P
Printablesspi0003
QIDI plus4 Filament Poop Chute
2mm thickness 330g with 0.2mm layer and tree support narrower≈290g for narrower one, I strongly recommend to use support enforcer as shown in picture I uploaded
- Downloads
- 3,151
- Likes
- 157
- Rating
- 4.92
Search results: plus4
Counting matching models…
P
Printablesstew675
Beacon3D mount for Qidi Plus4
A design for mounting a Beacon3D H Normal probe onto the tool-head of the Qidi Plus4 Update: 10th April 2025 I have uploaded an M3 screw variant of the mount for later model versions of the Plus 3 that use M3 bolts instead of 2.5mm…
- Downloads
- 1,630
- Likes
- 187
- Rating
- 4.89
P
Printablesdrukasz
QIDI Plus4 poop chute
V1.1: much smaller back panel cleaner model PRINT WITH ARACHNE (Orca Slicer: Quality → Wall generator → Arachne). Otherwise the thin support connectors may not print at all. ----------------------------------------------- This is a…
- Downloads
- 1,349
- Likes
- 65
- Rating
- 4.75
P
PrintablesRob Wickham
QIDI Plus4 PTFE Elbow
This is a newer ‘drop that can snap onto the input port of the printhead, and has a bevel on the input side of the elbow to ease install of the PTFE tubing. Note it’s intended to be a firm grip on the process so the tube doesn't easily…
- Downloads
- 823
- Likes
- 101
- Rating
- 4.8
P
PrintablesUser27
QIDI Printers (Q1 Pro, Plus4, X-Max3, X-Plus3, Q2, Max4) Spool Holder with Bearings
I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…
- Downloads
- 711
- Likes
- 97
- Rating
- 5
P
Printablesstew675
50mm Tall Vented Riser For Qidi Plus4
This is the third, and hopefully final revision of a set of vented lid riser pieces for the Qidi Plus 4. This model reduces the weight of my earlier models, and tightens up some of the larger dimensions for a better overall fit. Depending…
- Downloads
- 691
- Likes
- 89
- Rating
- 4.84
P
PrintablesLllotus
Qidi Plus4 Hotend Duct
Summary The Plus4 can sometimes suffer from Heat Creep in certain conditions. This duct/plenum attempts to better route the air from the intake fan over the heatsink to minimise the risk of heat creep for parts with many fine retractions,…
- Downloads
- 589
- Likes
- 89
- Rating
- 4.88
P
Printablesrashuge
Qidi Plus4 Lid Prop
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
- Downloads
- 563
- Likes
- 58
- Rating
- 4.83
P
PrintablesBull Line
QIDI plus4 Filament Poop Slide Out
Adjusted Bambu Poop Chute for QIDI plus4 & https://www.printables.com/@spi0003_2484647
- Downloads
- 516
- Likes
- 27
- Rating
- 5
P
Printablesstew675
Qidi Plus4 Super-light Rear Toolhead Cover
Strong, super-light, minimalist rear tool-head cover for the Qidi Plus 4 Important: Read the Caveats section below even if you read nothing else! Updates 3rd April 2025: I've uploaded a slightly wider model. There was a chance in a very…
- Downloads
- 510
- Likes
- 85
- Rating
- 5
P
PrintablesHandtoolBrad
Qidi Plus4 1" Riser
This is a Fully enclosed 1in riser for the Qidi plus4 printer, Consisting of 6 separate pieces. This has slots done over the grab handles and along the back for material reduction (this is a hefty print as it is) but can be used to put…
- Downloads
- 444
- Likes
- 68
- Rating
- 5
P
PrintablesSarge013
Qidi Plus4 Rear Cover 120mm Fan Spiderweb
A simple rear cover panel for upgrading to a 120mm fan instead of the tiny 4010 fan that cools the motherboard. This lowers the temperature of the board and drivers dramatically. I specifically used this fan - https://amzn.to/40oXwB6 but…
- Downloads
- 441
- Likes
- 70
- Rating
- 5
P
PrintablesJerky_FPV
Qidi Plus4 Belt Tensioners.
