10,849 models
I attempted to use some 3D-printed 18650 spacers, but they weren't ideal. The injection-molded design you can get from aliexpress has two identical tabs on each side, which makes the other printed alternatives weaker. This updated module…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
Creality Space Pi is a nice filament dryer. However, there is one major flaw (similar to some other dryers, like Sunlu S2) - it does not vent out the humid air. This traps humid air inside the dryer, making it hard if not impossible to…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Intro This is a very compact, low-profile 90 degrees right-angle bit holder for standard hex bits . It is designed to reach screws where a normal screwdriver or bit holder simply does not fit. The special designed variable bit fitting…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant
Spaceballs Eagle 5 Flying RV
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
A set of the most common bookbinding spacers used for off-set cutting of bookcloth and book board when binding or re-covering hardback books. Dimensions: height 5mm, length 254mm, widths are 20mm, 10mm, 7mm, 5mm, & 3mm. Spacers have…
Print approx. €2.72–€3.32 excl. taxPreliminary estimate for one variant
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
Print approx. €7.28–€8.90 excl. taxPreliminary estimate for PETGSource material: PET
Level up your GraviTrax Junior fun with this compatible 3D-printed spacer! It's a nifty add-on for creating epic marble runs. Just pop it in and let the marbles roll! Will require supports and some minor cleanup work. Disclaimer: Only…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
2D plate / wall display for the astronaut space suit patent by NASA from 1973. Reflects designs from the later Apollo missions (15-17) as well as the Skylab suit. Inspired by Ken Mills' patent art 2D plates (…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
I reverse engineered MDT buttsttock spacer. it is compatibile with original. Don't forget to reorient the model on the bed in a slicer. It is upside down by default. No supports, Enjoy.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
SpaceBalls :We Ain't Found $hi+ A free sample from the MyClub Spaceballs Little Army Men Collection
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Motivation I recently purchased a P2 Laser Cutter and AC Infinity 6” Inline Duct Fan intending to attach 4” ducting to the inlet side. But the outlet of the P2 was too small for 4” ducting. Additionally, the weak stock internal fan would…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Those spacers offset the top of the leadscrews by 13mm and reduce the depth of stepper mounts main hole. On my 250mm Formbot Kit, the leadscrews are a bit too tall in my opinion because the top of the front leadscrews can be hit by the…
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for one variant
I have designed this 20mm pedal spacer and new pedal stop to simplify heel and toe with a Toyota GT86 / GR86 / BRZ. Just contact me for further details or if you need a print. You need M6x30 bolts / nuts.
Print approx. €5.11–€6.25 excl. taxPreliminary estimate for one variant
Spaceball One from Spaceballs I really need to recreate the opening scene with this model in blender.
Print approx. €8.55–€10.45 excl. taxPreliminary estimate for one variant
Gravitrax Spacer - 50mm and 100mm These height stones are compatible to the Gravitrax system. 50mm Height Stone : Equivalent to the height of five regular height stones. 100mm Height Stone : Equivalent to the height of ten regular height…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
Since the door sliders in a garden shed break away and the replacements are quite expensive i remodeled the part. I did my best to replicate all dimensions, but was a bit liberal with the width of the rail for ease of printing. Since the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I created this model for my 3DConnexion Spacemouse Wireless and my Elgato Streamdeck. You find some other models on Thingiverse, but for my personal preferences they are too plain, and it feels not natural to use the Streamdeck buttons,…
Print approx. €11.97–€14.64 excl. taxPreliminary estimate for PETGSource material: PET
When securing cupboards to the wall, IKEA provide some adjustment but it can help to have more options when the wall line is not parallel. Fortunately I found a model already designed by @MotorboatMe_237913 so just needed to modify the…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Have been very busy with work, life etc. I had some time to knock out a Mooncake model from Final Space. A really awesome show on Netflix, and KVN!!!! is definitely the cutest of them all. Gary: Shuddup KVN!!! It's always been…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Fox Float Travel spacer for Fox forks, taken from 2012 model FOX36. 10mm and 20mm spacer models. check https://www.ridefox.com/fox_tech_center/owners_manuals/012/index.html how to change travel on your Fox float fork
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant
Buffer space hook which allows screwing the buffer 10° angled.
Print approx. €1.27–€1.56 excl. taxPreliminary estimate for PETGSource material: PET
But this is a simple print to use as a spacer so you can easily hole punch plastic to make a face shield for the 3dverstan face sheild (north american) https://3dverkstan.se/protective-visor/protective-visor-versions/ Swingline used…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Lost those little fiddly plastic spacers for your sprockets? Never fear! Don't despair, whip up some plastic joy with your machine at home and get back on your bike. I used the engineering drawing from…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
It is here, after your long search it is found. This print is very simple for Ludicrous Speed printing. Good luck and may the schwartz be with you.
