Search results: tally

Sort order

131 models

Mechanical Tally Counter 5.0

READ BEFORE PRINTING! This is a non-commercial print, this means you are not allowed to sell files or prints of this model. ______________________________________________________________________________________ What is this? This is my…

Downloads
16,752
Likes
9,455
Rating
4.78
P
Printablesnevim

Holder for towel (it cannot be accidentally taken off)

Easy to print holder for towel. Use PETG so it is stronger, but PLA is also possible to use. Brim is not necessary but if its not holding on the plate then use brim. Use 0.20 layer hight with 25% infil and 2 perimeterrs. Here is video on…

Downloads
97
Likes
18
Rating
5
P
PrintablesCharles Clare

NetAlly NXT2000 PC Laptop Screen holder

This is a Holder for the NetAlly NXT 2000 Spectrum Analyser that sits on a PC Laptop screen. Designed so you don't break the USB connector when using the NXT2000 with WiFi Explorer Pro. (this one is for a thicker screen) Will print…

Downloads
5
Likes
3
Rating
0
P
PrintablesJan Havic

Elder Wand (Dumbledore Wand) from two parts with possibility printing horizontally and vertically

Because my girlfriend sat on my wand from first attempt ( https://www.thingiverse.com/thing:2508722 ) and broke it, I searched another, because model from TonePLA was too much symmetrical and didn't look like from movie. I decided to make…

Downloads
2,511
Likes
210
Rating
4.75
P
PrintablesMZ4250

A totally normal commoner with a nice hat ... not a bunch of cats. Nope.

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,554
Likes
421
Rating
4.89
P
PrintablesMr. MegaTronic

VEND - the totally printed candy dispenser

My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Here is my Magnum Opus for the week! VEND is a totally 3D Printed candy dispenser that accepts quarters and rejects other coins. VIDEO:…

Downloads
1,448
Likes
526
Rating
4.33
P
PrintablesTony GRILO

Caulking Gun Nozzle Unblocker - totally without support / Nettoyeur canule cartouche silicone

Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone

Downloads
1,318
Likes
245
Rating
5
P
PrintablesHackjaz

Geodesic Dome Cat House - Totally Screwed Remix

This geodesic dome was designed to be assembled as a cat/pet house. The dome accommodates a pet bed up to 400 mm (~15.75 inches) in diameter. It was remixed to be assembled using M3 screws & nyloc nuts. While you don't have to print or…

Downloads
1,096
Likes
592
Rating
4.83
P
PrintablesMZ4250

TIAMAT! Totally not a bunch of Wyrmlings in a Trench Coat.. nope!

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
1,072
Likes
244
Rating
5
P
PrintablesPaul T.

Mechanical Tally Counter 5.0 - Modified

This is a remix of the Mechanical Tally Counter 5.0 by FredrikHamrebjorkDesigns. I modified the Left and Right buttons, and the Back Cover. All other parts can be printed downloaded from the original model maker's page: Mechanical Tally…

Downloads
777
Likes
142
Rating
5
P
Printables3DWolf

Fully 3D Printed Tally Counter

Description: This is still work it progress and experience will show if it will work flawlessly, i still see issues with the reset function which works in theory but practically it seems the gears between themselves have to much…

Downloads
693
Likes
115
Rating
5
P
PrintablesBen Burnski

Totally cute animal home / pet house with cat or mouse ears

This pet house was designed to provide your cat or dog with a place of retreat where your little four-legged friend can feel safe and find peace and quiet. It is designed as a decorative cat house and tailored to the needs of your cat,…

Downloads
638
Likes
366
Rating
5
P
Printableslostintech

The totally mundane LIT Calibration cube

This is the cube I made to calibrate printers. Most of the parts are fairly self explanatory. The very top surface is supposed to bridge so make sure bridging is ON in the slicer. You may use this in your content (videos etc) if you…

Downloads
547
Likes
71
Rating
5
P
PrintablesMW-Mechanical

Super Simple Tally Counter

Assembly video- https://www.reddit.com/r/3Dprinting/comments/10pkhxp/super_simple_tally_counter/?utm_source=share&utm_medium=ios_app&utm_name=iossmf Make sure that the spring is in the correct direction and the edge of the square hole in…