Please only print if you are OK with testing. Coming from the DIY printer world, I am not a big fan of the automatic belt tensioners on the Plus4. I desire too much control. So, I made new mounts and an insert to replace them with…
- Downloads
- 385
- Likes
- 81
- Rating
- 0
P
PrintablesJerky_FPV
Qidi Plus4 adjustable spring belt tensioner assembly
Please only print if you are OK with testing. If you're familiar with my previous replacement for the stock Qidi Plus4 auto belt tensioners here , these are an attempt at an improvment on those. This design utilizes the stock spring…
- Downloads
- 343
- Likes
- 69
- Rating
- 5
P
Printables3D Mad Mesh
Qidi Plus4 Spool Holder Riser
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
- Downloads
- 316
- Likes
- 38
- Rating
- 5
P
PrintablesChaotiK DawN
Qidi Plus4 Riser
Update 11/10/2024: Uploaded modified parts 1 - 4 You can find them as parts 1 - 4 V2 Resized them in the middle section, where the PTFE tubing was rubbing against it. With these new parts there's no need to print out plug #3, but you need…
- Downloads
- 309
- Likes
- 45
- Rating
- 5
P
PrintablesRoss3D
310mm Build Plate Holders (for QiDi Plus4, CR-10, etc)
This build plate holder is designed to hold 4 pcs of 310mm build plates. Dimensions: Overall Length: 330mm Main body width: 40mm Overall width: 120mm Overall height: 60mm Print settings (I used PETG, but feel free to print with any…
- Downloads
- 256
- Likes
- 29
- Rating
- 5
P
PrintablesSyncroforge
QIDI Plus4 Compact Poop chute with removable poop tray
Was inspired by the remixed design, but made a few significant changes such as: - Removeable poop tray, with angle of slide adjusted to suit - I found the slide was a little too short for my setup, or it could of just been my mods, so it…
- Downloads
- 245
- Likes
- 14
- Rating
- 5
P
PrintablesMarc Herter
Qidi Plus4 Stepper Driver cooling Fan
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
- Downloads
- 216
- Likes
- 53
- Rating
- 5
P
Printablespizzazz
QIDI Plus4 - Poop Slide with magnetic detachable Trash Cans
Another poop slide for the Qidi Plus 4. This one can be printed in one part as it comes ready with break away supports. It features detachable trash cans in two sizes. The trash cans are held in place by 5 small magnets on each side (10…
- Downloads
- 205
- Likes
- 36
- Rating
- 5
P
PrintablesDan Lavoie
Qidi Plus4 Bearing Spool Holder
Spool holder for Qidi Plus4 with bearings so that your spool will turn smoothly. Materiel needed : 2 x 6804 bearing.
- Downloads
- 201
- Likes
- 34
- Rating
- 5
P
PrintablesAlexey Bychko
QIDI X-MAX3 / X-Plus3 / X-Plus4 extruder part
I created this model to quickly replace the broken part in feeder and continue printing. it works wery well, but step file is also attached. UPD Jun/20/2025: replaced with v11, more sturdy now
- Downloads
- 194
- Likes
- 43
- Rating
- 5
P
Printablesdrathbone
Qidi Plus4 Build Plate Holder x5
Simple build plate holder for 5x 310x310 plates. Printed mine in ABS but should be fine with any material. Hope someone finds it useful.
- Downloads
- 183
- Likes
- 25
- Rating
- 5
P
Printablesb
Qidi Plus4 Rear Cover 120mm Fan Spiderweb with Spacer
This remix adds 3mm of spacers for the ring and screw holes to slightly reduce fan noise.
