Search results: phat

Sort order

Counting matching models…

P
PrintablesCesare

Inky pHAT case (with RaspberryPi Zero)

Just a little case for the Pimoroni Inky pHAT (with RaspberryPi Zero). The case can be clicked together without any screws. The camera port, the SD Card and the two USB Ports are accessible, however, the HDMI Port is inaccessible. Print…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
25
Rating
5
P
PrintablesJérémy Reeder

Phat Whistle

I intended to tie this to my lifejacket for paddleboardin' and kayakin'. I adapted the design to work well with a fat nozzle because that's what I've got. As a bonus, the double-thickness walls increase crush-resistance. My adaptations in…

Print approx. €0.59–€0.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
82
Likes
15
Rating
5
P
PrintablesDavid Ondřej

DUMMY 13 tophat

just a simple dummy 13 tophat 0,1 layer height best with tree supports

Downloads
2,504
Likes
507
Rating
5
P
Printables93djen

Voron V0.1 Tophat Spacer with Hinges

Voron V0.1 Tophat Spacer with Hinges Makes the tophat higher, stiffer and adds a hinge. Therefore its a lot easier to open the top and adds 20mm more space in the top for cable routing and higher Extruders. I added now also a Version…

Downloads
1,298
Likes
136
Rating
4.94
P
PrintablesLuc1luc

Voron 2.4 & Trident Tophat 66mm

Previously to everything else, if you would need an adpated Version, like different Panel Size etc., just DM me and i might adapt and add it. (TBD) Modded back pieces for Umbilical Passthrough (06.09.2024) Screwable Retainer Lid for the…

Downloads
831
Likes
152
Rating
5
P
PrintablesPvtPrivate

Printed MakerBeamXL 1515 Extrusions for Voron 0.2 Tophat

Printed MakerBeamXL 1515 extrusion and Clips to join them together. "Why not use TinnT's or ryandam's solutions? They seem much sturdier and easier to print than this" Because I plan to use future 0.2 tophat mods, such as chirpy's Tophat…

Downloads
588
Likes
112
Rating
5
P
Printablesnagelwerkstatt

Voron 2.4 tophat with integrated touchscreen

update 2026/10/05: a version for the BTT HDMI5 can be found here update 2023/07/09: moved the mounting tabs a bit outwards to make the “sturdy handles” fit between them (surely not on the 250 xD) added versions for the 250/350 (not…

Downloads
580
Likes
163
Rating
5
P
PrintablesLuc1luc

Voron 2.4 & Trident Tophat 35mm

(16.02.2024) Outsourcing the 66mm Version to it's Original repository (01.02.2024) Added CAD Files and made the 66mm Version to be screwed down (35mm TBD) → There were to much reports of the TopHat not sitting tight enough against the…

Downloads
567
Likes
196
Rating
4.82
P
PrintablesSiggie Pop

Voron 0.2 tophat spacer incl. panel extension

I implemented the excellent mod by Miningitix, but didn't want to buy new panels. So I made a mod which incorporates a panel extender and the regular printed parts. Print from PETG or ABS/ASA since it can get quite warm.

Downloads
521
Likes
105
Rating
5
P
PrintablesThe3dprinter

Snake with tophat

Print Settings Printer: Prusa mini+ Rafts: No Supports: Only the combined model requires supports, for the just the bottom part of the hat. Resolution: 0,2 Infill: 20

Downloads
515
Likes
111
Rating
5
P
Printablespiranhaphish

Drive Tray Cover for XBOX 360 (Phat)

This is made in two parts for printability and aesthetics. The two parts can be assembled with small screws (~M1.8×3mm, ~3.5mm head diameter) or glued. Print the bracket with the largest face down (holes facing downward). Print the face…

Downloads
508
Likes
56
Rating
5
P
Printablessensitivewoo

Phat Bic Lighter Sleeve

.4 nozzle .2 layer height 6 layers top and bottom and 6 walls inside and out 30% infill, cubic, there is not much infill no supports I used super strong hairspray for good bed adherence.

