P
PrintablesVC Design
Adjustable Feet - Strong
Closed feet height = 50 mm Extended feet height = 80 mm Tested with PLA: 0,15 layer height; 15% infill => 75+kg load per feet was no problem :)
- Downloads
- 10,874
- Likes
- 5,377
- Rating
- 4.87
Search results: stable
4,772 models
P
PrintablesSquidgyPlastic
Adjustable Airplane Phone Holder
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
- Downloads
- 6,145
- Likes
- 1,651
- Rating
- 4.59
P
PrintablesSneaks
Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware
Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…
- Downloads
- 5,173
- Likes
- 1,032
- Rating
- 4.94
P
PrintablesBodo
Cableclips - Bistable Compliant Mechanism
Changelog 2024-12-21 v1.1 fine tuned print settings; cc 0.17; ct 0.18 2022-12-02 v1.0 initial public release Neatly organising the world of cables has lost a lot of hassle with these reusable cableties: The bistable mechanism quickly…
- Downloads
- 3,215
- Likes
- 1,551
- Rating
- 4.84
P
PrintablesPetr Vacek
Adjustable Bed Frame Leg
You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. 0.3mm, rPETG, 5h.
- Downloads
- 2,907
- Likes
- 843
- Rating
- 5
P
PrintablesFabianVeile
Ultra Thin Pen (Bistable Compliant Mechanism)
Hello, this is my pen based on a bistable compliant mechnism. It is very thin (3 to 5 mm) and works with a standard BIC refill ( BIC Cristal). Its center of mass is located (approx.) on the first contact surface (seen from the actuating…
- Downloads
- 2,455
- Likes
- 818
- Rating
- 4.38
P
Printablestestudor
Height-Adjustable Extension Feet for Lack Tables
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
- Downloads
- 2,425
- Likes
- 1,192
- Rating
- 5
P
PrintablesKuban66
Furniture adjustable leg
Furniture legs with two heights to choose, 25mm adjustable to ca. 35mm and 55mm to ca. 80mm. (I recommend checking out the redesigned model on my profile with more heights available and improved threads)…
- Downloads
- 1,969
- Likes
- 211
- Rating
- 4.6
P
PrintablesPeter Farell
Nativity: Stable
Nativity: Stable with thatched roof and covered supplies. Split - Gule together sections. or use the version that is complete to resize to your liking.
- Downloads
- 1,942
- Likes
- 381
- Rating
- 4.67
P
Printablesquattro
Adjustable Perfect Desktop Fan Stand (for 120 and 140mm fans)
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
- Downloads
- 1,570
- Likes
- 478
- Rating
- 4.8
P
PrintablesRossero
Adjustable Curve Sketcher
Trying to copy or sketch larger curves and contours? Try my Flexible Contour Duplicator : Lacking the steady hand to sketch the perfect curve? Always starting your curve with confidence only to miss the end mark of the sketch line? Worry…
- Downloads
- 1,401
- Likes
- 1,336
- Rating
- 4.69
P
PrintablesWill
Can Dispenser Adjustable XL no support
Wanted a single piece print for the can dispenser, and just placing the parts together in prusaslicer was leaving wall lines in the part where the connectors were, so reworked it in fusion to make each side be a single part with no…
- Downloads
- 1,366
- Likes
- 622
- Rating
- 5
P
PrintablesAUGU5TO
Modular Gravity Tool Holder – Adjustable, Reinforced & T-Nut Mountable (Remix)
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
- Downloads
- 1,208
- Likes
- 1,006
- Rating
- 4.75
P
PrintablesThe Kit Card Guy
Stable floating Benchy with Cargo, Smoke and Flag (Multicolor Version)
Summary Do you love Benchys but are frustrated because they don't float in water? Do you want to print your child a cool Benchy for the bathtub? Here is the stable floating Benchy with cargo containers, smoke and flag in a multicolor…
- Downloads
- 1,179
- Likes
- 224
- Rating
- 5
P
Printablescq
Cog Laptop Stand - Adjustable angle
