Search results: ppr

Sort order

644 models

P
Printablesmcfada

Ryobi Laser Cube Alignment and Leveling Stand for Garmin Approach R10 Golf Launch Monitor

This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,415
Likes
66
Rating
4.86
P
PrintablesPeter Farell

Rosslyn Chapel Master and Apprentice Pillar.

Rosslyn Chapel Master and Apprentice Pillar.

Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant

Downloads
734
Likes
113
Rating
5
P
Printablesgdownton

Ranger's Apprentice Throwing Knife or Knives

This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
464
Likes
102
Rating
5
P
Printablesgdownton

Ranger's Apprentice Saxe Knife (version 1)

This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The Saxe Knife has a…

Print approx. €0.92–€1.13 excl. taxPreliminary estimate for one variant

Downloads
440
Likes
87
Rating
4.67
P
PrintablesZakoplex

Adorable Bunny Magnets - Easy to print tiny bunny magnets to make your fridge happy. Appreciate the likes and downloads. Thanks! :)

Adorable little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute. The little ears provide some grip to lift the bunnies off the fridge in a humane way. Finally tried to pause at layer in a…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
433
Likes
126
Rating
5
P
PrintablesvmLOGIC

Watering can - approx. 1 liter capacity

First of all thanks to krom for the beautiful original model and sharing the f3d file. You should print the watering can with PETG . With PLA there is a risk that the can will leak. I printed with 100% infill to be on the safe side. It…

Print approx. €12.76–€15.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
308
Likes
50
Rating
4.67
P
PrintablesMarin

Magnet Load to suppress vibration

This is an accessory to reduce print bed vibration. I have been irritated by noise my MK3S printer bed does produce during printing. First I simply pressed down the printer bed with my finger, while printer is printing to see if it does…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
6
Rating
0
P
PrintablesExtra Fox

[Printer-Box] Fire Suppression Mounts

After seeing a few pictures of burned out 3D printers I got the urge to add some fire suppression measures to my new enclosure. In this case I've gone with the BlazeCut T025 Fire Suppression System which is also the one the Prusa…

Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
47
Likes
16
Rating
5
P
PrintablesAinon3Dtisk

MK23 SOCOM Airsoft Suppressor 150mm M14x1L

Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…

Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
PrintablesFupsen

Suppressor v1

No supports

Print approx. €0.86–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
1
Rating
0
P
PrintablesPrinteyy

Helldivers 2 - Ministry of truth approval stamp

Simple stamp based on vector logo, can be used to stamp things. Final effect will depend on haw you'll press it, which and how much paint will be used. Try it first on test surface, that will be similar or the same as the final one. Based…

Print approx. €1.85–€2.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
4
Rating
0
P
PrintablesCDaemon

Prusa Mini Base vibration suppression leg extensions

Helps to make my Prusa Mini+ even quieter. A light remix of some excellent leg extensions that snap into the legs of the Prusa Mini Base: https://www.printables.com/model/63483-prusa-mini-base) Remixed from this model:…

Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
22
Likes
9
Rating
0
P
Printables3vilc00kie

Approve Brick

You worked so hard on this merge request. All these failing tests you fixed. It finally works in staging. The changelog is up to date and you already labeled it reviewable . But what is this? *chirp chirp * No one is approving it. You…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
5
Rating
0
P
Printablesmcfada

Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid

This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…

Downloads
5,634
Likes
200
Rating
4.92
P
PrintablesRecticle

Airsoft Suppressor SOCOM 2 Series 14x1 CCW

Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…

Downloads
3,895
Likes
427
Rating
4.86
P
PrintablesTinyTexas

LW-PLA/PLA RC Plane - Pusher Propeller (PProp)

Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…

Downloads
3,274
Likes
451
Rating
5
P
PrintablesjonnieZG

Stackable Airsoft Suppressor Baffle

This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…

Downloads
3,075
Likes
350
Rating
4.75
P
PrintablesjonnieZG

Custom Airsoft Suppressor Baffle Sponge

The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…

Downloads
2,003
Likes
252
Rating
0
P
PrintablesAVieira

"Osprey" Airsoft Suppressor

This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…

Downloads
1,843
Likes
347
Rating
5
P
Printablestrupik666

Suppressor/silencer for my gb-22

This socom silencer should be compatible with my gb-22.

