Search results: s30

Sort order

332 models

P
PrintablesMaurizio Lenzi

GoBo projector for Bowens mount flash (Godox MS300V)

A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…

Print approx. €3.03–€3.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
601
Likes
93
Rating
5
P
Printablespcfronin

Antenna Recreation for Toyota IS200 IS300 Altezza Gita Sportcross

If you have found this model I guess like me you have broken your antenna while washing the car, moving a cover or just looking at it the wrong way. So I got replacement then modeled it the best I could to match to the original toyota…

Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
8
Rating
0
P
PrintablesCatSailer1279

DPS3005 / DPS5005 Bench Case

Small enclosure for the DPS3005 / DPS5005 or any other DPS without extra PCB. I used M3 injection nuts to fix the back cover and safety banana sockets to be able to use multimeter probes. On the backside is a DC power socket . The M3…

Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant

Downloads
58
Likes
7
Rating
0
P
Printables3D Shuttle

AstroNots Starship MMU Version (S30/S31)

Farben 1 Galaxy Silber https://www.prusa3d.com/de/produkt/prusament-pla-galaxy-silver-1kg/ 2 Anthrazit https://www.dasfilament.de/filament-spulen/pla-1-75-mm/444/pla-filament-1-75-mm-anthrazit-v2?c=11 3 Schwarz…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
7
Rating
0
P
Printableskweg

YALPS - Yet another lab power supply based on DPS3005 and ender 3 24V original power supply

So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…

Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
6
Rating
0
P
PrintablesPetr Stehlík

Case for DPS3005 power supply

Case for the DPS3005 programmable power supply. Created in OnShape.com - here's the source: https://cad.onshape.com/documents/a387dafa34ddb2b0b1734add/w/661b6e36556eeb673311f490/e/dcde09774cb5d0aa43c715d4 And here's the whole story:…

Print approx. €2.92–€3.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
32
Likes
2
Rating
0
P
PrintablesTDM465

FRC MS3000 camera mount

A remix of FRC3038's camera mount for better camera fit/hold and more istall options. This is a WIP (ver 2); Version 3 may have print-in nuts for the tilt axis to elliminate the need for the 3.5"+ tilt bolt

Print approx. €4.06–€4.97 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
0
Rating
0
P
PrintablesJPG_master

Laser engraver Honeycomb board positioner and "fixation" - Sculpfun S30 ( S10 ?, S9 ? )

General Update how to support different Sculfun products / configurations: If your HoneyComb Board used is NOT the same size like mine: exactly 405 mm ( X-Axis ) by 405 mm ( Y-Axis ) mm we need to adopt the distancers. Measures and sizes…

Downloads
1,405
Likes
123
Rating
5
P
PrintablesChillora

Netgear GS308EP 10 inch Rackmount

3D printed rackmount enclosure for the GS308EP (should also work for GS308EPP model)

Downloads
951
Likes
52
Rating
4.88
P
PrintablesAndys1957

Sculpfun S30Pro Modifications

Update 30.11.22: English translation added (scroll down) Ich habe vor ein paar Tagen einen Sculpfun S30Pro Lasergravierer bekommen. Die Maschine ist klasse, benötigt aber meiner Meinung nach ein paar Optimierungen: 1. Cablechain Die lose…

Downloads
912
Likes
81
Rating
5
P
PrintablesCodyG

Lexus IS300 Cupholder, the full replacement

Install instructions and the original launch video here:

Downloads
842
Likes
43
Rating
5
P
PrintablesTomzi1234

Sculpfun S30 calibration cilynder holder

Small simple holder for Sculpfun S30 focus cylinder holder, that attaches to rail.

Downloads
687
Likes
51
Rating
4.86
P
PrintablesErwin

Sculpfun S9 to S30 Laser height extender (with lower base)

All models were originally too high for my purpose so here we go: These attachments only raise the laser by 3mm as a first step, which still allows cutting paper or cardboard. Only when you attach the extensions does it get 30mm higher.…

Downloads
668
Likes
59
Rating
4.83
P
PrintablesJPG_master

Sculpfun S30 Pro Modifications – Revamp !!!

