Search results: she

Sort order

26,502 models

P
PrintablesTom

Topology optimized shelf bracket - holds over 80kg each

Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…

Print approx. €13.31–€16.27 excl. taxPreliminary estimate for one variant

Downloads
16,512
Likes
4,050
Rating
4.93
P
PrintablesRyan Millar

Display Shelf Wall Assembly (No Supports Needed)

These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…

Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant

Downloads
10,551
Likes
4,380
Rating
4.95
P
PrintablesMikolas Zuza

Smoothed topology optimized shelf bracket - Flat & thicker back, smoothed body

I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…

Print approx. €7.17–€8.76 excl. taxPreliminary estimate for one variant

Downloads
5,195
Likes
1,351
Rating
4.94
P
PrintablesKashimi

ENDLESS customizable, interchangeable shelf

This is a fully customizable modular cube that is wall mounted, you can print any number of module and interconnect each other to create anything you want. With it's many differents modules you can change plates to suit your needs, from…

Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant

Downloads
5,061
Likes
3,456
Rating
5
P
PrintablesMaciej I

Face shield - A4 binding sheet - easy punching

The remake of Puse RC1 and RC2 face shield. RC3 is mix of RC1 and RC2, it has extra space for glasses/goggles and better side protection. If you are printing it for someone else, please wash hands very well and carry mask/shield when…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant

Downloads
3,643
Likes
10
Rating
4.93
P
PrintablesPeter Farell

Bowswer Spikey Shell

Bowser Spikey Shell. Updated: 1/1/2024: Also removed piggy bank version. May or may not put up a new piggy bank version.

Print approx. €9.29–€11.35 excl. taxPreliminary estimate for one variant

Downloads
3,305
Likes
1,274
Rating
4.62
P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…

Print approx. €10.90–€13.32 excl. taxPreliminary estimate for one variant

Downloads
3,004
Likes
816
Rating
5
P
PrintablesJer

Dishwasher clean/dirty indicator

I wasn't satisfied with any of the models I found for clean/dirty dishwasher indicators, so I decided to practice some modeling and make my own. My wife hates the feel and sound of 3d print material sliding together, so I used a…

Print approx. €1.64–€2.01 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,453
Likes
880
Rating
4.61
P
PrintablesTeteomat

Pistachio Bowl | Snack Container with Shell Holder | Modern Design - Contenitore Pistacchi 2 in 1 | Snack Bowl con Porta Gusci | Design Moderno

Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…

Print approx. €3.56–€4.36 excl. taxPreliminary estimate for one variant

Downloads
2,333
Likes
606
Rating
4.84
P
PrintablesJKM

Corner shelf for thr bathroom

2024-01-23 update nová verze poličky - dno s motivem Voronoi + výška dna zvýšena __________________________________ Bylo nutné nahradit původní poličky a ve zdi zůstali hmoždinky, využilo se původního umístění šroubů (nejsou symetrické)…

Print approx. €13.77–€16.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,990
Likes
74
Rating
5
P
PrintablesBlue Hazel

Natural Seashell Model

The seashell model was made out of a 3D Scan. Printing: The seashell model was printed upright with support to have a higher resolution on the surface.

Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant

Downloads
1,903
Likes
63
Rating
5
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,582
Likes
482
Rating
4.8
P
Printablespjvenda

Shelly box inline and wago 221 connectors (1Plus, 1L, 2PM, 2.5, Dimmer2)

Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors (this one) Shelly box for 2x flex wires…

Print approx. €3.55–€4.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,531
Likes
215
Rating
5
P
PrintablesDJ

Lidl Dishwasher tablet dispenser

Based on the great model by @ KaliM. UPDATED VERSION v3 on December 1st 2024. Changes : Walls are thicker (3 layers) Vertical hole at the front is bigger: easier to guide tablets going in Hole to retrieve tablets is bigger (vertically &…

Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant

Downloads
1,474
Likes
493
Rating
5

DESTINY GENERALIST GHOST SHELL FULLY DETAILED 1:1 SCALE

This model it's FREE and part of the upcoming releases as part of a fan made project to create every Ghost from the game as collectibles, please support this project, all this is for purchase filament to keep testing the upcoming updates,…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,388
Likes
351
Rating
4.33
P
Printablesredangel1984

Customizable Box For Screws/Nuts/Washers etc.

