3,857 models
Introducing Grabby the Claw! This model is designed to use all of the main connection types that you'll find in my 3D printable action figures. It uses only a few grams of filament, and prints in about half an hour on modern printers.…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
This is new version of my previous Filament Quick Clamp models. Features: Prevents filament spool from unraveling. Filament is easy to snap in place by a clever gripper mechanism. Clamp and gripper is spring loaded by a single internal…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…
Print approx. €4.48–€5.48 excl. taxPreliminary estimate for PETGSource material: PET
Now updated to an improved V2 design with additional “Compact” and “Belt” variants available! See update log for details. Summary: Extremely versatile hook and D-ring style carabiner combo, inspired by ITW GrimLoc carabiners I have been…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
structural integrity holds up enough to print in PLA can be printed at any scale, but at double size it became really hard to pull back the firing mechanism even at the regular size these pack a punch, so be careful
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Update 24.06.2026 Released the F3D and STEP files of the entire assembly Added a compact backplate (50mm wide) 1. Introduction I needed a sturdy and reliable design to remove the Monitor stand from a 24"-ish Monitor, intended for use in a…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
We've been playing with this fortune telling fidget for days on end. Six possible responses for your fortune, but we also just like to play and spin the dice. Print it in your favorite colors, or mimic the magic 8 ball that inspired it.…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print. Versions: Two versions are available: Blank and Faceted. Both function identically, however blank prints…
Print approx. €4.63–€5.66 excl. taxPreliminary estimate for one variant
This is the standard GoPro quick release clip with a built-in locking mechanism -single print, no assembly needed. I have used James Rogers's model from GrabCAD.com ( https://grabcad.com/library/gopro-quick-release-mount-standard ). Print…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
I wanted to use the Prusa Dryboxes with a PTFE-Tubing clamp instead of the plastic-flap gap that the dryboxes currently use. You don't even need to re-print the whole box! This piece simply attaches to the backside of the original drybox…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
Hose quick connector male to ¾" BSP commonly found on UK garden hose fittings e.g. Hozelock, Gardena etc. Add one standard o-ring 2.5x11 (OD: 16mm, cross section 2.5mm) to make leakproof. I printed in standard PLA settings, supports…
Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant
Original Printfiles here https://www.thingiverse.com/thing:3681512. There's also a build instruction. The mobile phone holder is not compatible with new iPhones which have the large stove camera lenses on the back. The holder is only…
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
The footprint has been made as little as possible to avoid marks in your newly painted objects. Therefor, they are well suited for stacking multiple painted objects on a small working area. Stackable for easy storage Red (Big) :…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
I needed a quick disconnect to be able to swap my dust collector from one mobile tool to another. I could not find what I needed on PrusaPrinters, but I found one on another site that unfortunately did not fit properly. I redid it to fit…
Print approx. €7.08–€8.66 excl. taxPreliminary estimate for PETGSource material: PET
1 inch (D=32mm) female adapter for quick coupling garden hose to water tap. It can be printed without supports. O-ring is needed (Outer diameter = 16mm, inner diameter = 11mm, seal cross section = 2,5mm) and gasket between water tap and…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for PETGSource material: PET
I cut a lot of paper models on the Cricut Maker and I'm constantly changing between the scoring tool and the cutting tool. Putting the unused tool inside the pocket makes it hard to grab, and if it put on the desk when things are messy it…
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
All in one calibration cube, small, useful and quick to print under 25* minutes! Looking to get the most out of your 3D printer? Look no further than our calibration cube! With its precisely measured dimensions and intricate design, this…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
I searched for a quick-release filament gripper/clipper that would meet my needs, but I could not find one I liked, so I created a versatile three-way clip. I did not like how an unused filament held on the spool guide of my MK4, as it…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print and great to display books, phones, tablets, pictures or other … If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant
Add a quick release to ANYTHING! Add quick release to any existing project! Just import the STLs into your slicer, align the mounts and BAM! Quick released! (Coming Soon) Print-ready models for mounting a thing to a thing with a quick…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Ever had the urge to ditch your keychain trinkets for a moment? With this magnetic, super-secure connection, you can easily break free and reunite whenever you please! Grab two magnets (10 x 2 mm). Like these ones. Press one into each of…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A very smart way to swap your steering wheel for g29 and g27. it has a hole that is 10 mm to lock the steering wheel into place. Use a pen, screw or anything in that hole. You can also 3D print a pin that is 50 mm long and 10 mm in…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Update V4: Closed a small gap in the bottom part. The plug of the PSU quick-release cable is not nice to look at with the exposed cables. It looks much nicer with a housing! Fits the MK3S+ and the MK4 version oft the cable. I know, there…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Introduction: This case features a flexible lid and base that allow for quick pull-to-open and push-to-close use, while full-length threads keep the lid securely in place. The threaded design also allows you to adjust the length to fit…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for PETGSource material: PET
I designed these to add a bit of variation and help make dust less noticeable. Their main advantage is that nothing needs to be disassembled. They simply slide in from the side through their opening, fitting snugly without the need for…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Project Summary: Using this to adapt to a hopper window insert for venting my resin printer in a grow tent. My Print Settings: 20% gyroid infill .2mm height Support from build plate for flange half (connection studs) Printed with PLA
Print approx. €7.11–€8.68 excl. taxPreliminary estimate for one variant
My first model! Still learning FreeCAD This holds a Dial Indicator in my lathe's quick-change toolpost. I chose PETG 0.20mm because it's sufficient. And I have mostly PETG, but it should work in other materials. The model is upright…
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for PETGSource material: PET
this is a remix of a model on thingiverse i recommend 1mm layer height with a 0.4 mm nozzle for the cap and 2-3mm layer height for the discs petg is probably best for this OD: Bokeh kit for e.g. Canon 50 mm lens. 28 mm disks. OC: Bokeh…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Printable replica of the original Manfroto 200LT-PL quick release plate. This custom model is a precise duplicate of the original design, ensuring a seamless fit and perfect functionality on your tripod. Download and print this accurate…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
EN: Adapter is used to connect the Quick Coupling of the Garden System G.F. BIG s.r.l. (Italy) to the standard 1-inch thread of the Garden Pump. I used Teflon tape to seal the thread and a 22.5 x 2.5 mm rubber O-ring for the quick…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for PETGSource material: PET
Get your files, fast Store your documents, magazines, books and printbed sheets vertically with instant access. No need to open drawers or pull out magazine files. The optional stopper keeps everything at the front of deep cabinets. One…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Are you tired to screw the bar-nuts every five minutes during your workout, like me? Then easy print you some “Weight-Clamps” 💪 → simply squeeze togehter and slide on The nuts are designed for a spindle Ø28 x 3 mm. Tested with a weight of…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for PETGSource material: PET
Same model as the one from Will, but the text is centered, and the font is replaced with the official Prusa logo font (FreeSans).
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Introduction This is a replacement cartridge for the Philips Cleaning Pod model AC52/01 . It is not a copy of the original cartridges, but is designed to be fully compatible with the original Cleaning Pod, and optimized for easy 3D…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
this is a simple bracket/ support pin for shelves in closets and cabinets
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Background : I missed a quick release cable for the X-LCD screen of the MK4 in the Original PRUSA enclosure. I like the quick release idea for the powersupply with a single connector. Prusa unfortunately has currently not such solution…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Quarter Inch Quick Connect Fitting Retaining Clip
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for PETGSource material: PET
This is a small addition to the quick release for mask strap design. It hinges in place on the last spindle of the quick release design and closes to hold the straps of the mask tightly. I printed at 0.1mm layer height, four instances…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Funnel. Print in vase mode.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
This is an improved (out of necessity) version of my own MK3 style heatbed cover for the Prusa Mini. It still features: MK3 style; Allows for heatbed connectors on top for optimal current flow; Reliefs the cable and helps prevents…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
4 X Magnetic 5.00mm X 4.00mm
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This plan pot is super simple. It's made of two parts to make it easy to print. No supports. Fusion360 file included
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Print main body with for example petg & o-ring with TPU. O-ring with no infill & 1 - 2 walls all around. Main body with for example 4 outer walls & some infill. Files without o-ring also included.
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
A flush, no-snag plug for the hole in an InLine Fabrication Flush Mount Quick Change Base Plate for when there's no quick change plate attached. Prevents small objects and debris from falling into the hole in the base plate when there's…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for PETGSource material: PET
Tested with my iPhone 15 on a Macbook Air and a Macbook Pro. Print with PETG for some flex allowing for phones with or without cases.
