Search results: snapfit

Sort order

89 models

P
PrintablesDukeCGN

Combinable Raspberry Pi 4 snapfit case - easy to add the Pi

I designed another RaspberryPi Case, because I was not happy with what I found. I designed this one to add the RaspberryPi easily without harming it. In many cases I found, I have to choose violence to bring it in. Here I designed the…

Downloads
54
Likes
6
Rating
0
P
PrintablesNeybao

Tile Fabric - Print in place and snapfit

Printing Material : PETG (PLA will work too but snapfit features may wear quicker) Layer height : 0.20mm is fine Bed adhesion : you need decent adhesion capability like with most 3D printable fabrics All other settings can be the default.…

Downloads
30
Likes
14
Rating
0

ESP32-S3 CAM Case SnapFit

Simple Case Model, modify mounts or holes in slicer.

Downloads
852
Likes
32
Rating
5
P
PrintablesDotNetWorker

Raspberry Pi Zero & Zero 2 Case - Snapfit, Screwless, inc. camera slot

2025 improved version of this model is here: https://www.printables.com/model/1242691-raspberry-pi-zero-zero-2-case-snapfit-screwless-in Raspberry Pi Zero and Pi Zero 2 Case Compatible with old & newer Pi Zero , Pi Zero 2 & Pi Zero W…

Downloads
736
Likes
65
Rating
5
P
Printables3DesignsCH

Laptop Stand for 13-15inch - Snapfit or with tools

Simple Laptop Stand for 13 to 15 inch Laptops. Two Versions, one is snapfit the other with heatinserts and screws. Both versions are rigid, therefore the tolerances are quite tight! If you don't calibrate your filaments, don't think about…

Downloads
451
Likes
33
Rating
4.83
P
PrintablesDotNetWorker

Raspberry Pi Pico Case - Snapfit, Screwless

Raspberry Pi Pico Case Compatible with the Raspberry Pi Pico Snap fit design - no screws required Quick and easy to print, no supports and minimal size Designed to use minimal filament Screwdriver slot for easy lid lifting/opening Access…

Downloads
448
Likes
62
Rating
5
P
PrintablesPlants X Tech

Pill Boxes Snapfit & Frictionfit

Wife wanted a pill box, designed two. Works for what it was designed for. Designed to print at .2mm layer height, haven't tested it at .3 yet.

Downloads
371
Likes
54
Rating
5
P
Printablesjohanncc

Snapfit NR200 PCIe slot covers

Designed these PCIe slot covers for the NR200 to give the CPU cooler a bit more air, also they snapfit ! Note The covers are dimensioned using ABS which shrinks a bit more than other plastics, so if it's too loose for you, try scaling the…

Downloads
310
Likes
64
Rating
5
P
PrintablesSolveSoul

V380 Snapfit Camera Mount for Creality Ender 5 Plus

Snapfit camera mount for a V380 camera. Snaps perfectly to the frame of the Ender Creality 5 Plus. The camera can be locked into place by rotating it onto the mount. Print orientation: Best printed on its side otherwise the print lines…

Downloads
272
Likes
18
Rating
0
P
PrintablesilMitch

Articulated Rpi Camera v2 Holder with Snapfit Spherical Joints

Rpi camera v2 holder/mount with articulated snapfit joints and mechanical interface to the ethernet RJ45 female connector of your raspberry 3/4. The snapfit joints allow to adjust the camera orientation. All mechanical interface are…

Downloads
211
Likes
32
Rating
3
P
Printablesly keosovandara

Snapfit Box

Snapfix box protects your stuff

Downloads
199
Likes
24
Rating
4
P
PrintablesDotNetWorker

Raspberry Pi Zero & Zero 2 Case - Snapfit, Screwless, inc. heat sink & camera slot - Version 2

Raspberry Pi Zero and Pi Zero 2 Case - Version 2 This is an improved version of the case that I designed ten years ago. This version has improved HDMI connector slot, permitting more types of HDMI connectors to be compatible with the…

Downloads
186
Likes
15
Rating
5
P
Printablesunknow1assassin

Snapfit NR200 PCIe Slot Covers (Reinforced)

This is a remixed model based on the Snapfit NR200 PCIe Slot Covers, designed to snap onto the back of the case where the vertical GPU support is located. The updated model is more precise in terms of its size and features reinforcement…

Downloads
184
Likes
24
Rating
5
P
PrintablesJason999

Fidget Iris - 8 Sliders Snapfit

FOR KAI ONLY NOTE THAT YOU WILL HAVE TO PRINT 8 TRIANGLE PIECES SO MAKE SURE WHEN SLICING TO OPEN ALL 8!!!!