- Downloads
- 180
- Likes
- 17
- Rating
- 5
P
Printables53Aries
Qidi Q1 and Plus4 toolhead filament sensor
Toolhead filament sensor to replace the Qidi hall filament width sensor. Useful for filament changer systems. Uses the wiring and connector of the original filament width sensor. Uses the 6mm collet from the original filament width…
- Downloads
- 170
- Likes
- 45
- Rating
- 0
P
Printablestomi_one
Qidi Plus4 Toolhead Cover by Tomi - For Beacon or Cartographer with stew675 mount
Qidi Cover – Remix with Hex Pattern & Logo This version of the cover is compatible with Stew675’s project , which allows you to mount a Beacon / Cartographer 3D probe . This model is a remix of the original cover created by @Derek_2843290…
- Downloads
- 163
- Likes
- 19
- Rating
- 5
P
PrintablesBunny Science
Stock Camera Focus and Ventilation Mod for Qidi Plus4
Replaces front panel of stock camera mount to add ventilation and adds easy to grip hood to lens for focus adjustment. Existing camera will need glue removed from its lens barrel to permit focusing. Installation is under ten minute…
- Downloads
- 154
- Likes
- 37
- Rating
- 5
P
Printablespizzazz
QIDI Plus4 - High Airflow Rear Vent Shield Mod for 80mm Fans
The rear vent shield is contained in two versions altered for 24V-80mm-fans for enhanced airflow: A lasercut model from acryl and a printable model with reinforced structure. Both can be fitted with 80mm fans to replace the original, tiny…
- Downloads
- 150
- Likes
- 23
- Rating
- 5
P
PrintablesSergej Riedel
Qidi Plus4 Mounting bracket for mainboard fan
Eine verbesserte Lösung zur Kühlung der Hauptplatine des Druckers, bestehend aus einem Hauptteil und einem Deckel für die Filterseite. Für den Lüfter habe ich mich für dieses Modell entschieden: https://www.amazon.de/dp/B086SKG982 ?. Der…
- Downloads
- 145
- Likes
- 23
- Rating
- 5
P
PrintablesPatrick
Qidi Plus4 Halter für Sunlu S2
Hab mal einen Halter erstellt damit man den Sunlu S2 an der Seite der Qidi Plus4 aufhängen kann. Einfach die 2 Schrauben vom Handgriff abschrauben, den Halter einstecken und die Schrauben wider reinschrauben. Der Haltegriff kann im Gerät…
- Downloads
- 136
- Likes
- 26
- Rating
- 5
P
PrintablesVega D
QIDI Plus4 beacon mount
Compatibility: A very rigid mount for your eddy current probe. Compatible with - Beacon3D revD, revH - Cartographer3D (the one that has the same shape as beacon revD) NOT compatible with: - BTT Eddy The model allows you to swing the probe…
- Downloads
- 135
- Likes
- 36
- Rating
- 3
P
PrintablesSergej Riedel
QIDI Plus4 Filament waste container left site
Dieser Filamentabfallbehälter für die linke Seite des Druckers besteht aus zwei Komponenten: einer Rutsche und einem Sammelbehälter. Die Rutsche besteht aus dem Hauptkörper und einem Deckel, die nach dem Druck einfach zusammengesteckt und…
- Downloads
- 116
- Likes
- 16
- Rating
- 5
P
PrintablesSALITIBI
Encasing for the USB-COM232-PLUS4 circuit board
More info on the PCB can be found here: https://ftdichip.com/products/usb-com232-plus4/ The board is based on an FTDI chip. It is capable of converting 4 RS232 ports to USB. It has 4 DB9 (D-sub) connectors for the serial ports and a mini…
- Downloads
- 115
- Likes
- 4
- Rating
- 5
P
PrintablesSergej Riedel
Qidi Plus4 glass frame, PLUS4 Ventilationsleiste
Diese Erweiterung für den Glasdeckel des Druckers besteht aus sechs Segmenten, die nach dem Drucken einfach ineinander gesteckt werden können. In den Mittelteilen sind zwei Gehäuse für Sepa-Filter mit den Maßen 81 x 42 x 15 mm integriert,…
- Downloads
- 111
- Likes
- 16
- Rating
- 0
P
PrintablesRhiz0Matics
Qidi Plus4 Hinged Monitor Housing
(Excuse my print quality on my sample image, I was experimenting with a new filament.) This is a monitor housing for the Qidi Plus 4 that replaces the original housing. it does a few things: Adds a hinge so that you can adjust the angle…
- Downloads
- 111
- Likes
- 19
- Rating
- 3.5
P
PrintablesRob Wickham
QIDI Plus4 Cover Hangar
Easy way to hang your top cover on the left or right side.