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
For anyone who knows that just one Festool MFT workbench is not enough, here is a dedicated accessory to join two workbenches together! Base model is 200mm, so can either be printed in multiples or scaled in Y as needed to cover the…
Print approx. €16.19–€19.78 excl. taxPreliminary estimate for one variant
doporučuji tisknout z pevnějších materialů jako je ABS, PETG, PC,…. podpěry nejsou třeba pokud se vetší díl tiskne pod úhlem (na skosenou plochu) ----------------- I recommend printing from stronger materials such as ABS, PETG, PC,….…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of bpienig's excellent model which I found did not quite fit my rather geriatric tripod. In this remix the “wedge-shaped” foot has been enlarged slightly. The 3mf includes 100% infill for for the “foot” as this is what the…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
Intro This is an updated and modified version of my previous Workbee dust shoe . The previous version had a wing nut sticking out of the side (which I found a bit annoying although it wasn't hitting the Workbee frame) and the attachment…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for PETGSource material: PET
Quick assorted collar stays in various sizes. Includes 2 inch, 2.25 inch, 2.50 inch and 2.75 inch (51mm, 57mm, 64mm, 70mm). These can be printed before you figure out how to tie a tie!
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
24.06.2024: Eine praktische Anwendung habe ich nun hier umgesetzt/ I have now implemented a practical application here . Dies ist ein Versuch, um festzustellen, ob es möglich ist, eine Schnellspannmutter zu drucken und ob sie eine…
Print approx. €1.89–€2.30 excl. taxPreliminary estimate for PETGSource material: PET
Unfortunately my saddle bag hangs so low that it covers my rear light when mountet to the seatpost. So i modified the Garmin Varia Mount by "ad hoc" and modified it to fit a rear light. I recommend printing it from PETG. But if you leave…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Quick Wire / cable Connector Terminal Block Spring Connector wire holder (Multiple types) with space for small labels. I needed a holder to hold multiple types of these different type of wire connectors. The fit is tight because I don't…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
A quick project for a printer waste container that can be used for other purposes.
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Overview Most city bikes have the ability to have a rack in the back of the bike. These tend to be very narrow and it is common that people strap on crates or bags to make these racks usable. Almost universally these are difficult to…
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET
You can print with PLA any color Schwalbenschwanz-Konus Buchsen but by careful. It is possible to loose keys. You can adapt the flow rate in prusa slicer or scale the SSKB a bit bigger to produce pressingfriction. Please take a drop…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
I wanted a simple one-piece sample spool that I could print quickly. So I sketched this up. It was designed with the “complex vase mode” techniques highlighted in this video There's a version with holes for the filament ends and one…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Quickstar crazyglue gridfinity holder. The glue isnt the best but it is like $15 ish for 50 "single use" tubes.
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
When the Prusa PSU quick-release is used, the pass-thru is useless and another hole in the enclosure to be closed. This model covers the pass-thru hole from the inside. It is simply snapped between the PSU and the back panel over the…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
I designed this for my lawnmower that has handles which have to be loosened every time it is put away. The idea is that instead of unscrewing the nuts that hold the handles together you just release a clip. No unscrewing. Much faster to…
Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Hier ein Modell-Satz um das XLCD Display des Prusa MK4 und MK4S schnell an den Drucker oder vom Drucker abzukoppeln und es Außerhalb vom Druckergehäuse zu verwenden. Die Kabel habe ich mir alle neu erstellt um die originalen Kabel zu…
Print approx. €4.64–€5.67 excl. taxPreliminary estimate for PETGSource material: PET
this quick mounts are for a well-known Pi camera mounting system “IR-Pi Cam Prusa i3 MK3/MK3s Camera mount Swivel Package” I wanted to quickly mount the Pi Camera from one place to another without having to screw it all the time. The…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
repair broken handle
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Update June 1, 2023: After 3 years of being in direct sunlight and intense Texas heat this replacement part is still holding up. I've probably had this solid brass shutoff valve and quick connect for 30 years. So when the knob for the…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Quick release cable, IDC Connectors holder Post connector for 26 Pin. Schnellverschlussverbindung, IDC-Steckerhalter, Pfostenstecker für 26 Pin Die awh 24g-e202-idc 24 Pin steckerleiste sind schwer zu bekommen darum bau ich sie aus 26 Pin…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
This 3D model is a compact EDC Quick-Access Third-Hand Holder , designed to temporarily secure everyday objects during tasks that normally require more than two hands. It acts as a reliable “third hand,” enabling efficient, controlled,…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