Downloads
491
Likes
99
Rating
5
P
PrintablesGlennovitS 3D

Finger Puppet Pack (tophat, tie, sunglasses and more!)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
489
Likes
162
Rating
5
P
Printablesparker print

Centauri Carbon 1 Canvas minimal tophat

Lowers canvas and routes with a side bracket. The core hat is broken into 4 pieces with puzzle joiners. For my installation, I glued all pieces together and glued panels in place. Panel sizes are 6"x13" x <3mm. Much more quiet :) Edit…

Downloads
476
Likes
108
Rating
4.13
P
PrintablesMeningitix

Voron 0.2 Tophat extender

The umbilical always rubbed on my tophat. When I Upgraded to 0.2, Pandora and AfterSherpa, this rubbing caused the sensorless homing to fail. Extrusions are pretty hard to get, where I live. These extenders raise the tophat by 30mm, so…

Downloads
387
Likes
117
Rating
4.8
P
PrintablesPlasticMelters

xbox360 phat custom console shell

xbox 360 custom shell with internal removable 3.5" hdd hardware required heatserts m3 x 4mm wide 3-5mm long 4x m3 x 16mm screws 2x m3 x 75mm screws 4x m3 x 40mm screws 4x m3 x 10mm screws 6x #6-32 UNC screws (hdd mounting) 4x m3 20mm…

Downloads
299
Likes
19
Rating
0
P
PrintablesError.404x_

Voron v0.1 Tophat on v0.2

Hey everyone! So there was I really excited that I had finally bought my Voron v0.1 kit… when I saw that the v0.2 was released 3 days later. Luckily I had not printed anything and the v0.2 changes are mostly to the printed parts. One of…

Downloads
294
Likes
55
Rating
5
P
PrintablesAjfel

Xbox 360 Phat HDD custom frame

HDD frame for Xbox 360 Phat. I desoldered the original connector for the HDD connection from the xbox. Instead there is a classic SATA connector for connecting the disk.

Downloads
281
Likes
45
Rating
5
P
PrintablesManMan
Downloads
275
Likes
4
Rating
0
P
Printablesedgett

Snapmaker J1/J1s Tophat

The factory filament routing on the Snapmaker J1/J1s IDEX 3D printer requires a sharp bend at the top of the print head. The filament guides frequently rub against the top of the printer. This tophat adds an additional 80mm of height to…

Downloads
268
Likes
20
Rating
0
P
PrintablesNadir @ CN3D

SV08 MAX TopHat For stock enclosure

This is a modular, hollow-design top hat for the Sovol SV08 MAX that has the original Enclosure , built to integrate seamlessly with the original factory enclosure . Unlike the stock front panel that relies on gravity alone, this design…

Downloads
246
Likes
41
Rating
5
P
PrintablesPlasticMelters

xbox360 phat custom console shell with dvd

xbox 360 phat custom console shell case with dvd rom and external 2.5" drive up to 8tb bom 6x m3 70mm screws 2x m3 10mm screws 9x m3 6mm screws 2x m3 16mm screws 15x m3 4mm-W 5mm-L heatserts/knurl nuts light 6mm spring (go between button…

Downloads
244
Likes
18
Rating
0
P
PrintablesAl Mon

Nuka Cola Phat

This is a Phat version of Nuka Cola. It is somewhat game accurate but It is fatter at the neck than normal and has thicker fins. 2 versions are included - Simple print which means no supports are needed and the second where there are…

Downloads
231
Likes
54
Rating
0
P
PrintablesUloPe

Voron 0.2 tophat corner camera mount

A mount to fix a 38x38 mm PCB camera into one of the corners of a Voron 0.2 tophat. The camera I used is an ELP 4K IMX317 170° Assembly I used 4 M2 self tapping screws to fix the camera to the mount and 2 M3x20 SHCS to attach the mount to…

