likes
23
Rating
5
P

PCIE Fan - 92mm Half-Height Bracket for HBA, NIC, GBU, etc.

You might need slightly longer pcie screws depending on your case.

Downloads
154
Likes
44
Rating
0
P
Printablesgufpewga

Acer Veriton N4640G PCIe addon

Have you also been searching for addon slot for PCIe card for your Acer Veriton N4640G? Look no further, this model is made to acuminate any single slot, low profile PCIe card. If you are looking into adding some networking card or even…

Downloads
152
Likes
4
Rating
0
P
Printablesfhessel

Gridfinity PCIe Card Stand

This model is an extension to Zack Freedman's Gridfinity system . It holds two PCIe cards in upright position. By placing more of them besides each other, you can create a larger array. The 2u-variant is recommended for cards with a 1x…

Downloads
147
Likes
21
Rating
5
P
PrintablesPhil Asdf

Sabrent M.2 PCIe USB Enclosure - Case with lid

A protective case for the sabrent m.2 ssd case with a compartment to hold the cable. Needs 2 6*3mm magnets for the lid. If you have any further questions or need a special file format to adjust the case to your likings feel free to dm me!…

Downloads
142
Likes
25
Rating
5
P
PrintablesFletcher

4U Server Case GPU PCIe Riser Mount Conversion V006 to V009S

Overview This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this setup as a neural network trainer, render farm,…

Downloads
138
Likes
28
Rating
0
P
Printablesbusysignal

ZIMABoard with SATA and PCIe Cards

This is a crude modification of two Printables.com projects: - ZimaBoard Wall Mount w/SSD: https://www.printables.com/model/178994-zimaboard-wall-mount-wssd And - ZimaBoard Wall Mount for Generic PCIe cards:…

Downloads
135
Likes
15
Rating
5
P
Printablescla7997

Single-slot GPU Display Stand Pcie Holder

Very low filament of the GPU display stand made by IVIarc_Antoine . I also made a more stable double slot stand. I used it to re-organize my gpu drawer. Check it out >here< if you want It's a bit scuffed, but it does what it needs to.…

Downloads
135
Likes
10
Rating
5
P
PrintablesBridget

Lian Li o11 Dynamic PCIE slot covers

So yeah, troubleshooting random crashes, short version, removed all the vertical graphics card hardware (didn't solve the problem) and wanted something to fill the empty slots that wasn't using all the screws and kept dust out a bit…

Downloads
132
Likes
25
Rating
0
P
Printablesilektron

MiniITX PC Case V2 with 140mm Case Fan and Low Profile PCIe Card

Here's yet another 3d printed PC case for a MiniITX build that accommodates a low profile PCIe card. It requires the use of a Pico PSU and does not have any locations for mounting a any SATA drives. WARNING: This currently only supports a…

Downloads
129
Likes
43
Rating
5
P
Printableskompetenzbolzen

LSI 9212-4i4e Low Profile PCIe Bracket

Low profile bracket for LSI 9212-4i4e SAS HBA adapted from https://www.printables.com/model/244218-pci-low-profile-brac

Downloads
119
Likes
4
Rating
0
P
Printablescla7997

Single slot Dual GPU Display Stand Pcie Holder

Very low filament, double GPU version of the GPU display stand made by IVIarc_Antoine . I already made a single gpu version but it was waaaayyy too unstable so I made a double gpu version for stability. >Here it is< if you really need it,…

Downloads
119
Likes
17
Rating
5
P
PrintablesThatJordyGuy

PCIe Single Slot Cover - Selflock Mosaic

A simple PCIe slot cover that can be printed without supports. The airflow holes are modelled after the Selflock Mosaic pattern.

Downloads
116
Likes
11
Rating
0
P
Printablesbonesure

Radeon Instinct MI8 DisplayPort PCIe bracket

Hi everyone. It's my first upload here so any suggestions for improvements are welcome. There was this special deal for a Professional-grade Radeon Instinct MI8 (basically a R9 Nano without a fan and with only 1 monitor-out: DisplayPort)…

Downloads
113
Likes
7
Rating
0
P
PrintablesDorffMeister

QNAP TS-563 PCI Bracket for AMD R7 250 Video Card PCIe

I've included 3mf and stl. I've included a Fusion 360 export, should you need to edit the model. A year or so ago, I was having problems with my QNAP TS-563. I needed to get things back up and running so when my troubleshooting was…

Downloads
112
Likes
6
Rating
5
P
Printableslinlunson

Raspberry Pi 5 Case (snap fit) with Waveshare PCIe To M.2 NVME Adapter

tweak the shape to fit the waveshare pcie to m.2 nvme adapter.

Downloads
111
Likes
13
Rating
0
P
Printableshgross

PCIE Bracket - Cable feed through

Remix of pankomputerek's blank PCIE-bracket . Useful to feed a cable in or out of the back of a pc case.

