1,258 models
Combine your love of Polaroid cameras and indoor plant life with this 3D printed planter shaped in the style of the Iconic Polaroid Instant camera. I designed this planter to be the exact size of a actual Instant camera, the exact…
I was looking for a stable desk mount for my Unifi G3 instant cameras that could be elevated more than the existing models I found. After printing the nanoHD DeskStand from BradleyB, I was impressed with the stability and desided to remix…
Mounting base model for Unifi Protect G3 Instant camera. Can be added to your custom mount to give you a single piece solution to meet your needs. Print instructions Category: Camera Summary Mounting base model for Unifi Protect G3…
The Ubiquiti G3 Instant has a small base and is easily knocked over. Simply setting it on a shelf doesn't allow and vertical adjustment. This stand is a little more stable than simply setting it on a surface and allows full articulation…
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
This adapter enables mounting of the G4 Instant in a corner. The original mount is attached to the adapter using 2 pcs of thread-forming screws with dimension B3x10. There is space behind the adapter for cable routing. Print the model…
Constantine St. Benedict Zippo Stash Box.
Case for a Raspberry Pi 4 B running Home Assistant OS with two modules : Zigbee 3.0 USB Dongle RTL-SDR Dongle for 433 Mhz devices Other components used : 30mm fan (from my previous RPi 4 case) 4x m3 insert (CNCKitchen M3 standard insert)…
Custom box for Home Assistant Glow sensor, built on D1 Mini and ESPHome. In the files you will also find a modified version (v2) of the sensor box with a holder for easier removal of the sensor. Home assistant Glow by Klaas Schoute :…
As with any of my designs born out of immediate necessity, I ordered a battery pack online... only to realize I had selected the wrong size. But fear not, here comes the solution. A battery box designed for a single AA battery, capable of…
A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.
If there are problems with the bed adhesion try to print it with brim.
EN: Box for instant soup bags with up to 5 removable dividers. It is printed without the use of supports. Dimensions: width = 13 cm depth = 17 cm height = 8 cm CZ: Box pro sáčky s instantními polévkami s max.5 odnímatelnými přepážkami.…
This mount uses magnets to hold the Voice unit in place. Press the magnets into the 4 posts on the printed model. I recommend using a right-angle USB-C cable to connect your power source. Requires: 4x 4x2mm magnets 4x *ferrous/magnetic*…
This model slides onto the edge of character boards for the for the board game “Sleeping Gods: Distant Skies” to track health. This model avoids the problem of bumping the wooden health tracker that normally sits on the board. No supports…
With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…
Home Assistant Yellow stand for mounting device vertically, Printed on a Prusa Mini+ using Paramount3D PETG filament, but any filament is fine. Normal settings at 0.2 layer height.
An enclosure for my Home Assistant Glow utility meter sensor. Other designs I've seen had the microcontroller and sensor as separate items, I didn't see the need and wanted a single enclosure. I had ESP32 Mini on hand as otherwise, I…
Cover/case for the Home Assistant ZBT-2 Zigbee/Thread antenna if you need another color to better fit your home. Recommended print settings: 0.40mm nozzle 0.2mm layer height Supports (only for antenna cover)
An OpenScad implementation of the “ crossed-lines method” for creating curves of constant width . I include some examples (with a constant width of 10cm and a thickness of 2cm) and the script used to generate them. The script is able to…
If you are venturing down the Home Assistant local voice control rabbit hole, I wish you good luck. My hope is that this model may save a little time if you want to throw all components into simple housing. There are two versions. v3:…
Intro Introducing Photo Frame for the C.lamp system designed for Kodak Instant photos 2.1" x 3.4" What is C.lamp ? It is the clamp for your lamp! (or any other vertical 1 inch tube or pipe with a rough surface). C.lamp is ideal for IKEA…
I have a Dell 3040 WYSE mini computer running Home Assistant. This is the wall mount I designed for it. Not perfect, but should get the job done. I plan on printing in light blue filament. 1st design was a little to tight. Version-2 is…
This is a 12V buck boost regulator which can be mounted directly to a battery. Because it is a buck-boost converter it will always output 12V (or any voltage set by the user) even if the battery voltage is lower than 12V. It can even…
Cover/case for the Home Assistant ZWA-2 z-wave antenna if you need another color to better fit your home. There are single color versions for different printer sizes and one version if you want to have a multi color antenna. Recommended…
Tactile image of graphs showing constant speed and acceleration curves plotted. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to…
I made a case for the Arsenal Camera Assistant 2 Pro. Printed with PLA, no supports needed. Two version of the lid, with or without logo.
