Search results: stab

Sort order

6,594 models

P
PrintablesVictor

Solder Scroll - Ergonomic, Adjustable Solder Tool

The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…

Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant

Downloads
54,628
Likes
17,744
Rating
4.88
P
PrintablesVC Design

Adjustable Feet - Strong

Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)

Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant

Downloads
10,874
Likes
5,377
Rating
4.87
P
PrintablesNicG

The Original Awesome Bee Feeder! - UPDATED for greater stability

************************ UPDATE 7th February 2023 ************************ Due to requests from some people who have made the Awesome Bee Feeder I have now updated the design to have the bottle holder and base plate combined as one item.…

Print approx. €2.87–€3.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
6,271
Likes
2,058
Rating
4.87
P
PrintablesConr8r

Upgraded Modular Hydroponics Tower - More Compact & Stable

Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…

Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant

Downloads
5,383
Likes
1,549
Rating
4.89
P
PrintablesEric T

Adjustable Low Stress Training(LST) Clip

An adjustable LST clip that locks into place. I've designed to minimize the number of overhangs. I recommend printing with supports with overhang threshold set at 40 degrees or less. Supports should only be needed on the bottom of the…

Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant

Downloads
3,025
Likes
166
Rating
5
P
PrintablesMeister Edel

Stable Hinge !upright printable!

Some time ago I was looking for a nice hinge to finish the encasing of my printer. Thanks to J-Max I found a nice hinge. It was easy to print and a lot stronger than the versions lying down. (https://www.thingiverse.com/thing:1396038) But…

Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant

Downloads
2,116
Likes
300
Rating
4.91
P
PrintablesKuban66

Furniture adjustable leg

Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,969
Likes
211
Rating
4.6
P
PrintablesPeter Farell

Nativity: Stable

Nativity: Stable with thatched roof and covered supplies. Split - Gule together sections. or use the version that is complete to resize to your liking.

Print approx. €24.70–€30.19 excl. taxPreliminary estimate for one variant

Downloads
1,942
Likes
381
Rating
4.67
P
Printablesquattro

Adjustable Perfect Desktop Fan Stand (for 120 and 140mm fans)

After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
1,570
Likes
478
Rating
4.8
P
PrintablesMartin Brown

Cricut Stabilo pen adapter

Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,478
Likes
129
Rating
4.86
P
PrintablesRossero

Adjustable Curve Sketcher

Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
1,402
Likes
1,337
Rating
4.69
P
PrintablesWill

Can Dispenser Adjustable XL no support

Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…

Print approx. €5.66–€6.91 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,366
Likes
622
Rating
5
P
Printablesthe_21_HER0

Moosstab Mittelalter Turm / Moss pole middle age tower

ein Moosstab der wie ein Mittelalter Turm aussieht

Print approx. €5.49–€6.71 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,288
Likes
229
Rating
4.75
P
PrintablesJerrari

GEN2 Adjustable Steel Sheet Holder

JERRARI3D.com Modular solution for storing steel sheets under your enclosure or table top. This version is FULLY ADJUSTABLE in width and depth Supported Printer Sheet Sizes Ex. Prusa Mini, Creality Ender 3 Minimum sheet size: 175mm wide x…

Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,044
Likes
278
Rating
4.92
P
PrintablesGoyetus

Prusa mk3 Y axis Adjustable Belt Tensioner and BED Holder with Paralelism and compatible with other Mods

This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
747
Likes
179
Rating
4.86
P
PrintablesMadMango

FOLDY 2.0 - The Foldable and Adjustable Phone Holder

If you like the design, support is much appreciated (: buymeacoffee.com/MadMango __________ FOLDY 1.1 (Older Version) Like many other people, I enjoy watching movies or series on my phone on long train journeys or flights to pass the…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
566
Likes
173
Rating
4.33
P
PrintablesVinceCZ

Kywoo3D Adjustable Phone/Tablet Holder - print-in-place

Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…

Print approx. €4.09–€5.00 excl. taxPreliminary estimate for one variant

Downloads
521
Likes
55
Rating
5
P
PrintablesNiH

Soldering iron add-on for 'Adjustable PCB Holder Tool'

Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
451
Likes
270
Rating
4.67
P
PrintablesDaHouzKat

Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure

Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
433
Likes
208
Rating
4.89
P
PrintablesRichard

Stabbed in head costume

The headband costume is designed in Fusion360. The model consist 3 file (4 pieces). Each part is fastly printed. You can glue the parts together while assembling. The model in fotos is printed on my Prusa mini+ with prusament galaxy…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for one variant

Downloads
430
Likes
201
Rating
4.81
P
Printableszuberio

Print-In-Place Adjustable Folding Phone Holder

An easy to print-in-place phone holder/stand with 3 possible angles for the phone. Please note that the STL includes first-layer ‘tabs’ between separate small parts that need to be broken/cut post-print.