An adjustable Laptop Stand, the cog part clicks into the base at the angle you want the base of your laptop to be. I designed this for a work mate who performs online training seminars so wanted to have their laptop camera at a high…
- Downloads
- 975
- Likes
- 137
- Rating
- 4.83
P
PrintablesMateo Van Damme
Adjustable tablet stand
The tablet stand is foldable and print-in-place. It fits perfectly on the 18x18cm build volume of the Prusa Mini+. With a .2mm layer height it took 8 hours on my machine. Printing A little support material is needed only for the teeth on…
- Downloads
- 941
- Likes
- 81
- Rating
- 4.71
P
PrintablesMW
Adjustable Wireless charging dock / Ikea Livboj / Powerwave / Anker / Nillkin
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
- Downloads
- 923
- Likes
- 141
- Rating
- 4.87
P
PrintablesHugo
Moonlander adjustable tenting kit that folds flat
This is largely inspired by https://www.thingiverse.com/thing:5028257 by kageii Features This is a stand that achieves a steeper angle then the original feet, while allowing the thumb cluster to stay at any angle. It can also fold…
- Downloads
- 851
- Likes
- 94
- Rating
- 5
P
PrintablesNLarson
Adjustable laptop, tablet, and document stand
This is a multi-purpose adjustable stand for laptop computers, tablets, and other items. The project came about when being forced to work from home in the Covid-19 pandemic. Its configuration is very flexible, being tilt adjustable from…
- Downloads
- 815
- Likes
- 250
- Rating
- 4.93
P
PrintablesFabianVeile
Bistable Compliant Keychain Gripper
Hi, this is a tiny but functional bistable compliant robot gripper. It's some kind of simplified version of my other Keychain Gripper . It's great for fidgeting or tinkering around with bistable mechanisms. In its initial position the…
- Downloads
- 799
- Likes
- 127
- Rating
- 4.81
P
PrintablesGoyetus
Prusa mk3 Y axis Adjustable Belt Tensioner and BED Holder with Paralelism and compatible with other Mods
This version is a remix from the 2019 original from Thingiverse. https://www.thingiverse.com/thing:2786671/files I made an effort to upgrade and remix it cause I Think this is easy, and far away, the best Y-Tensioner Mod for prusa. Only…
- Downloads
- 747
- Likes
- 179
- Rating
- 4.86
P
Printablesslurpee03
Adjustable Stand for Smartphones
I really enjoyed Sneaks' wonderfully designed Adjustable Stand and how well it works for tablets. Wanting a smaller version that fits for my phone, I scaled down the parts, removed material from the bases, and slightly modified the hooks.…
- Downloads
- 700
- Likes
- 109
- Rating
- 4.78
P
PrintablesVinceCZ
Kywoo3D Adjustable Phone/Tablet Holder - print-in-place
Superb Adjustable Phone Holder, originally made and distributed on SD card with Kywoo3D printers. You can scale it as you see fit, for example around 200 % should be enough for iPads. lower paws are wide enough to hold phones even with a…
- Downloads
- 521
- Likes
- 55
- Rating
- 5
P
PrintablesJadozub
CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes
I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…
- Downloads
- 451
- Likes
- 68
- Rating
- 0
P
PrintablesNiH
Soldering iron add-on for 'Adjustable PCB Holder Tool'
Simple add-on to hold a Pinecil type soldering iron when working with the adjustable pcb holder tool from @squinn. Snaps in to the cutout in the legs of the holder, can be mounted on either side for right or left hand use. Designed to use…
- Downloads
- 450
- Likes
- 269
- Rating
- 4.67
P
PrintablesDaHouzKat
Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
- Downloads
- 433
- Likes
- 209
- Rating
- 4.89
P
Printableszuberio
Print-In-Place Adjustable Folding Phone Holder
An easy to print-in-place phone holder/stand with 3 possible angles for the phone. Please note that the STL includes first-layer ‘tabs’ between separate small parts that need to be broken/cut post-print.