UPDATE March 2025 All please NOTE …. this is valid for all of my Sculpfun related designs: The Sculpfun modells AND accessories incl 3rd party DO COME WITH VARYING SIZE PARAMETERS. My Laser Frame size is: X-Direction 510mm and Laser…

Downloads
600
Likes
46
Rating
5
P
PrintablesCollingall

SNES30 SFC30 Controller Stand

Display Stand for the SNES30 or SFC30 controller should work just fine with the Super NT versions of those controllers. Category: Video Games

Downloads
580
Likes
54
Rating
4.89
P
PrintablesCollingall

NES30 NES Controller Stand

Stand for the NES30 Controller, it is also compatible with an original NES controller and the NES Classic controller. Easy to print, no angles exceed 20 degrees so no supports are required. I printed mine at 0.2mm layers with a 15%…

Downloads
498
Likes
68
Rating
5
P
Printablesnzt2afrb5e3y

ESP32 ⨯ Sensirion SPS30+SCD41+SGP41 case

how to build All sensors are from Sensirion. They all use I²C bus. The two little ones can withstand 3.3V and 5V, the PM sensor needs 5V. I choose to operate the little ones at 3.3V to minimize their heating. The SCL and SDA wires can be…

Downloads
491
Likes
50
Rating
5
P
PrintablesJPG_master

Laser engraver Rotary Roller and other purpose Height Adjustment Set - Sculpfun S30 ( S10 ?, S9 ? )

NOTE: The printable part that are mounted to the sculpfun frame ( 2020 extrusion profile ) here are designed to fit to the “coats” around the original legs of a sculpfun laser. For the coats pls refer to one of my other models ! ( The…

Downloads
475
Likes
49
Rating
5
P
Printablesdrhollen

ZWO Seestar S30 / S50 Equatorial (EQ) Wedge Adapter - Adjustable

This adapter aids in balancing a ZWO Seestar S30 or S50 smart telescope over the center of gravity of the tripod when used in equatorial (EQ) mode using an adjustable EQ wedge. Say goodbye to field rotation and hello to zenith imaging…

Downloads
466
Likes
42
Rating
3.5
P
PrintablesAxel

NETGEAR GS308E 10" Rack Mount

A 10" Rack Mount for the NETGEAR GS308E Managed Switch . Features The sides include a honeycomb structure for better airflow. Two small screws can be mounted on the floor part which will hold GS308E in place. Printing The print takes a…

Downloads
448
Likes
22
Rating
5

Netgear GS305 switch under-desk mount

Switch dimensions: 94mm width 26mm height without the feet mounting holes: 6.5mm diameter 35mm center distance

Downloads
444
Likes
54
Rating
5
P
PrintablesSilverBullet126

EMAX ES3054 17g Servo

A reference STL for the EMAX ES 3054 17g servo. All dimensions are approximate per my measurements using my own servo and the spec drawings. If you'd like the Fusion 360 source feel free to msg me with your email.

Downloads
430
Likes
0
Rating
0
P
PrintablesTomInNrthrnIll

Seestar S30 Drop-open Dew Shield V1.2 Won't jam in EQ mode

Seestar S30 Fall-Away Dewshield and Masks-Stop worrying about shutting down with the dewshield installed! Version 1.2 has a longer front plate so that it won't jam in EQ mode! When I bought my Seestar S50, I had to buy this equipment ($70…

Downloads
401
Likes
18
Rating
0
P
PrintablesBenni

Netgear GS308 Switch wall mount

Wall mount (invisible screws) for Netgear Switch GS308T

Downloads
376
Likes
27
Rating
5
P
Printables6d6178

BAHCO Combination Square Holder for Ikea Skadis, CS150, CS300

This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…

Downloads
351
Likes
49
Rating
4.75
P
PrintablesÖhrkie

Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700

Hier eine Erweiterung für den Bohnenbehälter des Siemens EQ.9 S300, S500 & S700. Diese wird lediglich auf den originalen Behälter gesteckt und der originale Deckel kann weiterhin verwendet werden. Die Lautstärke des Mahlwerks wird nicht…

Downloads
346
Likes
10
Rating
0
P
Printableslifour

Seestar S30 dust cover

Dust cover / lens cap for ZWO Seestar S30 smart telescope

Downloads
325
Likes
6
Rating
5
P
Printablesaschmitz

Rack Shelf for CRS305-1G-4S+IN

A small shelf designed to hold the MikroTik CRS305-1G-4S+IN switch in place and connect to a server rack. There are small pegs to hold the switch in place: it is a somewhat tight fit, but the switch can be set atop the pegs and slid…