- Downloads
- 106
- Likes
- 17
- Rating
- 0
P
PrintablesMichael Hathaway
Qidi Plus4 adjustable belt tensioner
This design utilizes the stock spring itself but allows the user to adjust the tension with a screw. I have remolded the original model so that there is more material near the top and have added the correct hole size and depth for the M5…
- Downloads
- 102
- Likes
- 19
- Rating
- 4
P
Printablesstew675
Qidi Plus4 Cutter Block End-Stop Replacement
An easy to print, replacement for the Qidi Plus 4 end-stop cutter activation block. Print with a 0.2mm layer height in any material capable of withstanding at least 85C temperatures without going soft Reduces the end-stop exclusion zone…
- Downloads
- 98
- Likes
- 25
- Rating
- 5
P
Printablesesm
QIDI Plus4 Spool Holder and Mount
Models of the OEM spool holder and chassis mount for the QIDI Plus4. These are modified versions of the models from QIDI, but slightly more appropriate for 3D printing (vs. injection molding). I haven't printed these yet, and they have a…
- Downloads
- 96
- Likes
- 13
- Rating
- 5
P
PrintablesBanjoWalrus
Qidi Plus4 Internal HEPA Filter
This is my attempt at making a replacement for the internal chamber circulation fan filter box on the Plus 4 that can accept HEPA filters. I used the same filters as the person who previously designed one, but I designed it a little…
- Downloads
- 95
- Likes
- 15
- Rating
- 0
P
PrintablesGaudibursch74
NanoVNA V2 Plus4 Stand
Stand for the NanoVNA V2 Plus4 With integrated holder for the stylus and the three calibration plugs (open, short, load). In addition, the female/female SMA adapter can be accommodated here. Ständer für den NanoVNA V2 Plus4 mit…
- Downloads
- 95
- Likes
- 12
- Rating
- 4.5
P
Printables3D Mad Mesh
Qidi Plus4 side panel cable protector
I made a small cover for the right side panel bolt. The bed cable has a tendency to get snagged behind it and this cover prevents that. I made a project file for the QidiPlus4 with height modifiers so the final surface finish is…
- Downloads
- 91
- Likes
- 11
- Rating
- 5
P
PrintablesOutback Engineering
Stew675 Beacon Simmetric Holder Reworked for QIDI Plus4
Beacon Simmetric Holder Reworked for QIDI Plus4
- Downloads
- 85
- Likes
- 10
- Rating
- 0
P
PrintablesOutback Engineering
QIDI Plus4 Head Cover for Beacon and STEW675 beacon holder specific version
Please use STEW675 holder https://www.printables.com/model/1253290-modified-for-attach-the-head-front-cover-with-the
- Downloads
- 81
- Likes
- 11
- Rating
- 1
P
PrintablesNicholas Clark
Plus4 Slanted PEI Wiper
I printed Stew's version and noticed the holes didn't quite line up to the stock Plus4 purge bucket assembly. The printed part was also quite wobbly and had very loose clearances with a well tuned machine. I noticed a lot of the printed…
- Downloads
- 78
- Likes
- 13
- Rating
- 5
P
PrintablesMW
Qidi Plus4 Toolhead Enhancements (with Beacon)
My take on a Plus4 tool head beacon mount and cooling mods. A few of the advantages compared to the stock, and other users mods are: Visibility! The nozzle is easy to see from the front of the printer making print progress and nozzle…
- Downloads
- 78
- Likes
- 33
- Rating
- 5
P
PrintablesStur0067
Qidi Plus4 adjustable side spool holder
I was having trouble obtaining a M8 100mm bolt for a reasonable price so I remixed it to use Imperial hardware. Print the aufnahme and mutter STL files from the original. For the spool holder, the following hardware is required 5/16" -…
- Downloads
- 77
- Likes
- 29
- Rating
- 0
P
PrintablesMarcel Wartemann
Qidi Plus4 Cover Mainboard Abdeckung
Qidi Plus4 Cover Mainboard Abdeckung for Bigger Mainboard Fan Better Cooling and easy swap Cooler Amazon :…
- Downloads