Downloads
225
Likes
44
Rating
4.8
P
PrintablesScrease

Voron V0.2 - Tophat 1515 sealing block

During my attempts to increase the chamber temperature , i noticed that there were small gaps all over the tophat, allowing warm air to escape. To reduce this I have designed a small block onto which 8mm wide self-adhesive foam strips can…

Downloads
219
Likes
58
Rating
5
P
PrintablesDUSTO221

Voron Trident/2.4 Canopy tophat Box turtle mounts

I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use this tophat design: Printables link for tophat:…

Downloads
211
Likes
54
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 MAX Tophat – 7" BTT HDMI v1.2 Display Add-On

Sovol SV08 MAX Tophat – 7" BTT HDMI V1.2 Display Add-On This is a remix of the Sovol SV08 MAX Tophat that allows you to install the BTT 7" HDMI Display in the top-right corner of the enclosure. SV08 MAX Modular Top Hat If you already have…

Downloads
207
Likes
48
Rating
5
P
PrintablesGets3DPrinting

Skull Tophat

Tophat skull

Downloads
204
Likes
37
Rating
0
P
PrintablesAqua

SSUPD Meshelicious Tophat for 140mm fan

This tophat is designed to place a 140x25mm fan on top of the case to help with the extraction of hot air. There are two prepared variants, one to print the thing in one piece (Meshelicious_Tophat_v2) and there is one that is printed in…

Downloads
195
Likes
17
Rating
0
P
PrintablesMMiguel

Sony PSP 1000 (Phat) 2004

This is an old PSP 1000 (Phat) sketchup model I made back in 2007. Removed some problematic minor surfaces and scaled it to ¼. Hope it prints nicely as a keyring.

Downloads
193
Likes
6
Rating
0
P
PrintablesJames Bufkin

Snapmaker J1 or J1S tophat printable remix with Chamber Heater

Printable side panels and corners. Use M4x12 screws with inserts. The holes on the corners are good enough that you don't need inserts. You can use nuts and M4 bolts to attach the panels together. You need 6 short panels,2 long panels, 4…

Downloads
189
Likes
20
Rating
5
P
PrintablesEnDva3D

Voron V0 hinged unibody tophat

A unibody mod for the TophatHingeV0.1 mod from MSiemons. You need a build volume of at least 251x238x96mm!

Downloads
180
Likes
35
Rating
5
P
PrintablesLIUZUN

32700 lithium iron phosphate battery 4S bracket

Four 32700 size lithium iron phosphate battery holder is used as a portable power supply

Downloads
175
Likes
12
Rating
0
P
PrintablesSebazzz

Voron V0 tophat cam lock key

After usage, just push the key into the hex skirt of your printer. To use it, simply pull it out. I designed this for Bambu Lab X1C tolerances, but it prints fine on the Voron V0.2r1 as well. Print in either ABS or PLA, both works fine.

Downloads
175
Likes
23
Rating
5
P
PrintablesPrimeRetroGamer

Xbox 360 Phat HDD Replacement Shell

Xbox 360 Phat HDD custom frame to use original HDD adapter parts. The switch is now fastened with a single M2 screw (10mm should be fine), and the HDD can also be securely mounted with screws.

Downloads
165
Likes
34
Rating
5
P
PrintablesK2_Kevin

Prusa Mini + Spool Holder - TopHat

A compact and solid way to print bigtime on your Mini. Jazz up your Prusa Mini+ and manage your filament with the TOP HAT Spool Holder! Easy to install and remove with no screws required. If you are worried about the weight on your little…

Downloads
163
Likes
33
Rating
5
P
PrintablesIsBit

Voron V0.2 Nema17 panel clips, hinges and tophat modded parts.