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
61
Rating
4.5
P
Printablestom

Einstellbare Bohrschabone System 32 für Möbel/ Adjustable drill scraper System 32 for furniture

Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
109
Rating
5
P
PrintablesFabianVeile

Bistable Compliant Robot Gripper

Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…

Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant

Downloads
384
Likes
84
Rating
4.9
P
PrintablesMADAO

Adjustable Spool Holder for Dessicant

The bottom part is original, and the ventilated remix combined, other parts are from the original model.

Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant

Downloads
356
Likes
44
Rating
5
P
PrintablesKazu-chan

Fly fishing tippet holder adjustable model(dia 16mm)

You can add tube when you want to hold more tippet spools. Additional tubes are 2types(10mm,15mm) And you can add tube both side of body.

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
314
Likes
49
Rating
5
P
PrintablesSFer

3018 cnc Adjustable PCB clamp

Can be used in any cnc machine that has the same spacing on the extrusion on the bed (15180 aluminum extrusion). Allows for large adjustments and fine adjustments. Hardware 9 - M3x20 (If you tighten too much on the pcb clamp it may…

Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant

Downloads
314
Likes
46
Rating
0
P

Adjustable sternum/chest strap attachment

An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
288
Likes
100
Rating
5

stable Diamant Edition Case/Box incl. Stand for Raspberry PI 3b with applied 3.5" LCD Display (plus option for fan or sensehat)

Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…

Print approx. €2.95–€3.61 excl. taxPreliminary estimate for one variant

Downloads
282
Likes
28
Rating
0
P
PrintablesNils Kal

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System - mounted to standard painting rods

Mostly 3D-printed Ultimate Modular Camera & Cellphone Stabilizer System mounted to standard sized painting poles - PET bottle as counterweight This is my mostly 3d printed stabilizer system. You can use it with cameras or cellphone…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
282
Likes
146
Rating
0
P
Printableseponymous

Sunlu S2 Base Stabilizer (Mini/+)

Inspired by Djngnear's tabletop tray, I remixed mikeev's mount for the Sunlu S2 to entirely remove the screw holes (with no internal bits left over) and cut it down to fit on a Prusa Mini/+ bed. I also cut the power cord hole to be open…

Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant

Downloads
278
Likes
46
Rating
4.71
P
Printablescover1012

Stable and adjustable VESA 100 monitor mount

Printing instructions: PETG Layers: 0.2mm Infill: 40% Perimeters: 6 For protection and better grip, you should attach self-adhesive felt to the back of monitor_connection_part_1 .

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
276
Likes
61
Rating
5
P
PrintablesNadav Halwany

Adjustable Shower Head Stand

I needed to replace an old shower-head stand. I could buy one, but what's the fun in that? :-) Printed with PLA at 0.2mm. No need for glue or supports. Update 1: The screw cover was missing from the files. I've re-uploaded them. Update 2:…

Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant

Downloads
264
Likes
48
Rating
5
P
PrintablesEmkatech (Mike)

Beam Compass / Trammel, Adjustable Circle Drawing Tool for Large Diameters (tramel)

Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…

Print approx. €5.89–€7.20 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
69
Rating
0
P
PrintablesBurgessG

Horizontal Baseball Bat Holder / Adjustable

I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…

Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
254
Likes
58
Rating
0
P
PrintablesLukasz M

Stable Laptop stand for macbook pro 13"

The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…

Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant

Downloads
247
Likes
29
Rating
5

Support à portable ou tablette ajustable

Le support pour portable est un remix environ 50% plus large pour plus de stabilité pour les grands portables, mais n'utilisant que 27% de plus de filaments. L'angle varie de 25 à 55 degrés. Caractéristiques: 7 angles Pliable Aéré…

