268 models
This is the V2 version of my ergonomic multi size bottle opener, a stronger, more robust redesign made for users who prefer extra durability and stability. Compared to the previous version, this model is reinforced, making it less…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
Wire Bender Tool a 3D printed solution for bending steel wires with ease. Crafted for practicality, this tool is designed in two separate parts to enhance durability. It's capable of bending steel wires of up to 1mm in diameter…
Print approx. €4.21–€5.14 excl. taxPreliminary estimate for one variant
This is a remix of the original RØDE NT USB mount by ozykisser. This design offers the best stability due to the double bracket and the radii to avoid mechanical stress peaks. Nonetheless, the original design is not usable for FDM due to…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…
Print approx. €2.53–€3.10 excl. taxPreliminary estimate for PETGSource material: PET
Minimal through-bolted mount I designed for my Robust live center and ring drive center attachments… https://www.turnrobust.com/product/live Also fits similar ¾-10 centers by OneWay, Savanah, etc. The weight is on the through-bolt or wood…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
This is a rock solid mount for any camera equipment that uses a standard ¼"-20 screw. The mount is modeled after the spool holder that comes with the Prusa Original Enclosure. It screws perfectly into any of the enclosure's corner…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
The goal was to create a buckle design that is durable and of course adapted to 3d printing. It often happens that the buckle (e.g. on a backpack) breaks when you step on it. I believe that these 3d printed buckles will last, since they…
Might be slightly over-engineered, but I always keep a few different sizes on my key-chain. That way I'm always ready, when a zipper pull on or around me breaks. Saved me and my friends a bunch of times already. Print recommendations:…
There are plenty of drain snake STLs out there, but this one has bite. The design allows larger teeth while keeping the snake small enough to slip into drains. Prints in less than 30 minutes and works well at 0.20mm layer height. Fun…
Check out the new V2 too :) https://www.printables.com/model/692209-robust-finger-skateboard-v2-durable-rollable-fully/files Board 1: WIth Chamfer Board 2: With radius Printing Instructions: Print the axis massive with as many perimeter…
With these 3D-printed tools, you can create strong and long-lasting springs yourself! — not only for the Wire Stripper Pro ( https://www.printables.com/model/1482697-wire-stripper-pro-functional-maker-tool ), but for many other projects…
Simple one piece cherry pitter made for roughly 25mm (1") cherries. If you have some huge ones, scale accordingly. Printing: PETG 0.2 layer height, 4 walls, 5 top and bottom layers, 25+% gyroid infill Use your favorite supports.…
Info: remodelled and made a great model from @Meistel Edel (thx!) parametric , so any size can be easily created any width/height any number of holes the plate is 3.2mm thick Variations: exported few most common variations for convenient…
Shells for the Nerf Sledgefire blaster that can take a beating. Regular triple shell for Elite darts, single Mega dart shell, shell for a 16mm PVC tube for single Elite darts and a blank shell for anyone that wants to create their own…
A better more robust version of the GoPro tripod mount (with an editable file) This GoPro tripod mount design provides superior strength and durability and outperforms all vertical designs. Optimized for the strongest printed orientation…
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
Descripción: Caja impresa en 3D inspirada en el diseño de las cajas Milwaukee, ideal para presentar pequeños objetos valiosos de forma elegante y segura. Su diseño cuenta con un cierre seguro y una bisagra resistente para garantizar la…
I designed this mount for my digital calipers to be more sturdy since a model I downloaded broke dropping my calipers. I made this to be really beefy and even printed it in ASA but Im sure PLA will work just fine. Design overkill? Yes,…
Describtion: There are a lot of AMS risers on printables and I looked at all of them. Most of them have the same issue: They are large, beefy and need supports to be printed - that means lots of filament are necessary. I wanted a riser,…
Robust power strip mount. Advantages: Firm clamping mechanism - no wiggling. Mount with screws or cable ties on walls, panels, etc.. Robust design for heavy use (e.g. in a workshop) Designs: variable number of outlets: bracket_single.stl…
Una alternativa muy económica a la Rasbperry Pi es la Orange Pi con su amplia gama http://www.orangepi.org/ . El precio de esta plaquita como la Zero 3 , es realmente bajo (unos 17 euros aproximadamente). Me he comprado una y por eso le…
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
Heyho I built a finger skateboard some time ago and I'm still super happy with it myself :) The first parts I printed back then are still alive and working like the first day. But some people had problems with the pressfit during…
Having tried many different empty spool based storage systems and creating a couple of varieties myself, I kept coming back to the same conclusions... I didnt want to drill new holes in the spool, i didnt want to faff with lining up…
A simple but very stable wall mount for any keyboard. Specialty is the reinforced bottom avoiding breaking it on heavy use as with other designs. Use stable double-sided adhesive to mount, e.g. Tesa Powerbond Ultra Strong.