- 76
- Likes
- 9
- Rating
- 5
P
PrintablesStur0067
Qidi Plus4 Filament Cutter Buffer Block
Update: This design is now on version 3, which is even less tall that some of the previous makes. It is reliably working on my machine. After printing and installing the modified filament cutter block, I noticed that there was still a lot…
- Downloads
- 75
- Likes
- 25
- Rating
- 5
P
PrintablesTechniCraft Maker Studio
QIDI Plus4 Handle Covers | Flush with Glass
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers lift out easily. I printed on my QIDI Plus4 in "burnt titanium" multicolor ABS in “Strength”…
- Downloads
- 74
- Likes
- 17
- Rating
- 0
P
PrintablesTechniCraft Maker Studio
QIDI Plus4 USB Port Protector
The USB port seems rather overexposed and this seems like an obvious upgrade. Should reduce anxiety and keep the USB port and flash drive protected when replacing the cover. Uses the original flush head case screws. To make it easier to…
- Downloads
- 70
- Likes
- 15
- Rating
- 0
P
PrintablesV1 Engineering
Qidi Plus4 Side Mount Spool Holder
Want to use a lid riser, or just move the spool? Qidi Box in the way....move your spool! Easy print, use your current plus4 spool holder spindle. CAD -…
- Downloads
- 70
- Likes
- 11
- Rating
- 0
P
Printablescsupakabra4
QIDI Plus4 Tensioner (freecad)
UPDATE: RC2: Smaller diameter cylinder so it actually fits through the hole… Smaller length cylinder so you can install it without tension applied to the belts. I only had 30mm long screws at home so I started to design a variant that…
- Downloads
- 69
- Likes
- 16
- Rating
- 0
P
PrintablesMW
Qidi Plus4 Sealed Waste / Poop Box
A quick, complete redesign of a sealed waste / poop box for Qidi Plus4. This box is a bit larger than other similar slot-on models, sits further off the printer (helps with mainboard airflow), and is mostly air-sealed which helps keep the…
- Downloads
- 69
- Likes
- 5
- Rating
- 0
P
PrintablesRhiz0Matics
Qidi Plus4 Toolhead Carriage for Xmax3 Hotends
I had heard that the Xmax3 are the same size as the Plus4 and are swappable (with some changes to the plug) (reports are the q1pro hotends are the same length as the plus4) Later on I heard that it is 4mm short. So I Stewy helped me with…
- Downloads
- 67
- Likes
- 10
- Rating
- 0
P
Printablesosamutake
QIDI Plus4 Tool Holder (Gridfinity-compatible 1x5)
I use the tool holder in the hot chamber of QIDI Plus 4 with a specially designed 1x7-sized Gridfinity-compatible base plate as shown in the photo. It fits perfectly in the dead space in the chamber. It provides the tools exactly where I…
- Downloads
- 66
- Likes
- 8
- Rating
- 0
P
Printablesosamutake
QIDI Plus4 Intra-Chamber Allen Key Holder
I found a hole on the metal frame of my QIDI Plus4 and made use of it to hold this Allen key holder. The holder firmly snaps onto the frame without glue or screws. The Allen keys are dedicated to use in the hot chamber. So I'm happy to…
- Downloads
- 64
- Likes
- 14
- Rating
- 5
P
Printablesblin787
Qidi Plus4 80mm/92mm fan vent cover suitable for hanging bin
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
- Downloads
- 62
- Likes
- 7
- Rating
- 0
P
Printablesosamutake
Nozzle case for QIDI Plus4 (Gridfinity-compatible 1x1x8)
You can store nine Plus4 nozzles in this small Gridfinity-compatible (1x1x8) case with a lid. If you combine it with the specially designed intra-chamber Gridfinity base plate for QIDI Plus4, it stores the nozzles in the dead space of…
- Downloads
- 62
- Likes
- 10
- Rating
- 0
P
Printablestaylptrsn
Heatsink Fan Mount for Qidi Plus4 Phaetus Conch Hotend
Heatsink Fan Mount Ducted Square modified slightly to fit The Conch Qidi Plus4 hotend with Stew675's carrier plate.