I was sick and tired of the massive VFAs of the original LDO nema14 motors so I did the “Voron V0.2 Nema 17 mount” mod, but now the tophat and backplate did not fit anymore. So….. I modeled all neccesary parts to not only make the tophat…

Downloads
156
Likes
37
Rating
0
P
Printablesreemo3dp

Chirpy's V0.2 Lift-Off Tophat Hinges with Backstop

Chirpy kindly provided the STEP files for the hinge so I can make this quick adjustment. After replacing the original tophinges, the tophat will only open 125°, but can still be removed. It also prevents the tophat from falling off when…

Downloads
153
Likes
36
Rating
5
P
PrintablesOzan Kurtcebe

Holder for hanna phosphate checker

Holder for hanna phosphate checker

Downloads
152
Likes
10
Rating
0
P
PrintablesAndroxilogin

XBox 360 (Phat) Faceplate USB Cover Repair Clip

A common problem with 360 faceplates, the USB hinge breaks off leaving you with a spring and a piece of metal. Unfortunately I have yet to come up with a plan to fix the memory card slots that no one ever used but this is a start. After…

Downloads
149
Likes
24
Rating
0
P
PrintablesFish.co

Flexi snake with tophat

A flexi snake toy with a top hat

Downloads
148
Likes
20
Rating
0
P
Printablesnw

Voron 0.2 Tophat Webcam (HBVCAM-3M2111) Holder

The bracket is angled so that it points centrally to the print bed (when placed at the top). Mount it to the top right of the tophat and adjust the position before fastening it. You need the following parts: 4* RX-M3x57 threaded inserts…

Downloads
145
Likes
24
Rating
0
P
PrintablesDiplomator

Voron V0 (V0.1/V0.2)Tophat Spacer with Hinges

Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. make a Remix of the TopHat spacer with some changes the hight was…

Downloads
141
Likes
23
Rating
5
P
PrintablesMeningitix

Voron 0.2 Unified Tophat Clips

Didn't like the gaps between the regular clips. Since I also wanted to add (1mm) foam tape, I made them a bit thicker for inceased rigidity and came up with these. Should be used with 3mm panels. You probably want to mirror the rear clips…

Downloads
134
Likes
35
Rating
4
P
PrintablesZingo Andersen

Sovol SV08 Max 150mm ZZ Tophat System

A Sovol SV08 Max 150mm Tophat system with various addon/replacment parts. It has glass guides so you can easily partly or fully open the top glass. The filement hole is a replacable part and you can print the part that you need, include…

Downloads
128
Likes
15
Rating
0
P
PrintablesCustomCreations

Voron V0.1 (Printable ON V0.1!) Hinged Tophat

I wanted to be able to use my V0.1 to print its own parts since it was the only enclosed printer I have so I remixed the hinged tophat from MSiemons original design. This uses all of the same parts to connect the pieces as a regular…

Downloads
121
Likes
26
Rating
0
P
Printableschal

Voron 0.2 tophat panel extension REMIX

This is a remix of the panel extension posted here: https://www.printables.com/de/model/526265-voron-02-tophat-spacer-in I changed it a bit. This extension has a little lip over the acrylic panels.

Downloads
118
Likes
22
Rating
5
P
Printablesalexsporn

alphatronics TV Remote Holder

I wanted a holder for the alphatronics TV remote to use in my caravan. This model has a nice tight pressure fit that holds the remote even while driving. I printed mine on the MK4 standing up using Prusament ASA and the default 0.2mm…

Downloads
118
Likes
16
Rating
0
P
PrintablesStavji

Tophat panel lock Voron 2.4 & Trident

Description Panel lock for Tophat by @Luc1luc_279134 https://www.printables.com/model/567013-voron-24-trident-tophat-66mm/files https://www.printables.com/model/571759-voron-24-trident-tophat-35mm BOM: Printed Parts: 4x Lock 4x…

Downloads
117
Likes
49
Rating
5
P
PrintablesLouisVarley

Phat Einsy case (Even Bigger Big Einsy Case)