Downloads
182
Likes
18
Rating
4.5
P
PrintablesPatrick Hemmes

Snapfit connector

Snapfit connector, merge with your 2 prints in your slicer or CAD software, to add it to your designs.

Downloads
161
Likes
19
Rating
0
P
PrintablesThird Dimension

Henry Snail cartoon figure snapfit with poseable eyes

Henry snaps together and his eyes can be posed. The gcode for his eyes contains a pause to facilitate the color change. All my models are free to download and remix. If you appreciate them, please leave a download and a like!

Downloads
155
Likes
28
Rating
5
P
PrintablesZiRo 3D

Snapfit Banana Pi M2 Zero Case

I'm using the banana and klipper to control my Flsun Q5. So have fun printing and please leave a like!

Downloads
141
Likes
10
Rating
5
P
PrintablesAsh

Pi 4 Snapfit 60mm fan case

Note: This is an old model that I am keeping up as people are still downloading it, apologies for the terrible cover photo. This is a later version of my 60mm fan snapfit case design and features a screwless design that allows the Pi and…

Downloads
140
Likes
10
Rating
5
P
PrintablesMark Hall

00 Basic Snapfit Ring Ear Gauge

Both pieces will print successfully without support. The filler piece needs a brim for buildplate adhesion unless you've got a really good setup. Make it in several colors to chain them together!

Downloads
139
Likes
32
Rating
5
P
PrintablesXeth Knight

Slim Wallet - 5 card, sliding, mechanical, snapfit

This is a design I came up with after seeing an ad for the Groove wallet. It can hold up to 5 cards, and incorporates a mechanism to fan the cards out for easy access. It prints in three parts with no supports, and securely snaps together…

Downloads
132
Likes
19
Rating
0
P
PrintablesSANAIR

Universal Wallmount/Slider/Snapfit

This universal wallmount mounts as a slider into a base and snap-fits at its end-position. Push to release again. Fusion360-parametric file with some custom parameters is attached in order to comfortably fit to your needs. I have 3D…

Downloads
131
Likes
18
Rating
0
P
PrintablesStone

Raspberry Pi 5 Case Snapfit on VESA 75mm mount

I wanted to mount my Raspi on the back of a screen while leaving the VESA mount functional for hanging the screen. Combined with the snapfit case, this leaves a very neat setup. I extended the case top by 5mm height to allow space for a…

Downloads
127
Likes
22
Rating
5
P
PrintablesTallat Mehmood

Raspberry Pi 5 Case | Ventilated 3D Printable Enclosure with Snapfit Assembly

This is a custom-designed enclosure for the Raspberry Pi 5, created for efficient cooling and easy assembly. The case features a ventilated design to improve airflow and prevent overheating, making it suitable for continuous use. It also…

Downloads
112
Likes
60
Rating
0
P
Printablesjarrah

Raspberry Pi 4 SnapFit Case Geekworm X857 SSD Board

This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board). There are two versions - a standalone case and another that can be attached to a UK power socket to…

Downloads
111
Likes
14
Rating
5
P
PrintablesKytor

SCART-SnapFit for Gscart 8:2

SCART — it delivers fantastic crispy video, but the gentlest breeze will knock the connector loose. Securely snap the male SCART connector in place on your gRetroStuff LLC (“superg”) gscart 8:2 (aka “gscartsw”) Automatic SCART Switch with…