Downloads
319
Likes
21
Rating
5
P
Printableswilliamblake

Seestar s30 pro dust cover

S30 pro arrived. Wanted a dust cover. The S30 one works but does not cover telephoto lens. Modified lifour S30 Dust Cover in Fusion360 to fit better. Works okay. Better in Pla Pro or Petg. Version was updated. Has rounded bottom and more…

Downloads
318
Likes
8
Rating
5
P
Printablesmsobadger

Underware / Multiboard TP-Link Kasa HS300 Smart Power Strip Brackets

Custom brackets for under-desk mounting of the TP-Link Kasa HS300 Smart Power Strip. bsed on the amazing Underware system from @HandsOnKatie_827995. I used Katie's power strip parametric as a starting point, but had to modify the power…

Downloads
316
Likes
50
Rating
0
P
PrintablesInfamy

Iphone12/Iphone12 Pro with Case mount for Mercedes Sprinter (VS30)

This is an iphone12/iphone12 pro with Case mount for a Sprinter 2019+ (VS30). Inspired by another mount but redesigned from scratch to make it easier to print and remade for the iphone12/iphone12pro. Print instructions 15% infill, in PETG…

Downloads
297
Likes
29
Rating
5
P
PrintablesHans

Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source

This is my mini lab bench power supply with a DPS3003 (or compatible DPSs) as main component. It features two modes: powered by battery or powered by an external DC source. This way it is very flexible to use. You'll need: 3 position…

Downloads
294
Likes
116
Rating
5

Futaba S3003 servo mount for 8020 series 10

A mount for a servo on an 8020 series 10 extrusion. Print instructions Unassociated tags: Series 10, servo mount Category: Electronics

Downloads
280
Likes
19
Rating
5
P
Printableskjbturok

Remix PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY WITH USB PORTS

This is a remix of PARKSIDE X20V TEAM RD DPS3005 PORTABLE 100W POWER SUPPLY of the user JAAANIK uploaded to the cult3d web with a couple of usb charging ports added. I leave the link to the original model. All thanks and greetings to the…

Downloads
272
Likes
27
Rating
0
P
PrintablesJocke V

Sculpfun S30 air assist hose and cable holder

Cable and air assist guide that uses the standard bolts. Keeps the air assist hose and the laser cable neatly on top of the aluminum profile. Only tried on Sculpfun S30 but could work on other Sculpfun machines as well.

Downloads
271
Likes
24
Rating
0
P
Printablesmasiakla

Netgear GS305EP 10inch rack mount

Originally model was prepared for GS305EP switch, but considering size of other GS equipment, it should accommodate most of them. Model has tolerances, so switch does not have to be forced into it. End plate requires M2 screws, holes are…

Downloads
266
Likes
22
Rating
5
P
Printablesdrhollen

ZWO Seestar S30 / S50 Equatorial (EQ) Wedge Adapter

UPDATE: I made a new adjustable adapter that I think is better, check it out here: https://www.printables.com/model/1180078-zwo-seestar-s30-s50-equatorial-eq-wedge-adapter-ad This adapter aids in balancing a ZWO Seestar S30 or S50 smart…

Downloads
255
Likes
21
Rating
0
P
PrintablesCodyG

Lexus IS300 Cupholder, reversed

Same as the original, just reversed with the big hole towards the shifter.

Downloads
254
Likes
22
Rating
0
P
Printables7h3 0n3

Polar RS300X Adapter Plate - Updated

As many other users the wristband of my Polar RS300X broke. Therefore I designed this adapter plate so I can mount any 20mm wide wristband to to watch. After cleanly cutting off the rest of the original wristband you can directly mount…

Downloads
253
Likes
3
Rating
0
P
PrintablesFirstGuardian

Netgear GS305 GS308 mountingbracket

Mountingbracket for Netgear switch GS305 or GS308 with a height of 29mm

Downloads
248
Likes
22
Rating
5
P
PrintablesEHY_3dp

Netgear GS308 Series 10-inch Rackmount

Requirements: M4 x 10 screw * 2 M4 Threaded insert * 2 (optional)

Downloads
247
Likes
16
Rating
5
P
Printablesdrhollen

ZWO Seestar S30 / S50 Vixen Dovetail Bars

Vixen dovetail bars for ZWO Seestar S30 and S50 smart telescopes. I made these in both 60mm and 90mm lengths. The 60mm lengths are good for most of the EQ wedge adapters on the market and the 90mm length is good for the William Optics EQ…

