Search results: sawstop

Sort order

52 models

P
PrintablesMyers Woodshop

SawStop Table Saw Utility Drawer (left side)

Now that you have the best table saw on the market, the Sawstop PCS or Industrial, why not make it even better? This utility drawer fits into the rail slot on the left side and is a perfect place to hold your pencils, pens, marking tools,…

Downloads
1,357
Likes
147
Rating
4.78
P
PrintablesPNWPrints

SawStop Miter Slot Runners

I needed to make a new crosscut sled and thought I’d print the miter slot runners for my SawStop PCS. My printer’s bed didn’t allow for the length I wanted so I had to print it in multiple parts. I made a long and short version so you can…

Downloads
402
Likes
62
Rating
0
P
PrintablesRobert Bieber

Sawstop Fence Drawer

This is a simple drawer that should fit in the ends of the fence tubing on Sawstop PCS and ICS saws with the T Glide fence. You can just pop the end cap off of the tube and this should fit right in. Pretty much every aspect of this is…

Downloads
362
Likes
43
Rating
4.33
P
PrintablesRoss

SawStop Overarm Divided Wye

An improved adapter for the SawStop PCS overarm dust collector. The one that comes with the overarm has a hard 90 degree takeoff that results in mediocre flow to the overarm and reduces flow to the saw as well. This “Divided Wye” design…

Downloads
348
Likes
49
Rating
5
P
PrintablesSailing Eric

Sawstop Storage Drawer

Small storage bin for use at the end of the table fence locking area. I put a divider in mine but the file does not have a divider since your needs may vary and did not want to box someone in with a too small area. The box is about 61MM…

Downloads
195
Likes
28
Rating
0
P
PrintablesSteven

SawStop fence t-track mounts for compact table saw (CTS)

I wanted to add stock guides to my table saw, and this allows that to happen. so far I feel this is an excellent modification that makes the saw a lot safer. The stock guides have angled wheels to hold the wood to the fence making it much…

Downloads
178
Likes
66
Rating
0
P
PrintablesMatt Beechan

Table Saw Miter Slot Runner (SawStop)

After a couple seasons of expansion and contraction on my hard maple table saw miter runners, I needed a solution that would be consistent season to season. These table saw runners for SawStop miter slots were designed to fit on the MK4S…

Downloads
168
Likes
40
Rating
0
P
Printablespaulengel

Incra TS-LS Fence Alignment for Sawstop

I have to flip my TS/LS fence whenever I move from table saw to router mode. It's not an exact science, so I always square the fence to the miter slot each time I reset the fence for use with the table saw. I have used the Woodpecker…

Downloads
124
Likes
17
Rating
0
P
Printablesex-nerd

SawStop T-Glide Fence Drawer

Yet another drawer for your Sawstop T-Glide fence extrusion. Just pick the best drawer size for your printer, number of dividers, and handle style from the available shapes. There are 3 styles, each with up to 2 dividers: Handle, for easy…

Downloads
121
Likes
15
Rating
0
P
Printablestechfreek

SawStop CTS Shopvac Adapter

I wanted to hook up my sawstop CTS to my shopvac, but the host didn't quite fit. Not sure if this adapter will fit other shop vac hoses, but it works great for my shopvac (1-7/8 hose) I uploaded a version 2. Main change is I aligned the…

Downloads
113
Likes
11
Rating
0
P
PrintablesMT

Sawstop CTS 0 clearance plate

This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…

Downloads
107
Likes
19
Rating
5
P
PrintablesYumanBeing

Tool Logos #10 (Powermatic, Proto, Rikon, SawStop)

Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.