If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant

Downloads
1,376
Likes
145
Rating
4.88
P
PrintablesIvan Urbánek

Skadis shelf for hanging modular drawers

Shelf for Ikea Skadis board capable of hanging modular drawers underneath. Several shelves can be put into a single continuous row and the T rails are compatible with Modular drawer system by LR3DUK . Comes in versions of 80,160 and 240mm…

Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant

Downloads
1,350
Likes
635
Rating
4.92
P
PrintablesAllpa

Elf on the Shelf - Mini-Cookie-Cutter Set // Weihnachts-Wichtel - Mini-Keksausstecher-Set

Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
1,285
Likes
250
Rating
5
P
PrintablesDaniel Frank

12 Gauge Shotgun Shell Container

Container for small stuff (BB balls, toothpicks, etc.) in style of 12 gauge shotgun shell inspired with look of original Doom game. Preferably print the top part in red and bottom in gold (brass). Thread might go little tough at first but…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
1,285
Likes
142
Rating
5
P
PrintablesHedo3D

shaun the sheep V2 - new face - toilet roll - easy print

shaun the sheep toilet paper roll stand this is a complete new head design, print in 2 parts für quick and easy printing without support, legs print in vase mode the eyes print with color change at layer height 4,4mm glue the head parts…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
1,242
Likes
317
Rating
4.77
P
PrintablesLYOTRADE

DeWALT / Makita drill gun shelf hanger holder

Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…

Print approx. €19.63–€23.99 excl. taxPreliminary estimate for one variant

Downloads
1,216
Likes
215
Rating
4.92
P
PrintablesFrasse16

Bathroom corner shelf - No drilling

This is a simple and easy to mount shelf for the corner of your shower. It is mounted with double sided tape and is big enough for 5-6 normal sized bottles. The design is sleek, simple and has a feeling that it is floating. There are…

Print approx. €7.63–€9.33 excl. taxPreliminary estimate for one variant

Downloads
1,082
Likes
395
Rating
4.94
P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…

Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant

Downloads
988
Likes
373
Rating
0
P
PrintablesRichardW

Ridged Sea Shelly

This isn't a scan, it's a symmetrically beautiful 3D sea shell created from scratch in Fusion 360. It has a number of detailed ridges, has a hollow interior which prints without supports and is great for seeing how smooth your printer…

Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant

Downloads
986
Likes
88
Rating
5
P
PrintablesAllpa

Honeycomb-Shelf for Toniebox / Waben-Regal für Toniebox

Matching wall shelf for the Toniebox for my Tonie honeycombs: https://www.printables.com/de/model/355564-shelf-for-tonie-figures-regal-fur-tonie-figuren-to The honeycomb shelf is invisibly attached to the wall with the base plate. The…

Print approx. €4.88–€5.97 excl. taxPreliminary estimate for one variant

Downloads
949
Likes
114
Rating
4.85
P
PrintablesStrankler

Shelly Mini DIN-rail holder

As @FragileCobra_1676165 Shelly plus DIN-rail holders has no version for a Shelly mini, I made a remix of his model to have one. On the bottom are two openings. (1) is to access the Reset Button of the Shelly mimi, (2) is designed to…

Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
923
Likes
65
Rating
5
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
854
Likes
78
Rating
4.78
P
PrintablesHD_Creator

Folding propeller for pusher and tractor planes

Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
838
Likes
103
Rating
5
P
PrintablesNautilus Forge

Modular filament spool rack - reversible shelf bracket

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant

Downloads
802
Likes
135
Rating
4.8
P
Printablesmodsmthng

Floating book shelf / invisible bookshelf / magic bookshelf / floating books shelfs

In the pictures I only used one shelf (base) for each book stack. Correct print orientation is crucial for stability, more below. My Girlfriend needs a new bookshelf every month and she wanted to try an invisible one, so I over-engineered…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
746
Likes
328
Rating
5