Downloads
487
Likes
91
Rating
4.89
P
PrintablesMZ4250

Dread Pirate Captain and Totally Not a Flock of Parrots Pretending to be a Pirate

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Downloads
487
Likes
130
Rating
4.75
P
PrintablesZekko

Tally counter

Fully 3D printed mechanical tally counter. Parts that usually rely on metal springs are built into the model as plastic cantilevers. Since PLA slowly warps under consistent force, I designed this so no forces are applied when it's not…

Downloads
480
Likes
68
Rating
3.33
P
Printabless3rkan

Filament Spool Switcher & Winder Modular (Horizontally printed)

My main spool holder was not durable when printed. So I have splitted it and all parts are printed horizontally. To connect them all, you'll need M3 brass inserts (3x4x3, IDxODxHeight). You don't need support as all parts have its own…

Downloads
362
Likes
55
Rating
0
P
PrintablesFabianVeile

Worlds thinnest tally counter (proof of concept)

⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩⇩ Maybe this is more interesting for you - it's a prototype of a mechanical calculator based on this design: https://www.prusaprinters.org/prints/86506-mechanical-calculator-working-prototype (it jams less and is not…

Downloads
360
Likes
120
Rating
4
P
PrintablesJunkHouse 3D

I'm totally flexible.

“ Totally Flexible” Desk Sign For the workshop tyrant who pretends to compromise. This sign says what your face already does: you're chill—as long as everything goes exactly your way. Raised lettering, bold contrast, and enough sarcasm to…

Downloads
336
Likes
224
Rating
0
P
Printablessh

🚪 Parametric hinge - horizontally printed - print-in-place

Info: any width/height any number of holes hinge is adjusted to extra negative opening angle -105° (which means it opens in total to 105+180 = 285°) the plate is 3mm thick i needed parametric horizontally printed hinge for my previous…

Downloads
325
Likes
54
Rating
5
P
PrintablesKyle Pastor

Pokemon Bulbasaur Totally Normal Keychain

It's just a nice totally normal keychain… Its nice.

Downloads
273
Likes
45
Rating
0
P
PrintablesEvanRLD

Wireless Tally Light - DIY with ESP8266

Hi there ! This is a tally light model designed by my own, the goal was to give each camera operator an indication if he is on air, or in preview by the control room. This is a project I made for my video production association “La…

Downloads
260
Likes
44
Rating
5
P
PrintablesGR

Rubber replacement for FredrikHamrebjorkDesigns Tally Counter 5.0

As I don't like rubber bands, I looked for an alternative solution for this.

Downloads
247
Likes
28
Rating
5
P
PrintablesMarcElbichon

Fixed body for VEND - the totally printed candy dispenser

Original design of the body has a small default, and have 2 open bridges, just fixed it. Thanks to the original design!

Downloads
227
Likes
21
Rating
5
P
Printablesigorprado

2-digit Tally Counter

This is a remix of the great design by MW-Mechanical . I needed to print it quicker and just needed 2 digits, so I edited it in Fusion. Remixed and shared under the same attribution.

Downloads
227
Likes
22
Rating
4.5
P
PrintablesMarcElbichon

Fixed Flap and Coinface improvement for VEND - the totally printed candy dispenser

Some improvements : MMU version for the ‘coinface’ wich let you choose 3 colors for the body, inlay, and arrows Fixed ‘flap’, I was never able to mount the original one Easier to mount ‘coinface’, redesigned legs and clip for an easy mount

Downloads
200
Likes
40
Rating
4.5
P
PrintablesMarcElbichon

Multiple drum size for VEND - the totally printed candy dispenser

The original drum is big (~126 cm³ of candy capacity), I redesigned 3 smaller size : X-Small ~32 cm³ Small ~53 cm³ Medium ~73 cm³ Thanks to the orignal author of this dispenser!

Downloads
199
Likes
30
Rating
5
P
Printablesnightfox90

Rolling Tally Counter

Here is my rolling tally counter design. It can count up or down from 00 to 99 with one wheel for the ones and one wheel for the tens. My original design just had a serrated knob to turn. However my printing turned out rather stiff, so I…

Downloads
197
Likes
62
Rating
3
P
Printablesthall72

Lego Compatible (71752.dat) Brick 2 x 2 x 0.667 Ribbed Horizontally

This model is compatible with the lego system.

