Search results: stacked

Sort order

226 models

P
PrintablesElectroHawk

Stacked Honeycomb part for FDM

I stacked 10 of the original honeycomb wall part on top of each other and separating them with a thin layer gap for easy separation. I also used ironing on each layer to make the separation of the pieces easier. The piece is turned upside…

Downloads
634
Likes
102
Rating
5
P
Printablesishikawats

Playing Card Holder for 2 Stacked Decks

Simple model to hold 2 decks of playing card whose original box is missing. Lid snaps in place and has a clover (clubs) decoration. Internal height is 33 mm. There is a remix for single deck:…

Downloads
269
Likes
30
Rating
5
P
PrintablesCooler Master

Double 3.5" Stacked Hard Drive mount - Compatible with 3.5" storage drives

A quick and effective way to mount one hard drive on top of another, perfect for cases with a single HDD mounting slot. Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P as well as all Elite 501 and 301/2 Cooler Master…

Downloads
137
Likes
18
Rating
0
P
PrintablesCoronaSolved

Prusa Faceshield 0.8mm Stacked 4pcs/print - WORK IN PROGRESS!

We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle. THE VERSION IS…

Downloads
124
Likes
2
Rating
0
P
PrintablesJohannes

Stacked Donut Planter (hidden drip tray, no support)

This stacked donut planter combines a modern and simple design with an easy-to-print, no-support-needed, hidden drip tray. Available in four tested sizes (9 cm, 11 cm, 13 cm, and 15 cm), it caters to a variety of plant needs. While the…

Downloads
36
Likes
17
Rating
0
P

Stackable /Stacked LEGO Brick Sorter / Sorting Box (Updated & Mini Version)

Newest Edit: 6-10-2024 New version follows the same concept as before but now the lid closes completely in both stacked and unstacked positions. Plus rounded edges for the little ones. Includes faster print time (albeit still takes a fair…

Downloads
6,947
Likes
794
Rating
4.83
P
PrintablesPrusa Research

Prusa Face Shield - US stacked

Stacked version of the Prusa Face Shield - US version (RC3 version) A prototype face shield that we developed. This is a version for the US based on the community feedback, the design was adjusted to fit: American size sheet (11x8,5…

Downloads
6,331
Likes
40
Rating
4.55
P
PrintablesClough42

Gridfinity Grids - Stacked for Printing

This is a Fusion template for creating stacked gridfinity grids. These grids are symmetrical top-to-bottom, so they stack easily. Use Modify→Change Parameters to change the size of the grid and the number to stack. Grids are stacked with…

Downloads
2,924
Likes
258
Rating
5
P
PrintablesYardboy

Stacked HSW Wall Panels 2/4/6/8x211x248

These are 2-, 4-, 6-, and 8-stack versions of the HSW 211x248 wall panel. Print at 0.28 layer height with 5+ perimeters to avoid infill. There is a one-layer separation between each panel. Import the STEP file to your slicer, split the…

Downloads
2,477
Likes
787
Rating
3
P
Printables3D Design HK

HSW stacked print

I created the stacked version of the HSW for print with less downtime. The total print length is 9,5h on Bambulab X1E with AMS on normal speed settings. DON'T change the settings. Use Support for PLA filament or water soluble filament for…

Downloads
2,113
Likes
309
Rating
2.67
P
Printablesaiber

Stacked wave spring

Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…

Downloads
1,652
Likes
109
Rating
5
P
PrintableshrafX

Stacked Skulls Sculpture

For FDM printers Supports: Yes (organic) Raft: Doesn't matter Nozzle: 0.4 Layer: 0.2 Infill: 15-20%

Downloads
1,362
Likes
300
Rating
4.64
P
PrintablesDemigodofa

(10) Stacked Honeycomb panels quicker printing

I used PLA, all your favorite flow cals etc should work great, I did mine at .2 layer height with a .4 nozzle. Your slicer will show errors, do not print with supports. The layers “floating” is why they come apart so easily.