Downloads
1,567
Likes
79
Rating
0

Knitting Stitch Marker - “field-tested”, “knitter-approved”

Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…

Downloads
1,423
Likes
290
Rating
4.97
P
PrintablesJorge

Synology NAS - Rattling noise suppression

Important notice: First thing is first:) This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, that will be greatly appreciated. I know…

Downloads
1,117
Likes
240
Rating
4.95
P
PrintablesGodlikeOne

Mock Suppressor For Airsoft - 14MM Counter-Clockwise (CCW) Threads - Fits xCortech Tracer

I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…

Downloads
1,092
Likes
98
Rating
3.67
P
Printablescoffee beann
Downloads
1,036
Likes
96
Rating
0
P
PrintablesMeca Dynamics

AAP-01 Suppressor 70mm

Do you like tiny suppressor like me? I present to you my little custom suppressor for the AAP-01! You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun! !!!!!!! AIRSOFT ONLY !!!!!!!…

Downloads
941
Likes
89
Rating
4.88
P
PrintablesAlex

Approximately Gripen model jet fighter

made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it

Downloads
940
Likes
85
Rating
4
P

AEA HP MAX stackable silencer/suppressor

Your printer needs to be able to print fine threads. I used some silicone grease to make them easier to fit/screw on. NO SUPPORT NEEDED :) The threads are m30.5x1 You can "infinitely" stack this suppressor

Downloads
893
Likes
55
Rating
4.33
P
PrintablesQuentinL

Shortened version of V4 suppressor

I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…

Downloads
879
Likes
99
Rating
4.67
P
PrintablesStikkan
18+

The source marked this model as adult content.

Downloads
836
Likes
101
Rating
5
P
PrintablesAVieira

Airsoft Hex Suppressor - OTB

There's two versions, "OTB" (Over The Barrel) has the thread around the middle of the silencer and the normal version has the thread at the base. Silencer dimensions: 157mm x 35mm OTB: The barrel hole is 15mm and the thread starts 70mm in…

Downloads
802
Likes
149
Rating
5
P
PrintablesMirko

Air Gun / Air Rifle Silencer Moderator Suppressor 1/2" UNF Thread

This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…

Downloads
794
Likes
70
Rating
0
P
PrintablesMars1307

Suppressor/Silencer for SSG24

Hi, thanks for downloading my file! I made this suppressor/silencer for my Novritsch SSG24, because the one Novritsch sold on his website was a bit too expensive for my taste. How it's made This silencer is made up of three easy-to-print…

Downloads
788
Likes
82
Rating
4
P
PrintablesKerry

Airgun Moderator/Suppressor/Silencer

I print this with some brim, because it's rather tall for how little area it has to adhere to the print bed. Needs no support. I printed it in PLA but I assume any filament will also work fine. Should fit any airgun with a ½"-20 UNF…

Downloads
782
Likes
54
Rating
5
P
PrintablesMarekZCMB

Suppressor

SP-01 Shadow 119x22mm, 1/2x28, cal. 6.0mm SP-01 Shadow 119x22mm, M12x1, cal. 4.5mm

Downloads
755
Likes
56
Rating
5
P
PrintablesBobBlazevic

Prusa i3 Noise Suppression Feet

Easy to print feet to help stop the printer transferring resonance vibration to the work table. If your new printer turned your table into a drum, you want these. Cheaper, easier, lighter, and better looking than a slab of cement. No need…

Downloads
751
Likes
169
Rating
4.88
P
PrintablesKerry

Donny FL Air Gun Moderator/Suppressor Baffle

Insert this baffle into a Donny FL suppressor to make it quieter. I've experimented with several different types of baffles and this is the best one I've found. Mine is for a PCP .22, - but this baffle could certainly be modified or…

Downloads
725
Likes
37
Rating
0
P
PrintablesCitruspers

MP9 suppressor adapter (airsoft)

An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.