I broke the strap buckle on a pair of spike sandals and needed a replacement. I found many alternative designs - all of which were either weak and broke again, or didn't grip the strap sufficiently to be useful. This re-design addresses…
Improved version of my previous Robust BUCKLES model ( https://www.printables.com/model/281536-robust-buckles ) for better durability and printability. Improvements: Optimized compliant lever shape. Stress along the lever is now evenly…
Es el tipico tornillo de banco. Muy util para ciertas tareas
Features: Heavy-Duty Design: Integrated curved support strut provides high rigidity and strength. 8-Screw Mounting: Designed with 8 countersunk screw holes (4 top, 4 bottom) for flush, secure wall mounting. Clean Aesthetics: Rounded edges…
Universal tablet mount for home trainer bikes or similar. There are two versions available to download, one for landscape and one for portrait. Only two parts differ for the two versions. In “Other Files” you will find the Assembly…
I've had this battery box for a while now and use it for travel. Now I uploaded it here on Printables . It is durable and you can throw it in your bag among other things. Comes in two designs, one for AA batteries (7pcs) and one for AAA…
Un bras porte-smartphone imprimé à 100% en 3D qui offre, au moins, trois axes. Et l’option de doubles accolades entre les axes. Dans la configuration standard, le bras supporte facilement environ 500 grammes dans n’importe quelle…
Thanks to rorys3D for this incredible design. My overhangs are not great so I edited the model with built-in supports for ease of printing and support removal. 0.2mm layer height is recommended. Parts are oriented the right way. Snap the…
I've recently managed to snap a clip on my Dyson v10, which basically turns the vacuum into an expensive paperweight. Since gluing the clip wouldn't work, I created an adapter. Clip fits snugly around the original clips remains - if yours…
I used one of these for 2 years before it was beginning to fail, so I designed a new toothpaste reel with thicker, stronger, and bigger components, made to be printed in optimal positions for strength. after 36 months I have seen very…
As I just very recently entered the world of 3d-printing, I was asked for a helmet stand to dry and store a helmet on. So I fired up fusion 360 and started modeling one. Credits need to be given to my dad for not only introducing me to…
Two versions: - with M3 mounting holes for fastening jig to the surface - without mounting holes Print without supports and brims. I uploaded STEP models for both if anyone wants to use different screws or make any other changes. Enjoy!
Printed in PLA, PETG should work as well Use 0.2 - 0.1 mm layer height Do not print standing Infill 10% or more. When opened, stack the case on other to use it as cigar stand to let cigar rest. When importing to PrusaSlicer make sure to…
Well, my bike got stolen and with it the light mounts, but I still have the bike lights. So here is a replacement. It mounts with O-ring sealing rings around a tube. There is a 5mm x 11mm hole to glue a magnet in. Pay attention to the…
Check rorys' description for how to print them.
Why this Remix? I really liked the Y-splitter for Bambu Lab's AMS unit that Ed Johnson published. I tried two previous Y splitters but they weren't as reliable / smooth as Ed's version with the PC4-M10 connectors. The only thing I didn't…
I made some size adjustments. I pulled in the bottom and widened the top, which allows for effective launching of Dart
Simple small shoe horn. Model size: 96 x 39 x 35 mm Added areas on the sides for easier printing. Printed with brim Optimized for a 0.4 mm nozzle Layer height: 0.16 mm Material: PETG 3 wall loops Only 3 meters of filament, less than 10g.…
1. Introduction Winter……oops………Hot Summer is Coming ! That's why I bought a portable air conditioner with a 150mm hose. Unfortunately, it is common here in Europe to have “casement windows” (windows with vertical rotation axis) while…
Never loose your badge with this robust ID badge holder. I use it around my campus. mine is from PLA and has worked excellent. takes around 1h to print (on a 60mm/s machine) Recommend printing with flat face down, Infill at 100% Raft (if…
I love my Tiny Tina. However, I was going crazy every time I had to exchange the destroyed propguards. Beside that there were some more things that annoyed me, so here is my take on a more improved, more robust version. Base: I added a…
Spool Holder Desk mount clamp remixed from Desk Mount Headphone Holder by Beaver utilizing the original Elegoo Neptune 3 Pro Spool Holder part In addition to the clamp you need to print the “ desk_headphone_holder_screw ” and the “…
Pièces de replacement pour le système de nettoyage de buse de la Qidi Q1 Pro. Le mien ayant cassé (pas étonnant). Assemblage testé au niveau montage et fonctionnement à vide, mais pas essayé sur la machine encore pour le moment. Le…
A sturdy cable chain with opening doors to speed up maintenance and cable management :3
This is an ice scoop designed with thick walls and a robust back end where the handle attaches. The robust design was done to avoid separation at the print layers particularly near the handle where leverage from the handle exerts pressure…
Modelo de caja para poner en la plataforma Skadis , el modelo tiene 150x100x40 de exterior, con un interior de 145x96x37 , queda muy fuerte ya que coje hasta 7 ganchos de la skadis, permite poner cosas pesadas en el interior.