Downloads
102
Likes
19
Rating
5
P
PrintablesMr_Poeschl

Pi 3 Snapfit fan 40/60mm case

This model is a customized version of the Pi 4 Snapfit 60mm fan case from @ash. I just wanted to have the cool infill look also on a case for the Raspberry Pi3, so I adjusted the holes for the plugs. There is also a 60mm and a 40mm fan…

Downloads
99
Likes
15
Rating
0
P
Printablessstevenson72

SnapFit Desiccant Holder

Not a whole lot to say other than this is another take on the desiccant holder ideas. This holder can be filled with desiccant and fits into the center of a spool while storing it in vacuum sealed bags to keep your filament dry. The is a…

Downloads
96
Likes
8
Rating
0
P
Printableslal12

Joystick snapfit case

Case for a joystick connected to an ESP / NodeMCU with snapfit joints. There are little pillars to screw in the MCU and the joystick.

Downloads
94
Likes
8
Rating
0
P
PrintablesBalloonActivity

Multiboard remix of Raspberry Pi Zero & Zero 2 Case - Snapfit, Screwless, inc. camera slot

Fits into multiboard: https://www.multiboard.io This is a remix of the Pi_Zero_Case_CameraSlot_ExtraDeep.stl from https://www.printables.com/model/267909-raspberry-pi-zero-zero-2-case-snapfit-screwless-in/remixes that snap fits into…

Downloads
94
Likes
15
Rating
5
P
PrintablesBerg

Raspberry Pi Pico W | Pico 2W | Slim | SnapFit | DS5Dongle

Raspberry Pi Pico 2W | Slim SnapFit Case | DS5Dongle A modified Slim SnapFit case for the Raspberry Pi Pico 2W, designed for use with the DS5Dongle project , which turns the Pico 2W into a receiver for the DualSense controller. About This…

Downloads
90
Likes
11
Rating
0

simple D1 Mini ESP32 snapfit case

simple snap fit case with openings for pin headers

Downloads
89
Likes
7
Rating
0
P
Printablesknickers

Pi 4 Snapfit 60mm fan case w/ exhaust and grill

Remix of AshTheMaker 's beautifully simple Raspberry Pi 4 case. This adds some exhaust vents on the sides, and a built-in fan grill. The grill is a separate shell inside the case top stl file. Split the part into 2 objects in your slicer.…

Downloads
85
Likes
3
Rating
0
P
PrintablesAdafruit

PyBadge FeatherWing Snapfit Case

Snap Fit Enclosure This enclosure is designed to secure the PyBadge PCB without any hardware screws. The PCB rests on bottom half with built-in standoffs. The top half features cutouts for the buttons and display. The two halves snap fit…

Downloads
81
Likes
12
Rating
0
P
PrintablesHobb3s

Updated Thule Snapfit Cradle

I printed the simplified snapfit cradle by mizellj, and it worked for awhile, however it snapped at the point where the screw goes several times. I decided to update the design closer to the newer design you can find in the stores so that…

Downloads
80
Likes
7
Rating
0
P
PrintablesGhostracer

Pill Box Snapfit

Had a need to get a pill box in a relative hurry and not much filament left but wanted the individual lids that original model provided so, I reduced the wall thicknesses to remove any infill. Also reducing internal height by 5mm as…

Downloads
68
Likes
6
Rating
0
P
PrintablesARdesigns

Build Tray — Snapfit — Modular Organizer

Description These trays are a snap-fit remix version of Polymorphic's Build Trays. I love using Polymorphic's trays but needed a snap-fit version that allows me to stack trays high without worry of trays toppling over. The snap-fit trays…

Downloads
52
Likes
15
Rating
0
P
Printablesarham_

Snapfit module

A cantilever snapfit module, for if you don't want to design one yourself.

Downloads
52
Likes
5
Rating
0
P
Printables3Ddy

Nozzle fan with snapfit for 50mm blower fan

In 2016 I've redrawn plasticWrap's nozzle fan design (http://www.thingiverse.com/thing:1106824) in Autodesk Inventor Pro 2016. Good to learn a bit about Inventor. I also tried as much as I can to make it parametric. This way it was easy…

Downloads
52
Likes
5
Rating
0
P
Printablestrohn_javolta

snapfit top glass lid corners w/ magnetholes for Bambu lab P1S/X1C

4 pcs ⌀10mmx2mm magnets can be used to keep everything better in place but probably aren't needed.