- Downloads
- 398
- Likes
- 61
- Rating
- 4.5
P
PrintablesFabianVeile
Bistable Compliant Robot Gripper
Hi, this is a prototype of a bistable compliant robot gripper. Each side can be actuated individually by sliding the actuator in the centre. It is still in an early stage and will change in future versions. Its dimensions are approx: 42 x…
- Downloads
- 384
- Likes
- 84
- Rating
- 4.9
P
PrintablesZhero
Bistable Fidget Button Compact
This is a remix of this model What I modified: Top Mod (see images): From Top.3mf Added the carved path of the arm Reduced the lower part to avoid scratching with the Arm Bottom Mod (see image) : From Bottom.3mf Added the carved path of…
- Downloads
- 380
- Likes
- 31
- Rating
- 4.5
P
PrintablesjonnieZG
VESA Adjustable Riser
Adjustable VESA riser for monitors that allows you to rise or lower your monitor up to 75mm. Convenient for wall-mounted monitor stands that do not have height adjustment. Depending on your monitor model and the way how the cables are…
- Downloads
- 302
- Likes
- 32
- Rating
- 5
P
Printablescoltale
Adjustable Bottle Opener
An adjustable PET bottle opener that can be used to make easier to open almost every kind of PET bottle caps. The joint makes it very strong, grippy and simple to use! Print in place , no supports needed. Hope you like it!
- Downloads
- 294
- Likes
- 29
- Rating
- 4.67
P
PrintablesMildly_Admirable
Adjustable sternum/chest strap attachment
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
- Downloads
- 288
- Likes
- 100
- Rating
- 5
P
Printablescover1012
Stable and adjustable VESA 100 monitor mount
Printing instructions: PETG Layers: 0.2mm Infill: 40% Perimeters: 6 For protection and better grip, you should attach self-adhesive felt to the back of monitor_connection_part_1 .
- Downloads
- 276
- Likes
- 61
- Rating
- 5
P
PrintablesXenGi
IKEA Vidga corner piece (adjustable angle)
I needed a 45°/135° angled IKEA Vidga corner piece but IKEA only sells 90°. So I created an OpenSCAD model where you can set any angle you want. Adjust angle and radius in OpenSCAD file Printable with minimal supports. Use brim
- Downloads
- 274
- Likes
- 19
- Rating
- 5
P
PrintablesSdewe
Height-adjustable clamping claws
The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…
- Downloads
- 270
- Likes
- 124
- Rating
- 5
P
PrintablesBurgessG
Horizontal Baseball Bat Holder / Adjustable
I needed to mount some custom built baseball bats in my office but I didn't have enough “top down” space. Since width wasn't a problem I designed these hangers that use the weight of the bat and leverage to keep everything in place. The…
- Downloads
- 254
- Likes
- 58
- Rating
- 0
P
PrintablesLukasz M
Stable Laptop stand for macbook pro 13"
The stand does not interfere with working on a laptop. project with space for slip rubbers. Can be used with laptop case. Sugestion: Infill: 10-15% Honeycomb without top space on sides Inspired by…
- Downloads
- 247
- Likes
- 29
- Rating
- 5
P
PrintablesDaHouzKat
Original Prusa Enclosure Left Filament Guide and Adjustable Thermometer Bracket Combo
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
- Downloads
- 208
- Likes
- 72
- Rating
- 5
P
Printablesnanselm
DIN Mount for Arduino Uno (Adjustable orientation)
I wanted a DIN mount for my Arduino Uno that was: easy to print quick to assemble adjustable and doesn't need any extra standoffs So I developed my own in OnShape. The clips can be adjusted so that the mount can face in any four…
- Downloads
- 193
- Likes
- 25
- Rating
- 0
P
PrintablesStillpointx
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter snap case / holder / knob
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
- Downloads
- 182
- Likes
- 19
- Rating
- 5
P
PrintablesChris Ne
BIKEMATE Adjustable bike light mount with Bikemate Mount / Justierbare Fahrradlicht - Halterung mit Bikemate Mount
Edit V2 28.7.2023: Eine bessere Version des Oberteils wurde mit besserer Passung und stabileren Hebel hinzugefügt. A better version of the top has been added with a better fit and more stable lever. I built a new bike light mount for my…