- Downloads
- 61
- Likes
- 5
- Rating
- 0
P
PrintablesMoreFilaments
QIDI Plus4 Handle
Replacement for the QIDI Plus4 handle used to lift up the printer. I measured the original one and modeled it in FreeCAD. Now you can make handles in any color you'd like! *Printing I highly recommend printing this laying down to avoid…
- Downloads
- 59
- Likes
- 17
- Rating
- 0
P
PrintablesSergej Riedel
Simple mounting bracket for Qidi Plus4 mainboard fan
Eine verbesserte Lösung zur Kühlung der Hauptplatine des Druckers. Für den Lüfter habe ich mich für dieses Modell entschieden: https://www.amazon.de/dp/B086SKG982? (GDSTIME DC 24V Lüfter, 80 x 25mm). Der ausgewählte Lüfter ist bürstenlos,…
- Downloads
- 58
- Likes
- 6
- Rating
- 0
P
PrintablesAriae
Qidi Plus4 Vanilla-friendly shroud (Hexagon pattern)
This alternative shroud requires 4x m3x12 screws, 4x m3(x2.3mm) nuts and 2x 5x2mm neodymium magnets. Printed in TECBEARS PETG it weighs 32g vs original 40g shroud but will vary depending on filament. See images for print orientation and…
- Downloads
- 58
- Likes
- 11
- Rating
- 0
P
PrintablesRhiz0Matics
Qidi Plus4 Riser print friendly with recirculating carbon filtration vent
I made this because the carbon pellets in the stock machine is too small for high VOC printing like with ABS, this recirculating vent holds a LOT of carbon pellets and a hepa filter as well as 4020 blower fans if you want. like the…
- Downloads
- 57
- Likes
- 8
- Rating
- 1
P
PrintablesRhiz0Matics
Qidi Plus4 Toolhead Cover for Peltier cooling 95% fully enclosed
Want to keep your toolhead cooler than the chamber? use peltier cooling! now with 95% enclosed toolhead! Why are you here? why are you doing this? do you know what you're doing? what if your machine breaks? what if you start a fire? are…
- Downloads
- 56
- Likes
- 12
- Rating
- 0
P
PrintablesTechniCraft Maker Studio
QIDI Plus4 Filament Holder Cap
I received a request to create a replacement cap for the QIDI Plus4 printer filament holder. This seems to work. I'm using it now to print a second one. I'm printing in generic ABS with a 15% grid in infill. I added a 5mm inside & outside…
- Downloads
- 52
- Likes
- 9
- Rating
- 0
P
PrintablesFxWoody
QIDI Plus4 Y-Splitter
Made this for my QBox at tangle sensor. Suggest printing: Mat: ABS - PA612-CF or equivalent (NO PLA) Layers: 0.08 ~ 0.12 max full walls and 100% infill or you can try 1 wall-100%infill with ALL SOLID SURFACE ironing SEE VIDEO…
- Downloads
- 51
- Likes
- 16
- Rating
- 0
P
PrintablesFabTech
Qidi Plus4 board fan upgrade panel. Cuts driver temps in half!
General: This upgrade is for the Qidi Plus4. It helps keep the stepper drivers and motherboard cool when operating the chamber heater. Why I designed this: I was printing some PC-PBT for the first time, and the printer kept shutting down…
- Downloads
- 48
- Likes
- 10
- Rating
- 0
P
Printablesosamutake
QIDI Plus4 Backside Lid Riser
Place the backside edge of QIDI Plus4 lid on this lid riser, to rise the lid to have better air circulation when printing PLA. The lid can be closed without removing them. So, you can keep them always attached to your QIDI Plus4. They are…
- Downloads
- 48
- Likes
- 6
- Rating
- 4
P
PrintablesRhiz0Matics
Qidi Plus4 alternative cooling fan for E3D high temp hotend
This model of the cooling fan moves the fan output nozzle over so that it does not touch the E3D revo High Temp hotend running on a Qidi plus4 Use at your own risk
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
Printablesdrukasz
Side spool holder for QIDI Plus4
This is a spool holder for QIDI Plus4 that you can hang on the side, utilizing the bolts that hold the left lifting handle. As such, it's probably INCOMPATIBLE with many of the available risers You can use it with the stock filament hook…
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesV1 Engineering
Convertable Qidi Plus4 Riser
Need somewhere to put the QidiBox but print a lot of PLA? Like to have more gentle filament feed path tube bends? I made it with a slight angle so I do not pile things on top of my printers, to try and keep things clean :) The walls are…
- Downloads
- 47
- Likes
- 13
- Rating
- 0
P
PrintablesRawcardo
D3P Qidi Plus4 Glass tab
Better Tab to hold the top glass Glass is heavy, use ASA or PETG to avoid heat creep issues. I also suggest gluing them in place Mirror model for other side.