Downloads
1,273
Likes
159
Rating
0
P
Printablesiceface2

Stacked Tires Pen Holder

You can find this print from a creator on thingaverse. I only modified it a little to be larger and function better with a couple more pens in the holder. I recommend printing with Black PLA at 15-20% infill. Maintain all the same…

Downloads
1,103
Likes
296
Rating
5
P
PrintablesRudeytwotone

Gridfinity Grids - Stacked for Printing - with supports

Stacked Gridfinity Grids with modeled support

Downloads
958
Likes
81
Rating
4.33
P
PrintablesCederb

Stacked Polyhedra Magnetic Base Marker Towers for 3D Scanning

Marker tower designed for 6mm markers with 10mm outer diameter. I am using these magnets https://www.supermagnete.de/eng/magnet-systems-threaded-studs/neodymium-magnet-system-22mm-black-rubber-coated-with-threaded-stud_GTNG-22 The hole in…

Downloads
646
Likes
52
Rating
5
P
PrintablesChenze

Stacked OpenGrid Tiles

🧱 Stacked Tile Remix - Manual Stacking for Efficient Printing This is a remix of the tile system originally developed by David D , with tile generation by BlackjackDuck - huge thanks to both! I've added a manual stacking solution to help…

Downloads
633
Likes
64
Rating
5
P
PrintablesPenolopyBulnick

Stacked Pendiente Palma Earring

Simple reimagining of the Pendiente Palma Earring design. I took the basic shape and stacked it. Looks great with tri-colored filament (Copper-Gold-Blue)! 2 earring designs are meant to be printed per earring and glued back to back (base…

Downloads
507
Likes
157
Rating
5
P
PrintablesRob W1RCP

Anderson Powerpole Chassis Mount (for 2 stacked connectors) Updated 3-15-2025

Back in the day, I wanted to mount two Anderson Powerpoles into a sea-bird-like case from Xiegu. I didn't want to spend $27usd on one of these when a few minutes of designing would lead to a $0.75usd 3D print. Drill a hole just slightly…

Downloads
492
Likes
61
Rating
4

Stacked Rock Caves - Aquarium

2 different textured rock piles with cutout entrances for fish/shrimp to hide in. Designed with thin walls to keep printing costs down. scaling down shouldn't exceed 50% or the walls will become very thin. Both options are printable…

Downloads
488
Likes
108
Rating
0
P
Printablessupermanwah

RC3 Headband 3-hole punch-6x-stacked

Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…

Downloads
451
Likes
1
Rating
0
P
PrintablesMigueppc

Christmas Tree: 3D Printing in Vase Mode and Stacked Assembly (Multi-color)

This 3D Christmas tree goes beyond decoration—it's a versatile canvas! Print it in 'vase mode' for a sleek look or choose 'stacked assembly,' enabling vibrant colors for each block. With options for contemporary or traditional styles,…

Downloads
451
Likes
128
Rating
4.6
P
PrintablesDaniel Wyrwał

STACKED - Prusa Protective Face Shield - RC2

This is stacked version of Prusa Protective Face Shield - RC2. I added only small pieces to support visor pins. The rest of Face Shield is untouched. Gap between parts is 0.3mm. Print instructions Supports are not necessary. Print with at…

Downloads
442
Likes
1
Rating
0
P
PrintablesModellaner

PRUSA RC3 faceshield remix - "stacked"

Big thanks goes to Josef Průša and the PRUSA company for this design! Attension: Read the instructions before bring it in circulation there are some important things you have to notice. Use the following link to get those:…

Downloads
430
Likes
2
Rating
0
P
PrintablesLaptop-Guy

Stacked Bat Lantern

Stacked Bat Lantern LED Tealight or Votive Candle Holder Halloween Decoration This is a 100x60x60mm Halloween LED tealight or votive lantern. The thin print settings make this lantern glow with light from the flicker of LED candles. Easy…

Downloads
428
Likes
171
Rating
5
P
PrintablesTheOvenCook

NETGEAR Switch DIN rail mount - single and double stacked

Great for most NETGEAR switches, 5 port, 8 port and 16 port… Not tried anything bigger. Probably works with other brands too.

Downloads
380
Likes
51
Rating
5

Stacked RC2 STL File

We have printer that prints disolvable support material. This allows us to do some interesting stacking of builds to get more product out of a printer volume. Downside, the print takes about 18 to 24 hours to print a stack of 6. I can get…

Downloads
342
Likes
0
Rating
0
P
PrintablesDerpFishStuff

Stacked Pipes for Shrimp tank with moss lattice

A modifed version of the stacked pipes that has lattice on the sides to grow java moss.