- Downloads
- 165
- Likes
- 14
- Rating
- 0
P
PrintablesMarkus Richert
Furniture footings height adjustable
All footings come in two parts, one basic footing and one screw to adjust the height. The screw has a M15x20 mm thread so height adjustment can be done around 15 mm. You will also need a 4mm screw to attach the foot to your furniture…
- Downloads
- 158
- Likes
- 26
- Rating
- 5
P
PrintablesDaveDude
Adjustable cap to close openings and holes self-holding (e.g. sink) / Verschluss für Öffnungen
Sometimes you just have a whole that needs to be covered. Easy solution. Use this print, re-size it and done! For me it was a little gabe in my sink that annoyed me for years…finally i fixed it and was wondering how many of you just need…
- Downloads
- 148
- Likes
- 13
- Rating
- 5
P
PrintablesArtem
Adjustable rope shelf module
Adjustable rope shelf module A small module for an easy hanging shelf on a rope How to use ? You will need a M6 screw for block the rope into the module, you can lose the screw a little for adjusting the position
- Downloads
- 145
- Likes
- 195
- Rating
- 5
P
PrintablesRob Latour
Adjustable case / stand for a Lilygo T-Display S3
This model is sized for the Lilygo T-Display S3-display, not the Lilygo T-Display-S3 AMOLED device which is slightly narrower. If you're interested in the model for the AMOLED device it is available here . Required: a Lilygo T-Display-S3…
- Downloads
- 144
- Likes
- 15
- Rating
- 0
P
PrintablesZelrick
Z42 Prusa Mini Narrow Side Spool Holder Adjustable Height
For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…
- Downloads
- 142
- Likes
- 35
- Rating
- 5
P
PrintablesHank
Adjustable, Vertical Laptop Stand
Adjustable stand to hold laptops in vertical position for storage or use with a separate monitor. Build Info: PLA 0.3 layer height 2 perimeters / 30% In-fill/no supports
- Downloads
- 135
- Likes
- 13
- Rating
- 0
P
Printablessdychung
Tablet/phone stand - adjustable tilt and sturdy
Adjustable tablet or large phone stand to help with centering your face on video chats. Stand has 5 adjustable positions ranging from 45º to near vertical. Wide base ensures the stand is very tip resistant in any position. The stand…
- Downloads
- 128
- Likes
- 19
- Rating
- 5
P
PrintablesREMLURELMI
Adjustable Cubicle Coat Hook
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: Yes, for holes Support Type: Organic/Tree Supports Print Orientation: Default as modeled Raft: Optional Brim: Optional The fastener…
- Downloads
- 124
- Likes
- 17
- Rating
- 0
P
PrintablesStrandedOrg
Adjustable Webbing Buckle with G-Hook
Webbing Adjuster for securing straps and a g-hook to connect to additional webbing. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is slightly…
- Downloads
- 116
- Likes
- 21
- Rating
- 0
P
Printablesamazing
Adjustable Bottle and Glass Name Tag
Adjustabel name tag for your bottle (beer or any other favourite drink) or glass. No more mix-up or confusion enjoying a nice drink with your friends! Use FreeCAD to parametize the model by changing the sheet Parameters as shown at the…
- Downloads
- 112
- Likes
- 22
- Rating
- 0
P
Printablesbrad3n
Adjustable Corner Drill Guide - Infinitely Customizable, Parametric, No-Supports Needed
The Adjustable Corner Drill Guide offers precise drilling for corners. It's parametric, customizable, and prints easily without supports. Features: Fits 1-8mm drill sizes Current files fit 2, 3.25, 5, and 6 10mm spaced holes for accuracy…
- Downloads
- 107
- Likes
- 50
- Rating
- 0
P
PrintablesBamBam Design
Ultra Stable Mod for Windmill
This mod changes the axle and the rod of my Windmill Designs to a horizontal print! You can print now all parts horizontal with a press fit connection, to make the whole Windmills "ultra stable". Assembly:…
- Downloads
- 94
- Likes
- 22
- Rating
- 0
P
PrintablesChris Ne
BIKEMATE Adjustable bike light mount top V2
https://www.printables.com/de/model/473483-bikemate-adjustable-bike-light-mount-with-bikemate I would be very happy about a Make, Like or Share! Happy printing!