Downloads
245
Likes
16
Rating
5
P
Printablesthomasvnl

Netgear GS308 Switch Stacked Wall Mount

Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…

Downloads
234
Likes
25
Rating
5
P
PrintablesWalter Layher

Modular 10 Inch Server Rack - Mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+

These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…

Downloads
229
Likes
25
Rating
0
P
PrintablesScott

DPS3005 (DPS5005) Power Supply Case

I liked the original design by @nrp and the remix by @Nitek (thingiverse) but I also wanted some of the features seen on other versions of the power supply case such as: DC barrel jack input Tilt the front panel up to make the display…

Downloads
225
Likes
38
Rating
0
P
PrintablesJosh

Netgear GS305 10" Rack Mount

10" server rack for Netgear GS305 5 port switch. Pretty simple design, I printed face down using mouse ears.

Downloads
219
Likes
11
Rating
4
P
PrintablesDrjkcy

2003 Lexus ES300 Key Fob Housing.

After (my wife) dropped the key to the 2003 Lexus ES300 one too many times, the key/fob housing broke beyond repair. This is a replacement housing. It turns out that the shape of the main key and the spare key is different at the housing…

Downloads
211
Likes
16
Rating
0
P
PrintablesTomInNrthrnIll

Seestar S30 Powerbank Holder

Seestar S30 Powerbank holder. Holds your powerbank on your S30 for all night sessions. Attaches to the side for easy connection of your USB powerbank. Allows extended imaging sessions even using Dew Heater.

Downloads
209
Likes
6
Rating
5
P
PrintablesBOmaster

Cable Chain for Sculpfun S30 Pro (and S-models)

Cable and Air hose Management for Sculpfun S30 (Pro, Max) and S-models. Cable Chain + Gantry Attachment + Rail Support CABLE CHAIN 30x20 (30x20x40mm and 17x15mm internal) CableChain_3020_Start (1pz) CableChain_3020_Link (As needed for…

Downloads
207
Likes
20
Rating
5
P
PrintablesErwin

Sculpfun S10 to S30 Focus Cylinder Storage / Tray

After repeatedly searching for my focus cylinder all over the place, I had finally had enough. The holder is so precise that you can hear the last bit of air escaping when you insert the cylinder. You just need to use slightly longer…

Downloads
204
Likes
16
Rating
5
P
PrintablesStarwhooper

1liter extra coffeebeans for Siemens EQ.6 plus s300

Add one liter volume for extra coffee beans Category: Kitchen & Dining

Downloads
203
Likes
26
Rating
5
P
Printableshandro

Kasa HS300 Power Strip Mount remix center hole adjustment

Adjusted the hole in the middle as my Kasa HS300 has an extra part of the cable strain relief that protrudes. In the pictures it is 16mm and a very snug fit. In the uploaded 3mf I adjusted it to 17mm to allow for wider variance. 3mf is…

Downloads
202
Likes
16
Rating
0
P
Printablesmariospinaci

Ikea Skadis - Netgear Switch 8 port Unmanaged Gs308

Support to be able to hang Netgear Switch 8 port Unmanaged Gs308 stand. Print height 0.2 also it is recommended to add custom print supports for the hooks behind.

Downloads
198
Likes
13
Rating
5
P
PrintablesRenba

Sculpfun S30 (Pro - Pro Max) Screw improvement kit

Hi A small improvement concerning the adjustment screws of the Z axis of the laser, indeed I find the original screws difficult to handle. Simply snap in the originals screws into the printed parts I have also designed an adjustment screw…

Downloads
197
Likes
19
Rating
0
P

MikroTik CRS305-1G-4S+IN 10-inch Rack Mount

A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…

Downloads
185
Likes
21
Rating
0
P
PrintablesLiam.Kennedy

Side Skirt Clips for is200 is300 Altezza Etc

Replica of the elusive OEM side skirt mounts. Based on some old forum posts and some trial and error. I recommend printing them in Nylon, you might get away with using PETG but wouldn't recommend ABS/ASA due to their brittleness. PLA is…

Downloads
177
Likes
12
Rating
0
P
PrintablesCodyG

Lexus IS300 cupholder - two matching holes

Just like the title says, this time its symmetrical

Downloads
177
Likes
12
Rating
0
P
Printablesfcauwe

Mobile power supply (DPS3005) with black and decker battery (freecad files included)