Is the Big Einsy Case still not Big enough? struggling to fit some additional goodies in there! Introducing the Phat Einsy Case! This is as big as it can possibly go! You phsyically cannot print a bigger case using the prusa I3. There is…

Downloads
110
Likes
17
Rating
0
P
Printablesteoxoc Hmm

low poly tophat

just a low poly top hat

Downloads
106
Likes
2
Rating
5
P
PrintablesHrumque

Stealthburner printhead block for Phateus Dragon, modded for Voron Tap

This is small mod of file stealthburner_printhead_dragon_rear_cw2 from orginal Stealthburner head, for fit with Voron Tap module. where four screws, mounting vertical MGN9 carriage, interfere with printhead rear housing. The one and only…

Downloads
106
Likes
12
Rating
0
P
PrintablesJCVB

Case for Pi Zero + pHAT DAC / Hifiberry DAC+ Zero

A Case for Pi Zero + pHAT DAC or Hifiberry DAC+ Zero.

Downloads
105
Likes
6
Rating
0
P
PrintablesHokkyokuguma

AlphaTools Calipers Battery Cover for 20497503

Printed with 0,1 high PLA Face down + Support for the grooves messschieber schieblehre schublehre schiebelehre

Downloads
102
Likes
8
Rating
0
P
PrintablesRick

Hanna Phosphate test kit holders for salt water aquarium

test kit holders for salt water aquarium for Hanna ULR phosphate

Downloads
98
Likes
14
Rating
0
P
PrintablesMatszwe02

Tophat support strut for Voron V0.2 (0 V0 0.2)

Tophat support strut for Voron V0.2 Rises tophat by 5.5cm allowing air to flow Retractable, clickable into place Parts required: 2x M3x12 BHSC bolt 1x M3 nut Printing: Support required for arm at the hinge Mounting: hinge bolt to the…

Downloads
98
Likes
34
Rating
5
P
PrintablesGranPorculio

Separator Stand for the Xbox 360 Phat - Soporte separador para Xbox 360 Original

Eng: -Sorry for my English. :'D I made these separators for my Xbox 360, so that it can get air from below without any difficulty, since before I left it on the table as seen in the images but without the supports obviously, and it…

Downloads
98
Likes
19
Rating
5
P
PrintablesDrommon

voron 2.4 350 stealth tophat

a tophat to match PrintStructors stealth cheesegrater skirts mod a bit better.

Downloads
97
Likes
27
Rating
0
P
PrintablesBaGooN

Voron 0.2 Tophat Extender 15mm

I tried other "K Extrusion" extender, but I stressful due to the wobbly of the "K Extrusion." So, I design my own solution. This 15mm extender part is integrated with 'th_top_clip_x4.stl' and can be securely fastened with screws using…

Downloads
97
Likes
29
Rating
5
P
Printablesmarc

1:1 Replacement Shell--Nintendo Original Ds Phat

The original ds is infamous for its shell being prone to easily breaking, especially at the hinge area. Rather than buy an aftermarket version (which are just as weak or weaker than the original shells) you can 3d print yourself a new…

Downloads
96
Likes
11
Rating
0
P
PrintablesComrad ruski

Tophat

A medium sized monopoly hat (player symbol) intended for elderly people.

Downloads
94
Likes
1
Rating
5
P
PrintablesHitLuca

Voron 0.2 filtered tophat exhaust

This project aims at improving the usability of the Voron 0.2 printer when enclosed, by having a plug-and-play exhaust system similar to what you would find on a Voron 2.4 or Trident. An exhaust system works in tandem with an internal…

Downloads
94
Likes
39
Rating
4.75
P
Printablesatom

Fixed OctoOrb Tophat

The mesh of the original model causes PrusaSlicer to generate a bunch of very short jagged movements on some layers of the print (see gcode preview screenshots), causing the very distinct bands you see in the photo. The mesh generated…