- Downloads
- 87
- Likes
- 10
- Rating
- 0
P
Printableseof
Nestable Organizer Trays for small Parts / Verschachtelbare Ablagen für kleine Dinge
Trays to deposit small parts (screws, pearls, etc)
- Downloads
- 81
- Likes
- 7
- Rating
- 0
P
PrintablesPincoyo
Adjustable height Resin Printer Vat Drainer / Support pour vider le bac d'imprimante à résine
Large support for perfect stability without adding extra weight. Height is adjustable using pre-drilled holes with m4 screws. For North Americans, the sliding foot can be replaced by a 2 "x2" wooden one, cut to your requirements. The…
- Downloads
- 80
- Likes
- 7
- Rating
- 0
P
PrintablesJean GROSSMANN
Adjustable corner assembly press
This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…
- Downloads
- 78
- Likes
- 11
- Rating
- 0
P
PrintablesTeslaactions
Adjustable wrench Print-in-Place For Mini
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
- Downloads
- 75
- Likes
- 14
- Rating
- 0
P
PrintablesMK Design
Adjustable Spool Holder MK
Adjustable spool holder. Stepless / continuous width adjustment from ca. 30mm to 90mm. Assembly according fotos. Stationary parts are fit but glue ir recomended. Additional assembly parts: 1pcs. Screw M4x12 2pcs. Screw M4x16 with…
- Downloads
- 74
- Likes
- 15
- Rating
- 4.5
P
PrintablesDarkwing Druck
Adjustable Door Lifter
Adjustable door lifter for installing and lubricating hinges on doors.
- Downloads
- 70
- Likes
- 12
- Rating
- 4.67
P
PrintablesPrints&Kinks
@Cherry_Labs "Unique print in place laptop stand - Super portable - Adjustable angles" remix for 16” MacBook Pro (2023) or 14.29mm thick laptops.
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
- Downloads
- 64
- Likes
- 6
- Rating
- 0
P
PrintablesFoxLabs
Stable phone stand
This is a simple phone stand that can also hold Ipad. Print in place, and no supports hope you like it!!! I will make a new version at 20 downloads
- Downloads
- 64
- Likes
- 8
- Rating
- 0
P
PrintablesAlvomane
Adjustable Grappling Hook | Verstellbarer Enterhaken
This is an adjustable grappling hook whose hooks can be adjusted in angle and fixed with an insertable plug. There are thin and slightly larger hooks as well as the step files for your customisations. Print the centre part of the…
- Downloads
- 61
- Likes
- 7
- Rating
- 0
P
PrintablesPeter C
Golf - Putting Aid - Adjustable Putting Gate (50 - 75mm)
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
- Downloads
- 58
- Likes
- 5
- Rating
- 0
P
PrintablesStrandedOrg
Adjustable Webbing Buckle with Clip Point
Webbing adjuster with a clip point for securing straps or to connect to additional objects. It is used as adjusters on backpacks straps, rucksack, luggage, harnesses, leashes, collars etc. Printing Suggestions: organic supports (it is…
- Downloads
- 55
- Likes
- 9
- Rating
- 0
P
Printablesprint by Matěj
Strap Tension Hook – Adjustable Strap Lock
This strap tension hook allows you to securely tighten a strap by threading it through two lower slots and looping it back. The strap is locked by hanging it on the upper hook, creating tension without the need for a traditional buckle.…
- Downloads
- 54
- Likes
- 11
- Rating
- 5
P
Printableshvrkh
Key Holder. Adjustable. No more rattling keys
The key holder, if you hate rattling keys this is ideal solution for you. You only need print the “full print model”. For assembly: (seven keys + one keyring) Bolt M3 16mm 3x + Nut M3 3x
- Downloads
- 52
- Likes
- 7
- Rating
- 0
P
Printables3dprints4life
Beautiful simple and stable box 20x10x8 cm
A simple but beautiful box with dimensions 20 cm x 10 cm x 8 cm (length x width x height). The wall thickness is 2 mm. For that reason you will need some filament for printing. :) Due to round corners inside the box, the box is easy to…
- Downloads
- 47
- Likes
- 2
- Rating
- 5
P
PrintablesThommyfix
Paracord shackle with adjustable width
Supplement to adjust the width of the bracelet with the shackle from mobiobi. Download the shackle at mobiobi directly. The extension can be printed without support and border. Preferred material is PETG or PC
- Downloads
- 45
- Likes
- 8
- Rating
- 5
P
PrintablesChorchie
GoPro Adjustable Chain Link Fence Mount
There are several chain link fence camera mounts, but none worked exactly as I wanted, so I created my own. I needed a GoPro mount that I could use to hold my camera on the fence to record and stream my son's little league games. This one…
- Downloads
- 44
- Likes
- 7
- Rating
- 5
P
Printablestom