Downloads
680
Likes
28
Rating
0
P
PrintablesFischi

Suppressor Holder; Silencer Holder

Hey, this is my first Thing. I design this holder for a hunting friend of mine. Feel free to used it. High: 150 mm deep: plate 6 mm, holder: 76 mm width: 70 mm hole: 55 mm diameter I used supports only for the top of the hole. Print…

Downloads
680
Likes
45
Rating
5
P
PrintablesCitruspers

L96/MB01 suppressor adapter (airsoft)

Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…

Downloads
611
Likes
40
Rating
0
P
PrintablesXer0

Crosman DPMS SBR Suppressor Concept

This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…

Downloads
596
Likes
58
Rating
5
P
PrintablesMZ4250

Raccoon Wizard and his Apprentice, Raccoon, and Raccoon Mount Minis!

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
589
Likes
134
Rating
5
P
PrintablesDrEduza

PP750 internal suppressor replacement

This is meant as silencer/suppressor replacement for SPA PP750 cal. 5.5 mm internal suppressor. I accidentally lost the originals, so I did this one. I've also put cotton wool outside the K-baffles, works better than original imho. Each…

Downloads
578
Likes
44
Rating
0
P
PrintablesBioAlex

BioSuppressor for Airsoft

A 3D printable mock suppressor for airsoft guns. The thread is inset inside the suppressor by 50mm. The suppressor is suitable for RIFs with a threading of 14mm CCW. The front end of the suppressor unscrews to allow access to the inside…

Downloads
575
Likes
71
Rating
0
P
PrintablesFaceHaver

Air Rifle Suppressor - for felt/foam

Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…

Downloads
568
Likes
73
Rating
0
P
PrintablesNn

Belt buckle quick release 7,6x4,8 cm / 3x2 inc approx.

Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.

Downloads
552
Likes
67
Rating
5
P
PrintablesPanicCarefully

Optical Illusion wind wheel - EOS_01 (approx. 45cm / 17,7") - NO-GLUE version available

------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…

Downloads
529
Likes
137
Rating
4.9
P
Printables3DMake4U

Teacher Appreciation / Graduation Owl Gift

You will need to glue individual parts together.

Downloads
524
Likes
102
Rating
5
P
Printablesgdownton

Ranger's Apprentice Oakleaf Medallion Necklace

This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…

Downloads
515
Likes
127
Rating
5

Centauri Carbon Fan Intake/Exhaust & Noise Suppression Flange Plate

This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…

Downloads
492
Likes
113
Rating
0
P
PrintablesMichael Rios

DTKP HEXAGON SUPPRESSOR

40% infill PLA or PETG

Downloads
488
Likes
24
Rating
0
P
PrintablesThomas Bonnici

Cat scratcher - Cat approved

Its a cat scratcher... print it, grab it, play with your cat with it.

Downloads
482
Likes
75
Rating
5
P
PrintablesEdan farr

Honeycomb 14MM CCW thread Airsoft suppressor

Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…

Downloads
470
Likes
49
Rating
5
P
PrintablesMarvin

Garmin Approach R10 levelling stand

A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.

Downloads
453
Likes
12
Rating
0
P
PrintablesMirko

Diana Stormrider / Bandit Air Gun Silencer Moderator Suppressor M10x1 Thread

This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…

Downloads
446
Likes
27
Rating
0
P
PrintablesMarmaduck

Airsoft Octagon Slim Suppressor Foam Ready (MTW)

I recently bought a Wolverine MTW and wanted to have an integrated/nested suppressor in the handguard, but the more I looked the more I had difficulty finding one that would fit AND that I liked. The internal diameter of the MTW's…

Downloads
438
Likes
60
Rating
5
P
PrintablesCargy

Simple Rugged Box/Clamshell Case - Approx 165mm (L) x 110mm (W) x 60mm (H)