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
Spacers for IKEA Skådis are accessories that allow you to mount the perforated Skådis panel on various surfaces, such as walls or wardrobes, while maintaining some distance between the panel and the mounting surface. This spacing is…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I was inspired by this model by CuriousMint, but it didn't perfectly meet my needs so I decided to start my own model from scratch. This model consists of two parts that fit together (I also glued them). I printed both pieces vertically.…
Print approx. €20.18–€24.66 excl. taxPreliminary estimate for one variant
Want to travel the space? Just save your money and enjoy the ride before you grow up! Space for money? Checked! Hyperspace circuits? Checked! Quantum engine boost? Checked! Comfy chairs for the crew? Checked! On-board antigravity source?…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
Nothing is more relaxing than combing the desert when you are supposed to be working. Here it is, Spaceballs the zen garden. comb the desert and see if you can find Princess Vespa of the planet Druidia. Or maybe Barf the Mowg, half man,…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
This is a mobile “Place Anywhere” Tool Organizer. It can be used to organize tools for any project you may be working on, for your MakerSpace wherever your working. Lots of storage and a generous tray for all your tools. I made this on…
Print approx. €15.63–€19.11 excl. taxPreliminary estimate for one variant
See assembly diagram. The model parts snap together with pins, a drop of super glue in the pins is recommended. The magnetometer is very long. I used 2 of the 3 boom parts in my print (see photo). I added supports in the slice of all…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Wardrobe Space Saver This is a space saver for your wardrobe. The hook can move freely and lock into 3 positions, you can also turn the hook 360°. There are only little supports needed for the print and the hook joint is printed in place,…
Print approx. €4.60–€5.63 excl. taxPreliminary estimate for one variant
My grandfather's old Mont blanc ballpoint pen came with the longer “Riesenmiene”. Current refills are a litte shorter than this giant refill. To use current refill, you need to putt an adapter at the end of the refill. In the past you got…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
This is a modified version of the standard 19.5 mm ground glass spacer that comes with the Lomograflok Instax Wide Film Back. This should allow you to achieve sharp focus at wide apertures with a Speed Graphic that has a Fresnel focusing…
Print approx. €4.97–€6.07 excl. taxPreliminary estimate for one variant
Wall-mount for Eufy Spacecam baby monitor. Allows a good angle for monitoring a crib below, or an entire room if placed high enough. Blocks blue LED light from shining on baby.
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
Give your phone some time to rest and recharge. Story Ever since I saw ThePhonePillow by HpInvent, I wanted to remix it into a wireless charging pillow. Alas, HpInvent's is using a very restrictive closed license, so I would not have been…
Print approx. €8.97–€10.96 excl. taxPreliminary estimate for PETGSource material: PET
Jednoduchý model raketoplánu - například jako hračka pro děti. Snadný tisk, vhodné je použít podpěry pro zadní motory
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
A CPAP mount that fits in tight space between a bed and other furniture/wall. Designed model provides a mounting plate on which an AirSense 10 CPAP unit can securely rest while retaining access to the removable side water reservoir. The…
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for PETGSource material: PET
These are a simple way to provide a 1/8" gap between drawer faces when installing them on the drawers. When I previously tried using a piece of wood, it was flat and would often fall off. These spacers have a 90 deg. face that helps to…
Print approx. €2.64–€3.22 excl. taxPreliminary estimate for one variant
bike bottom bracket 5mm spacer = instead of two single spacers BSA BB
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I noticed user Bethaney Call had mentioned in the comments that at some point in the past there was a planting module without diffuser sieve. As I figure plants with longer roots may get entangled in the sieve, I wanted to have a separate…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for PETGSource material: PET
This 3D-printed spacer is designed for Steyr air pistol cylinders, providing a secure and stable fit. It helps maintain proper alignment and spacing, ensuring consistent performance for both training and competition. The spacer is…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
I added spacers to a 4x5 Gridfinity Spacer to fit into a Bisley Style No Name Desk Cabinet with 23.5 x 38 cm drawers (inside Measure) You need two of those Grids to fill the drawer. My first model/remix so feedback is very welcome
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Was fooling around in Tinkercad one day and thought of creating a spaceship that could be printed support-free and this is the result. The name was automatically generated by Tinkercad and is as usual rather whimsical. The gcode is for…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