100x160mm sign, reading "Instant Gratification takes too long" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
Mr Fox had a bunch of instant coffee jars laying around and for some reason wanted to stack them horizontally. The stabilizers are modular and connect to form longer strips.
UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…
Living in an area with frequent winds (and while my previous hook designs were well-received) I realized I needed a version with significantly more mass and a deeper profile to keep shovels, rakes, and heavy brooms pinned safely against…
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE 27th February 2022-…
Files for the XT30, XT60 and XT90 are now here…. EDIT: 8/10/22 Created the parts with raised letters. Mark them with a felt pen to make them easy to stand out. I got tired of fighting to keep the plug and wires in place while soldering…
TongsNow is a kitchen gadget designed to transform regular cutlery into handy tongs. This 3D-printed accessory easily attaches to any standard cutlery, making it a versatile tool for a minimalist kitchen. Its adaptable design allows it to…
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. Two sliding dog clutches are provided on the main shaft. Gear ratios: 1.38, 1.00, 0.78, reverse 1.86 and…
This is a 3D printed keychain design of a Prusa Filly assistant. It is a miniaturized version of the popular paper clip character present in PrusaSlicer. This keychain is made to be attached to your keys or bags, serving as a cute…
Honeycomb Storage Wall stand for instant photos or paper notes Display your photos from instant cameras (such as FujiFilm Instax or Polaroid), regular printed photos or paper notes with a simple stand for the Honeycomb Storage Wall…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. A sliding dog clutch is provided on the main shaft. Gear ratios 0.75, 1.33 and neutral. This model was…
You will need a type of valve on the hose, like i have in picture. Model need 1 o-ring on gardena plug and 1 big o-ring inside nozzle or else user WILL be wet. I use o-rings but designet a TPU seal too. I have testet TPU seal and it…
I found that my new Qidi Box was prone to jamming when changing filaments. The jams consistently occurred when the filamant was about mid-way through the 4-into-1 manifold in the filament hub. After some experimentation, I discovered that…
Can be used as an AirTag Keychain or a luggage tag. The design is shock resistant and durable
Basic wall mount for Home Assistant Green. 2mm thickness and 1mm space between the cooler and holder. 2x screws 3mm, with D5mm head. Printed with PETG No supports
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
I really liked this design but it was for the G3 Instant Camera and I have G4 Instant camera's.. Not sure why Ubiquiti decided to change the mounts ever so slightly but because of that the G4 can't use G3 mounts. So this is a remix of the…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
This is a mounting system for the Unifi G4 Instant Security camera based on an excellent design for the G3 Instant. This design uses a corner bracket or flat mount with a dovetail socket, a 2 piece hinge that slots into the dovetail, and…
For more info about this project, please have a look at my blog post .
This model is the original enclosure for Home Assistant Voice Preview Edition optimized for 3D printing. It's based on the official injection-molded parts but with some adaptation to avoid many supports : Home Assistant logo on the bottom…
Privacy focused "smart" doorbells seem to be few and far between so I decided to build one that integrates with Home Assistant via ESPHome and is easy to build. For more info about this project, please have a look at my blog post .