Downloads
93
Likes
19
Rating
0
P
Printables3DHippo

Skeleton with Tophat

I got the opportunity to work with a 3D scanner and I scanned some skeleton I had lying around, because I thought it needed a nice hat. If you love this design and want to see more fun projects like it, consider joining my club on…

Downloads
93
Likes
36
Rating
0
P
PrintablesSquidMan

Split Voron V0.2 tophat spacer and extender

Split version of Siggie Pops tophat extension panels to be printable on the Voron V0 itself. I would recommend printing the item in ABS/ASA as the print chamber gets quite warm and anything less might warp/soften over time. Middle…

Downloads
90
Likes
19
Rating
5
P
PrintablesDoBa

Voron V0.2 Tophat Handle

Handle for Voron V0.2, a bit different design and fits on V0 bed with shorter Y axis travel distance. See drawing for BOM.

Downloads
88
Likes
19
Rating
0
P
PrintablesJulian Schrader

Voron 0.2 Logitech C270 tophat mount

A super compact way to mount a Logitech C270 cam to the 1515 extrusion of the Voron 0.2 tophat with the tophat-extension

Downloads
87
Likes
8
Rating
4.5
P
PrintablestbkMAKER

Skeletor MK7 Topless Strain Relief & Tophat

Skeletor MK7 Topless is now officially released. This release includes the Skeletor MK7 Topless strain relief and tophat, designed for users running Skeletor without the standard top cover. These parts provide clean cable management and…

Downloads
86
Likes
15
Rating
0
P
PrintablesDROUGA

NR200 AIO Tophat

This is a remix of naturalnetworks 'Cooler Master NR200 Case Top Hat Spacer' I would have added the remix in the proper way but Thingiverse is broken again... This tophat is designed with EK 240 D-RGB AIO in mind, with a rad thickness of…

Downloads
86
Likes
10
Rating
0
P
PrintablesFirekingen

Teddy Bear Tophat

Tophat for stuffed animals. Make sure to scale this model so that it fits your stuffed animal. You must sew the tophat on the stuffed animal or attach it another way.

Downloads
83
Likes
8
Rating
0
P
PrintablesDatafreak

Remix of Voron V0.1 Tophat Spacer with Hinges

https://www.prusaprinters.org/prints/109713-voron-v01-tophat-spacer-with-hinges

Downloads
81
Likes
7
Rating
0
P
PrintablesZingo Andersen

Sovol SV08 Max 150mm ZZ Tophat - BTT 7 inch HDMI 1.2

This is an addon to the Sovol SV08 Max 150mm ZZ Tophat The addon is a replacement corner that adds the holder for the BTT 7 Inch ver 1.2 screen. This model uses 8x4mm inserts for the fans all other holes do not and are just printed…

Downloads
81
Likes
8
Rating
0
P
Printablesnw

Voron 0.2 Tophat LED Stripe Holder

The bracket is angled so that it points centrally to the print bed (when placed at the top). You need to print two of them, to mount 20 cm of LED stripe to the printer. The mounts are designed to be mounted in the upper front corner of…

Downloads
81
Likes
12
Rating
0
P
PrintablesMari

Voron v0.1 hinged tophat (using v0.2 hinges and camlock)

Models print in the same orientations as the original parts, make sure to tune your printer to get the tolerances for the printed thread of the camlock screws right. In addition to the original v0.1 hardware you will need: 2x m3 washer 2x…

Downloads
79
Likes
12
Rating
5
P
PrintablesJxden6

Xbox 360 Phat HDD Chrome Delete

I wanted to delete the chrome piece of my Xbox 360 HDD so I designed a replacement piece. Best printed with the top on the print bed, supports enabled, and potentially a brim if your first layer is not perfect.