Remix of a really cool set of designs for mounting airtags on a strap. I wanted to attach an airtag along a molle strap on my bag but the bottom panel of the original designs was too large to get underneath. This design breaks the bottom…
cigar mold I made for 3D printing, it has the ring gauge for a robusto, but the length is pretty oversized I haven't thested it yet, and if I do and I change something, I'll delete this or update it, but it has quarter milimeter of error…
Bisagra para las tapas practicables de mi armario IKEA LACK NIDO PRINTER ENCLOSURE GEEETECH A10M para la impresora, basado en el mueble de IKEA Lack Nido https://www.thingiverse.com/thing:5801562 Basado en el diseño de bisagra de…
This x-belt tensioner combines several advantages of other designs: moves force of tension from z-axis to x-axis rods to prevent z-axis bending (similar to many others e.g. this or this ) allows to reuse existing belt and pulley by…
Jan 2020: It may be worth checking out my latest design - Hydra Fan Duct & Tool Change System which IMHO is far better in a lot of ways than this Hero Me remix. Link: https://www.thingiverse.com/thing:4062242 06\01\20 Uploaded 4010 fan…
Deutsch: Stabiler und schlichter Regalwinkel zum Befestigen von Regalbrettern an der Wand. Das Modell ist in zwei verschiedenen Größen verfügbar: 210 × 250 mm (für größere Regalbretter oder höhere Belastung) 160 × 190 mm (für kleinere…
This project provides a robust and fully 3D printable modular chain system, complete with two types of versatile hooks. The design focuses on easy printing of individual components and straightforward post-print assembly , allowing you to…
Handle is stronger than original one please lay on bed on longer side… Buy me a coffee: https://ko-fi.com/jokereuc
I needed a simple but robust stand for my laptop during the hot summer to help it stay cool while coding, this is what came out. It tilts the computer at it's maximum to have a vertical screen, so you will need an external keyboard and…
It was decided that since I had a 3D printer I should design and make some furniture for the doll house my old dad was restoring for my great niece. Now I figured 3d printed legs on things would simply snap off in the hands of a 5yo so…
A more robust print for attaching a Tile Sticker to your pet's collar. I have two young pooches who like to chew stuff so any sort of “dangly” version of attaching the tracker to their collars is a recipe for vacuuming up very tiny pieces…
Strong and robust construction. Easy stackable with strong connection. Minimal support nedeed. Mounting holes are 3 mm in diameter. Dimension depth: 84 mm width: 82 mm height: 16 mm Recommendations: Wall line count: 3 Top layers: 3 or 4…
I liked @Dominsch's original design, which feels simple and robust. But didn't see why it wouldn't work with more clearance to make the print less prone to fusing the teeth. So I did a quick reimplementation in Fusion and added more…
the original model was very good, I just reinforced the fixing paste which broke too easily
Print in PETG or similar No brim required Done in under 30 min Galactic made a great design, I only changed one small detail. For people like myself who have to painstakingly pry every PETG print off their heatbed, I added a small raised…
This print combines one of the cheap Powerbank modules with a single 18650 cell. The modules are readily available on eBay and the likes when searching for “Powerbank module" for like 1…2 Euros. It's just two wires soldered to the module;…
3 in 1 simple and robust ice scraper. Print in place. Ice removal from your car windscreen Frost buildup removal Cleaning windscreen wipers Smooth corners help protect the rubber window seals. The angled shape of the ice scraper…
This is a remix of the wheels for the finger skateboard from Meister Edel. I realy like the Skateboard but the construction of the axes and the wheels was not working for me, so I made a simler version of the wheels. Just glue on one…
Robust under desk laptop mount, each part held with 4 screws. It's thick, it's tough, it's made to last. max laptop thickness: 27mm Let me know if you need a bigger one :) PETG recommended, but should work with PLA as well. 30% cubic…
This turntable is designed for a Futaba FP-S148 Servo modified for 360 degree rotation. You will also need four 13.5mm ball bearings and M3 hardware for mounting. There are numerous mounting holes on both the bottom and top of the…
Many thanks to @Prze87mo_296900 for his version of the depressor mount. I adjusted the model to fit the “more robust belt path”-mod for the original Switchwire. I also added a breakaway support structure so you don't have to use print…
This exclusive 3D printed flower pot seamlessly blends functionality and aesthetics. Crafted using BambuLab P1S, the pot features dimensions of 10.4cm in diameter and 8cm in height, providing ample space for your plants. The three-walled…
Headphone support made with two different parts to save plastic and make the printing shorter
These are two wall mounts for filament rack. You can use broomstick or some other rod. There are two files. Other is just mirrored version. I used 25% gyroid infill. Seems to hold 13 x 1kg filament rolls just fine.