The amazing Voice Assistant finally has a vertical stand! In fact, now it has three : The original stand, which has no backing for the device. It's elegant (you can see it in the photo), but some have rightfully complained that they feel…
I saw some other lighter + cigarette cases out there and decided I needed a waterproof, or at least water-resistant, case. I call it the Frog Case because when opened the inside holes make a sort-of frog face. I don't smoke tobacco…
Leela is a 3D printable sensor housing intended to be used with Home Assistant and ESPHome. She can be described as a "room sensor" with the primary sensors being motion, temperature and humidity. The data from these sensors can be very…
1:1 copy of the UniFi Instant G4 Cam Mount Plate that came with my camera.
18650 accupack soldering/welding assisstant for accupacks up to 4x6
I didn't realise this at the time but this should print fine without support tilted 90 degrees. Wall mount pattern is the same as the OneNineDesign RaspberryPi 7" Display case. Could be improved somewhat by make it hug the Green case a…
Summary This mechanism is designed to represent a constant force mechanism, which provides a constant force through a specific range of motion. This design uses crank-slider compliant mechanism configuration with nested cams. The…
A simple picture stand that should fit most instant camera pictures by customizing! Based on LuminDesignLab's design. 🧾Instructions (very fast & easy & online): here is a detailed up-to-date tutorial on how to customize online:…
This is a simple design to mount your Home Assistant Yellow to the wall or any flat surface. I wanted something that would use the existing case and screws it came with. Because the Home Assistant Yellow PCB mounting holes is perfectly…
Printing information This is a pretty simple print. Two pieces. A bust part, and a base. Printed separately. Resin This one comes pre-supported for small (e.g. Elegoo Mars) and medium (e.g. Elegoo Saturn/Anycubic Mono X) sized resin…
Description: Build your own high-precision indoor air quality monitor! This project uses the industry-standard Sensirion SCD41 sensor paired with an ESP32 to track CO2 levels, temperature, and humidity. It is fully integrated with Home…
The Ropener is an open-source motorized curtain opener that retrofits onto your existing curtain rod. Silent stepper motor, ESPHome-native firmware, no cloud, no app required. Works with nearly all curtain types. WHAT IT DOES Pulls your…
Unleash Your Smart Home's Potential: Create a Custom Home Assistant Dashboard! Ready to ditch generic interfaces and control your smart home like a pro? This project empowers you to build a personalized Home Assistant dashboard using…
A simple wall mount for the Home Assistant Voice Preview Edition
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE: 08/12/2020 Designed some handles for the popular…
This is a desktop stand for a Ubiquiti G4 Instant camera. This design utilizes two M3x5x4 heat set inserts and two 6mm M3 screws. The mounting plate included with the G4 Instant camera mounts to the printed part via the M3 heat set…
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE December 31st 2023- Added an optional slightly…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Modular tray and dividers for the ever popular Water…
Case for ESP32 board with external BT/wifi antenna I used as BT proxy from home assistant. Board I used is AZ-Delivery ESP-32 Dev Kit C V4. I re-purposed an ipad usb-c charger and micro usb cable. I'm sure there is a nicer and less…
This makes for a neat wall-mounted home automation controller e.g. using Home Assistant. You'll need M3 threaded inserts for the lid. The logo on the lid can be printed in a different color either using MMU or by manually switching…
This project is designed to help you stay on track with your focus sessions, using a simple and intuitive interface via a rotary encoder and an OLED display. Whether you need to time focused work, breaks or other worthy pursuits, this…
This model is the original enclosure for Home Assistant Yellow optimized for 3D printing. Compared to the transparent enclosure shipped with Home Assistant Yellow, it has a few adjustments which make it more suitable for 3D printing, in…
simple block for mounting the camera in the corner with the default base and strain relief I had some spare SPAX screws here. If you want other screws, modify the attached AutoCAD file. BOM: 2x SPAX Screw 4mm for wall mounting 2x SPAX…
A parametric stand and holder for PCBs, and other items that want to wander off when you're soldering at them. The rotating grips print in place, and the columns of the supports twist independently to lock the supports into the rails.…
This model clips into the existing quick snap fittings for the Unifi Protect G4 Instant and allows the camera to be angled downwards more than the existing swivel arm allows. The angle of this model is 45 degrees downward. The connector…
A tiny clip for your Ikea Skadis to hang up your beloved photos. I used it for photos created with the Fujitsu Instax Mini. I'm sure you can use it for any instant/polaroid camera. Make sure to print it sideways with support.