- Downloads
- 47
- Likes
- 6
- Rating
- 3.33
P
PrintablesNicholas Clark
Qidi Plus4 Dual Solid State Relay Bracket
Wanted a second relay to use with an AC heated bed conversion I was doing to the Qidi Plus4 Consult an electrician for wiring if you're not sure how to do it. Stock chamber heater to relay conversion: Red wires on the stock relay are Live…
- Downloads
- 46
- Likes
- 8
- Rating
- 5
P
PrintablestheFPVgeek
Qidi Plus4 Broken Heater Chamber Mount Fix
Qidi Plus4 Broken Heater Chamber Mount Fix - Nut & Bolt substitute. I made this part instead of using the recommended nut-and-bolt solution proposed by Qidi support when my heater chamber fan snapped off. Made this fix to integrate a…
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesJames Scott
Qidi Plus4 - Extended filter basket
This is an extended filter basket. The HEPA can sit on top of the filter and then the carbon material can go below it. The HEPA filter is the same as others https://www.amazon.com/gp/product/B0782T7L6P (HEPA Filters Replacement for ILIFE…
- Downloads
- 36
- Likes
- 7
- Rating
- 0
P
PrintablesВиталий Лукин
Qidi Plus4 Screen Cover
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesSergej Riedel
Qidi Plus4 Cap for filament holder
Eine Ersatzkappe für den originalen Filamenthalter des Qidi Plus4. Sie besteht aus zwei Teilen, die nach dem Druck einfach ineinander gesteckt werden. Die Verbindung hält sehr gut ohne Klebstoff, kann aber bei Bedarf mit Kleber fixiert…
- Downloads
- 35
- Likes
- 7
- Rating
- 0
P
PrintablesBuzz
Qidi Plus4 lid raiser - the bulky one (for Qidi-Box)
I upgraded my top lid raiser after installing the Qidi-Box on top of the lid. The filament changer adds a lot of weight on the top lid, for PLA the hot air has to leave the print enclosure, therefore the raiser. I designed it much bulkier…
- Downloads
- 35
- Likes
- 5
- Rating
- 0
P
PrintablesSergej Riedel
QIDIPlus4 Hepa-Carbon Filter System
Ein Filtersystem, das neben Aktivkohle auch einen Feinfilter enthält, könnte beim Drucken mit ABS von Vorteil sein. Die Aktivkohlepellets werden in das Innere des Filtergehäuses eingefüllt, bis es zu etwa drei Vierteln gefüllt ist. Bevor…
- Downloads
- 34
- Likes
- 6
- Rating
- 5
P
PrintablesDuncan Meyer
Qidi Plus4 side-mounted spool holder
Placing the 1 kg spool lower down reduces the impact of having such a heavy item so far from the printer's centre of gravity. As a bonus, it allows one to see at a glance how much filament is left on the spool, instead of having to crane…
- Downloads
- 33
- Likes
- 7
- Rating
- 0
P
PrintablesTechniCraft Maker Studio
QIDI Plus4 Handle Covers | Flush with Case
I thought it would be nice to replace the ugly useless handles with simple covers. Remove the screws and handles, and set aside. The covers gently pry out with a small slotted screwdriver if needed. Or, tap a screw hole in the middle and…
- Downloads
- 32
- Likes
- 3
- Rating
- 0
P
PrintablesVegasTim
Qidi Plus4 Vented Lid REMIX
A remix of the awesome lid. I printed it in black ASA GF filament.
- Downloads
- 30
- Likes
- 8
- Rating
- 5
P
PrintablesArtem
QIDI Plus4 — Optimized Conch Cold Zone Cooling System (Nylon / Retraction / Pressure Advance)
Переработка охлаждения холодной зоны для QIDI Plus4 с установленным хотендом Phaetus Conch. Проект создавался не как декоративный мод, а как решение конкретной технической проблемы штатной головы QIDI Plus4. Стоковая система охлаждения…
- Downloads
- 30
- Likes
- 7
- Rating
- 0
P
PrintablesRhiz0Matics
Qidi Plus4 riser with recirculating vent for double wall back plate
Follow the same instructions as the model the is remixed off of, and use the new double walled back plate that is posted here https://www.printables.com/model/1237621-draft-beta-double-walled-backplate-for-insulating
- Downloads
- 29
- Likes
- 3
- Rating
- 1
P
PrintablestheFPVgeek
Adapter Standoff for Qidi Plus4 Low Profile Heatsink SSR Mount
I created the adapter standoff for @Sarge013 low profile heatsink SSR mount (FIRST VERSION) . NOTE: There may be a new version available from @Sarge013 now. I had to make these as I was in a slight bind because I had already removed my…
- Downloads
- 28
- Likes
- 5
- Rating
- 0
P
PrintablesBenKitesurfs
Toolhead Cover for Qidi Plus4 with MW Beacon Mount
@MW_3106447 designed a nice mount for the Beacon3d Eddy Current sensor that mounts the sensor behind the head in place of the layer cooling fan. The layer cooling fan is then moved to the front of the toolhead, but the original cover no…