🎣 3D Printed Popper Fishing Lure A simple 3D printed popper-style fishing lure designed as a quick project for anglers who don't have specialized lure-making equipment. The lure is neutrally buoyant or slightly sinking and works best with…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
The thumb screw for my Moza Mini-P gimbal broke (well more disintegrated) the night before a filming day. I'm a newbie so this stupid thing took me 3 hours but it saved the gimbal. Before you fit the cap on the screw, make sure all…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
These are a selection of phone accessories that use my UTQD system. Just unclip the accessory to use Magsafe freely. The .stl and .step files are included for easy modification. Check out the first phone case compatible with UTQD for an…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Background: I have a multi-panel exercise pen made from heavy wire that looks like this: I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage. This model attaches to a wall…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
I don't keep my power supplies mounted to the back of the enclosure, but needed a way to quick-disconnect from the printer. Slanted connection keeps it out of the way of the heat bed cable. Requires one pair of Anderson PowerPole…
Print approx. €3.85–€4.71 excl. taxPreliminary estimate for PETGSource material: PET
This universal connector allows the use to connect any compatible accessory to a mounting point with a thickness of at least 2mm (aka the maximum thickness of iPhone cases for Magsafe compatibility). There are two options available for…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
I scaled “ishikawats” XL Filament Quick Clamp with clip so that it can be used with 2KG spool's. “ishikawats” has XS, M, L, and XL available Description from “ishikawats” design, I used the same: Mechanism is fully print-in-place. Add…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
This is my entry for the CMF Phone 2 Pro contest. The contest inspired me to create a mounting solution that still allowed Magsafe to function. So I targeted a thickness of 2mm, and came up with the idea for this connector while on a…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…
Print approx. €5.46–€6.68 excl. taxPreliminary estimate for PETGSource material: PET
Schlauchaufnahme ca. 25 mm tief konisch: unten ca. 34 mm; oben ca. 34,7 mm
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Toilet paper version here ( Exclusive model for members ): https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r A paper towel holder with a print in place mechanism and quick release and load…
Update 11.05.2025 : The bug in the 3D model (male hose quick connector 3/4") has been fixed. Quick garden connector compatible with standard garden taps. 1. Quick connector male for garden hose 3/4 and 1/2: 2. Quick connector female for…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Simple yet strong hook, perfect for hanging clothes, towels, bags, and more. The beveled edges are optimized for a great first-print result and to ensure they won’t damage fabrics. If you’d like to support my work, leaving a ♡ like ♥ or…
Post-Processing Difficulty: Easy (Ready to Use from Printer Without Processing) Tools Needed: None Introduction: QUICK-CLIP (GEN 3) is a versatile mounting system that I designed to fit standard backpack and MOLLE straps/webbing. This is…
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Wall Mount Quick fastening system for panels and coverings - Sistema universale di Fissaggio rapido a Pressione Available in two models: Wms_1 - Wms_3 Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements…
* The TINY printer test* is designed to print in minutes, so you can quickly tweak & test your printer settings and get better prints.** Just a few centimetres across, it can print in as little as 10/15 mins and includes 10+ different…
This model was missing from Printable so I upload with credit to the original creator under Creative Commons.
This is a simple 70mm x 70mm first layer test & adjust print.* .3mf files included for PLA, PETG & ABS BEFORE PRINTING THIS: Please consider - -Your build plate and print nozzle are clean -Follow your printer manufacturer's methods bed…
Easy To Print - Works With Screws 3 sizes
This is an update of my HexMaille fabric, with cleaned up edges and two different size options. Most 3D printed fabrics have a bajillion tiny vertical sections that are fragile and take forever to print. They also end up being kind of…
This print-in-place paper towel holder allows you to change the roll quickly and one-handed. Printing and mounting Print the two holders with the sides facing the build plate. Supports are not required. Break the hinges loose and move…
Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…
I've been playing too much Call of Duty lately and decided to make a print in place “quick-reload” paper towel holder. Largest paper towel I've tested is Costco's 6" diameter paper towels. Installation notes: When determining the spacing…
A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…
Meet Bruno, the charming little hedgehog that fits right in the palm of your hand! With its cute round shape and spiky details, Bruno is an easy and fun print, ready in just 25 minutes. No supports needed, making it hassle-free for any…