Sortierkiste mit Schnappverschluss und variablen Einsätzen/ Sorting box with snap closure and adjustable dividers
Dies ist eine Sortierkiste mit Schnappverschluss und verschiedenen Einsätzen. Somit kann die benötigte Fachgröße einfach zusammengestellt werden. Die Einsätze haben eine innere Höhe von 25 mm sowie eine Breite und Länge in einem Rastermaß…
- Downloads
- 41
- Likes
- 7
- Rating
- 5
P
PrintablesTec
Simple stackable box (adjustable) / Jednoduchá stohovatelná krabička (upravitelná)
Stackable box with adjustable size and design. NEW: Box cover model added. Some basic possibilities of design modifications: 2 models included - with and without cutout on shorter side NEW: 1 model of box cover added - you can apply the…
- Downloads
- 39
- Likes
- 4
- Rating
- 0
P
Printablessiljelb
Prusa Core One/+ Squash Ball Feet with parametrically adjustable height
Remix of the excellent squash ball feet for the Prusa Core One/+ by @dancan13f . The original creator recommends using squash balls with blue dot as they are the hardest. You will need one M3x6MM screw per foot to fasten it to the Core…
- Downloads
- 39
- Likes
- 9
- Rating
- 5
P
PrintablesIceburn
Adjustable Bobbin Storage Box with Magnetic closure
This is a remix on a bobbin storage box. I initially printed that box, but my wife immediately snapped of the latch. So, I remixed it to use a magnetic latch instead. The hinge pin is just filament. Just press a length of filament through…
- Downloads
- 39
- Likes
- 7
- Rating
- 5
P
PrintablesGL3D
compostable-sprouting-pot-press with ejector
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
- Downloads
- 39
- Likes
- 9
- Rating
- 0
P
PrintablesJesseW3D
Gillette Fatboy Adjustable Safety Razor Stand
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
- Downloads
- 34
- Likes
- 7
- Rating
- 0
P
PrintablesCHrisPunisher218
RC Drift car holder with adjustable lifting height- Držák na RC driftové autíčko s nastavitelnou výškou zdvihu
---CZE--- Ahoj všichni Pokud máš rád rc autíčka tak jsi tady správně navrhl jsem tento otočný samojistící držák na jakýkoliv rc podvozek. na složení budeš potřebovat 4 kusy m3 x 30mm šrouby 4 kusy m3 matic a 1 kus m6 x 60mm. šroub m6 x…
- Downloads
- 29
- Likes
- 10
- Rating
- 0
P
PrintablesAlvomane
Adjustable VESA 200 TV/Monitor E27 LED-Lampholder | Verstellbarer VESA 200 Fernseher E27 LED-Lampenhalter
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
- Downloads
- 27
- Likes
- 11
- Rating
- 0
P
PrintablesO. Knode
Kleine Säule zur Unterstützung Bienen Beute / Adjustable Column for bee hive entrance
Kleine Säule um z.B. im Eingang von Bienenbeutenkästen Wetterschutzvordächer anzubringen als Schutz vor Regen um die Einfluglöcher trocken zu halten. Oder für schmale Unterstützungsprojekte. Zwei Varianten eine mit glatter Oberfläche eine…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesBrian Walczak
Adjustable Payment Terminal Stand/Mount for Countertop
This model is a fully adjustable counter mount designed for payment terminals and similar devices. It features a 310° base rotation and uses a friction tilt hinge, allowing you to tilt your device at any angle - just tighten or loosen a…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesStephan Küffner
Dell Projector Adjustable Base
I have made an adjustable foot for the front mount of my Dell Beamer M210X. The mount is a perfect fit and can be adjust Printed with PETG, also works with PLA Support necessary Infill at 100%
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
Printablesmelted_idiot
Halter für Messtabletten und Küvetten
Halter / Ständer für Mess-Tabletten, Küvetten und Stössel. Für ein Photometer zur Wasseranalyse in der Bädertechnik. Die Stellfläche für die Küvetten und Deckel ist durch das Gitter und auch im unteren Bereich von vorne und hinten…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesHandy Handcrafts
Adjustable and Collapsable Dowel Display Rack/Stand
Here is a great way to add a support to a display board. We are using this to display my daughters necklaces, but you can use this to display or organize you collections or sales items. We even added a clip to keep a 1" or 25mm barbell…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesExtra Fox
Adjustable Feet for Sorbothane Dampers
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesGert-Jan
ACME NUT - Adjustable Bed Part for Kbed and Hästens
I made a ACME replacement nut for a Hästens adjustable bed. It should also fits a Maxwell Kbed. Print the model solid otherwise it might not be strong enough.