Downloads
342
Likes
55
Rating
5
P
PrintablesPenolopyBulnick

Stacked Hearts Earring

These simple earrings are made up of stacked hearts. Printing is pretty normal, you just change colors between layers to get the hearts in different colors. The earrings are mirror images of each other. Designed using Tinkercad. Printed…

Downloads
338
Likes
126
Rating
4.5
P

MMS Stacked AR-15 Double Magpouch

The MMS Stacked AR-15 Double Magpouch! Is the single magpouch just not enough, or you want to carry more mags on your belt? Here you are! Holds 2 AR-15 magazines in one module! Use with the MMS Heavy Belt Module and other MMS mounts for…

Downloads
326
Likes
70
Rating
5
P
PrintablesLaptop-Guy

Stacked Pumpkin Lantern

Stacked Pumpkin Lantern LED Tealight or Votive Candle Holder Halloween Decoration This is a 100x60x60mm Halloween LED tealight or votive lantern. The thin print settings make this lantern glow with light from the flicker of LED candles.…

Downloads
322
Likes
106
Rating
4.8
P
PrintablesThe Typical Ham

Stacked Mobile Ham Radio Mount

Mount 3 Similar Mobile Radios like the QYT 980Plus, BTech 50x2, and Others with mounting holes 50mm apart, on center. You can find the radio used here, https://a.co/d/e06hdWa Print 2 pieces. I used 25% infill with 5 Walls. PETG…

Downloads
272
Likes
49
Rating
0
P
Printablesfiretech

Stacked Knob Planetary Gear Fidget Toy

A typical 3D printed planetary herringbone gear fidget toy, but with the ring gear, carrier and sun gear extruded to three stacked knobs. I saw something similar to this in a video online, but couldn't find the source model. Bored and in…

Downloads
272
Likes
58
Rating
5
P
PrintablesCubicleNate

Stacked Laptop Dual Monitor Bracket

This bracket is specifically designed for the usage with an HP EliteBook 840 G7 and a a Portable 14" Arzopa 1080p monitor. The thickness allowance for the monitor is 7.8mm and the portable monitor is 10mm. Other laptops and monitors may…

Downloads
238
Likes
26
Rating
0
P
Printablesthomasvnl

Netgear GS308 Switch Stacked Wall Mount

Needed a way to mount two GS308E Netgear switches onto a wall on top of each other to conserve space so designed these wall mounts that fit around the switches. I have left room below the switches to pass cables, and left gaps between the…

Downloads
234
Likes
25
Rating
5
P
PrintablesHelgi Mohr

Stacked Sphere Spiral Fidget

Made with Onshape. Print in place. Satisfying.

Downloads
224
Likes
44
Rating
5
P
Printablestjb1

X1C Stacked Prime Line

This machine start g-code moves the priming line on top of the load line. This makes it easier to remove as it will be thicker and removes the back right corner line. 6-13-23 - Now incorporates lines to tie the flow calibration lines…

Downloads
222
Likes
43
Rating
5
P
PrintablesBannMakes

Laptop Wall Mount - Stacked Display

A simple bracket for holding a laptop against a wall that enables the screen to be opened. I use this as a third monitor in a stacked setup, mainly for video calls. Print with the long side against the bed. No support needed but I did…

Downloads
217
Likes
22
Rating
0
P

Stacked Wave Disc Plastic Springs

Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.

Downloads
216
Likes
15
Rating
0
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h per shield ! - 4x Stacked , easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…

Downloads
205
Likes
3
Rating
0

RC1 HEADBAND PRE-STACKED, SUPPORTED, NO LABEL

Our state has approved RC1 so we can't print the new version. Here are files with 0.2mm & 0.3mm spacing, with or without built in support, and with or without a tab on the front to help with warping. The Prusa label has also been removed…

Downloads
192
Likes
3
Rating
0
P
PrintablesThomas Goates

Stacked Lack Enclosure (2 enclosures and 1 shelf)

I redesigned the original lack enclosure design so it would be more robust and sturdy in order to stack 2 enclosures with 1 bottom shelf. I also created a spool holder inside of the enclosure that works with the removable injection molded…

Downloads
191
Likes
65
Rating
5
P
PrintablesMPritsch

Fractal North Stacked HDD Cage Extension

This allows stacking 2 HDD's with one of the Fractal North HDD cages. Probably works for other HDD cages as well. The print is intended to printed 2 times. One in the current orientation and one mirrored. I forgot to do that in my final…