Downloads
109
Likes
14
Rating
0
P
PrintablesRolf Bakker

PiKVM R4C3R PCIe bracket mount for RPi Zero W

This is a PCIe bracket on which a PiKVM setup can be fixed based on a Raspberry Pi Zero W + Lusya HC100 Ver:A01 HDMI to CSI bridge + 3cmx7cm pcb with ATX power on/off + reset. Check out the awesome PiKVM project at https://pikvm.org/…

Downloads
109
Likes
17
Rating
5
P
Printablesatomphil

low profile bracket for LT301 PCIe adapter card

It is a low profile bracket for an LT301 SATA and USB3.0 PCIe card.

Downloads
108
Likes
12
Rating
0
P
PrintablesAmyRayn

PCIe Sorting Holder x12

An PCIe sorting holder for up to 12 devices like graphic-cards

Downloads
106
Likes
31
Rating
0
P
PrintablesRagingRoosevelt

PCIe Riser Mounting for Ephyxis' Compact ATX Case

Original Case (thingiverse) Front Panel Variants I modified Ephyxis' PSU topper to have room to let the thick cables of my Cooler Master PCIe 4.0 Riser Cable (MCA-U000C-KPCI40-300) fit past the CPU cooler on my heatsink. The modifications…

Downloads
106
Likes
14
Rating
0
P
Printablesjeepers01

Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base

Raspberry Pi 5 PCIe Sleeve Style Case for Pimoroni NVMe base The case has been designed to house the Pimoroni NVMe Base mounted under the Pi. The case comprises the sleeve case top and bottom sections, sd end and usb end panels, 4x…

Downloads
104
Likes
14
Rating
2
P
PrintablesRamjetX

RamjetX PCIE GPU Wall Mount

Hi internet DIY'ers. Look this is just something super quick in like 30mins of design and buggering around with trying to figure out how I can mount my old GPU's to a wall for display purposes. It 'should' fit most GPU's... I think the…

Downloads
103
Likes
18
Rating
5
P
PrintablesiListen2Sound

PCIE Bracket with Screw-in HDMI slot for Sensor Panel

Needed a place for my HDMI to my sensor panel to go through without creating a giant hole on the back of my PC. Remembered a PiKVM mount I never got to print and then added the dimensions to the cable I was using.…

Downloads
101
Likes
8
Rating
0
P
Printablesmatmen

Dell PERC H310 HBA PCIe bracket (full length)

This is a simple full-length PCIe bracket for the Dell PowerEdge H310 HBA / RAID controller. I mounted the card to the bracket with two short M3 bolts and nuts, but you can also use an M4 bolt and screw directly into the plastic. With…

Downloads
101
Likes
4
Rating
0
P
PrintablesITG Gear

DIY Micro PCIe SlimSAS 8654 eGPU testbench

Overview This is a custom, compact 3D-printable testbench designed specifically for the Micro PCIe SlimSAS 8654 eGPU setup. It provides a secure, organized, and open-air frame to mount your external graphics card, SlimSAS adapter board,…

Downloads
100
Likes
6
Rating
0
P
PrintablesmC_rOMeo

Case for Raspberry Pi5 + X1201 UPS Board + X1001 PCIe NVMe board

I needed a case for my pi5 with the original active cooler and the two Geekworm boards x1201 and x1001. I use the pi5 for my home automation. When I bought the pi5 and the boards there was no matching case and so I designed this one. I…

Downloads
100
Likes
3
Rating
0
P
Printablesholocron

pcie cover

pc pcie case cover. It is thick so you can remix to be thinner but than is not sturdy. it is 2mm thick remember that !

Downloads
98
Likes
8
Rating
5
P
PrintablesHydrohs

Expansion Card Protectors (ISA/PCI/AGP/PCIe)

Very simple and quick prints to protect the connectors on various expansion cards. You may need to adjust scale very slightly if they print too loose or too tight. I don't have any spare PCIe x8 cards to measure with, but scaling another…

Downloads
97
Likes
8
Rating
0
P
PrintablesBalloonActivity

NZXT H510 Flow PCIe Slot Cover With Patterned Variations

I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead. The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers…

Downloads
95
Likes
5
Rating
5
P
Printablesdebauer

Gridfinity PC Card Organizer (AGP, PCI, PCIe) - now also PCIe 1x

On some cards, it's a bit of a tight fit, but I can always get them in, and there's no wiggle. On the pictures is my first version. I decreased in v1/v2 the height of the slot to get no trouble with resistors on the card. If you have any…

Downloads
93
Likes
11
Rating
5
P
PrintablesSlegnor

LINKUP Ultra PCIE 4.0 Gen4 Riser Cable Mounting Base Plate Support (for Corsair iCUE 4000X/4000D/5000D & maybe other cases)

If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…

Downloads
92
Likes
11
Rating
0
P

LSI SAS 9300-8e Full Height PCIe Bracket

This is a PCIe Bracket for mounting an LSI SAS 9300-8e in a Full Height PCIe slot. I found it worked really well printing it with the little notch required for the SAS connector facing up an using supports under the bracket and inside of…

Downloads
90
Likes
5
Rating
0
P
PrintablesDuckle

Bracket PCIe PiKVM reinforced

The original bracket was too thin for my use. Even before adding the PoE hat, while it worked, it was sagging too much for my taste. As I also wanted a PoE hat, I wanted it to be more solid. This is modified in fusion360 off the mesh…

Downloads
88
Likes
9
Rating
4
P
PrintablesGodsbane

Low Profile PCIE Bracket With customizable holes

The included scad file has parameters for the position, size, and number of holes to be cut into the panel.