Downloads
79
Likes
10
Rating
0
P
PrintablesBatalhoti

Voron 0.2 Tophat extender exagons

Tophat extension based on the Meningitix and Siggie model The size has been changed to 35mm, a support for the original acrylic has been added and some exaggerations have been made so that it doesn't look flat

Downloads
77
Likes
25
Rating
5
P
PrintablesMarek

Voron 0.2 tophat extender addon panels

To be able to fully use Voron 0.2 Tophat extender by Meningitix https://www.printables.com/pl/model/421883-voron-02-tophat-extender I designed and printed simple 212x30x3mm panel extensions. Also needed additional 8 pieces Voron0.2 panel…

Downloads
71
Likes
24
Rating
5
P
Printablesdavisornaw

Devkit Side Car Clips / Replacement Bottom for Xbox 360 Phat

Designed by the one and only https://sharkyscustoms.com/ - @Davisornaw If you don't have a printer, i do sell fully printed models here: https://sharkyscustoms.com/collections/3d-prints Part #: X801597-002 What is this? These are used to…

Downloads
70
Likes
8
Rating
0
P
PrintablesYa Ikou!

Voron V0.1 Hinged Tophat Spacer w/ Cable Routing

Update 23 Jan 23 - Shall we call this the official exit from beta?! Huzzah! While there may yet be additional improvements, the design seems to be working as intended for those who have printed it. Thank you everyone who has provided…

Downloads
69
Likes
8
Rating
0
P
Printablesflodroid

Nintendo DS Fat/Phat (NTR-001) Gridfinity 1x4

Quick sketch for a Gridfinity 1x4 for the OG Nintendo DS Fat/Phat NTR-001. Printed in 0.2mm layer hight

Downloads
67
Likes
8
Rating
0
P
PrintablesWurschtfett

Voron V0.2 Printed Tophat

With this model, you can easily turn your V0.1 hood into a V0.2. And you havent to buy extra extrusions or discs! Just print the appropriate parts, melt in some heat-inserts, and assemble. Have fun! :) Mit diesem Modell, könnt ihr einfach…

Downloads
66
Likes
16
Rating
5
P
PrintablesMorz

Voron V0.1 Tophat Freedom Clips - 3mm - 1/8in

These are Voron V0.1 Tophat Panel clips remixed and optimized for 3mm (~1/8 in") thick polycarb/acrylic panels found in the US. The slots for the panels were sized up from the initial 1.5mm to 3mm so that there will be a better fit. They…

Downloads
65
Likes
14
Rating
5
P
Printableschaaalyy

Voron V0.1 fixed Tophat for 3mm Panels and longer heatinserts

After buying some nice and sturdy 3mm thick acrylic panels from Fermio, i quickly realized, there is need for some serious changements in that tophat-construction. Even though it is originally designed for 2mm panels, the clamping…

Downloads
65
Likes
10
Rating
5
P
Printablescliftoce

Voron 0.2 Tophat Backsplash

After the PTFE tube scuffed up the acrylic top panel on my Trident, I was determined to avoid similar issues on my Voron 0.2. With the correct length of tubing and umbilical wiring, the top panel of the v0.2 is untouched, but the back…

Downloads
63
Likes
20
Rating
0
P
PrintablesBulldog Vos

Tophat

A small tiny Tophat.

Downloads
62
Likes
2
Rating
5
P
Printablesmfetting

PHAT DAC with RCA

Based on the excellent work of "ywabiko", pHat Dac Enclosure. Using Raspberry Zero W 802.11 b/g/n wireless LAN Bluetooth 4.1 Bluetooth Low Energy (BLE) Pimoroni pHAT DAC witb Dual RCA Jack ( https://www.adafruit.com/product/3016 ) 24-bit…

Downloads
59
Likes
3
Rating
0
P
Printablesspiggytech

spiggytech 2x92mm slim tophat for Sirius S40

UPDATED 8/26/2024: putting up some single fan 120mm brackets that never panned out for me. But you might find it useful. This is a small tophat addition to the Sirius S40. It is made to add some more air movement inside the case. You can…