Downloads
195
Likes
20
Rating
5
P
Printableswireva

Mechanical Tally Counter 5.0 Scaled down screw

This is a remix of https://www.printables.com/model/76018-mechanical-tally-counter-50/comments/404706 I scaled down the screw so it won't flow in with the other parts making it fixed

Downloads
163
Likes
18
Rating
5

3-Digit-Tally Counter

3-Digit counter i use it for D&D monsters bc i don't like wrinting things down. Assembly video-of the original by the orignal creator but yeah it still works the same.…

Downloads
121
Likes
14
Rating
5
P
Printableswillyc_

M5StickC Cold Shoe Camera Mount - Tally Arbiter

This is a cold shoe mount for an M5StickC or M5StickCPLUS. This can be used with any camera shoe mount. Theres 2 version, one with the cold shoe screw on the bottom for it to face out, as well as a cold shoe screw on the back to face up.…

Downloads
113
Likes
12
Rating
0
P
Printablesgfretz

Tally 4-Drawer Modular Storage Bin

A simple, clean-looking modular storage bin with 4-drawer capacity. The modules are connected with a hidden dove-tail joint. There are three drawer configuations with 1, 2 and 4 separations. The bins can be stacked vertically or…

Downloads
110
Likes
13
Rating
5
P
PrintablesLloyd Keays

Spray Paint and can holder (by the bottom - horizontally

Hold your spray paint cans against a wall in little cut tubes. Very efficient space saving. Note: you need to print this in a fake* vase-mode: (this print won't work in standard vase more - spiralized contour - but it will it you simulate…

Downloads
109
Likes
14
Rating
0
P
PrintablesTableForge_3D

Totally Normal Elf Citizen (3 Halflings in a Trench Coat)

"Why hello there sir! Pleasant day, yes? Don't mind us... er... me, just an ordinary elf out for an afternoon stroll." What mischievous creatures, those halflings. Perhaps they are pulling some sort of prank, or entering a city were their…

Downloads
102
Likes
19
Rating
0
P
PrintablesHynesman

Concrete filled almost totally printed mini CNC

This is a CNC mill that is printable, with the exception of some hardware for the linear rails and drives. The Z-axis is a premade aluminum, using in what i believe is the 3018pro. The chassis of the CNC is glued and several M6 threaded…

Downloads
98
Likes
28
Rating
5
P
PrintablesCullen Webb

4D Gridfinity Hex Key Holder - Stack metric or SAE allen wrenches vertically or horizontally, all sizes 7mm or smaller

Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). This specific…

Downloads
92
Likes
19
Rating
4.5
P

Totally Hair Ken's hair pin Replica

1:1 Hair Pin replica from the 90's Barbie edition of Totally Hair Ken

Downloads
89
Likes
29
Rating
5
P
PrintablesMacNite

Ratcheting Tally Counter including Multi Material Option

I modified the great model by MW-Mechanical for my needs (6 digits instead of 4) and added an multi-color-option.

Downloads
87
Likes
11
Rating
0
P
PrintablesStarkMan42

Tally Light (Wemos D1 Mini and NeoPixel)

This was my first try at designing a tally light case to use with Tally Arbiter software at my church. The case was designed to use- Wemos D1 Mini - Amazon NeoPixel Stick - Adafruit Misc parts and pieces- 3- 6.5mm x 2.5mm magnets 2- M2 x…

Downloads
86
Likes
13
Rating
5
P
PrintablesMrgigg

Dinosaur Island and Totally Liquid - Complete Organizer Remix

This is a remix of the awesome Dinosaur Island Insert by webdad - https://www.thingiverse.com/thing:3300040 I appreciated the concept of this insert, but it failed to accommodate all items in the organizer, like all of the dino meeples,…

Downloads
80
Likes
9
Rating
5
P
PrintablesJayson

The Totally Not Over-Engineered Wall Hook

The Totally Not Over-Engineered Wall Hook Why use a passive wall hook when you can have a mechanism? No floppy middle state here. A true magnetic bistable latch drives the hook open or closed with a deeply satisfying snap . Smooth,…

Downloads
78
Likes
30
Rating
0
P
PrintablesWild Rock

Mentally unstable sign

Just a warning to others in case of chaos.