- Downloads
- 10
- Likes
- 0
- Rating
- 5
P
PrintablesVictor
Solder Scroll - Ergonomic, Adjustable Solder Tool
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
- Downloads
- 54,628
- Likes
- 17,744
- Rating
- 4.88
P
Printableshappymaker
Adjustable Height Support
It is a simple mechanism that provides column-like support for structures that require it. The support has a dynamic height that can be adjusted in place of use to lock it. To change the support height, fix it with your hand on a surface…
- Downloads
- 26,595
- Likes
- 13,203
- Rating
- 4.95
P
PrintablesJoão Hackbart
Stable Flyer VI - Small Toy Glider
NOTE: After reading this paper on the effect of Tail Dihedral on stability, and experimenting on my design, it seems that it is a great idea to angle the Horizontal Stabilizer into a negative dihedral (anhedral). Or in other words, for…
- Downloads
- 23,137
- Likes
- 3,867
- Rating
- 4.63
P
Printablessquinn
Adjustable PCB Holder Tool
A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping…
- Downloads
- 22,117
- Likes
- 7,543
- Rating
- 4.92
P
Printableshumebeam
Adjustable Spool Holder for Silica Gel / Spool Weight
Update A loading funnel is now available as well, download it here ! Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me…
- Downloads
- 17,475
- Likes
- 3,009
- Rating
- 4.95
P
PrintablesGiskardReventlov
Adjustable Monitor shelf - Fits any display: curved back, thin bezel, laptop, or TV.
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
- Downloads
- 16,046
- Likes
- 4,013
- Rating
- 4.88
P
Printablespb-tec
Customizable parametric stable and waterproof electronics ip65 ip67 project box enclosure case housing
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
- Downloads
- 13,637
- Likes
- 1,539
- Rating
- 4.94
P
PrintablesTheHamburglar
Adjustable drill angle guide
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
- Downloads
- 6,338
- Likes
- 2,962
- Rating
- 4.63
P
PrintablesRCMakerLab
Super Stable Bench Drill For PCB. 3D DIY Bench-Drill For Hobby Workbench.
Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…
- Downloads
- 5,753
- Likes
- 898
- Rating
- 5
P
Printablesjq910
0.8mm thin adjustable credit card phone stand
Edit 5/18: Changed license to comply with the original Edit 7/4: Added additional folding parts for rigidity and improved clearances. Very thin folding phone stand that can slip into a wallet or the back of a phone case. Works fine with…
- Downloads
- 5,564
- Likes
- 577
- Rating
- 4.85
P
PrintablesConr8r
Upgraded Modular Hydroponics Tower - More Compact & Stable
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
- Downloads
- 5,381
- Likes
- 1,548
- Rating
- 4.89
P
Printablesap.engineering
Adjustable Notebook/Laptop Stand - Foldable / Print-in-Place
This is a stylish laptop stand that allows you to use the computer at 4 different angles but also allows you to completely fold it for easier storage and transportation. Print two pieces and place them underneath your laptop. You can…
- Downloads
- 5,350
- Likes
- 418
- Rating
- 4.53
P
PrintablesTunantero
Multipurpose legs, adjustable in height and angle
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
- Downloads
- 5,139
- Likes
- 3,253
- Rating
- 4.87
P
PrintablesVC Design
Adjustable Feet - Strong
If you want to support me you can now nominate me and my designs for the Printables Awards 2025! :) Height-Adjustable Feet with Ball Joint — M20×2 Thread (Heavy-Duty, 75 kg Load Tested) These height-adjustable feet are designed for…
- Downloads
- 5,035
- Likes
- 2,886
- Rating
- 4.79