Downloads
190
Likes
12
Rating
0
P
PrintablesJoe Jankowiak

Machinist Square Tool Holder (Stacked)

This tool holder is designed for the iGauging machinist square set, but probably works for any similar sets from other manufacturers: https://www.rockler.com/igaging-3-piece-engineers-square-set A left and right version are provided as…

Downloads
185
Likes
33
Rating
0
P
PrintablesNC10

Vertical Wind Spinner Blades set for a fixed 10 degree rotation when stacked

Added a slot w/matching tab to bce.gatien's vertical wind spinner, holds the blades @ 10 degr. rotation one to the next

Downloads
183
Likes
44
Rating
5
P
PrintablesTibuck

Stacked Screw sorter storage

Stackable screw sorter/storage box. The Small cup goes on the bottom then smallest to biggest screens bottom to top, Fill the biggest screen ( top one) place lid and shake to sort by screw size, It also acts as a storage bin as well once…

Downloads
180
Likes
44
Rating
5
P
PrintablesAmoory

Anbernic RG505 Stacked Triggers

This model was remixed from ScottMuc's Anbernic RG405M Shoulder Buttons , scaled and edited to fit the RG505, although its recommended to print with SLA printers, I printed mine with FDM (Kingroon KP3S) and there were zero issues with…

Downloads
170
Likes
10
Rating
5
P
PrintablesDogu Kaya

UPDATED 12mm x 4-Stacked with Ladder Locks, 0.3mm Layer Height

This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm Print instructions This is for PETG. All print settings are included in the 3mf file. You need…

Downloads
154
Likes
2
Rating
5
P
PrintablesKeith B

Prusa Face Shield Stacked 3.2 remix - 8 piece 10hrs - no bottom - PETG

We are not using the bottom reinforcements. This Gcode starts with the Prusa provided Gcode for the Protective Face Shield 3.2, with the bottom reinforcements removed. Version 3.2 is stronger, no further changes are needed. See the…

Downloads
145
Likes
0
Rating
5
P
Printableskrisztian96

Triple/Quad stacked HDD Holder TPU

I upgraded my homelab with a third hard drive and needed a new holder for it. The previous was from this page. I dried my TPU and quickly designed this holder. I know it is not ideal as i should have designed a PETG frame with TPU inserts…

Downloads
145
Likes
19
Rating
0
P
PrintablesCoronaSolved

Face Shield CS V2 - 1h/shield ! - Stacked version, easy separation - More comfortable and faster print | compatible with Prusa

Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…

Downloads
144
Likes
3
Rating
0
P
PrintablesJakub

Prusa RC3 Low Material Face Shield Remix Stacked

I set this interesting model in the stack and made a few corrections acc. to Prusa stack: models are slightly more apart from each other to separate them without surprises supports go away easier a few extra places for adhesion Print 8…

Downloads
142
Likes
0
Rating
0
P
PrintablesThzPrint

Stacked Spray Can Organizer

Made this so that i could organize my spray cans. Done in Blender. No supports needed. Printed in PETG but you should be able to print in PLA too. I don't have any particular settings. Just generic settings will be fine. Category: Tool…

Downloads
141
Likes
26
Rating
0
P
PrintablesSiddharth S

Modular Tiered Organizer | Multipurpose Stacked Organizer

This modular organizer is designed to adapt to your needs. Whether you're organizing your desk, workshop, bathroom, craft space, or kitchen, you can customize the number of tiers or scale model however you'd like to create the perfect…

Downloads
140
Likes
109
Rating
0
P
PrintablesChrisPDuck

Nespresso dual stacked pod holder

Designed from scratch to hold a pair of Nespresso coffee pod tubes. The goal was to take up less countertop space than the single stacked designs. There are spaces for the labels cut from the box lid to be placed. Designed not to latch…

Downloads
129
Likes
40
Rating
5
P
PrintablesMatt Goodson

Pen and Business-Card Holder - Stacked Tires Automotive

This is a pen and business-card holder designed to look like a stack of three tires with a fourth leaned against it. I printed mine using the following print settings: 0.08mm layer height 5 walls 15% infill No supports

