Search results: sh02

Sort order

Counting matching models…

P
Printablesfamichu

Exchangeable desiccant case for the Sovol SH02

This is a desiccant case for the SH02. It can be used with silica gel larger than 1.5mm in diameter. NOTE: Please print it in 0.15mm layer height without supports. Added 1.0mm gap models too(January 20th , 2025)

Downloads
787
Likes
102
Rating
4.87
P
PrintablesSimplifiedLife

Sovol SH02 Feet and Quietness Mod

I was concerned about heat for this Sovol SH02 dryer at the hottest temperature so I made a riser. I kept it open as I wanted airflow underneath. It simply inserts over the existing feet (with decent tolerance so you won't have to worry)…

Downloads
608
Likes
84
Rating
4.92
P
PrintablesMute916

Comgrow/Sovol SH02 Dryer Filament Guide Fix

This is a fix to the sharp angle in the Comgrow/Sovol SH02 Filament Dryer Box. The factory guide would cause excess bends and jams causing failed prints unable to pull form the box. This puts it more of a vertical instead of a parallel…

Downloads
590
Likes
91
Rating
4.89
P
PrintablesAngelo Becerra

SOVOL SH02 Filament Guide

English: It is designed to allow a PTFE tube to be passed through and/or a PC4-M10 coupling to be placed. Printed in SUNLU Black PTEG, on my Elegoo Neptune 3 Pro I share the file in Fusion 360 format in case you want to improve it and…

Downloads
502
Likes
54
Rating
4.4
P
Printablesfamichu

Angled coupling for the Sovol SH02

Please reuse the rubber and nut already attached to the SH02 when installing the replacement .

Downloads
436
Likes
61
Rating
4.9
P
PrintablesAubree Jackal

Comgrow/Sovol SH02 Filament Dryer 40mm Fan mod

If you have a sovol SH02 filament dryer, you know how annoying the fan is. This fever dream of a mod replaces the stock fan with an off the shelf 40mm computer fan and makes the dryer essentially silent. You will need, at minimum; A 40mm…

Downloads
212
Likes
43
Rating
5
P
Printablesinsa-

Sovol SH02 PTFE tube coupler for PC4-M10 fitting

Use the spacer from the original model and the nut from the original coupler. Consensus seems to be that most PC4-M10 fittings are either M10x1 or M10x1.25, so I've included both. Included the CAD file as well in case you need to adjust…

Downloads
206
Likes
17
Rating
4.67
P
PrintablesTommy Zero

PTEF Tube adaptor for SOVOL Filament Dryer SH02

SOVOL Filament Dryer SH02 can be connected directly to PTFE tubing, but it often comes off. However, the OD 4mm Pneumatic Connectors M6 will fit this model just fine, so replacing it with Pneumatic Connectors will prevent this problem. OD…

Downloads
197
Likes
30
Rating
5

Angled coupling for the Sovol SH02 for M6 Bowden fitting

I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…

Downloads
190
Likes
32
Rating
5
P
PrintablesTommy Zero

PTEF Tube adaptor for SOVOL Filament Dryer SH02 Ver.2

SOVOL Filament Dryer SH02 can be connected directly to PTFE tubing, but it often comes off. However, the OD 4mm Pneumatic Connectors M6 will fit this model just fine, so replacing it with Pneumatic Connectors will prevent this problem.…

Downloads
182
Likes
26
Rating
5

Comgrow SH02 / SOVOL 20 Dry Box Shim and Improved Port Placement

The Comgrow SH02 filament dry box is amazing but unless it's kept open a few inches while operating, there is not enough outflow for proper dehumidification. What is FAR WORSE is the placement of the filament ports. This model has 2 ports…

Downloads
156
Likes
20
Rating
5
P
Printables4rd

Silica Gel Dry Box (stackable) - for Sovol SH02 Filament Dryer

>> Use case These boxes are to be used in stack in the filament dryer box Sovol SH02. They are to archieve regenerated silica gel in this dryer. So you can prevent being forced to use your kitchen gadgets, e. g. microwave or oven, where…

Downloads
153
Likes
19
Rating
0
P
PrintablesSphaeroX

Sovol SH02 Silica Gel

The filament dryer is really great. Unfortunately, the silica gel inside the container is quite limited, so I designed an additional vertical unit for extra capacity. Please make sure to use a suitable material that won’t melt when the…

Downloads
129
Likes
25
Rating
0
P
PrintablesAlex_lu

SOVOL SH02 Angle filament guide

I tried the following two models which broke: https://www.printables.com/model/1004485-angled-coupling-for-the-sovol-sh02 https://www.printables.com/model/986869-sovol-sh02-filament-guide donc j'ai décidé de fair un mix plus résistant