Downloads
46
Likes
3
Rating
0
P
Printablesm5kro

Proxmark 3 Easy Snapfit Case

A high quality case for your Proxmark 3 Easy. Extremely precise with no rattling or loose parts. Warning! The fit is extremely tight, so you may need to force it in a bit. Some variants of the Proxmark 3 Easy may have different screw…

Downloads
45
Likes
6
Rating
0
P
PrintablesCallan McNamara

Truncated Icosehedron - Snapfit

This model is about 120mm wide and requires printing: 12 pentagons 20 hexagons 90 clips This was printed at .2mm layer height using a .6mm nozzle on my M3 in PLA with 20% infill. It used approximately 150g of filament. I've included a 3mf…

Downloads
32
Likes
7
Rating
0
P
PrintablesChristopoulos

Shower Ring C-Form Snapfit (for 25mm rod) Scalable

This Shower Rings in C-Form (Top-Opened) are suitable for 25mm rods for snap-fit. For other diameters you can calculate and scale this model to fit. I printed the edgier one with ABS and brim-support on textured plate. The round one (you…

Downloads
30
Likes
3
Rating
0
P

SnapFit Buffalo Bills Logo

Go Bills! Tired of messy glue ruining your multi-color prints? This snap-fit Buffalo Bills logo is engineered to lock together without any adhesive. At 6 mm thick, it has a solid, substantial heft that stands up on a desk or mounts flat…

Downloads
29
Likes
4
Rating
5
P
PrintablesDave Corder

Snapfit Enclosure for ESP8266 Sinilink XY-WFMS 5V-36V Mosfet Switch Module

A small box for the cheap Sinilink XY-WFMS module. It is with a snapfit so no extra screws are required.

Downloads
28
Likes
4
Rating
0
P
PrintablesBrophet

The Quickmount - your under desk snapfit holder

Be sure to assemble correctly: respect the pins and holes on Top and Clip (image section view) and use the countersinks for orientation. It's recommended to print Clip and Holder with 100% infill. Works very well together with these Nuts…

Downloads
27
Likes
31
Rating
0
P
PrintablesErik Van Esch

Fysetc 7.0' LCD800480 V1.1 Case Snapfit

a case for the Fysetc 7.0' LCD800480 case snaps together with some force. printed in 0.3mm layer height and 1 top layer and 1 bottom layer. 3 walls material: black esun pla+ i used a textured pei sheet for the back and front

Downloads
26
Likes
3
Rating
0
P
PrintablesDukeCGN

Prusa Enclosure - Raspberry Pi 4 snapfit case

Closed this one, can be found here: https://www.printables.com/de/model/870348-combinable-raspberry-pi-4-snapfit-case-easy-to-add I designed another RaspberryPi Case that fits in the Prusa Enclosure (or any other M3 driven screw/insert),…

Downloads
26
Likes
4
Rating
0
P
Printablesmark_wsnr

Snapfit Lid for "Silica Gel Box with Sliding Lid" by humebeam

This is a lid for the "Silica Gel Box with Sliding Lid" by humebeam offering a snapfit mechanism to lock the lid in place. In order for the lid to work properly, you need to print the version of the box that is designed for the brass…

Downloads
25
Likes
4
Rating
5
P
PrintablesMartin v R

Raspberry Pi Zero 2W Snapfit Casing Aircooled

When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…

Downloads
25
Likes
1
Rating
0
P
PrintablesMr_Poeschl

Pi 4 Snapfit fan 40mm case

Had an 40 mm fan laying around, so I adjusted the case to fit a 40 mm fan. Also make sure the set the top and bottom layer to 0 and a 2D infill in the slicer to get the look-through look. The print in the images has the gyroid infill (not…