Intermediate level for shelfs

You can see in the pictures how to set it up. I used used seven 3,0mm x 16mm wood screws. The G-Code is made for Filamentum PLA. If you want to slice it yourself, make sure to set “Loops” at the “Skirt” settings to 0. The print needs the…

Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant

Downloads
654
Likes
619
Rating
4.67
P
PrintablesMiniWorld3D

Rock of Cashel - Ireland

🇮🇪 Fáilte go hÉirinn! ☘ Welcome to Ireland! This model was created by Dany Sánchez . The Rock of Cashel (Irish: Carraig Phádraig ), also known as Cashel of the Kings and St. Patrick's Rock , is a historical site located at Cashel, County…

Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant

Downloads
638
Likes
101
Rating
5
P
PrintablesMolitoris

FIFO Can Shelf

The model consists of - 1x left wall - 1x right wall - 3x connecting rods Dimensions can height: 110 mm - 115 mm diameter: 74mm Printing information - Printed in PLA - No supports are needed. - The left and right walls fill the entire…

Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant

Downloads
598
Likes
134
Rating
4.67
P
PrintablesFC2M3D

Cute Sheep Keychain

Easy to make a cute Sheep keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
573
Likes
78
Rating
5
P
PrintablesMilanT

Monitor shelf / Polička na monitor

EN: The model consists of 4 printed parts, its own shelf (for a better result, it is printed in two parts that are then glued together), a support leg and tightening nuts (into which a screw and a size 10 nut are inserted). I personally…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant

Downloads
549
Likes
173
Rating
4.75
P
Printableswc23

Seedling Shells

Benefits Deep, consistent root growth The ribbed sides and taper encourage downward and perpendicular root structure instead of balling or clumping. An open bottom air-prunes roots to further avoid balling or clumping. Separating…

Print approx. €11.89–€14.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
546
Likes
143
Rating
4.57
P
PrintablesGeorge

Logitech MX Master 3 Full Fuzzy Skin - Shell & Buttons

This remix brings a consistent, high-quality texture to your Logitech MX Master 3 / 3S . I modified the model to allow Fuzzy Skin on the external surface of the buttons as well as the shell. This ensures a uniform look and significantly…

Print approx. €5.22–€6.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
524
Likes
166
Rating
5
P
PrintablesScotthon

Ubiquiti Unifi G3 Instant Camera Desk or Shelf Stand

The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…

Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant

Downloads
520
Likes
64
Rating
5
P
Printablesdubmehard

German shepherd seated dog figure

Hello, seated German Shepherd figure. Thanks for your download, enjoy the print!

Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant

Downloads
504
Likes
40
Rating
4.67
P
PrintablesFH

Shelly Housing (1-/1PM-/PM-Mini)

Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
489
Likes
87
Rating
5
P
PrintablesMany24

Monitor stand / Desk shelf

There was no monitor stand that would match to what i wanted so I designed it myself. It's very simple yet modern design. Prints quickly and can hold quite a lot of weight. I tested it with approx. 5kg monitor with zero issues. It can be…

Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant

Downloads
478
Likes
147
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Flat Wall-mounted

Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…

Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant

Downloads
429
Likes
142
Rating
5

Shelf hook for IKEA Billy bookcase

Also fits at least older IKEA desks with table tops of the same thickness (~19mm) Added a blunt version of the hook that prints without supports. Works fine with clothes hangers.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
427
Likes
91
Rating
5
P
Printablesdhiertz

shelf pin

this shelf pin is quick to print and good for left over filament. you need less than 0,5meters and less <15min to print 5 perimeter 5 top and 4 bottom layers test it with PLA and PETG, both works fine.

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
410
Likes
78
Rating
4.75
P
PrintablesRobert

Bookshelf speaker stand (Edifier)

Speaker stand for the Edifier R1280DB. There is enough room around all edges to easiy modify for different speakers. See the attached pictures for the dimensions. This will give the speaker a +- 13 degree angle.

Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant

Downloads
408
Likes
52
Rating
5
P
PrintablesNicuradse

Regalwinkel / Angle Bracket for Shelf

Metal rods for board in cabinet wern´t enough to support weight. So I designed some brackets with to holes to screw them in place. When I uploade the model I realized there were already some similar models so I added this my model as a…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
403
Likes
38
Rating
4.67
P

Easter Bunny, Sheep and Chicken

Inspired by 10 Easter Egg Bunny Crochet Patterns Free & Paid - DIY Magazine (fabartdiy.org) Use supports 3MF contains multiple parts, you can edit Slicer separately STL is one part 🆕 added variants with a plate on the bottom side (base) 🔧…

Print approx. €2.41–€2.95 excl. taxPreliminary estimate for one variant

Downloads
399
Likes
86
Rating
5
P
PrintablesCelta

Wobble-Free Shelf Brackets

Brought home a bargain shelf, only to find it's a bit wobbly? Don't fret! These 3D-printed brackets are your wobble-busting heroes! This design features both left and right brackets , each securing the shelf with 4 screws (2 vertical, 2…

Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant

Downloads
389
Likes
309
Rating
0
P
PrintablesTurbopstros

IKEA SKADIS Shelf with Honeycomb Pattern

IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
385
Likes
50
Rating
5
P
Printablesmacro

Prusa CORE One Print Sheet Holder - more magnet choices

Inspiration I didn't have enough 6x3 magnets for @matthew__172848's Magnetic Print Sheet Holder , so I remixed it with different sizes and fewer holes. Please see the description of the original model for more detail. Enjoy! By default, 8…

Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant

Downloads
374
Likes
68
Rating
4.92
P
Printablesdjedje_zr7

Twin Slot Shelving Bracket

Addon for twin slot shelving sracket to hold what you want (hover part,bags,...) Print the base and the required module : fork, unicor or triceratops.

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
344
Likes
75
Rating
5
P
PrintablesKevin Barker

Interior Storage Shelf for Original Prusa Enclosure

I noticed that there is actually a lot of unused space inside the Original Prusa enclosure, and I can always use more storage space in my small printing room. This shelf mounts behind the printer and adds a substantial amount of storage.…

Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
343
Likes
292
Rating
5
P
Printablessmash14

Shelly H&T outdoor encolsure

Enclosure for the Shelly Humidity & Temperature sensor. Use it to have a more wather proof Shelly outside your apartment. Print the two halfs (bottom and top), put your Shelly inside the bottom half and screw the top half on top of it.…

Print approx. €4.66–€5.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
341
Likes
36
Rating
5
P
Printablesiron_harrier

Massironi Shelf

30CM diameter Massironi Shelf Seems to print best when pieces are upright (laying piece down saves time if you want to experiment). I pieced my shelf together with out having to shave down any plastic and it should fit snuggly together. I…

Print approx. €9.39–€11.47 excl. taxPreliminary estimate for one variant

Downloads
337
Likes
171
Rating
0
P
PrintablesRetalia

Stencil for Music Sheet

You just had an unexpected inspiration of an extraordinary music composition but you musical staff paper ran out! No worries. This small stencil , a pen , a ruler and a piece of paper makes drawing your own a breeze. Printing: Print with…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
335
Likes
135
Rating
4.4
P
PrintablesDom Cis

Little JOSEF PRUSA character riding a SHEEP - Multi Material

Little Josef Prusa Character riding a SHEEP, designed at the occasion of the Original Prusa MULTI MATERIAL UPGRADE 2.0 release. The model consists of 5-parts - prepared for 5-color print. Printed with MK3 & MMU 2.0 Read more about MMU 2.0…

Print approx. €25.19–€30.79 excl. taxPreliminary estimate for one variant

Downloads
333
Likes
52
Rating
5
P
PrintablesF3DX

EAWONGEE 4000 high pressure washer gun

Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
333
Likes
64
Rating
5
P
PrintablesmoWerk

Rugged Shotgun Shell Capsule with TPU gasket

Protect fragile things with style during outdoor activities. Mounts using 4mm zip ties or any cord / string. Water tight seal printed from TPU / Flex. Two sizes available 4cm diameter 3cm diameter Print advise: Print the capsule with rim…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant

Downloads
329
Likes
172
Rating
0
P
PrintablesMrViddy

Benchy Shelf Display Rack Holder

Push and twist right in place. Sits firm in place for no wiggle or movement. Holds in from the 9mm hole in the back of the Benchy. Holds 7-3 Benchys Screw/Tape option (4mm Screw Hole) 20%infill No supports STEPS: Rotate Benchy to the…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
327
Likes
84
Rating
4.25
P
PrintablesNautilus Forge

Shelly 1PM PLUS case - no insert

⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
321
Likes
17
Rating
5
P
PrintablesReismann

Shelly 1 / 1PM - Power Cord Housing

Within this box fits a Shelly 1 or 1PM and two WAGO 221 connection clamps for easy cable connection. Cables are secured by two printed cable clamps. I used threaded inserts from ruthex in size M3 for the screws. Update 12/07/2022: added…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
320
Likes
52
Rating
4.78
P
Printablesmrplyuh

Полка для зубных щеток и тюбиков пасты. (shelf for toothbrushes and tubes of paste)

При нормально настроенном принтере модель печатается без поддержек

Print approx. €10.70–€13.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
316
Likes
34
Rating
0
P
PrintablesRobC

Pruning shears holder for Ryobi Link

Organize your pruning shears using the Ryobi Link storage system. Print recommendations: Layer Height: 0.30mm Supports: None Infill: 0% Perimeters: 3 Filament: OVERTURE Grass Green PETG.

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
316
Likes
72
Rating
5
P
PrintablesSilverBullet126

Axial Ryft RBX10 - Full Clamshell Roof

By popular request (this time many people), I've created a full cover roof for the Axial Ryft RBX10. You'll need 7 - 2.5 x 100mm zip ties; I'd print this in PETG or Nylon for maximum strength; though really PLA will maybe hold up. For…

Print approx. €7.57–€9.25 excl. taxPreliminary estimate for one variant

Downloads
281
Likes
7
Rating
5
P
PrintablesDD3D

[PRUSA] BOX Enclosure Expandable Steel Sheet Holder

This is the Expandable Steel Sheet Holder remix for the Prusa Box enclosure. I have tested the version for the modular display for the Prusa Box (see pictures) but I haven’t tested the version for the stock Prusa Box (that’s why i have…

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
277
Likes
77
Rating
4.88
P
PrintablesMeganoodle

Desk/Shelf cable hook

No supports necessary easy print. 15mm 18mm and 20mm. Some shelves I found to be lose I just placed a tiny bit of blue tac to hold it in place.

Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant

Downloads
271
Likes
85
Rating
5
P
PrintablesTmpx64

MacBook Charger Cable Protector / sheath / spiral / sleeve

Inspired by Majed's iPhone Charge Cable Protector design, this adapted to work with MacBook charging cables. I recommend to print vertically with brim for good bed adhesion. Even though this may seem like a simple model, it still takes…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
46
Rating
4.5
P
PrintablesPanJaster

Fujara (Slovak folk shepherd's flute)

Fujara, traditional slovak shepard's flute you can print and assemble. Pipe itself is cut to 11 parts and you will need 8 single and 2 double joints to assemble it. I recommend gluing it together or sealing joint/pipe area - I used click…

Print approx. €8.80–€10.76 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
37
Rating
0
P
PrintablesMobilePigeon862

Shotgun Shell Maze

I had so much fun creating my Egyptian Obelisk Labyrinth Puzzle that I decided to create another one. This time it's a maze puzzle box in the form of a standard 12 gauge shotgun shell. My settings for the print shown: Shell Cap PLA:…

Print approx. €2.58–€3.16 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
48
Rating
4.71
P
PrintablesKirk.D

Windshield Washer Fluid Cap

This is a replacement windshield washer fluid cap for a 2010 Land Rover LR2 (I haven't tested others but I expect it may fit other models). While filling up the windshield washer fluid one day, the cap popped off and was lost. No problem,…

Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant

Downloads
263
Likes
22
Rating
4.67
P
Printablespjvenda

Shelly box for 2 flex wires and wago 221 connectors (1Plus, 1L, 2PM, 2.5, Dimmer2)

Part of my series of enclosures designed for Shelly smart devices and Wago 221 connectors. Shelly box for T&E 3x slots and wago 221 connectors Shelly box for inline flex wire and Wago 221 connectors Shelly box for 2x flex wires and wago…