Downloads
127
Likes
15
Rating
0
P
PrintablesRip282

Three Stacked Tires Pen Holder

Features: Three stacked tires with realistic tread. Functional design – hollow interior for pens, pencils, or small tools. Compact size – fits easily on any desk. Easy print – no supports needed. Print Settings: Material: PLA / PETG Layer…

Downloads
125
Likes
30
Rating
0
P
PrintablesKeno

Stacked Donuts Pen/Pencil Holder

This is a model I made that is used as a pencil/pen holder. Print settings: layer height 0.2 infill 7% - 15% whatever you prefer supports ON Recommended support settings I used for easy removal: line width for supports: 0.25mm type: tree…

Downloads
123
Likes
51
Rating
0
P
PrintablesDazus K

Stacked Diamond Christmas Ball

Here's a design I created a while ago, but never shared online. I found it while decorating my tree this year. I decided it was too good to keep to myself. I've provided updated PrusaSlicer 3MF and Prusa MK3S+ GCODE files. I tested the…

Downloads
119
Likes
30
Rating
5
P
PrintablesDennisP

Stacked nut box

this is a neat little box to keep random stuff in, ofcourse the nuts have real threads so you can firmly close tho box! Print instructions Mine ar printed in PLA at 0.2mm but you can print these in any material, color or layer height u…

Downloads
113
Likes
15
Rating
4
P

Stacked Mug Trellis

I used 2 walls and 10% gyroid infill and that seemed well enough to keep it upright and sturdy while holding up a plant.

Downloads
107
Likes
40
Rating
0
P
Printablesdanns87

Mandalorian - This is the way 2D wall art (Remix - stacked)

This is a simple remix of dtm2477's piece here ( https://www.thingiverse.com/thing:4062243 ). I printed the two halves separately and super glue'd them together, but you could achieve the same effect by stacking the models and changing…

Downloads
105
Likes
25
Rating
5
P
PrintablesHrumque

Ikea Lack stacked table with drawer for BambuLab etc.

Needed: 2x (or 3x) Ikea Lack Table 304.499.08 (or other color, if you like) https://www.ikea.com/gb/en/p/lack-side-table-white-30449908/ and another 4 legs from table like this (so buy 3 tables, or go to “As-is” discount area in ikea…

Downloads
104
Likes
41
Rating
5
P
Printablesmeie1kyl

Stacked Hard Drive Mount 2.5 Solid State and 3.5

Simple hard drive mount for a 3.5 and 2.5 inch hard drive. M3 screws required for SSD/2.5 and 6-32 screws required for 3.5" drive. I used VHB double sided tape to secure the drives in my computer.

Downloads
102
Likes
16
Rating
5
P
Printablesnotanartist

Milwaukee Packout - 4 Stacked Cups / Deep Profile

This is a set of 4 stacking cups that fit the deep profile Milwaukee Packout Organizer. These fit inside one of the original organizer bins and stay snug when the lid is closed. Files include 4 stackable cups with various dividers (open,…

Downloads
101
Likes
17
Rating
0
P
Printablesblalor

Clough42 Gridfinity Grids - Stacked for Printing

I love the idea of @Clough42 's Gridfinity Grids - Stacked for Printing , but there wasn't much info on how to actually get the printer to do the thing, and I was initially faced with some issues. Comments on that model showed that other…

Downloads
88
Likes
10
Rating
0
P
Printablesiliptikal

Magnetic Haptic Slider Fidget - double stacked magnet base remix

The slider with the 5x2mm magnets was too weak for me so I remixed the base to use two magnets stacked to be stronger.

Downloads
87
Likes
20
Rating
0
P
PrintablesRavi

Stacked stand for two Boss RC505 Loopers

Here is a design to hold two Boss RC505 Loopers at an easy to use position. The photos shows RC505mkii (top) and RC505mki (bottom) loopers. The looper trays are pretty big and I printed them on Rat Rig V-Core 3 400mm printer. I had to…

Downloads
85
Likes
2
Rating
0
P
Printableshaden

Stacked Terminal block DIN rails

Print 2 or more for longer terminalblocks. Use M3 bolts for securing.