Downloads
24
Likes
1
Rating
0

Pybadge snapfit case front thicker walls

I remixed the face to add thicker walls

Downloads
24
Likes
1
Rating
0
P
Printablespareidolia

Grove Sensor Casing small 1x1 snapfit

Case for the smallest Grove Sensor Board with 20x20mm with vertical or horizontal connectors smd or normal should fit, but I only could test vertical through hole. Printing Print with 0.4 nozzle or smaller, since the walls are quite…

Downloads
23
Likes
2
Rating
0
P
PrintablesARdesigns

Build Tray - Snapfit - More Modules

Description These trays are a snap-fit remix version of Polymorphic's More Modules Build Trays. I needed a snap-fit version of Polymorphic's trays so I could stack trays high without worry of trays toppling over. These snap-fit trays…

Downloads
23
Likes
10
Rating
0
P
Printablesrobbin

RaspberryPi Zero (2) snapfit case for ender 3 (pro) or v2

i needed a case for the raspberrypi zero. i didn't want to use screws, so its snapfit. it doesn't require any support. the parts are already rotated in the right direction. it took me a lot of time to make this, so I hope it works for…

Downloads
23
Likes
7
Rating
0
P
PrintablesLukeO

CWWK X86-P6 Pocket NAS Sticker Replacement Snapfit

The CWWK X86-P6 Pocket NAS has a Sticker on the back that hides essentially holes in the case. This snap-fit replacment hides those holes. Choose your color, add additional vents, have fun. The model was created in FreeCAD, I have…

Downloads
22
Likes
5
Rating
5
P
PrintablesCats

Open/Close Sign without Snapfits

Matt Harrison made a great sign which can be all 3d printed. But my filament was maybe too old or wet or so, because the snapfits always snapped off. So instead of snap fits, these are now screwable pillars. Also I don't like printing big…

Downloads
21
Likes
1
Rating
0
P
Printablesjg

Adafruit MPM3610 Snapfit case

I needed a mountable enclosure for an Adafruit MPM3610 buck convertor, and liked the snapfit qualities of the Adafruit QTPy case: https://learn.adafruit.com/qt-py-snap-fit-case This is designed for mounting a Adafruit MPM3610 buck…

Downloads
17
Likes
0
Rating
0
P
Printablesfearless4

H96 Pro+ Replacement bottom with snapfit 80mm fan mount

Created this to help with H96 Pro + Android tv box running hot issues. This new case snaps in place of old bottom. Might need some type of glue to hold it in place, but should hold with a friction fit, I put a couple dabs of hot glue in…

Downloads
16
Likes
0
Rating
0
P
PrintablesR0285

Snapfit Lid for Laboratory Funnel (D:80mm)

Simple Lid to close the Opening of a funnel to prevent evaporation. Really specific for this kind of funnel, but might be usable for other funnels with some rescaling.

Downloads
15
Likes
1
Rating
0
P
PrintablesJohn Lindstedt

Garmin-snapfit_v1

In Onshape I drew this, and printed on a creality ender v2 sliced using prusa 0.1mm height with a 0.4mm nozzle. Worked, havent tested it too far. Also included a 30min test coupon for testing the snap-on functionality of your print. In…

Downloads
14
Likes
3
Rating
0
P
Printablesnamtabmai

SCART-SnapFit for Otaku 10:3

As with the original, only works with standard generic SCART heads. Most of my setup are retrogamingcables (RGC) which work fine. First time remixing any STL, so while it works for me it's possible it could need tweaking for tolerances…

Downloads
14
Likes
2
Rating
0
P
Printablesrevanth_Aeloori

SnapFit Adjustable Keyboard Legs

Description Give your keyboard the perfect ergonomic lift with these 3D printed keyboard riser clips ! Designed to snap easily onto most flat keyboards , these clips raise your typing angle for improved comfort, reduced wrist strain, and…

Downloads
14
Likes
3
Rating
0
P
Printables3Ddy

Nozzle fan with snapfit for 50mm blower fan - freecad

I've redrawn a slightly beefed up version of my orginal design in freecad after the original one broke. The original one was done in autodesk inventor. This one is highly (although not fully) parametric. I'm still learning freecad.