Print approx. €3.30–€4.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
263
Likes
26
Rating
5
P
PrintablesMehTechArt

Mustang Shelby GT500 Wall-mounted

Please click if you appreciate my work :) Raw power. American legend. The Shelby GT500 on your wall. This 3D printable wall-mounted model of the Ford Mustang Shelby GT500 captures the essence of muscle car performance – long hood,…

Print approx. €11.17–€13.66 excl. taxPreliminary estimate for one variant

Downloads
261
Likes
94
Rating
0
P
PrintablesL21Degrees

Keyboard MegaShelf, sliding keyboard and peripheral shelf/tray

Hi! This submission is the result of my need to free desk space and lower the keyboard height as the desk is too tall for me. I spent over an hour looking for sliding keyboard trays and none met my needs/wants. Features: Big enough to…

Print approx. €32.17–€39.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
260
Likes
144
Rating
0
P

Dollhouse Double-Hung Window, 3' x 4', Scale 1:12, Movable Sashes

You can print sashes that provide 1 over 1 or 4 over 1 dollhouse windows. The flat springs on the sides of the sashes keep them in place after movement. I successfully printed everything without support. Install each sash by placing one…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
259
Likes
82
Rating
0
P
PrintablesKaktus22

Shelf car spoiler

Model for Prusa Mini

Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
257
Likes
42
Rating
0
P
PrintablesPeter Farell

Cartoon Sheep

Cartoon Sheep

Print approx. €2.98–€3.64 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
62
Rating
5
P
PrintablesRPK

Mini photo booth rod for A4 sheet

EN: if you dont have a rod at home for the gadget- print one! Exact size for A4-sheets. Material: PLA Layers: 0.3 Supports: no see also https://www.printables.com/de/model/834685-mini-photo-booth-rod-for-a3-sheet…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
23
Rating
5
P
PrintablesZbyněk Král

Brushes Box

Two simple boxes to protect your brushes. The internal space for your brushes is 235 mm. You can edit the models at the links below, on my OnShape. STEP files are also available. Happy printing! OnShape Links: Oval Box Triangular box…

Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant

Downloads
249
Likes
46
Rating
0
P
PrintablesDom Cis

HEXAGONAL MODULAR SHELF / STRUCTURE FOR PRUSA RESEARCH MAKER FAIRE PRAGUE BOOTH

Printed CORNERS for the hexagonal shelf we had on Prague Maker Fair 2018. We used it to display printed models. 10x10x160mm Aluminium sticks are used for prisms. Prisms are secured by hot glue sticks (of course, what else...). All the…

Print approx. €12.18–€14.89 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
243
Likes
89
Rating
0
P
PrintablesBob the Builder

LEGO Brick 4 shelf (5x original size)

The Lego brick shelf for kids room decoration is honestly just a copied version of Lego's original set of 4114 shelves (that is 10x scale). I made this to be able to print it and let you decor your kid's room for less price than buying…

Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
50
Rating
5
P
PrintablesJ

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
240
Likes
57
Rating
5
P
PrintablesFifthbear

HSW bearing shelve

shelve for 608-xxx bearings.(22mm diameter) -PETG 4x perimeter

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
239
Likes
60
Rating
5
P
PrintablesTrachtorBeam

Skadis Hook (Extra-Small Shelf)

Print in PETG using standard PETG printing parameters or some other tough plastic like ASA. I used Inland PETG and printed with Prusa's generic PETG parameters and infill 50%. Part is thin, so infill 15% will be fine. But, higher infill…

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
236
Likes
26
Rating
5
P
PrintablesCharlie Essers

HomePod Mini Wall Outlet Shelf for US Duplex Receptacles

I was too lazy to replace my office duplex outlet with a GFCI or combo one, so I modified this design. If you use the sliced file, I tried to keep the supports to a minimum. Thanks, Jordanburgy, for the great design!

Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
46
Rating
4.75
P

Pod Dispenser (Dishwasher Laundry)

A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…

Print approx. €8.40–€10.27 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
61
Rating
5
P
PrintablesHeidi Makes

Parametric Mini Shelves

Get your bathroom cabinet organized with these parametric shelves! Ideal to optimize small cabinets where vertical space is not well utilized. Included you'll find 4 predefined sizes: small (15x5x8cm) large (20x8x12cm) large with tall…

Print approx. €7.30–€8.93 excl. taxPreliminary estimate for one variant

Downloads
224
Likes
102
Rating
5
P
PrintablesWanderWardr

FIFO Can Shelf XL

A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
222
Likes
48
Rating
5
P
PrintablesModMonster

Undertale "Despite everything, it's still you" Text Box with mirror and shelf stands

This model requires you to print the main text box and then optionally any of the 3 attachments which slide into the back of the text box. The stand mount is designed to allow the model to stand on its own on a table or shelf (see picture…

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
215
Likes
35
Rating
0

(No Supports) Fix Twister Game Spinner and Pin/Washers Replacement

These parts can be used to fix your broken Twister game. No supports required. I would suggest using 3-4 perimeters for all the parts to increase strength. If the friction fit parts do not fit properly try adjusting your flow factor.

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
7
Rating
5
P
Printablessicarius80

Shelly Mini Wall Mount

Small and simple Wall/surface mount for Shelly 1 Mini Gen3 Do you like my models? Consider buying me a coffee .

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
13
Rating
5
P
Printablesi6o6

Seat Ateca parcel shelf replacement part

Replacement part for Seat Ateca parcel shelf. Might fit other car models but didn't test that. Print the pins as shown in the picture (more strength). I used a 0.3 [mm] layer height (should only be functional) and PETG and it works like a…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
212
Likes
15
Rating
0
P
PrintablesDaParts

Diamond Hexagon Wall Shelves

Here is a custom set of small wall shelves I designed! Enjoy! NOTE: The GCode file is set up to have a color change option 70mm through the 80mm height. I did this because it adds some aesthetic. Please also note this design does not have…

Print approx. €9.13–€11.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
209
Likes
101
Rating
0
P
PrintablesVastasStudio

Wave Shelf

A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…

Print approx. €7.57–€9.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
208
Likes
154
Rating
5
P
PrintablesFH

Shelly Housing (1/1PM Gen3)

Disclaimer : Be aware that in many jurisdictions, mains voltage installations must only be executed by qualified or even only certified individuals! This model description as well as the attached pictures are only for demonstration…

Print approx. €1.44–€1.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
207
Likes
103
Rating
0
P
Printablessraj

Sheet holder for PrusaMini+

2x sheet holder for 3D printer Prusa Mini/+ Print instructions PETG, need rotate 45°C, (at. picture)

Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
205
Likes
29
Rating
4.86
P
PrintablesDavid

VW california t6.1 shelf holder

Print with supports sideways, PLA was tested and works nicely in Cali.

Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant

Downloads
201
Likes
9
Rating
0
P
PrintablesDragomy

Shelf Bracket 13 x 13cm // Regal Winkel 13 x 13cm

A simple clean looking Bracket for a shelf 13x13cm in size, Pretty stable with 15% infill. // Ein simpler Regal Winkel für Regale, 13x13cm groß, Ziemlich stabil mit nur 15% Infill.

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
16
Rating
0
P
Printablesharaldan

Two-level monitor shelf stand

Having found a monitor stand design that I liked, I wanted to make it more flexible, and so I added brackets for a second level. My model uses a shelf I had lying around, which was 16mm thick and 170mm wide. I cut it into two pieces to…

Print approx. €5.10–€6.24 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
78
Rating
0
P
PrintablesCopyRited

Audio Technica ATH-M40x/50x Earcup Shells

Designed a 3D model of the ATH-M40x/50x Earcups in Fusion 360 to be printed and allows you to customize your headphones. In my design, I have removed the locking mechanism for the 2.5mm cable as the cable holds very tightly even without…

Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant

Downloads
195
Likes
42
Rating
0
P
PrintablesBetawolf

Fisher Price Coins

Introduction A friend of ours was missing a few coins from a Fisher Price Shop she had for her grandchildren to play with. There are coins for 5, 10 and 25 cents, but I included the STEP files, Fusion360 design files and 3mf & GCODE…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
16
Rating
0