Downloads
75
Likes
17
Rating
0
P
PrintablestHe CroW

IKEA Lack mount for MMU slot buffer horizontally

The MMU Slot Buffer by mar_jet is working very well, but I need it to mount horizontally on the IKEA Lack lid. It helps to use the original MMU2S-Buffer PTFE tubes. They are not long enough to use in the case of vertical installation of…

Downloads
68
Likes
12
Rating
0
P
PrintablesiScuzzy

NetAlly LinkSprinter LS300 hard case

A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…

Downloads
64
Likes
5
Rating
5
P
PrintablesPimax

Pimax Crystal (Light) Topstrap interface - Left & right (Thanks to Tally Mouse)

The accessory to attach the topstrap to the headset (Pimax Crystal or Pimax Crystal Light). Thanks to Tally Mouse.

Downloads
64
Likes
5
Rating
4
P
PrintablesPulsenote78

Wand Display Stand – 3D Model for Horizontally Showcasing 4 Presentation Wands

This model is a horizontal display stand designed to hold four presentation wands (e.g., Quantelix, Catalyx, Virelia, Axiona). Each wand rests gently in a U-shaped groove designed to fit handles with a diameter of 28–29 mm, preventing…

Downloads
63
Likes
5
Rating
0
P
PrintablesWebdad

Dinosaurs All The Way Down - Insert for Dinosaur Island and Totally Liquid from Store All The Bits

If you don't have access to a 3D printer, or would like to support my hobby, I have a shop where you can purchase this set. Visit StoreAllTheBits Online Store If you do your own 3D printing, but would still like to support my hobby, feel…

Downloads
60
Likes
17
Rating
5
P
PrintablesEzequiel

Tally Marks - Magnets

--Ultimaker Cura Settings-- Layer Height - 0,1 mm Print Speed - 65 mm/s Wall Line Count - 3 No Support Build Plate Adhesion Type - Skirt or Brim

Downloads
58
Likes
10
Rating
0
P
PrintablesJens83

TOES: Totally overengineered sample spool & spool holder

Introduction Colorprint is awesome until you get the bill for 10+ different filament spools. So I designed a sample spool filament system. This is also a great way to use up small quantities of left over filament, just put them onto a…

Downloads
55
Likes
27
Rating
4.5
P
PrintablesDantak

Mechanical Tally Counter 5.0 //body with hole

Just back cover with hole for attaching the key or just to hang this awesome counter Printing same as original author suggests. --------------------- Do you like what we do ? Give us download and like. We burn a lot of plastic in…

Downloads
55
Likes
12
Rating
0
P
PrintablesPreston Smith

Tally Twist (Dial Counter)

Keep track of your disc golf score, this handy dial ranges from -9 to 69 and doubles as a satisfying fidget spinner.

Downloads
54
Likes
5
Rating
5
P
PrintablesTalynDavis

Tallybar - EDC Prybar

I was browsing on Amazon for EDC trinkets and gizmos, and I was entranced by these metal prybar tools. So I made one! I recommend printing this with 100% infill to make sure its as strong as possible I printed this out of PCTG because my…

Downloads
52
Likes
8
Rating
5
P
Printablessternli27

Tally Light Case for NodeMCU ESP8266 OBS vMix

I designed this tally light case. The usb cable can be fixed in place with a zip tie. Insert some metric nuts during the print. 1x M4 Nut on the bottom 4x M3 Nut for the lid Screws: M4x20mm M3x16mm I used this setup:…

Downloads
51
Likes
9
Rating
0
P
PrintablesMar Ber

TOUSDE - Totally useless design award

english Inspired by Henry Moore's sculpture "two large forms" ( https://en.wikipedia.org/wiki/Henry_Moore ), I tried my hand at an organic trophy. Of course, one can be divided about the artistic value, but I like the sculpture. Sometimes…

Downloads
50
Likes
10
Rating
0
P
Printablesgfretz

TallyJour Perpetual Calendar

This is my take on a perpetual calendar. It consists of three pieces which use dovetail or tongue and groove joints for its assembly. The blade slides sideways to align the first day of the month with the day of the week. The entire month…

Downloads
48
Likes
15
Rating
0
P
PrintablesBlake

netAlly EtherScope nXG / LinkRunner G2 Adapter Holder

Simple friction fit holder for the 1-6 WireMapper adapters as well as two SFP modules for the EtherScope nXG and LinkRunner G2 network testers.