Downloads
110
Likes
13
Rating
0
P
PrintablesErik Schmitt

Sovol SH02 Fan dampener

The main issue with the SH02 is the bad fan noise. With these 2 TPU brackets and 2 m3x4mm screws or similar you can significantly reduce the noise of this great filament dryer! Print settings: 1 wall, 15% gyroid infill, 2 top layers, 2…

Downloads
110
Likes
25
Rating
5
P
PrintablesBig B

Raised feet for Sovol SH02

I increased model thickness after I printed it. Just put the dryer on to the riser and that's it. I didn't want to unscrew anything from the bottom or modify in any other way so it does not attach to dryer. (snaps on so it holds a little.…

Downloads
99
Likes
9
Rating
0
P
Printableszogthegreat

Sovol SH02 fan mod

This is a mount for a 40mm fan for the Sovol SH02 filament dryer. The stock fan is really noisy and irritating. I used a Noctua NF-A4x20 for this mod, but any three wire 40mm fan will work. You must use a 3 wire fan with PMW/FLX or the…

Downloads
97
Likes
13
Rating
5
P
Printablesrxiagorxiervjf

Desiccant dryer box for SOVOL SH02

A pair of these can be printed and placed side-by-side. If the lid is held by hand, you can just shake the box to mix things inside. Shift it a little, and the opening can be used to return the beads to the storage can without spilling…

Downloads
80
Likes
17
Rating
3
P
PrintablesBig B

Sovol SH02 coupler with PC04-M10 pneumatic fitting

EDIT/UPDATE: one PETG coupler broke after couple of months so I decided to print one in TPU and it works even better (I will update if TPU will not be able to handle the heat). So recommended filament for this project is TPU. I printed…

Downloads
65
Likes
6
Rating
0
P
Printablestorch

Sovol SH02 Modifications

The Sovol SH02 is a vast improvement over the original SH01. It has better internal airflow, a one-handed latch, higher internal temperature, lower external temperature, longer duration, desiccant trays and an internal power supply. But…

Downloads
53
Likes
44
Rating
5
P
PrintablesGiles Santen

Y-Splitter for SOVEL SH02 Filliment dryer

This is Remix of Ed Johnson's PTFE filament y-splitter to be mounted ontop of a SOVEL SH02 filament dryer with double sided tape.

Downloads
50
Likes
10
Rating
5
P
PrintablesSamVal

Sovol/Comgrow SH02 Filament Dryer Enhancement Suite

The Sovol / Comgrow SH02 filament dryer has been deservedly criticised for inadequate venting and noise. I have attempted to improve both. The design shown should be self explanatory but don't attempt it unless you are prepared to drill…

Downloads
47
Likes
7
Rating
0
P
PrintablesCats

SH02 40mm fan mod better mesh

Fixed the weird issues with the mesh

Downloads
45
Likes
7
Rating
0
P
Printablesjlodge

Sovol SH02 Removable Desiccant Trays

A simple desiccant tray to easily remove and replace/replenish desiccant larger than 1mm for the Sovol SH02 filament dryer that prints in under 45 mins. Designed to be printed in ASA with a 0.4mm or 0.6mm nozzle

Downloads
42
Likes
3
Rating
0
P
PrintablesAndrei Shuiski

Sovol SH02 fan mod slightly modified model

This is a mount for a 40mm fan for the Sovol SH02 filament dryer. The stock fan is really noisy and irritating. I used a 4020 fam from Aliexpress with 6500 pwm for this mod, but any three wire 40mm fan will work. You must use a 3 wire fan…

Downloads
39
Likes
6
Rating
5
P
Printablesnekreg9

Exchangeable desiccant case for the Sovol SH02 - Solid sides

I made the bottom and sides solid instead of vented. Used the original lid

Downloads
37
Likes
1
Rating
0
P
PrintablesSteve

SH02 Filament Dryer Guide v2

V2 of https://www.printables.com/model/1278983-filament-dryer-guide. This worked reasonably but had some friction and the angles needed complicated things. This is definitely a lower friction option. Also easier to install using the…

Downloads
30
Likes
3
Rating
0
P
Printableswanderyr

Flexible plug for Sovol SH02

This is a the flexible plug used on the Sovol SH02 filament dryers. It needs to be printed in TPU - a rigid plug won't work!