Downloads
85
Likes
17
Rating
4
P
PrintablesWard
Downloads
83
Likes
17
Rating
5
P
PrintablesMech Matt

RC3 Headband 3-hole punch-4x-stacked

4 stacked Print instructions !!make sure you check your setting!! I printed at 2.0 layer height and 5 % infill. 10 % infill on the supports: a little tough to remove the layers in between the bands

Downloads
80
Likes
0
Rating
0
P
PrintablesManny

Stacked 4 high snap in faceshields

Based on the design by made by HanochH ( https://www.thingiverse.com/thing:4233193 ) A ready to run stack of 4 faceshields. You can snap in an A4 or 8.5 x 11 transparent sheet and lock it in to place! No hole punch required!

Downloads
80
Likes
0
Rating
0
P
PrintablesDPs_Designs

Iron Maiden Name Logo (Stacked Version)

Up the Irons! This 3D display plaque features the iconic, jagged typography of Iron Maiden in a compact, stacked layout ("IRON" positioned over "MAIDEN"). Designed with a distinct white perimeter outline sitting over a solid black backing…

Downloads
78
Likes
14
Rating
0
P
Printableshaliphax

Stacked openGrid Lite base plates

Stacked openGrid Lite base plates. Plate sizes range from 4x4 to 9x9, and stack heights range from 2 to 9. The base plates were generated with the Perplexing Labs openGrid Generator and stacked using a custom Python script . Plates have…

Downloads
76
Likes
4
Rating
0
P
PrintablesBamBam Design

Planter - Blobs stacked (scaleable)

Planter - Blobs stacked (scale-able) A modern planter design with stacked blobs. Planter is watertight! The inner blob structure is only in the last 3 rows for faster printing. I uploaded one size but it's easy to scale to your wishes:…

Downloads
73
Likes
13
Rating
0

FabLab U. de Chile FaceShield v5 4 stacked

Stacked remix of the FabLab U. de Chile FaceShield . 4 stacked faceshields with 0.2mm separation between each one. Gcode for Ender3 printers and STL files. Print instructions Optimized for 0.4mm nozzle.

Downloads
72
Likes
3
Rating
0
P
PrintablesAJP Prints

Updated Stacked Pumpkin Lantern

I took the amazing Lantern design made by Laptop-Guy and made a few fixes he did for future lanterns. My biggest issue with the original was due to how it was assembled one side would end up thicker than the other so I added a 45 to the…

Downloads
71
Likes
15
Rating
0
P
PrintablesBengineer

Stacked Cookie Cutter

These Cookie cutter give you a huge selection of different sizes. From the tiny ones for your afternoon tea to the largest ones to write a name onto. For easy storage in the kitchen they can be stacked into each other. For printing you…

Downloads
69
Likes
16
Rating
0

covered fidget-base-double stacked 6x2 magnets

Loved the original model and preferred the look of the covered model but my magnets were too weak after being covered by the top layers, so I made them twice as deep. Process is the same for assembly, add a pause before the top layers and…

Downloads
69
Likes
13
Rating
0
P
Printablesmcnaughty

modular stacked cuttlery organizer

modular cutlery drawer organizer with stacked angled cutlery to save space and still be easily accessible. Cantilever snap clips built into design so no additional materials required to attach. Print one of the end then as many of the…

Downloads
69
Likes
13
Rating
0
P
PrintablesTTR.Town

Floor - Tile - Stone - Diagonal Stacked - Medium - 1x1 (SQUARE) - Center 1.3 (DEGRADED) - 3D Modular Dungeon Tile - DnD Town Minis (www.dnd.town)

Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…

Downloads
67
Likes
9
Rating
0
P
PrintablesTripleDimension

STACKED Face Shield / Visor Frame - 80mm 4 holes (BRAZIL and EUROPE)

V2 REVISED: 15 stack, 3.9mm objects divide into 0.3mm layers exactly. Stacked for more efficient printing. Slightly improved design. Recommended layer height: 0.3mm Recommended material: PETG Other materials and layer heights are unlikely…

Downloads
62
Likes
1
Rating
0
P
PrintablesDerik Whittaker

Stacked PSU Mounts

Simple to print Stacked PSU Mounts for stacking 2 PSU's together. The Stacked design allows easy access to the terminals, but they are not offset. The design also provides about 40mm of space between the PSU's which will allow for quality…

Downloads
61
Likes
10
Rating
0
P
PrintablesRoland Brandt

Stacked Flower Pumpkins

Stacked Flower Pumpkins.