Print approx. €8.59–€10.50 excl. taxPreliminary estimate for one variant

Downloads
245
Likes
8
Rating
0
P
Printablesrufisium

Adjustable trolling motor support with/without Minn Kota logo

This is a gift. I added the Minn Kota logo for the recipient. There's a blank version as well. I used a wide brim on the top files because I didn't want the print to fall over due to a narrow base. I also lined the top of the print…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant

Downloads
229
Likes
21
Rating
0
P
PrintablesDaHouzKat

Advanced Filtration System Adjustable Exhaust (v1 & v2) for the Original Prusa Enclosure

You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…

Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
226
Likes
100
Rating
4.86
P
PrintablesBasementLAB

2020 Leveler Pad for Aluminum Extrusions - Stabilizer - with Leveling Mounts M6

2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
223
Likes
69
Rating
0
P
PrintablesMaster2386

IKEA Skadis Holder Zollstock / Meterstab / Folding Ruler

Printinformation: Use Support for the hooks. ("Support on build plate only") Thanks to https://www.printables.com/@Historicc_559983 for providing the Parametric IKEA Skadis Hooks i used in this Model.…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
217
Likes
17
Rating
5
P

Adjustable Spoolholder

This adjustable Spoolholder allows you to use every common spool on the market. You can adjust the width of the spool, by sliding the brackets on the Rail. The bearings assure a smooth filament inwind from the role. What you need for 1…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
215
Likes
49
Rating
5
P
Printablestom

Einstellbare Stütze für Pflanzen (Kräuter, Blumen, Gräser,...)/ Adjustable support for plants (herbs, flowers, grasses,...)

Eine stabile und einstellbare Stütze für Pflanzen, die ich nutze, wenn meine frisch geplanzten Küchenkräuter noch Halt benötigen. Um die Klammer für die Pflanze zu bewegen, hinten gegendrücken und die Stütze bewegen. Oder es auf eine…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
209
Likes
24
Rating
5
P
PrintablesDaHouzKat

Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo

Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
208
Likes
72
Rating
5
P
Printablesnanselm

DIN Mount for Arduino Uno (Adjustable orientation)

I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
25
Rating
0
P
PrintablesKatDelgado

Adjustable Phone Stand v2 (superseded)

( Update: please see https://www.printables.com/model/661034-adjustable-phone-stand-v3 for my latest design, that prints faster and works better. ) https://www.printables.com/model/644570-adjustable-phone-stand was my first phone holder.…

Print approx. €7.13–€8.72 excl. taxPreliminary estimate for one variant

Downloads
187
Likes
33
Rating
5
P
PrintablesmoWerk

Reinforced Broom Stabilizer Bracket | Heavy Duty Hexagon

Broom reinforcement brackets to stabilize the broom against lateral forces Improves overall stiffness of the broom Better durability for heavy duty work Hexagon style cut out Suits 20° angled broom handles, e.g. available here 5 common…

Print approx. €3.97–€4.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
176
Likes
84
Rating
4.5
P
PrintablesElias

Siku Palette Maßstab 1:32

Es handelt sich hier um ein Modell einer Europalette von SIKU im Maßstab 1:32.

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant

Downloads
167
Likes
9
Rating
0
P
PrintablesChris Ne

BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount

Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant

Downloads
165
Likes
14
Rating
0
P
PrintablesBaltz

IKEA - ALEX - adjustable leg

Mise à jour 2024-10-01 - Ajout du fichier paramétrique pour Fusion 360 pour la patte vissé Longueur total de la visse, Épaisseur du coussinets et son diamètre Update 2024-10-01 - Added the parametric file for Fusion 360 for the screw leg…

Print approx. €1.84–€2.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
152
Likes
28
Rating
5
P
PrintablesArtem

Adjustable rope shelf module

Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
195
Rating
5
P
PrintablesHank

Adjustable, Vertical Laptop Stand

Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports

Print approx. €6.13–€7.50 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
13
Rating
0
P
PrintablesIsaac Corbrey

Fully Parametric Phone Stand w/ Adjustable Angles, Widths, and Heights

Print Settings Rotate the model onto its side for layer strength. I used 15% triangular infill for my print, but if you need additional support increasing the infill should be fine. If all else fails, increase stand_thickness . Parameters…