Downloads
58
Likes
1
Rating
0
P
PrintablesCerialPhreak

BBL AMS Tophat

About Disclaimer: While this absolutely can be used without, I designed this to pair with Humebeam's excellent Hydra mod . As the saying goes, necessity breeds invention. Even with the Hydra, I kept having issues with Atomic filament…

Downloads
57
Likes
29
Rating
0
P
PrintablesEtretti

simple tiny-m tophat

simple tophat 4x f695 bearings 2x 35/40mm m5 bolts and locnut 8x 5x12 m5 and t-nuts 2x m5x10-16 8x m5x10 for extrusions 4x 260mm 2020 (or 250mm) only left side pillars is present in cad, just export and mirror.

Downloads
55
Likes
8
Rating
0
P
PrintablesJochemW

Tophat for Philips Hue Lily

Tophat for Philips Hue Lily.

Downloads
54
Likes
2
Rating
0
P
Printables3DPrintingFan

SV08 Tophat / Top Hat filter grill blank blocker placeholder

I blocked off the holes in order to have this part essentially as a placeholder. My idea was to have a grill/filter opening on each side of the top hat in order to have options in the future to attach things or move them (such as a…

Downloads
53
Likes
4
Rating
5

Scuderia AlphaTauri Logo - Formula 1

Formula 1 Alpha Tauri Logo

Downloads
53
Likes
6
Rating
0
P
Printablessonicx

ChromeCast4 & Alphatronics snug fit for Frankia Motorhome

This is a simple snug fit/snap in holder for the Alphatronics TV/sat remote and a ChromeCast4 remote. This TV is used in Frankia motorhomes - probably other places too. Blank back to simplify mounting to wall or under cupboard surface…

Downloads
52
Likes
7
Rating
0
P
Printablessmuk3d

VORON V0 Handles for Door and TopHat and Transport

made it a little bit longer and the door is screwable in Fysetc door panels aktually only the 2mm versions .. because i have 2mm acryl ^^

Downloads
50
Likes
9
Rating
0
P
Printablesdriftrotor

Voron V0.2 R1 Phat Plinth (skirts)

Voron V0.2 r1 Phat Plinth! After building my second V0 I started looking at the aesthetics a bit more closely. Don't get me wrong this is an awesome machine and a joy to print with, so much so I'm building a 3rd! But I wanted to enhance…

Downloads
50
Likes
21
Rating
0
P
PrintablesNuno Vicente

Voron V0.1 one piece Tophat spacer

Remixed one piece tophat spacer that mounts like the tophat. It improves Input Shaper resonances without needing to have the tophat on all the time.

Downloads
49
Likes
8
Rating
5
P
PrintablesJinRoh

Magnetic TopHat for micron+

Botton part has a support structure in the STL. Should be removed, cleaned and covered with FoamTap. The rest should be clearly visible. The number of magnets and screws is optional. It depends on the holding strength you want. BoM: 16x…

Downloads
48
Likes
19
Rating
0
P
PrintablesP V

OV3660 camera mount for voron 0 tophat

There are already two available camera mounts on printables that fit OV3660, but I was not able to user either one of them https://www.printables.com/model/703993-voron-0-usb-camera-mount Great mount, but unfortnutely I bought a 110 fov…

Downloads
47
Likes
6
Rating
5
P
PrintablesDantak

SV08 PTFE tube support for tophat from Nadir @ CN3D

Made for Sovol SV08 TOP HAT Side Exhaust by Nadir@CN3D Better version with smaller footprint that doesn't require any drilling Simple support for PTFE tube so it doesn't dangle around or get into the corner Printing: If you print abs/ASA…

Downloads
46
Likes
12
Rating
0
P
PrintablesDUSTO221

66MM canopy tophat Box Turtle legs

repo is still a work in progress I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use Luc1luc Tophat design Link:…

Downloads
46
Likes
9
Rating
5