Downloads
60
Likes
24
Rating
5
P
PrintablesRobert144

stacked stone retaining wall bricks

a clone of a castle rock building block. I sliced with cura using special mode (mold) with the following settings. 1 : wall thickness = 10 mm 2 : angle = 45 deg 3: roof height = 0 mm Update: I use tpu filament to make it easier to remove…

Downloads
60
Likes
1
Rating
0
P
PrintablespHiLViO

Spool Tower (Horizontal Stacked)

Stackable storage pole for your spools. You can print more tubes for stacking.

Downloads
60
Likes
17
Rating
0
P
PrintablesAditya Dian

Display Diecast Carlift Stacked

This is carlift can be stacked sideways (for diecast Hotwheels, Matchbox, Tomica MiniGT, etc)

Downloads
57
Likes
4
Rating
0
P
PrintablesJayBird_25

Stacked Pumpkins

Three pumpkins stacked on top of each other. Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5% infill, 2 walls, and plenty of supports around the bottom. Print as oriented. Please comment with any questions or…

Downloads
56
Likes
17
Rating
0
P
PrintablesRay Fox

9mm loader for double side and stacked mags

Could not find one that worked for me. Even bought some from Amazon. Soooo…I designed my own. The bullet pusher was not deep enough to allow inserting new bullet, especially for 15-20 mags. Neither were the bodies large enough to accept…

Downloads
55
Likes
3
Rating
0
P
PrintablesJiří Kvítek

(Un)Stacable tray, which cannot be stacked.

I had a great idea for a stackable tray for small parts for my workshop. But as it happens, something went wrong, it simply cannot be stacked :) This opens up a great opportunity for better designers than me to remix this awesome work…

Downloads
53
Likes
38
Rating
0
P
Printablesr0bby_77

PlayStation Logo Version 2. Stacked

This is a version of my last PlayStation Logo. This time the letters are stacked and are thicker to help them stand up. There are files to print the buttons individually, and a file for printing it together. It is available with a…

Downloads
51
Likes
6
Rating
0
P
PrintablesDavid

Skadis Stacked (180mm, suitable for small printers)

Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…

Downloads
51
Likes
0
Rating
0
P
PrintablesSteedMaker

Stacked Spheres

An abstract sculpture created by welding spheres. It could act as an artistic design, a trophy or an award. There is a round and oval version - the oval version (vert stretched) might lend itself to printing with a FDM printer. This model…

Downloads
51
Likes
16
Rating
0
P
PrintablesThePittEnjoyer

Stacked honeycomb storage wall - thin PLA separator

I liked the idea of stacked honeycomb printing but did not like the color/texture difference of having every other honeycomb be PLA. I opted to print a thin layer of PLA to separate the 2 PETG honeycombs to print 2 honeycombs. Print took…

Downloads
50
Likes
9
Rating
0
P
PrintablesMazetropolis

Heart Pen Organizer – Stacked Heart Desk Holder

This heart-shaped pen organizer is a compact desk holder designed to store pens, pencils, and small tools in an upright position. The organizer is built from dozens of stacked heart shapes , creating a layered texture that forms a…

Downloads
50
Likes
5
Rating
0
P
PrintablesJulie Bowen

Stacked Stone Chopstick Holder

About: There are already many awesome chopstick-holder designs out there, but I wanted to tie in the concept of eating Chinese or Japanese food with the peacefulness of Zen practice in those cultures, so I decided to design a chopstick…

Downloads
50
Likes
54
Rating
0
P
PrintablesDirtyPrints

Raspberry Pi 3B SKR Mini E3 Stacked Mount

Mount to stack a Raspberry Pi 3B and a SKR Mini E3 on top of each other. The design is based on the mounts for Voron 0.1. To mount it, you also need a fitting Raspberry Pi 3B Mount. I designed it to stack the SKR on top of the Pi. It…

Downloads
49
Likes
4
Rating
0
P
PrintablesNecropaw

Fysetc Spider with stacked Mellow Fly 5160 Pro

A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans. Each layer can use either m3 nuts or screws (see photos). No supports needed for printing.…

Downloads
49
Likes
7
Rating
0
P
PrintablesRoland Brandt

Stacked Book-Shaped Smartphone Stand

Stacked Book-Shaped Smartphone Stand.

Downloads
48
Likes
9
Rating
0