I needed a powersupply to repair things on the go. The powersupply snaps on a 18/20V Black&Decker battery. I added: A power switch to turn off A XT60 Jack - to connect a D60 soldering iron or to charge something else What do you need: 2…

Downloads
176
Likes
45
Rating
0
P
PrintablesCollingall

SNES30PRO/SFC30PRO Stand

Simple display stand for your 8BITDO SNES30PRO or SFC30PRO controller. Print in the orientation that it will sit on your desk. No supports needed. Mine was printed at 0.2mm layers with 20% infill in ABS on a FlashForge Creator Pro…

Downloads
175
Likes
23
Rating
5
P

MikroTik CRS305-1G-4S+IN 19-inch Modular Rack Mount

A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…

Downloads
172
Likes
14
Rating
0
P
Printablestanmaychhatbar

Low-Poly Lexus IS300

Inspired by Turtleman's collection of Low-Poly vehicles. It uses the same wheel as his models (atleast his Porsche 911)

Downloads
170
Likes
27
Rating
5
P
Printablesandy

Mini Lab Bench Power Supply (DPS3003/DPS3005) Powered by Einhell Batteries (remix)

For a full description and build instructions, please see the original model Mini Lab Bench Power Supply (DPS3003) Powered by Einhell Batteries or DC Source . This remix is intended for stand-alone battery operation without the option for…

Downloads
163
Likes
41
Rating
5
P
Printableszeroflow

DPS3005 Power Supply Case

Remodelled in Fusion360 to make a few slight changes Add XT30 connector Change switch to a model I had at hand Add bottom intake vents to allow for natural convection Uploaded f3d source file for customization of input jacks

Downloads
163
Likes
39
Rating
0
P
PrintablesKamilCadDesign

Lexus IS200 IS300 Cupholder

Lexus IS200 IS300 Cupholder. Fits in the original glove compartment, no gluing required

Downloads
161
Likes
10
Rating
0
P
Printablesallmysparetime

Sensirion SPS30 / Adafruit BME280 Weatherproof Outdoor Enclosure

This enclosure was built to house a Sensirion SPS30 (particulate matter sensor) and an Adafruit BME280 (temperature, humidity and barometric pressure sensor) for an outdoor weather station. The goal was to have an enclosure that could be…

Downloads
161
Likes
9
Rating
0
P
PrintablesSebastian

MikroTik CRS305 80mm snap-on fan mount

Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…

Downloads
159
Likes
27
Rating
5
P
PrintablesJoshed

Mercedes Sprinter Van (VS30) Factory Interior Light Adapters and Housings

I wanted to keep my factor interior lighting from my Mercedes Sprinter Van as I build it out as a camper. I created an adapter to remix into various housings around the vehicle and thought I'd share for others to build their own housings…

Downloads
157
Likes
22
Rating
0
P
PrintablesWillG

Ryobi RTS30 Mitre Bar

I wanted to make a saw sled for my Ryobi RTS30. Since this is a contractor saw, it doesn't use a standard miter slot. I searched the webs and didn't find one for my saw. Using the original Miter Bar as a guide I made this. The saw is full…

Downloads
152
Likes
15
Rating
0
P
PrintablesJára

Cable organiser for LASER sculpfun S30

The printed object can be easily clicked and also easily removed. Manufacturer uses a plastic tape. It is recomended to use small 0.25mm nozzle. Object has fine details. I have tested 0.4mm nozzle and results were not so good. Note…

Downloads
151
Likes
15
Rating
5
P
PrintablesImmaginaecrea

Paraluce magnetico per Seestar S30

Paraluce magnetico per ZWO Seestar S30. necessita di 2 magnetini di diametro 5 mm X 1.5 mm. Con la presenza dei magneti il paraluce rimane stabile anche in caso di vento.

Downloads
148
Likes
7
Rating
0
P
Printableshandro

Kasa HS300 Power Strip Vertical Rack Mount bracket

Rack Mount L Brackets for Kasa HS300 power strip using existing end caps from this model: Kasa HS300 Power Strip Mount by Pantherclawz Best to use my remix here as there are some fitment issues on newer HS300 power strips around the…

Downloads
148
Likes
23
Rating
4.5
P
PrintablesEric T

Depstech DS300 Endoscope Cable Holder

This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…

Downloads
148
Likes
18
Rating
5
P
PrintablesBG

Seestar S30 dew/light shield

Dew/light pollution shield for the Seestar S30. Friction fit.