This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…

Downloads
430
Likes
184
Rating
0
P
Printablesbengineer700

Cricket Disc Golf Putter, PDGA Approved

I wanted to bag a disc at tournaments that I made , so I started the process of designing a putter that was fairly stable, but could handle some anhyzer/flex. During the design process I realized the disc also floats in water pretty…

Downloads
424
Likes
46
Rating
5
P
PrintablesMichael Rios

AIRSOFT M4 SUPPRESSOR

40% Infill PLA or PETG

Downloads
421
Likes
38
Rating
0
P
Printablestachanka71

Mock Suppressor for Airsoft-14mm CCW Threads

print with brim for better adhesion

Downloads
418
Likes
26
Rating
5
P
PrintablesPeter Farell

Apprentice Pillar from Rosslyn Chapel

Reproduction of the Apprentice Pillar inside Rosslyn Chapel. Reduced polygon count so you can import it to Tinkercad. Category: Scans & Replicas

Downloads
417
Likes
55
Rating
5
P
PrintablesUnknown1622

127 mm ( 5" ) Airsoft Mock Suppressor / Silencer ( 1/2 inch CW thread )

print thread side up 100% infill 0.2 mm layer height

Downloads
417
Likes
29
Rating
0
P
PrintablesHINNERK

Monster Energy Airsoft suppressor

print it, drink your Energy, make a hole in the top, size as large as the opening for adapter (14mm) glue it together. ready to shot.

Downloads
398
Likes
96
Rating
5
P
Printablesm00nd0gg

Airsoft King Arms PDW 9mm Mock Suppressor

Airsoft only. Not for firearms. Barrel extension / mock suppressor for King Arms PDW 9mm SBR M-Lok airsoft rifle for extending the barrel for a 363 mm ( https://www.amazon.com/gp/product/B078SC421D/ ). First version broke at the thread…

Downloads
384
Likes
54
Rating
0

Abrazadera para PPR de 20, 25 y 32mm + SW parametrico (Pipe clamp for 20, 25 and 32mm PPR + SW parametric)

Hecho para un proyecto personal, estas abrazaderas sirven para mantener la tubería tipo PPR estándar en su lugar. Verifica la superficie de contacto antes de imprimir. Dependiendo de tu impresora puede que necesites escalarla entre 1% y…

Downloads
379
Likes
34
Rating
5
P
Printablesrickypc

22 Suppressor. Sectional baffles.

Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…

Downloads
378
Likes
51
Rating
0
P
Printables3DMason

Fat Airsoft Suppressor for Umarex T4e HDR/HDP/TR-50 -.50 CAL-

Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…

Downloads
374
Likes
33
Rating
0
P
Printablesjoseph james

Airsoft Monster suppressor/silencer (Functional)

This is only guaranteed to work with 16oz white monster energy cans due to some flavors being different sizes. You're welcome to try others but don't say I didn't warn you. Make one cut around the can (I've found that the best/easiest…

Downloads
367
Likes
48
Rating
5
P
PrintablesAHMan

REMIXED Suppressor Trojan NTX Libra

The original file for this suppressor had issues where the inner diameter was too small for a 6mm BB to pass through. This file has a larger inner diameter as well as a larger overall body with support for 14mm CCW threads. This…

Downloads
348
Likes
29
Rating
5
P
PrintablesAndrás Bognár

Unbreakable Propeller Guard for CineWhoops (The Engineer's Approach)

Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…

Downloads
347
Likes
36
Rating
0
P
PrintablesMichael

Glock Sight Pusher Installation Tool for Suppressor Height Irons (fits Glock)

After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…

Downloads
343
Likes
75
Rating
3.5
P
PrintablesWesley Rogers

Airsoft Tracer Housing/Mock Suppressor

The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…

Downloads
337
Likes
44
Rating
5
P
PrintablesZodiase

Long Mock Suppressor (requires tracer unit with threads)

Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…

Downloads
330
Likes
31
Rating
5
P
Printablesgdownton

Ranger's Apprentice Double Scabbard

This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. There are 3 parts to…

Downloads
321
Likes
125
Rating
5
P
PrintablesMcTiTeJl

Mansions of Madness Second Edition - suppressed memories and recurring nightmares miniatures

Miniatures of all detectives and monsters from the add-ons suppressed memories and recurring nightmares miniatures. Mansions of Madness Second Edition — Recurring Nightmares: 8 detectives: Michael McGlen, Sister Mary, Gloria Goldberg,…

Downloads
313
Likes
35
Rating
0
P
PrintablesNixqy

Glock Sight Pusher - Suppressor Height Sights

I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…

Downloads
309
Likes
58
Rating
4.5
P
PrintablesRaelyn Rose

CYMA AK suppressor.

This is a very simple MOCK airsoft suppressor i designed for very specific reasons. i have a cyma standard ak 105 carbine. CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft…

Downloads
307
Likes
26
Rating
0
P
Printableswtxmetriod

Airsoft suppressor insert, Avengers QD Mock Suppressor

Designed to fit in the Avengers QD Mock suppressor that is modeled after a Knights Armament suppressor. I had some problems with the “.20 SPEED” preset, but “.20 STRUCTURAL” worked fine. Mock Suppressor:…

Downloads
306
Likes
26
Rating
0
P
Printablescoolcow

Apprentice S15e cool cowl - replacement part

On my second flight day my Apprentice S15e experienced a rapid unscheduled descent and consequently partial disassembly. The (let's name it...) crash wasn't very hard, but hard enough to brake the front wheel hinge and the cowl. A new…

Downloads
303
Likes
8
Rating
5
P
Printablesschreinerman

clippprrr - Freezer and Food Bag Clip

Freezer and Food Bag Clip

Downloads
300
Likes
28
Rating
3
P
Printablesmaverickagm

Crosman 1322 suppressor

A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…

Downloads
299
Likes
21
Rating
4.5
P
PrintablesCharles Timko

Toppl Stoppr

A plug for the hole in a Toppl L-size dog toy treat dispenser (should work on XL) so that you can freeze the treats for your furry friend.

Downloads
298
Likes
11
Rating
0
P
Printablescoffee hunter

Suppressor Holder / Schalldämpferhalter

Bei 15cm Druckhöhe hat der Halter einen Innendurchmesser von 6cm. Die Aussparungen für die Magnete sind in der aktuellen Version für 20mm Durchmesser und ca. 5mm dicke Magnete gemacht. In der Mitte hatten meine Magnete ein Loch, das ich…

Downloads
293
Likes
17
Rating
5
P
PrintablesFaceHaver

HW40/P17 Suppressor Adapter

Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction. The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a…

Downloads
280
Likes
13
Rating
0
P
Printablesrebeltaz

Sorcerer's Apprentice Mickey from Fantasia

Sorcerer Mickey by jprzybylski is absolutely amazing. In fact, it's a little TOO amazing. My system had trouble working with such a high resolution model. I converted this to an STL and reduced the resolution by half, but even at that,…

Downloads
280
Likes
42
Rating
2.5
P
PrintablesKN16

DL-44 Flash Suppressor Threaded for 1/2" x 28

A replica of the muzzle device on Han Solo's DL-44 Blaster. It is set up to work with 1/2" x 28 threads. it will thread onto AWCY's Proto Barrel ends (available elsewhere). Either the "One Part Option - Permanent" or the “Two Part Option…

Downloads
280
Likes
28
Rating
0
P
PrintablesBengineer

Overstable Approach Disc (Zone Clone)

This is an overstable approach disc similar to a Discraft Zone, or MVP Entropy. Prints well in PLA, but for best results and durability, print in TPU.