Downloads
106
Likes
25
Rating
5
P
Printablesericsnis

4-inch Coupler for SawStop PCS and Dust Right Quick Connect

This is a coupler for a SawStop Professional (PCS) cabinet saw. It adapts the dust collection outlet on the cabinet to the Rockler Dust Right® 4" Quick Connect since they are not quite the same diameter. I print this as completely solid…

Downloads
104
Likes
17
Rating
0
P
Printablestechfreek

Plywood Attachments for SawStop CTS

When building my new workbench, I wanted to incorporate my CTS Tablesaw, but didn't want to lose the ability to remove it from the bench. So I made some clips similar to those that come on the original stand from the factory. With these,…

Downloads
104
Likes
24
Rating
5
P
Printablesbrio

Dust Port Adapter - Sawstop Table Saw to 50mm Festool Hose

Background I use an old Festool CT-22 vacuum + Oneida Dust Deputy cyclone separator with my Sawstop PCS and it works well ! This lets me avoid having to buy a bulky dust collector and route 4" duct work around my small workshop. I'm sure…

Downloads
85
Likes
18
Rating
5
P
Printablespaul nguyen

Sawstop 4 to 2.25 adapater

Fits the 4" Sawstop dust port to a 2.25" shop vac hose. The actual diameters are: Outer: 3 35/64" or 90.17mm Inner: 3 25/64" or 86.17mm Outer: 2 29/64" or 62.312 Inner: 2 19/64" or 58.312

Downloads
82
Likes
7
Rating
0
P
PrintablesMark Moran

SawStop OverArm DustRight Adapter

The SawStop Overarm Dust Collection comes with a 4" dust Y-port to connect the blade guard's smaller vacuum hose into the saw's main dust collection port. The problem is the design creates very little suction from the blade guard. The…

Downloads
80
Likes
16
Rating
4
P
PrintablesPrateek R

Sawstop Upper Dust Hose Fitting for 2-1/2 Hose

It's a weird setup for sure. I needed a fitting to kick up the hose so that it wasn't hitting the sheet good on the way out if I had the blade lowered fairly low. The hose I'm using here is the Rigid 2-½ inch shopvac hose. It doubles as…

Downloads
79
Likes
15
Rating
0
P
PrintablesDamianG

SawStop Job Site Saw - 4” Dust Port Adapter

Adapter to attach the SawStop Job Site Saw to a 4" Dust Collection Port

Downloads
76
Likes
11
Rating
0
P
Printablesiso42

T Nut for SawStop PCS Table Saw

This fits just right in the miter slot on my SawStop PCS cabinet saw. I use two of them to attach a featherboard. I think PETG is better than PLA for this application, but either should work fine. I designed it for an M6 bolt, but a ¼…

Downloads
64
Likes
8
Rating
0
P
Printables395 Makes

Sawstop Router Tools Storage

Simple place for storing router table tools on a Sawstop router table extension. My router insert is made by Incra and this is designed around those tools.

Downloads
63
Likes
25
Rating
0
P
PrintablesBuilderDadDan

SawStop overarm dust collection plug

This model was built to redirect airflow when the overhead dust arm is not in use. I do a lot of operations where just the riving knife is inserted and wanted to ensure I had the most under table suction as possible.

Downloads
61
Likes
14
Rating
5
P
Printablesphotonours

SawStop Overarm Divided Wye

I recently had the need to add overarm dust collection to my sawstop CNS I decided to go this route : buy the blade guard with dust collection (TSG-DC) because it is a safety element and DIY the rest of the system (tubing, hose…

Downloads
58
Likes
13
Rating
0
P
PrintablesCharles Smith

Sawstop PCS + Dustright 90 degree sweep

A 90 degree sweep for a Sawstop PCS dust port that accepts a Dustright vacuum fitting. It is designed to fit in the bounds of the ICS mobile base (pictured) so that you can fit most outfeed tables tightly up to the mobile base. It is a…

Downloads
57
Likes
11
Rating
0
P
Printablesmikcarthee

SawStop overarm dust collection plug with logo

About to print it but wanted to upload the remix first. Just added the logo to the cap

Downloads
54
Likes
11
Rating
5
P
Printablesriley6683

Sawstop PCS Miter Slot Guide

I created this for a crosscut sled on a Sawstop PCS. You can print as many extension pieces as needed for the length you want to achieve. They print without supports on structure .15 setting, I used PETG for strength. One note, this is a…

Downloads
52
Likes
7
Rating
0
P
Printablesshoooo

Fence-mount t-track for sawstop t-glide table saw (1/4" hole)

Made for drilling and tapping a ¼" tapped hole in a sawstop t-glide track. 3mf provided for remixing. One use (and the reason I made this): vertical featherboard. T-track gets epoxied and (optionally) screwed straight into the mount.