- Downloads
- 27
- Likes
- 10
- Rating
- 0
P
PrintablesStur0067
Qidi Plus4 Box Spoolholder Mount
This is a remix to allow the Qidi Plus4 box hub bracket to attach at the same time as the spool holder. As you can see from the images, it does not block access to the screws for removing the back panel. This spool holder can use either…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesRhiz0Matics
Beta Qidi Plus4 Beacon RevH Mount Front or Side
This mods the stock fan so that there is a place to mount the Beacon RevH. There is also a hole for the cord to go. Use normal Beacon RevH's not the low profile versions First version mounts on the front, the hole is for the cord to go…
- Downloads
- 26
- Likes
- 10
- Rating
- 0
P
PrintablesTechniCraft Maker Studio
QIDI Plus4 Tangle Sensor Tool | Third Hand
I needed a third hand to hold the tangle sensor tube while I depressed the PTFE holder with one hand and inserted the tube securely with the other. Printed in PETG for flexible strength. Used the Plus4 Strength profile. Added a 8mm brim…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesDoug Albrecht
Qidi Plus4 Toolhead Cover for Beacon with stew675 mount
Toolhead cover for Qidi Plus4 when using Beacon3D mod by stew675. Had to save it as .3mf so the colors can be changed to match your filament for beacon logo. I used blue instead of green for the Beacon logo since I didn't have any green…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablestheFPVgeek
Qidi Plus4 10mm x 3mm Belt Tensioner Shim
Qidi Plus4 10mm x 3mm Belt Tensioner Shim There have been report(s) of reducing some VFA using either belt tensioners like one by @Jerky_FPV_1021902 or adding spacers (3 stacked M5 washers) in the stock preloaded tensioners and rewracking…
- Downloads
- 23
- Likes
- 5
- Rating
- 0
P
PrintablesRhiz0Matics
Open for Beta, Qidi Plus4 Articulating Door Hinge No Hands Seal
This is an articulated double hinged door frame seal that I designed some time ago and have only gotten around to testing, it's been up on printables for a while but I minimized tagging it or sharing it to get it to a better releasable…
- Downloads
- 23
- Likes
- 13
- Rating
- 0
P
PrintablesJohn H
Qidi Plus4 92mm fan vent cover suitable for hanging bin
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
Printablesesm
Exhaust Filter Box for Qidi Plus4
Some important notes if you're reading this: The deep version of this is a MOSTLY UNTESTED model. I've printed it once, determined it's dimensionally correct, and then got stuck working on something else. I haven't even tested if the back…
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
PrintablesFanasia Lab
Qidi Plus4 Hotend Duct for Conch and Reinforcer
Mainly to fit the hotend reinforcer for qp4 on makerworld, i ordered a cnc version of it and it seems to improve the first layer as the page said. Not a tight fit, i taped it there with some 3M VHB. The reinforcer model:…
- Downloads
- 20
- Likes
- 3
- Rating
- 5
P
PrintablesJohn H
Qidi Plus4 2x4010 Toolhead
When seeing the original design, I especially wanted to make a toolhead using Noctua's 24v 4010 fans. I did a test print of the original in ABS and the walls were just too thin. One cracked while removing a support and another cracked…
- Downloads
- 19
- Likes
- 5
- Rating
- 0
P
Printablespizzazz
QIDI Plus4 friction reduced filament spool holder upgrade
The original filament spool holder of the QIDI plus4 printer does an adequate job, but in combination with some spool materials a slip-stick-effect can occur causing quite anoying sound emissions, which can easily be mistaken for a…
- Downloads
- 18
- Likes
- 4
- Rating
- 0
P
PrintablesNeil Cristobal
Xplus4 Chamber Screw Holder
A clip to hold the chamber fan with broken screw closer to the wall. This is to avoid bed tilt errors. Use PETG or ASA for better thermal resistance.
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesRhiz0Matics
Beta Qidi Plus4 Toolhead cover for front PCB cooling 2510 fan
There are two models here, one is a stock toolhead cover but modded to include a 2510 fan to cool the front PCB The second is my version of toolhead for a 4020 nozzle heatbreak cooling fan that also has a 2510 cooling fan option for the…
- Downloads
- 16
- Likes
- 5
- Rating
- 0