Downloads
147
Likes
5
Rating
0
P
PrintablesCharly BEGOOD

Netgear GS308 vertical holder

You can fix it with double adhesive face or 2 screws Printer settings : Material : PLA Infill : 20% Support : no

Downloads
146
Likes
19
Rating
4.5
P
PrintablesEugen

Kabelabdeckungen für Sculpfun S30

-Abdeckungen für die beiden Endschalter. -Kabelstaufach Unterteil mit Halterung für Abstandskegel. M5 Gewinde für Innensechskantschraube. -Abdeckung wird am Rahmen Festgeklemmt. Zwei M3 Schrauben mit Mutter und Beilage werden benötigt.…

Downloads
142
Likes
16
Rating
5
P
PrintablesVolker

ESP32 Weather Station (BME280, SPS30)

Remixed the housing from JT https://www.thingiverse.com/thing:2820147 in order to support: ESP32 Feather Huzzah with 2.4" TFT Wing Bosch BME280 sensor Sensirion SPS30 sensor Source code can be found here:…

Downloads
138
Likes
61
Rating
0
P
PrintablesJocke V

Sculpfun S30 drag chain mount

Simple mount that allows you to mount any dragchain with a 16mm hole distance on your Sculpfun S30, uses original bolts. 16mm hole distance center to center 5mm holes for mounting drag chain

Downloads
133
Likes
11
Rating
0
P
PrintablesJP Guitars

Netgear GS308 Under Shelf Mount

I wanted to move my switch off of the shelf to make it easier to access, so I designed an under shelf mount. It prints fine without supports if you print it with the back downwards. I've included CAD files if you want to remix it.

Downloads
133
Likes
13
Rating
5
P
Printablessuprsaw

Mercedes Sprinter Aux Switch Adapter VS30

The VS30 has a deeper panel for the switches and they're not round on all four sides. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C **Rafts:** No Supports: No **Filament Material:** PETG Category: Other

Downloads
132
Likes
13
Rating
0
P
PrintablesJJ Hontebeyrie

Sculptfun S30 Add-ons

FR Quelques accessoires pour la laser SCULPFUN S30 Pro Max de 20w, en particulier des cales de positionnement pour la rendre solidaire d'une table réalisée en MDF et pour permettre la gravure d'une grille de positionnement (les fichiers…

Downloads
132
Likes
10
Rating
5
P
PrintablesStanislav U.

10" rack mount for Netgear GS305E switch (1U)

This mount holds the Netgear GS305E switch in a 10" rack. You have to slightly force the switch into the mount. This is deliberate for the switch to stay in place even when yanking the cables. The switch is mounted assymetrically, I've…

Downloads
129
Likes
13
Rating
0
P
PrintablesDavide Torchia

Seestar S30 / S30 Pro Power Bank Support

Seestar S30 power bank holder designed to keep your power bank securely mounted during long imaging sessions. It attaches to the side of the S30, allowing easy connection of a USB power bank. This enables extended astrophotography…

Downloads
128
Likes
6
Rating
5
P
PrintablesLegufix

Wallmount for NETGEAR GS305 LAN Switch

Since the wall mounts I found with a quick search didn't really appeal to me, I developed my own version. The wall mount consists of 2 parts that are screwed by means of M3 screws and threaded inserts. The switch is tightly enclosed by…

Downloads
127
Likes
14
Rating
0
P
PrintablesBrent

Lenovo Thinkstation S30 5.25'' Bay Cover

A 5.25'' bay cover for use with the Lenovo Thinkstation S30, matched hexagon aesthetic. If, like me, needed to use 5.25 inch bay for something else like a hard drive and don't like the ugly hole left in the front of your PC, or the blank…

Downloads
127
Likes
12
Rating
5
P
PrintablesRoss

MikroTik CRS305-1G-4S+IN Mount

Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…

Downloads
125
Likes
4
Rating
5
P
PrintablesStefan

Absaugtrichter Metabo KGS305M

Das obere Teil wurde aus PLA gedruckt, ggf. wäre hier PETG nicht verkehrt. Das untere Teil kann an das Oberteil angesteckt werden und wurde aus TPU 95a gedruckt. Mein TPU war leider etwas feucht und es wurde zu langsam gedruckt, deshalb…