Print approx. €6.59–€8.06 excl. taxPreliminary estimate for one variant

Downloads
122
Likes
21
Rating
5
P
PrintablesEnder

Passive Camera Stabilizer

This is a passive stabilizer for cameras. It was made mostly to make smooth stable video. Most parts are printed in petg at 0.20mm. The stabilizer model is printed in pla at 0.15mm this is for a little extra give. If the dove tails don't…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
54
Rating
4
P
PrintablesStrandedOrg

Adjustable Webbing Buckle with G-Hook

Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…

Print approx. €0.28–€0.35 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
116
Likes
21
Rating
0
P
Printablesbrad3n

Adjustable Corner Drill Guide - Infinitely Customizable, Parametric, No-Supports Needed

The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…

Print approx. €2.08–€2.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
107
Likes
50
Rating
0
P
Printablesthe_21_HER0

Moosstab Halbrund mit Selbstbeswässerung / Moss Pole half round with self watering system

Ich habe einen Moosstab entwickelt bei der man eine transparente Folie auf die Rückseite befestigen kann. Dadurch kann man die Wurzeln im Moosstab erkennen und gleichzeitig wird das Moos langfristig nass gehalten. ich habe die Folie…

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
21
Rating
0
P
PrintablesAngus B. Clark

NeverShut: Adjustable Door Safety Catch (Children's fingers)

An adjustable door safety catch that prevents your door from fully closing, saving thousands of children's fingers from being slammed in a door! Fits any standard 35mm thick door. To adjust the door opening, slide the device further along…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
91
Likes
54
Rating
0
P
PrintablesLuis

cross eurobox divider stabilizer / Kistentrenner Stabilisierer Kreuz Eurobox

I bought dividers for my storage boxes but they fitted quite loosely. So I designed this stabilizer to put on the crossing dividers so they stay at a 90° angle. At 100% this model fits for dividers with 3mm of strenth. I recomment…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
88
Likes
27
Rating
0
P
PrintablesChris Ne

BIKEMATE Adjustable bike light mount top V2

https://www.printables.com/de/model/473483-bikemate-adjustable-bike-light-mount-with-bikemate I would be very happy about a Make, Like or Share! Happy printing!

Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant

Downloads
87
Likes
10
Rating
0
P
PrintablesModellbau D

simple ajustable phonestand

ajustable phonestand with a strong fit. easy print, simple design :)

Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
3
Rating
4
P
Printableseof

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
81
Likes
7
Rating
0
P
PrintablesPincoyo

Adjustable height Resin Printer Vat Drainer / Support pour vider le bac d'imprimante à résine

Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…

Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
80
Likes
7
Rating
0
P
PrintablesJean GROSSMANN

Adjustable corner assembly press

This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…

Print approx. €9.14–€11.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
11
Rating
0
P
PrintablesTeslaactions

Adjustable wrench Print-in-Place For Mini

check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384

Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
14
Rating
0
P

Performax 12-Compartment Deep Adjustable Small Parts Organizer Bins

Bins for Performax 12-Compartment Deep Adjustable Small Parts Organizer sold at Menards. I wanted to get more spaces for parts I do not have a lot of. The bins are kind of deep so I use a magnet to retrieve magnetic items. Inside bottom…

Print approx. €4.54–€5.55 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
7
Rating
0
P
PrintablesJayS

Stabilo Woody 3in1 holder

A simple holder to store the 6 Stabilo Woody pens and make them easy accessable for kids.

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
5
Rating
0
P
Printablescrokobacon

Nozzle view cam adjustable mount for Raspberry Pi Camera (Circular and Square)

UPDATE : just made a new version with other adjustments. Now the cam is a little more in a back position than before. _________________________________ Hi all, I couldn't find a proper Pi camera mount with a real nozzle view so i made one…

Print approx. €1.14–€1.39 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
66
Likes
17
Rating
3
P
PrintablesPrints&Kinks

@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.

Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…

Print approx. €4.56–€5.57 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
64
Likes
6
Rating
0
P
PrintablesFoxLabs

Stable phone stand

This is a simple phone stand that can also hold Ipad. Print in place, and no supports hope you like it!!! I will make a new version at 20 downloads

Print approx. €1.91–€2.33 excl. taxPreliminary estimate for one variant

Downloads
64
Likes
8
Rating
0
P
PrintablesHans

Meterstabhalter

Meterstabhalter

Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
2
Rating
0
P
PrintablesAlvomane

Adjustable Grappling Hook | Verstellbarer Enterhaken

This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…

Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
61
Likes
7
Rating
0
P
PrintablesStrandedOrg

Adjustable Webbing Buckle with Clip Point

Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
9
Rating
0
P
Printablesprint by Matěj

Strap Tension Hook – Adjustable Strap Lock

This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
11
Rating
5
P
Printableshvrkh

Key Holder. Adjustable. No more rattling keys

The key holder, if you hate rattling keys this is ideal solution for you. You only need print the “full print model”. For assembly: (seven keys + one keyring) Bolt M3 16mm 3x + Nut M3 3x

Print approx. €1.32–€1.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
52
Likes
7
Rating
0
P
PrintablesKogaMiyata

Adjustable Wrench

This is only for fun and looks a lot like the real wrench, you can use it for employee of the month/year or just for fun. See examples for best result of printing. When the roll-pin is printed the supports are easy to peel with precision…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
48
Likes
6
Rating
0
P
PrintablesKonstisSFX

Ringlight mount for the Revopoint Handheld Stabilizer (POP and MINI Series)

For scanning Human heads I needed a even source of light. I have not had satisfactory results with fixed lighting as I need to be able to move around my model and then inevitably block some of the lights. On an intuition I used my cell…

Print approx. €3.37–€4.12 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
9
Rating
0
P
Printablesslayernine

Stable Two Part Base

Aside from the obvious solution of using prusa slicer to print this in two parts, I wanted to make something that can be separated and reattached many times. This is because I am planning to print many copies of this game to gift to…

Print approx. €1.30–€1.58 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
7
Rating
0
P
Printables3dprints4life

Beautiful simple and stable box 20x10x8 cm

A simple but beautiful box with dimensions 20 cm x 10 cm x 8 cm (length x width x height). The wall thickness is 2 mm. For that reason you will need some filament for printing. :) Due to round corners inside the box, the box is easy to…

Print approx. €7.88–€9.63 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
2
Rating
5
P
PrintablesWajpie

Adjustable table foot

long: 70 x 55,5 mm screew: 27 mm

Print approx. €4.12–€5.03 excl. taxPreliminary estimate for one variant

Downloads
46
Likes
12
Rating
0
P
PrintablesChorchie

GoPro Adjustable Chain Link Fence Mount

There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…

Print approx. €5.66–€6.92 excl. taxPreliminary estimate for one variant

Downloads
44
Likes
7
Rating
5
P
PrintablesGL3D

compostable-sprouting-pot-press with ejector

It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…

Print approx. €7.83–€9.57 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
9
Rating
0
P
Printablesspengineer

ADILS Stabilizer Brackets

These are clamp-on brackets for IKEA ADILS legs (or other 40mm tube legs) with holes to allow you to attach some planks or a piece of plywood across the legs, hopefully making them more stable and less wobbly. To be candid, I have tried…

Print approx. €1.66–€2.02 excl. taxPreliminary estimate for one variant

Downloads
38
Likes
5
Rating
4
P
PrintablesKohei

Milsig M79 Barrel Stabilizer

This was made in like 15 minutes in photoshop then exported to tinkercad. I've tested it with Frontline Foam's and Spectre's M79 barrel adapters with Monkee mods threaded jet blaster barrels, and both work fine. I intentionally made the…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
0
Rating
0
P
PrintablesMatthew

Adjustable endstops for Prusa XL

This is a simple mod that assists in keeping your corexy gantry square. NOTICE Installation of this mod requires that you re-tune your coreXY belts. If you are not comfortable with this process then DO NOT PROCEED . I recommend that you…

Print approx. €3.27–€4.00 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
16
Rating
0
P
PrintablesEmilH

Ajustable Gear Fidget

Print all the pieces. Assemble the pieces. Move the gears together. Tighten the nuts (½ inch driver socket recommended).