This is my interpretation of the Time and Space Travel stones from the book The Defender written by Larissa Soehn. From the Book "Nestled against the tree are two foreign-looking objects. The first object is a perfectly round orb. Light…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A spaced-out organizer for holding all your 3D-printing tools: Clippers, Tweezers, Wire Toothbrush, USB's, Filament Clips, Acupuncture Needles, Sandpaper, Gluesticks, Small Wrenches and Screwdrivers. Customize to fit your 3D-printing…
Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant
I found a couple of spacers for the Sunlu FilaDryer S2, but they were all too loose and/or too big. Since the spacer opens the whole top of the box, it doesn't need to open it up too much. I tried a couple of spacers, and most of them…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Purpose: It’s expensive enough, having to buy a specialized lockpick for each keyway. It’s especially expensive to have to buy separate 5- and 6-pin versions for each keyway. So just buy the 6-pin version, and use this spacer when picking…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
EN: Safe and easy laying with this Tile Spacer. Allows easy a symmetrical joint pattern. With the correct laying and choice of dimensions, an optimal drainage and protects against edge flaking. Consumption: Approx. 7 pcs./sqm (plate size…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
Nobody likes having open holes in their hydroponic system, but sometimes you want to space your plants apart, or you're staggering your planting times to spread out your harvest. This is just a little cap that you can put onto any unused…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
My dad asked me to buy a small screwdriver that could take a standard 6.3mm hexagonal bit, so instead i made one with his request , large base but low height . I'm sharing it since a lot of people where he works wanted one too , hope you…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
Keurig K-Supreme spacer to prevent coffee to splash out of your cup
Print approx. €5.75–€7.03 excl. taxPreliminary estimate for PETGSource material: PET
A Space Shuttle Line Art display plate
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Love my BunkerKings CTRL loader for paintball, but spacing between the button on the shell and the board made it harder to press. I designed this small spacer to fit inside the shell membrane and it activates the board power much easier.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
SpaceX Keychain
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
EEW Nano bobbins can be used on the EEW 6.0 flyer, but they leave a sizeable gap on the flyer rod. the bobbin can slide to the left at higher speed and drag the break band with it, which will eventually catch on the flyer arm and stop the…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Spacer to put the leg of IKEA VIMLE sofa in so it stays 10 cm off the wall.
Print approx. €4.34–€5.30 excl. taxPreliminary estimate for one variant
This is v3 of the model, Ultimate Edition. EVEN more ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design promotes air circulation…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Distanzscheiben für Sigma Sport Navihalter, da ohne Scheibe mein ROX 4.0 kontakt zum Vorbau hat. Längere Schrauben ist notwendig → Original M3x6 (Senkschraube) Spacers for Sigma Sport navi mounts, as my ROX 4.0 has contact with the stem…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Space Port Exploded Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer not…
Print approx. €19.49–€23.82 excl. taxPreliminary estimate for one variant
Hoffman style spacer for beehive frames | Mezerník pro úpravu jednoduchého včelařského rámku na hoffmanův
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Designed to fit these beakers (Amazon UK). If you want to modify for a different set—see the attached Fusion 360 design—and please share yours as a remix, for others who may have the same set! Design notes I initially tried a simple…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
v3 now released , get it here . It has even more ventilation but needs supports when printing. v3.1 also released for those of you who have a UGreen Nexode PB763/PB761 10000mah powerbank (as per one in the photos), get that custom one…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Fully handmade model of the Orion Multi-Purpose Crew Vehicle ( MPCV ) is a partially reusable crewed spacecraft used by NASA for the Artemis lunar exploration program. It consists of a crew module (CM), a space capsule built by Lockheed…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Space Port Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer not one to…
Print approx. €22.19–€27.13 excl. taxPreliminary estimate for one variant
A stand for building a custom rocket or spacecraft design using Lego Technic connectors. Based on Smithsonian educational activity Build a Spacecraft: https://www.instructables.com/Design-a-Spacecraft/ See project file (.3mf) for…
Print approx. €3.19–€3.90 excl. taxPreliminary estimate for one variant
Bei dem Zippo 1932 Replika ist das Problem, dass es höher ist als ein normales Zippo. Beim Original 1932 Replika-Zippo ist deshalb schon ein Abstandshalter dabei. Leider ist dieser zu klein, so dass der Double Flame Jet Einsatz zu tief…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
This is v3.1 of the model, the UGreen Nexode Batterybank Edition. Superior ventilation ability but supports are required . Elevates UTR device by 3 mm to improve passive airflow and reduce heat build-up Ventilated underside design…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
Super easy print. Just lay flat on print bed! GCode sliced for MK3S.