Downloads
13
Likes
1
Rating
0
P
PrintablesBerg

Waveshare RP2350B-Plus-W | Slim | SnapFit | DS5Dongle

Waveshare RP2350B-Plus-W | Slim SnapFit Case | DS5Dongle A Slim SnapFit case designed for the Waveshare RP2350B-Plus-W, offering an alternative to the Raspberry Pi Pico 2 W for use with the DS5Dongle project and its variants. DS5Dongle…

Downloads
13
Likes
2
Rating
0
P
PrintablesUriah

FT-5 Snapfit Volcano DiiCooler fan bracket

This is a small 2 piece snapfit mounting bracket for the great DiiCooler . The bracket snap fits onto the screws holding the 2 pieces of the sandwich for the FT-5 X carriage together making it super easy to add/remove. You can slide it…

Downloads
13
Likes
0
Rating
0
P
Printablesossner

Snapfit Parametric Cylinder Hook

A hook that can snap around a cylindrical shaft of any diameter. Robust and sturdy. You can change the following parameters: diameter: The outer diameter of the cylinder, the inner diameter of the hook x_thickness: The outer diameter of…

Downloads
12
Likes
0
Rating
0
P
PrintablesAru

OtakuGames SCART Switch SnapFit

Small remix of namtabmai's model that fits the 2024-03-13 DJF board.

Downloads
12
Likes
5
Rating
0
P
PrintablesDr_Froggy_rD

Snapfit building block for operation in prusaslicer with two sides

Using the cut feature of prusa slicerd with a snapfit feature to connect the two cut parts in a secondary step needs a bit of work but works you need to reposition the stl at the edge of the cut plane in order to make it works (using a…

Downloads
12
Likes
0
Rating
0
P
PrintablesDaughterDaddy

Pi Zero / Zero 2 screw less snapfit case Remix

I needed a lid for the case with IO and heatsink cut out. So I remixed it with the case from DotNetWorker. No support needed.

Downloads
11
Likes
1
Rating
0
P
PrintablesSuwoernyTECH

Snapfit Wallmount

A self covering snapfit Wallmount including onshape files. …and no supports!…

Downloads
9
Likes
1
Rating
0
P
PrintablesForgelab

SnapFit Skadis screwdrivers holder

Screwdriver holder for ikea skadis laser cutted in 3mm plywood or 3d printed it locks in skadis panel with snapfit compliant lock.

Downloads
8
Likes
2
Rating
0
P
Printablesmalkyan

Vertical Holder for Raspberry Pi 5 for VESA 75mm mount with Snapfit case camera flex hole

Vertical remix of the Raspberry Pi 5 holder mount for VESA 75mm + Snapfit case with hole for camera flex

Downloads
7
Likes
1
Rating
0
P
PrintablesKopoi

SnapFit PulseFire Saga

Snapfit, an add-on to Pulsefire saga that you can customize yourself. You can add something 3D on a snap-fit part or just draw like i did on the image.

Downloads
6
Likes
1
Rating
0
P
Printablesdomis4

Snapfit NR200 PCIe Slot Covers (Angled) for Coolermaster NR200 Case

This is a remix of the remix for the the Snapfit NR200 PCIe Slot Covers, designed to snap onto the back of the case where the vertical GPU support is located. it is based on the reinforce model to be more sturdy the vents are angled to…

Downloads
6
Likes
1
Rating
0
P
PrintablesNixo

IR Obstacle Avoidance Sensor Module Case Snapfit

A simple 3D-printable snap-fit enclosure for an IR sensor, available in three versions. The enclosure consists of a base and a snap-on lid. The cable can be secured to the lid using zip ties for strain relief. Features: Snap-fit design –…

Downloads
6
Likes
0
Rating
0
P
Printablesdiitsuku

Yoyo Snapfit keychain

Created with a Magicyoyo K2 and K3 to get a starting point. File naming scheme: ##D is the diameter of the center of the yoyo with string wound up. ##T is the thickness, or the distance between the yoyo sides. Toss a comment if you need…