Downloads
52
Likes
17
Rating
0

Sawstop Dust Collection Reducer 3.5" to 2.25"

This is a dust collection port reducer from 3.5" to 2.25" on the professional cabinet saw. Category: Machine Tools

Downloads
46
Likes
2
Rating
0

Sawstop Router Box Dust Port

The Sawstop router box is a beautiful thing. But the dust collection port leaves a lot to be desired. I wanted to be able to use a full sized 4 inch end on the box, and use my overhead hoses for the fence. My workbench setup would not…

Downloads
45
Likes
17
Rating
0

SawStop Over Blade Dust Port

I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…

Downloads
36
Likes
6
Rating
5

SawStop Zero Clearance Insert

Description I based this model on two major sources: an official SawStop Zero Clearance (TSI-SLD) that I already had in my saw, and a model by LXVII for routing inserts , plus spot-checking against a few other sources. There are four…

Downloads
34
Likes
2
Rating
0
P
Printablesphotonours

P-clip for Overarm dust collection - SawStop

I made my own overarm dust collection for my sawstop CNS the stock part for the P-clip is not overly expensive but not cheap either (10.40 USD/pc) (https://www.sawstopstore.com/product/dust-tube-clamp/) But in my case, with using ABS…

Downloads
32
Likes
3
Rating
0
P
PrintablesMark Moran

SawStop Router Fence Dust Cap

The SawStop Inline Router Table comes with a fence that attaches via a 2 ½" dust hose to the main 4" dust port under the table. But when not using the fence, a lot of suction gets wasted, so it is useful to cap the 2 ½" Y-split of the…

Downloads
26
Likes
3
Rating
0
P
PrintablesAndy Adams

CAMLOCK Sawstop JSS Pro Adapter

CAMLOCK adapter to fit my Sawstop JSS Pro.

Downloads
23
Likes
3
Rating
0
P
PrintablesHMW

SawStop miter bar for feather board - 5/16" hardware

The original worked well with 5/16" hardware, but I found that it wasn't very strong when I tightened things down on my SawStop PCS. I increased the height of the upper part of the bar by 2.5 mm since there was ‘unused’ height in the…

Downloads
22
Likes
3
Rating
0
P
PrintablesPitta

Adapter: SawStop Jobsite Pro -> Ryobi 40v Shop Vac

I needed to hook up my table saw with my Ryobi 10gal shop vac. Tested with: Saw: Sawstop Jobsite Pro Vac: Ryobi 10gal wet/dry shop vac (40v) (Yes, I know a shop vac isn't the best - its what I have right now)

Downloads
20
Likes
3
Rating
0
P
PrintablesBrad Howell

Sawstop Router Fence Dust Collection

This adapter fits onto the Sawstop Router fence port and connects to a standard dust collection fitting. I use it to connect to my Rockler hose. Works with my rigid and others. You will find in the images a few examples. Wanted to be able…

Downloads
19
Likes
7
Rating
0
P
PrintablesMark Moran

SawStop Blade Guard Dust Hose Cap

The SawStop Blade Guard includes a 1 ¾" vacuum port, but when not using the Blade Guard (e.g. for narrow cuts), you want to cap that vacuum hose so the suction is not being wasted. This is just a 1 ¾" (46mm) diameter circle extruded 15mm…

Downloads
18
Likes
3
Rating
0
P
PrintablesBryce

SawStop JobSite Saw Pro Miter Runner

I couldn't find a runner specifically for my sawstop, so I made my own. I just used wood screw to attach it to my sled. Its a perfect fit horizontally (maybe a little sanding needed if it doesn't run smooth). The wide part of the bottom…