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
I saw the idea for this on Instructables by Workshop Edits, but that version had some improvements needed. To explain what this does: when you need to make repeated cuts using the miter gauge (cross cuts) on your table saw, you could…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Complete train station for garden model railway that can be printed at once and easily. The design includes benches, trash bins, warning line, cobbled floor, lights etc. Prepared for printing with several filaments - then you can get…
Print approx. €7.39–€9.03 excl. taxPreliminary estimate for one variant
Beginning a series of models of rocketships based on classic science fiction art from the mid-20th century, this is modeled on the somewhat absurd but classically simple rocket portrayed in this classic Soviet propaganda poster, which…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Made these spacers to finish a flooring job. Tired of the wood shims moving around!!! 1/8"- 3/16"- 1/4"- 5/16"- 7/16" sizes
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 30 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET
Container for drying desiccant (silica gel) in a Creality SpacePi X4 filament dryer. I previously used this container , but my model has several advantages: My model is designed for the SpacePi X4, not the normal SpacePi. The roll…
Print approx. €4.33–€5.30 excl. taxPreliminary estimate for one variant
Simple spacer which I used after replacing the thinner wheel on my garden wheelbarrow to fill the space instead using many metal washers. I'm posting it mainly as an idea and you can adjust it for your needs.
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
lid spacer for m5, I glued to edges of lid first then taped joints to dry. Gcode for anycubic kobra 2 neo
Print approx. €2.16–€2.65 excl. taxPreliminary estimate for one variant
02/09/2025 (UPDATE): Added “Flat” design. The STL includes the individual bodies for the logo and graphics. After opening with your slicer of choice, split the model into “Parts”. This can be used for multi-extruder or MMU equipped…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
For our latest space themed children's birthday party we bought some painter's overalls as space suits and needed a name badge for every guest like real astronauts have. As I could not find a satisfying model, I quickly created this name…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Simple spacer to shorten the thread length on the stair gate and add extra stability. Two disk sizes, both overall length of 45mm. I have added step files and the original file can be found at Onshape . it has a free account to alter to…
Print approx. €1.67–€2.04 excl. taxPreliminary estimate for one variant
battle spaceship space rocket galactic bitevni vesmirna lod vesmir raketa
Print approx. €11.28–€13.78 excl. taxPreliminary estimate for one variant
wider finger spacer replacement for leather tab
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
BATTLE SPACESHIP SPACE ROCKET GALACTIC BITEVNI VESMIRNA LOD VESMIR RAKETA
Print approx. €9.65–€11.79 excl. taxPreliminary estimate for one variant
I needed a quick spacer to mount Home Depot branded blinds flush with window trim. These spacers work best with ~5/8 inch (15.875mm) thick window trim. I printed out of white PETG because that matched my trim and blind color. 0.4mm…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
v3 now released , get it here . It has even more ventilation but needs supports when printing. v3.1 also released for those of you who have a UGreen Nexode PB763/PB761 10000mah powerbank (as per one in the photos), get that custom one…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
These spacers fit this Joseph drawer organizer . With our drawer, it allows almost zero shifting and opens up a space in the front to put more things. You will probably need to change the sizes of things to fit your drawer, but with Prusa…
Print approx. €13.92–€17.01 excl. taxPreliminary estimate for one variant
1/4 " Jess Em Jig The stainless steel Jess Em doweling jig (thin) are good jigs. In some situations, the jig is too thin to locate on a dowel to drill mating holes. This spacer shims up the jig so you can locate on the dowel. This shim…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
space command module
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Gravitrax spacer 6cm tall with hole in it, so it can be used for ball to drop through. It is made very tight (!!) and it will hold a lot in the paper plate. It is heavily modified from original, where the fitment using PLA was not good…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant
There really aren't enough Moltar themed models on Printables yet. Instead of expecting the world to change around me, I became the change I wanted to see in the world. Here is a fun multi-layer print. One version has slots to glue…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for PETGSource material: PET
A lil' shelf for the bathroom to save space and tidy things up. Small overhang, use organic support, 30° threshold.
Print approx. €14.10–€17.23 excl. taxPreliminary estimate for one variant
A 5mm spacer for an 8mm pedal rod
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Lots of filament dryers recommend keeping a small gap to let out humidity, but also lots of them don't have any way to make a gap. This is a simple solution for that problem. I designed it in FreeCAD, so if anyone wants to customize it I…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Spacer to go between GIVI Outback PL3112CAM racks and the Backcountry Panniers The prints are testet with 100% infill for thermal stability and printed in FilaLab PETG Filament and stock Suzuki exhaust. After riding in heavy slow traffic…
Print approx. €20.58–€25.15 excl. taxPreliminary estimate for PETGSource material: PET
![Futurama Space Ship - Piggy Bank Rocket [Futurama Inspired Cosmic Ship]](https://media.printables.com/media/prints/654736/images/9098547_fb814b0e-3ecf-4ca0-be08-6bf452b7e64c_5284d75e-103d-4256-ab0a-184357911a24/space_piggy.png)