Downloads
5
Likes
3
Rating
0
P
PrintablesM

Snapfit Y-Axis Motor Cable Chain Mount (FFCP, Dup4)

Snapfit Y-Axis Motor Cable Chain Mount (FFCP, Dup4) (tool-less) I still haven't found the X-Axis cable chain mount I like but I modeled this recently and it fits very well, without tools. Insert an M3 nut and use an M3 bolt to remove the…

Downloads
4
Likes
0
Rating
0
P
PrintablesBrandon Ellis

90g Snapfit Commander Deckbox

No supports or special settings needed for the print Prints in 3 pieces: Bottom, snap ring, and top. The snap ring permanently fits into the bottom, and the top shoud easily connect and disconnect to the snapring. Like the boulder…

Downloads
4
Likes
1
Rating
0
P
PrintablesPixtxa

Snapfit Case for Heartbeat THT

The Heartbeat Soldering kit by Blinkyparts is a nice low power LED flasher that can run from nearly empty batteries. Sadly it wouldn't blink heart-shaped. But it's OpenSource (more background and circuit details can be found at Heartbeat…

Downloads
3
Likes
1
Rating
0
P
PrintablesVaguePariah

ProtoMatten_Snapfit_H

ProtoMatten is an open source 3d printed terrain system for vivaria including aquariums, terrariums, paludariums, etc. This is the H shaped mechanical connector.

Downloads
1
Likes
1
Rating
0
P
PrintablesMadebyaCat

Gridfinity box lid snapfit

a simple gridfinity box lid for 1x1, 1x2, 1x3, and 1x4 wide boxes.. I didnt want to reprint a new box/boxes to have lids on them so I created a separate lid you can put on your existing box/bins

Downloads
1
Likes
1
Rating
0
P
PrintablesVaguePariah

ProtoMatten_Snapfit_U

ProtoMatten is an open source 3d printed terrain system for vivaria including aquariums, terrariums, paludariums, etc. This is the U shaped snapfit connector.

Downloads
0
Likes
0
Rating
0
P
PrintablesTrav.Bomb

Pi 5 Mini Case (Snapfit/Tool Free Edition.)

Pi 5 Mini Case — Print & Assembly Guide Sep 18, 2026 · TravBomb What you need Four printed parts, a Raspberry Pi 5 and the official Active Cooler. No screws, no heat-set inserts, no tools. Part Qty Notes Shell 1 The outer body with all…

Downloads
0
Likes
0
Rating
0
P
PrintablesBrandon Ellis

70g Snapfit commander deckbox

No special printing instructions required.

Downloads
0
Likes
0
Rating
0
P
Printables

Proxmark 3 Easy Snapfit Case

A high quality case for your Proxmark 3 Easy. Extremely precise with no rattling or loose parts. Warning! The fit is extremely tight, so you may need to force it in a bit. Some variants of the Proxmark 3 Easy may have different screw…

P
Printables

Snapfit Case for Heartbeat THT

The Heartbeat Soldering kit by Blinkyparts is a nice low power LED flasher that can run from nearly empty batteries. Sadly it wouldn't blink heart-shaped. But it's OpenSource (more background and circuit details can be found at Heartbeat…

P
Printables

Vertical Holder for Raspberry Pi 5 for VESA 75mm mount with Snapfit case camera flex hole

Vertical remix of the Raspberry Pi 5 holder mount for VESA 75mm + Snapfit case with hole for camera flex

P
Printables

Laptop Stand for 13-15inch - Snapfit or with tools

Simple Laptop Stand for 13 to 15 inch Laptops. Two Versions, one is snapfit the other with heatinserts and screws. Both versions are rigid, therefore the tolerances are quite tight! If you don't calibrate your filaments, don't think about…

P
Printables

Raspberry Pi Zero 2W Snapfit Casing Aircooled

When the printer and the camera asks more of your Raspberry Pi and its temperature rises, you'll have to cool it down to prevent throttling. So if you got a spare 2510 fan laying around like me, you can use it for cooling your Raspberry.…