Downloads
274
Likes
29
Rating
5
P

Rat Battle Armor (Pet Rat Approved)

This silly model is scaled to a standard domesticated pet rat (female rat, sizing may vary). It is intended to be segmented and connected together with string or a rubber band. Most likely, you may have some difficulty convincing your rat…

Downloads
271
Likes
119
Rating
5
P
Printablesandz 0001

Saker ASR muzzle brake and suppressor combo (AK thread)

The suppressor goes over the muzzle brake . Thread on bottom of the muzzle brake is 14x1L , compatible with most AK style replicas , muzzle break - suppressor body joint is a M22 standard thread with 1.75mm clearance , suppressor-end cap…

Downloads
257
Likes
21
Rating
0
P
PrintablesOptikalblitz

MK Oppressor - Coffee Filter Shaping Die

Inspired by the OREA Negotiator filter press tool, this model is designed to allow you to press your coffee filter into place for the ‘no-bypass’ method of pour-over coffee brewing. The general conical shape and central stem are about the…

Downloads
246
Likes
20
Rating
0
P
PrintablesIvan Allen

E-flite Apprentice STS Cowl

I found this on Thingiverse, and thought that I should upload it here. "Found out what the range was on my transmitter unfortunately and crashed my Apprentice STS. Never liked the stock cowl design so I came up with this. Use a 10% infill…

Downloads
244
Likes
6
Rating
0
P
PrintablesdeSuperNoodle

Replica Suppressor for Working Glock-18 Replica from CSGO/CS2

Replica Glock-18 found here → Click Me The suppressor isn't modeled after any specific IRL suppressors. It's meant to be simple. Installation: Slide the suppressor into the barrel. The side with the rifling will go into the barrel and use…

Downloads
237
Likes
48
Rating
0
P
PrintablesDarkstar Arms

Suppressor/Silencer Mount

NOTE: The revised version fixes a few minor errors and adds additional vertical support. These were designed to allow you to mount multiple suppressors of varying calibers to different surfaces including walls, safe doors, etc… These…

Downloads
235
Likes
24
Rating
0
P
Printablesewwbananas

Valentines Day & Teacher appreciation keychains gift

Keychains for teacher appreciation. First Layer is .3, rest of the layers printed at .15. Starting with red or pink! Add pause at 1.65mm and change red (or pink) to white Wait to cool off, pop off the plate and add keychain . I glued up…

Downloads
225
Likes
52
Rating
0
P
PrintablesJoKeR_1337

Filament leftovers trash / recycle bin (approx. 100x100x200mm)

Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)

Downloads
223
Likes
21
Rating
5
P
PrintablesMrNlCE

Big Chungus but with an appropriate number of polygons and support for teeth

Found this but saw that the teeth failed added some supports just in his mouth. Will print later and update results. Edit: Had to change XY compensation to 0.1 (Prusa Slicer) as the supports wouldn't appear in the slicer. Print Settings…

Downloads
222
Likes
15
Rating
5
P
PrintablesLuc Vanraes

Modular airsoft suppresor

Made for 14mm negative threading. The single module threads onto itself. Based on jeffreyyyd's Basic Airsoft Suppressor on Thingiverse. https://www.thingiverse.com/thing:2505514

Downloads
221
Likes
30
Rating
0

Disapproval Cat

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018: Print one for the person in your life who causes you to make this face on a daily basis! This is my first attempt at sculpting in Blender. Michelangelo's…

Downloads
220
Likes
48
Rating
5
P
PrintablesS&L's 3D makes

extended nerf barrel with suppresser

a remix of the extended nerf barrel with a suppresser.

Downloads
219
Likes
20
Rating
0
P
PrintablesBažusLab

shot suppressor with M12x1 internal thread

Tlumič výstřelu s vnitřním závitem M12x1

Downloads
215
Likes
11
Rating
0
P
PrintablesIvan Allen

E-Flite Apprentice STS Heavy Duty Motor Mount

I found this on Thingiverse, and thought I should upload it here. The original file was created by sutekh, but it was broken, so Rickmcolorado repaired it. Here's the original post: “A friend with an Apprentice needed a bulked up motor…

Downloads
212
Likes
7
Rating
5