Downloads
85
Likes
4
Rating
0
P
Printableslinlunson

PCIE slot USB 1C2A

Print each part and glue together to get the rigid slot.

Downloads
85
Likes
16
Rating
0
P
Printablesjeepers01

Raspberry Pi5 PCIE NVMe Case for 52Pi NVDAC HAT

Raspberry Pi5 PCIE NVMe Case for 52Pi NVDAC HAT The case has been designed to house the 52Pi PCIe NVDAC HAT audio expansion board mounted over the Pi 5 Active Cooler above the Pi 5. The 52Pi hardware kit includes 4x M2.5 x 17 Brass…

Downloads
85
Likes
2
Rating
5
P
PrintablesDavid Fish

Mellanox ConnectX-2 CX312A Full Length PCIe Bracket Shield

Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.

Downloads
84
Likes
5
Rating
5
P
PrintablesBalesz

PCIe x16 display stand with double bracket support

Update 260906: Since the holder was printed from PLA and my card is heavy, the holder started deforming. One day I'll update the part with a cutomizable stand to support heavier cards on 3 points, for now I'd recommend printing it with…

Downloads
83
Likes
16
Rating
5
P
PrintablesAidan Crowther

Xeon Phi PCIe Bracket

I am porting my original designs from Thingiverse, below is the original description (https://www.thingiverse.com/thing:5091409) I purchased a Xeon Phi on eBay that didn't have a PCIe backplate. As such I wasn't able to mount it within my…

Downloads
83
Likes
2
Rating
0
P
Printablesmaxelman

QNAP LAN-10G2SF-MLX Full Height PCIe Bracket

Replacement full height / long PCIe bracket mount for QNAP Dual Port 10GbE SFP NEC

Downloads
83
Likes
11
Rating
0
P
PrintablesAaronOaks

Gridfinity PCIe Card Holder

PCIe card holder colder, compatible with the popular Gridfinity organization system. Fits 2 1-slot cards in a 1x3 grid space. Based on a 1x3x1 (x,y,z) generated Gridfinity base platform from https://gridfinity.bouwens.co/

Downloads
82
Likes
7
Rating
5
P
PrintablesBread!

IBM H1110 PCIe Bracket (Low Profile)

I got one of these storage controllers for cheap, but it didn't come with a low profile mounting bracket! This design uses two M3 screws, but clearance may need to be adjusted for different printers/filaments.

Downloads
82
Likes
4
Rating
0
P
Printablessgsunder

PCIe 6+2 Power Cable Cap

For peace of mind, I created a cap to cover the ends of unused 6+2 PCIe power plugs.

Downloads
82
Likes
11
Rating
5
P
PrintablesDrHellbenders

ZimaBoard Modular Rack Sled Remix - PCIe, Tool-free SSD, & other minor tweaks

I have not been particularly happy with the Zimaboard mounting options out there until finding @MartinRowan's excellent modular 1U system . This remix was done to suit my specific needs, but I feel that some may be of use & worth sharing.…

Downloads
82
Likes
7
Rating
0
P
PrintablesRockDar

PCIe card holder

PCIe card holder, versions for 2, 4, 6 and 8 cards. Works very nice even with 0.3mm layer heightWorks very nice even with 0.3mm layer height

Downloads
80
Likes
4
Rating
0
P
Printablesoosharkyoo

Super Micro Intel Dual Port 10GB Nic PCIE Slot

Mine came with only a half height slot so I made a full height PCIE slot holder for them. Exact model is from super micro - Intel 82599 10 GB Dual Port Network Card

Downloads
79
Likes
3
Rating
0
P
PrintablesJulius3E8

PCIe card display stand

Ever have a pile of old PCIe x2 x4 x8 x16 cards lying around? They're either scattered on the floor, crammed into a drawer or hidden in the refrigerator with next to the frozen blueberries (yes, I live in a very interesting household).…

Downloads
77
Likes
14
Rating
0
P
PrintablesTejasV

PCIe Fan Duct

A 3D printed duct that attaches a standard 120mm PC case fan to 4 PCIe slots to improve GPU cooling. There is a 4-slot version which is pictured and a 3-slot version. Also included is an optional shroud that encloses the fan for a cleaner…

Downloads
72
Likes
9
Rating
5
P
Printablesp_fabi

Dual ethernet low profile PCIe bracket

Print standing on “feet”. Tree supports are good - auto ones should work. Needed mine for HP T730 thin client.

Downloads
71
Likes
4
Rating
5