Downloads
16
Likes
6
Rating
5
P
PrintablesLXVIII

SawStop Zero Clearance Insert Routing Jigs

A jig system for reproducing the SAWSTOP PCS throat plate. The key idea is to use 3D-printed jigs to control the Yand Z axes, while the shape of the router bit defines the X-axis cutting profile, enabling a 3D template-based machining…

Downloads
16
Likes
6
Rating
0
P
PrintablesJames

SawStop Metal Detector Storage

Replacement end cap for the front fence tube, with a 41mm circular opening that fits a pinpoint metal detector. Identical metal detectors are sold under a number of different brands. I have this one:…

Downloads
14
Likes
8
Rating
0

Clock Back for Sawstop 10" Sawblade

I made this so that I could attach a 2.2" clock mechanism to a laser engraved sawblade to make a clock. I don't have a picture of the project, but I will add it here once I get one. Feel free to edit the file to fit your sawblade, I will…

Downloads
14
Likes
1
Rating
0
P
Printablespaulengel

Sawstop Outfeed Table End Caps

This prints great in PLA. I created this because I had somehow lost a couple of the black plastic end caps for my SawStop outfeed table. This would also come in handy if you want to pretty yours up with a splash of color…like Festool green.

Downloads
13
Likes
1
Rating
0
P
PrintablesMKE Gadgets

SawStop Hack, Again @ MKE Gadgets #212

SawStop Hack, Again @ MKE Gadgets #212 In this video, I helped eliminate wasted space in your stop with the use of My 3D Printer. Link to YouTube video You can follow me: Thingiverse https://www.thingiverse.com/mkegadgets/designs Facebook…

Downloads
12
Likes
2
Rating
0
P

Replacement SawStop-Compatible Fence for Craftsman Digital Miter Gauge

After more than thirteen years of owning a SawStop table saw, which includes a safety braking mechanism to prevent injuries, I finally set it off when I ran the metal fence of my Craftsman miter gauge into the blade. The safety mechanism…

Downloads
11
Likes
0
Rating
0
P
PrintablesMT

Sawstop CTS dust collection hood ( 2.5in dust collection port )

While sawstop CTS is a good saw in a lot of category, the dust collection on sawstop CTS is not so great... So I made a dust collection hood that uses the taller riving knife to mount on top of the saw blade. Hook a 2.5in dust collection…

Downloads
11
Likes
4
Rating
0

SawStop OverPort to 2.5 Twist Lock

I really liked my over blade port adapter, and it worked well for me for quite a while. But when I changed out the hose ends across my shop, I needed something that would attach to the new style hose ends. So, this model uses the same…

Downloads
10
Likes
3
Rating
0
P
PrintablesBrettNCUS

SawStop Overhead Dust Collector Tube Cap

I looked over other models already posted, but I saw comments regarding looseness, so I used Fusion and designed a new version for myself, and I figured I would post it in case anyone else wants a copy. It is quite snug, tolerance is in…

Downloads
4
Likes
0
Rating
0
P
Printablesironsidegnr

Sawstop Jobsite Pro Verticle shallow angle jig

Vertical fence for Sawstop Job-site Pro. The jig fits over the fence providing a vertical surface to clamp your item to. Used for making cuts under 45 degrees. I printed this in draft, but increased the strength (Walls and infill)…

Downloads
2
Likes
0
Rating
0
P
Printablesjakeprusa

SawStop CTS fence caddy

This is a push stick caddy for the low fence of the SawStop CTS table saw. I designed it for the Bench Dog brand of push sticks and paddles. It's a very simple extrusion design that could be remixed for other things. All that's needed is…

Downloads
2
Likes
0
Rating
0
P
Printables

Sawstop CTS 0 clearance plate

This is a replacement of the OEM throat plate for the Sawstop CTS. Basically copied the measurement of original saw, connected the split rear end of the OEM design, and made a easier to keep flat zero clearance plate. There are split…

P
Printables

SawStop Over Blade Dust Port

I needed a way to connect the saw blade cover on my sawstop to the dustcollector in my shop. This one provides a smooth transition from the end of the blade cover / OverPort to the 2.5 inch dust collector fitting on my overhead rig. The…