Downloads
29
Likes
2
Rating
0
P
PrintablesEric

M8 Nut for Comgrow SH02

Lost the nut for the filament feed out of the dryer. I tried other supposed M8 models but none worked. So I made my own. Printed in PETG at 0.1 mm layer height and 100% infill. Included the FreeCAD design file. The important adjustment is…

Downloads
28
Likes
2
Rating
0
P
Printableslainsnavi

Sovol SH02 Dual Bearing Filament Guide

I really liked the concept of the original model, but the filament ended up jamming against the retainer as the extruder raised upward on my Ender-3. To resolve this, I added another bearing so it rolls against the upper one for taller…

Downloads
25
Likes
8
Rating
0
P
PrintablesBig B

Sovol SH02 filament dryer fan swap

UPDATE!!! Improved the design. Prints without supports now. Reoriented the model for easy printing. Aligned all holes. Chamfered the air intake and reinforced the model. The fan sits a lot better inside the bracket now. IMPORTANT: To…

Downloads
23
Likes
6
Rating
5
P
PrintablesDr_Horrible

Sovol SH02 PTFE Tube Redirect

I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…

Downloads
22
Likes
3
Rating
0
P
PrintablesPM838

Sovol SH02 mod - 3kg spool adapter

Decided that I could fit a 3kg spool in the Sovol SH02 and I was right. Super simple mod, no permanent modification. You only have to remove the two knurled pins on the back of the cover and that's it. There is no lock, pin, or any…

Downloads
20
Likes
5
Rating
0
P
Printableszogthegreat

Sovol SH02 filament dryer face cover

The Sovol SH02 is a nice filament dryer, however, it has a annoying LCD display that lights up a room at night. This is a simple cover that slides on and off of the dryer, blocking the light. I printed this in PETG, but PLA and any other…

Downloads
19
Likes
4
Rating
0
P
PrintablesS Case

Sovol SH02 PTFE Adapter

A little adapter I came up with to maybe make the path the filament travel through the lid more in line. Maybe it will help keep the filament from catching, and keeps the ptfe tubing from pulling out. It uses the nuts and the cap plugs…

Downloads
18
Likes
2
Rating
0
P
Printables2DHypercube

Desiccant dehydrator mod for Sovol SH02

This insert is what I came up with when I didn't want to buy a food dehydrator and looked at my Sovol SH02 filament dryer. This converts the SH02 into a desiccant/food dehydrator. Instructions: Print 1 base plate and 4 pegs for each upper…

Downloads
17
Likes
3
Rating
5
P
PrintablesSumofThis

90 Degree Hygrometer Mount for Comgrow Sovol SH02

I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…

Downloads
11
Likes
1
Rating
0
P
PrintablesBricol'3D

Pneufit pour CROMGROW SH02

Bonjour, la sortie de filament du SH02 n'est pas optimum pour utiliser des bobines de 1KGBonjour, la sortie de filament du SH02 n'est pas optimum pour utiliser des bobines de 1KG, j'ai donc dessiné et imprimé deux pièces pour fixer des…

Downloads
10
Likes
2
Rating
0
P
Printablescalcifer

ECAS04 Y-Splitter for Sovol SH02 Filament Dryer

Y-Splitter for Sovol SH02 with ECAS04 Fittings This is a remix of the PC4-M10 version. I measured the fittings precisely with a caliper and sized the holes accordingly. You should be able to insert the fittings easily and get a tight fit.…

Downloads
10
Likes
2
Rating
0
P
PrintablesDennis Pracht

Sovol SH02 filament route mod

Met deze mod kan je het filament door de bodem laten lopen ipv via boven. Hierdoor kan je je SH02 op de printer zetten. Hierdoor maak je de afstand van droger naar de extruder korter. Door de mod te doen zorg je ervoor dat het filament…

Downloads
0
Likes
0
Rating
0
P
Printables

Angled coupling for the Sovol SH02 for M6 Bowden fitting

I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…

P
Printables

Sovol SH02 Fan dampener

The main issue with the SH02 is the bad fan noise. With these 2 TPU brackets and 2 m3x4mm screws or similar you can significantly reduce the noise of this great filament dryer! Print settings: 1 wall, 15% gyroid infill, 2 top layers, 2…

P
Printables

SH02 Filament Dryer Guide v2

V2 of https://www.printables.com/model/1278983-filament-dryer-guide. This worked reasonably but had some friction and the angles needed complicated things. This is definitely a lower friction option. Also easier to install using the…

P
Printables

90 Degree Hygrometer Mount for Comgrow Sovol SH02

I only use my Comgrow for one dedicated filament at a time. It is on a riser in the back of my setup and I needed a 90 degree angle mount to see the readings so I created this. I tried several threaded designs but ended up just going back…

P
Printables

Y-Splitter for SOVEL SH02 Filliment dryer

This is Remix of Ed Johnson's PTFE filament y-splitter to be mounted ontop of a SOVEL SH02 filament dryer with double sided tape.

P
Printables

Sovol SH02 PTFE Tube Redirect

I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…

P
Printables

Exchangeable desiccant case for the Sovol SH02 - Solid sides

I made the bottom and sides solid instead of vented. Used the original lid