It's sturdy. I have printed it at 1.6mm wall with 25% infill
Después de ver e imprimir muchos soportes de móviles, me decidí a diseñar uno fácil de imprimir, robusto, con regulación de inclinación, universal que sirviera para todos los móviles. Mi sorpresa fue cuando me di cuenta de que podia ser…
Highly durable TCG game mat tube with magnets - Fallen Dice logo
Two versions: - with M3 mounting holes for fastening jig to the surface - without mounting holes Print without supports and brims. I uploaded STEP models for both if anyone wants to use different screws or make any other changes.
I've printed quite a few other single cell holder, but all of them left something to be desired. The ones with 3d spring either doesn't have enough force or its will get weaker with use. Some use hardware that's hard / troublesome to…
Features: This card holder fits ISO/IEC 7810 ID-1 size cards 85.6×53.98 mm/3.370×2.125 in" It's a common size for office ID cards, credit cards, and membership cards The cap positively locks the card in the holder, it prevents the card…
This build uses cheap standard components; design was done from scratch with two main targets: robust operation => 3mm wall thickness easy, fast printing => small overall size, minimum support requirements Components needed: Arduino nano…
Print this model twice and get yourself a round bar or tube with a diameter of 16mm. Within 5 minutes you will have a cheap but sturdy and modern looking towel rack. The round bar can be made of aluminium like in the picture, but…
A robust triangle key. 9mm triangle side 15mm diameter 6mm deep Printed at a 45° angle for extra strength. Use PETG or ABS for more sturdiness. 0.15mm layer height 4 walls 40% infill No support Brim optionnal
The case is easy to print and requires 4pcs of M2.5 x 12mm screws ( link ) and 10pin 2x5 connector (I used an old one from a fake and useless stlink v2, but here you can buy a new one: link ). With this type of connector soldered to the…
A simple but robust kitchen scraper/dough scraper/dough cutter. A must for every home cook and home baker. Great for picking chopped veggies up from your cutting board, portioning your dough when making pizza or rolls, and cleaning the…
Heyho Yesturday I came up with the desire to create my own turn table xD So here it is! Features Strong : I designed this Table to hold quite some weights. The main tolerance/ wiggling will be due to the bearing itself. In my tests I…
Je možné různě nastavit a dotáhnout. Díky šroubům drží opravdu pevně. Lze vynechat prostřední část. Je možné přidat i další mezidíl a tím mít další možnost regulace. Použity šrouby 1x M5x40 (pro montáž bez středového dílu). 1x M5x50, 1x…
Hi I constructed a counting train for my children. They can learn to count in a playful way or solve simple arithmetic problems (subtracting and adding, for example). They can also come into contact with numbers for the first time. All…
Very robust, quick to use, and simple to print Ryobi power tool holder with thick walls. Side mountable. Tested to fit the R18DP7 Cordless Combi Drill and R18IW3 Cordless Impact wrench. It is likely to fit multiple drills, but it has only…
This is remix of bike light mount on Thule Chariot. This remix is more robust as you can see on picture (right = original, left = remix)
I added holes and extended the locking arms on the build plate to improve printability.
Diese Box ist ideal, um Kleinteile, Werkzeug, Elektronikzubehör oder Bastelmaterial ordentlich und sicher aufzubewahren. Das Design ist schlicht, stabil und so ausgelegt, dass es sich leicht und zuverlässig drucken lässt. ✅…
A carry case for 2 robusto cigars up to 5.5" long, ring gage 60 including a size 4 boveda pack. (The case is slightly oversized to account for wrapping on the cigars). 3 stl files are provided: Cigar_Case_Robusto_Case.stl - the main case…
Robustic table cloth clips. I also use it for building bunker from towel with my kids. Two different sizes: Small for desk thiknes from 18 to 24mm Big for desk thiknes from 20 to 30mm Printed with PETG
Most extruder rotation visualizers rely on superglue to hold the magnet on. This is not very reliable, as the magnet tends to fall off. So I designed better model, where the 8 mm magnet is held in a sleeve.
I like the Sturdy Handles by jeoje but wanted to round the top and bottom of the handle profile so the sides don't cut into my hand. And then I got carried away by the power of 3D CAD and added personalized text to the top of the handle.…