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
8
Rating
5
P
PrintablesJesseW3D

Gillette Fatboy Adjustable Safety Razor Stand

I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…

Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
7
Rating
0

Schreibtisch "Mathias"(maßstabsgetreu)

© Timo Schulz - [Timos Bilder](https://www.timos.pics) **Echte deutsche Möbel von Hand vermessen und digitalisiert** Dieser große Eckschreibtisch bietet viel Platz für Büroutensilien. Selbst und ein Computer mit ein klobigen Röhrenmonitor…

Print approx. €17.57–€21.48 excl. taxPreliminary estimate for one variant

Downloads
33
Likes
9
Rating
0
P
PrintablesDvG3DAtelier

Dust Filter for Core One Vents – Reinforced Remix with Dovetail Connection / Staubfilter für Core One Lüftungsschlitze – stabiler Remix mit Schwalbenschwanz-Verbindung

This remix of the Prusa Core One dust filter offers a sturdier and more user-friendly solution for the vent openings. Improvements over the original design: Reinforced cover construction for better durability Increased clearance between…

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33
Likes
13
Rating
5
P
PrintablesRo3Deee

Adjustable PrusaXL Front A1 Wipers with G-code

Check out the magnetic version : BOM PETG T spring nuts M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or 3d printed nuts for 3030 for M3 screws M3 screws - 10 mm - https://a.aliexpress.com/_EHrTBG4 A1 silicone brush -…

Print approx. €1.03–€1.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
5
Rating
0
P
PrintablesRainer

Pflanzstabhalterung

Die Rankhilfe dient zur Fixierung eines Pflanzstabs. Sie wird am Blumentopfrand als Klammer fixiert und der Pflanzstab durch die Bohrung dieser Klammer geschoben. Man kann somit beliebig viele dieser Klammern am Topfrand befestigen und…

Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
30
Likes
3
Rating
0
P

RC Drift car holder with adjustable lifting height- Držák na RC driftové autíčko s nastavitelnou výškou zdvihu

---CZE--- Ahoj všichni Pokud máš rád rc autíčka tak jsi tady správně navrhl jsem tento otočný samojistící držák na jakýkoliv rc podvozek. na složení budeš potřebovat 4 kusy m3 x 30mm šrouby 4 kusy m3 matic a 1 kus m6 x 60mm. šroub m6 x…

Print approx. €7.54–€9.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29
Likes
10
Rating
0

kleiner schlichter Badezimmerschrank (maßstabgetreu)

**Echte deutsche Möbel von Hand vermessen und digitalisiert** Ein schlichter Badschrank der überall in ein modernes Diorama passt **Version** Massiv *Erläuterung* Objekt ist innen massiv. Im Slicer erzeugt es im Inneren eine Füllung. Ein…

Print approx. €3.68–€4.49 excl. taxPreliminary estimate for one variant

Downloads
28
Likes
2
Rating
0
P
PrintablesAlvomane

Adjustable VESA 200 TV/Monitor E27 LED-Lampholder | Verstellbarer VESA 200 Fernseher E27 LED-Lampenhalter

This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…

Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
27
Likes
11
Rating
0
P
PrintablesPm7

Stabilo Organizer 10 units Align

Add a new component to the original model to align the Stabilos. I hope you like it!

Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant

Downloads
26
Likes
3
Rating
5
P
PrintablesHans

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
22
Likes
1
Rating
0
P
PrintablesO. Knode

Kleine Säule zur Unterstützung Bienen Beute / Adjustable Column for bee hive entrance

Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…

Print approx. €1.33–€1.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
21
Likes
3
Rating
0
P
PrintablesBrian Walczak

Adjustable Payment Terminal Stand/Mount for Countertop

This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…

Print approx. €1.58–€1.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
0
Rating
0
P
PrintablesNickeyTheBlade

Z Stabilizer

https://www.printables.com/model/343400-sovol-sv06-top-z-bearings/comments BEST ADVICE OUT THERE!!! So, I got one of the ChowThink rail upgrade kits for an Ender 3 and love it. Doing some routine maintenance, it looked like it was time to…

Print approx. €1.26–€1.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
20
Likes
3
Rating
0
P
PrintablesDesmodromic

Flea Ukulele Holder for Uplift Adjustable Desk

I designed this convenient under-desk hanger for my Flea Ukulele, below my Uplift adjustable desk. The Uplift desk frame has many extra holes available so I decided to take advantage of them to store things somewhat out of sight. Check my…

Print approx. €2.45–€2.99 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
6
Rating
0
P
PrintablesM

Giesse Adjustable Terminal 02167 "French Door Locking Pin"

French Door locking pin Manufacture/mode: Giesse 02167 Notes: Used as the top & bottom locking pins for French doors, swing doors, typically exterior doors. You may see this part in Eurotech French Doors. 3D Print Notes: - Material Type:…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
1
Rating
0