Downloads
125
Likes
16
Rating
5
P
PrintablestbkMAKER

Sony AS300/FDR-X3000 Cable Saver Case

*(Update: Made lens mount UNIVERSAL, now fits most 52mm lens. 5/12/25 * *(Updated clearance 10/27/24) * The legendary @theRealShooKon3 reached out to me with a problem that needed a solution. His IRL streaming camera kept breaking due to…

Downloads
124
Likes
8
Rating
0
P
Printablesfuzzymakes

NetGear GS308E 10" Mini Rack

Here is a print that will fit diagonally on a Creality K1c. I printed it in PETG This design will mount an 8 port Netgear switch in a 10" mini rack for my raspberry Pi's. There are ventilation holes which also aid in reducing the amount…

Downloads
119
Likes
4
Rating
0
P
PrintablesDex

Milwaukee Power Supply DPS3005

I've created a power supply that's designed to be powered by Milwaukee batteries. This setup allows for a versatile and portable power solution, utilizing the robust and readily available Milwaukee battery system. The power supply…

Downloads
118
Likes
44
Rating
5
P
PrintablesNuggetron

Mini ITX PC Case Feet KXRORS S300 S400

Designed some taller case feet for Mini ITX cases, specifically the KXORS S300 and S400 to help with bottom air intake. Original feet are 10mm tall, so I created 20mm and 30mm variants. The 20mm variant height is approximate. The hole…

Downloads
118
Likes
12
Rating
0
P
PrintablesHL

Kasa HS300 Power Strip Mount

This remix fixes the End piece so screws are more accessible, see original model for Front piece and print instructions.

Downloads
116
Likes
14
Rating
5
P
PrintablesFranz

Netgear Switch Wall-Mount [GS308, S350 Series]

You need: 1 of each of the 4 models 4x M3 heat set inserts 4x short M3 countersunk screws 4x countersunk screws for your preferred wall mount solution Print the outside brackets with the outside on the build plate, so no support is…

Downloads
115
Likes
11
Rating
5
P
PrintablesGabriel Martins

Netgear GS305v3 Rack Mount (10" or 19")

Theres the STL and the Ondsel file, i printed it at 100% and it worked ok, Only change i made after print was add a 1mm fillet on the recepticle to make it stronger but its manly aesthetic. Use a Brim, the side where there is no holes…

Downloads
114
Likes
15
Rating
0
P
Printablespdicko

Rack Mount Bracket for Netgear GS308PP 8-Port Network Switch

This is 19" 1U rack mount bracket for a Netgear 8-port Network Switch (GS308PP). It's pretty beefy because it will be in a portable case and need to stand up to a lot of rough handling. I printed this with PLA on a Bambu Labs A1 Mini, so…

Downloads
112
Likes
18
Rating
5
P
PrintablesPaul Arden

Mini Power Supply (DPS3003 and Laptop Supply)

Case to house a Rui Deng DPS3003 and a Sony Vaio laptop power supply (model 101310-11) which I happened to have on hand. I wanted something without any mains internal wiring. The laptop power brick puts out 19.5V up to 2A so perfect for…

Downloads
112
Likes
25
Rating
0
P
PrintablesgZrQ8yvQHvpw2dd

GS308 Under Shelf Bracket

This bracket can be screwed on the underside of a shelf to hold a network switch. The switch will stand on its feet, and has a gap above to allow cable routing.

Downloads
111
Likes
24
Rating
3.5
P
PrintablesBuffedelic

Prusa silver PSU DPS3005 mod

This case is a remix to accomodate the silver psu from prusa i3 mk3. Hole for 40mm 24v fan, original powerjack and on/off switch. Unsolder the powerpanic board.

Downloads
110
Likes
7
Rating
0
P
PrintablesNick Fajardo

Netgear GS308 Mounting bracket for Leviton SMC

Uses Leviton push pegs to mount in the box, then slide your switch on the pegs. Pegs are 80mm on center, with 6mm posts

Downloads
109
Likes
3
Rating
1
P
PrintablesEsmarra

S300 Mini-ITX Case Mod: Vertical Stand

I wanted a way to have my S300 case in a vertical position, but did not want the cables hanging from the top, so I've designed this model to do just that. You might need a PSU cable with 90deg. If the 90deg is facing the wrong way simply…

Downloads
108
Likes
10
Rating
0
P
PrintablesQuinton Graham

Netgear gs308 Modular rack mount

Beware this is only the right side of the modular rack model. Make sure you know this before printing. Use supports (organic is better)

Downloads
107
Likes
6
Rating
0