When mounting on a car, simply put one long cable tie through the holes on one side and back on the other. (3mf file can be a hint on how to interleave the tie). When the tie is closed, it holds the hitch ball. The thickness of the clamp…
Esta estantería modular está compuesta por módulos hexagonales individuales que se ensamblan entre sí por cualquier lado, formando una estructura tipo panal completamente personalizada. Diseñada para ser fácil de imprimir sin soportes y…
This is a version of my design for AA batteries, available here . It features two improvements to the AA casing: a slightly higher resilient element and a single hole instead one of the the grooves on the negative side. A battery box…
Another Raspberry Pi 4 Case to add to the never ending collection here. Other cases on here were nice but I just wanted a little different look to mine. The "insert" file can be printed in a different color (I used "home assistant blue")…
This is the second design of my little home automation sensor box. I've flashed it with ESPHome making it really easy to use in Home Assistant. Powered via the USB port on the Wemos D1.. doesn't work off a battery, this wasn't my…
A nearly invisible wall mount for the Home Assistant Green. Replace the screws with 25mm long M3 countersunk screws.
Easier and pain-free self injections: Injecting myself makes me anxious. This device takes away most of the stress by giving me an ergonomic grip on the syringe and automating the injection motion with magnets. After adding the syringe,…
Prefer to print it in ABS to be more resistant of the environment. Please leave a like if the mount also fits perfectly for you. Thanks!
Bracket for road- or gravel bike to safe space during bike transport. Printable without support if layed on the side. I recomend to drill out the 12mm hole after printing due to schrinkage. I printed it with 5% infill and just 2…
This is a remix of ThatGuy @ThatGuy_613397 Please check out his Blog https://tristam.ie/2024/1126/?utm_source=printables_esp32-s3-esphome-voice-assistant-with-local-wake-word
This was my favorite manual trans that I could find online, to 3D print. But it isn't the smoothest. The crank was just a square, so the clutches rotate with it. Bu t the round holes for the output gears, through a square peg, made it…
Una escuadra con rápida y fácil instalación, incluye los agujeros para introducir un tornillo con cualquier destornillador. Antes de instalarla sobre la estantería es recomendable dejar un poco de espacio para respetar el tamaño del taco…
UniFi's G3 Instant is a great little camera, but it tends to fall over, especially if there are children nearby. This model creates a basic stand for the camera, making it harder to tip over. Includes a rear opening for the power cable.
I own a Creality K1C and feeding the filament into the PTFE bowden tube is a hit or miss depending on how awake or how much in a rush I am. Decided to take luck out of the equation by making this adaptor to “funnel” the filament into the…
*********************************************************** Update *********************************************************** Edited the Omnipod retention tabs in the Omnipod case to allow for better overhangs.…
Replacement handle for InstantPot Air Fryer Vortex 6. Printed using PLA on a MINI. Instructions for replacement. Remove the 3 screws holding the basket to the front cover. Remove the 3 screws holding the handle to the front cover. Change…
I couldn't find a case for my Raspberry Pi 4 with PiJuice HAT and Waveshare PoE HAT installed so I made one myself. I use it for HomeAssistant but there is nothing HA specific so it can be used for anything else. FreeCAD source code is…
Home Assistant Glow makes a (not so) smart meter without a P1 port easily readable, using the pulse LED that is always present in most cases and it works with ESPHome ! To neatly hide it all in your meter cupboard, a case has been…