Downloads
48
Likes
3
Rating
0
P
PrintablesStoneyLloyd

Bracelet Chain - Totally Adjustable Length & Print in Place

This chain is of the muti link type made up of separate detachable links. THE LINKS DO NOT SNAP TOGETHER Because the links can be detached and attached by turning to 90 degrees and sliding. The included STL file makes 20 such links using…

Downloads
46
Likes
4
Rating
0
P
PrintablesAtko

Tally Light Case for NeoPixel Ring and Wemos D1

This is a Tally Light that has a 1/4-20 thread on the bottom to mount to various cameras (e.g. using this hotshoe adaper ). It's based on a 12 LED NeoPixel ring and a Wemos D1 ESP8266. You can use it with various wireless Tally Light…

Downloads
46
Likes
4
Rating
0
P
PrintablesRob van Doorn

Totally Overengineered Jayo to Bambu Lab AMS adapter ring

Totally Overengineered Jayo to Bambu Lab AMS adapter ring to fit my 650grams cardboard Jayo ABS spools. Print out the file twice, allign them in the hole of the cardboard spool and jam them in. Secure the two halves together with a ziptie…

Downloads
44
Likes
10
Rating
0
P
PrintablesNick Hemingway

A stand for supporting your Crankshafts by the main journals when stored horizontally

Crankshafts can warp while being stored horizontally, print one of these for each main journal & store them safely.

Downloads
43
Likes
4
Rating
0
P
PrintablesChromaturtle

I have friends, I take AP Chemistry, I'm mentally stable: Fidget Toy

Based off of this gif: “I have friends,” “I take AP™ Chemistry,” and “I'm mentally stable.” You can only ever have 2 of these switched on, because everyone who’s taken AP™ Chemistry knows you have to sacrifice something to get a good…

Downloads
36
Likes
4
Rating
0
P
PrintablesBecker Thorne

Wyld Stallyns Rule - San Dimas California, License Plate Frame, Bill and Ted

Wyld Stallyns Rule - San Dimas California, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos

Downloads
35
Likes
9
Rating
0
P
Printablestermeric

Horizontally Connected Skadis Command Strip Mount

Aligns 2 Skadis boards horizontally for mounting with command strips and included ikea thumb screws i recommend also printing @DrTrailPrint_510530 's model for the outside edges each model requires 2 M4 nuts

Downloads
34
Likes
4
Rating
0
P
PrintablesMake a Thing

TUFS (Totally Unnecessary Flipping Scraper) - Print in Place - No Supports

I decided I wanted an ice scraper that folded nicely on itself so it can be long enough to reach the middle of the front. I also wanted it to be fun! The scraper flicks open with a satisfying flick and locks in place with the button.…

Downloads
33
Likes
8
Rating
0
P
PrintablesAnimetronix

Clover Figurine- Totally Spies

This stunning model captures her confident, sassy personality, striking a dynamic pose with her hand on her hip. She is dressed in her iconic, sleek spy catsuit with her signature flipped-out bob hairstyle. Clover is securely mounted on a…

Downloads
32
Likes
3
Rating
0
P
PrintablesShinobu Tezuka

120mm Horizontally Stackable Window Exhaust for PC/Printer

BOM Requirement M3x10mm Screws (for Body) M3x35mm Screws (for 120mm Fans) M3 Nuts Noctua 120mm fans (4 pin) https://www.amazon.ca/dp/B07CG2PGY6 PC Fan Power and Controller (3 Fans) https://www.amazon.ca/gp/product/B0BY4W377P 4"…

Downloads
32
Likes
14
Rating
0
P
Printablesjbaekey

VESA 200x200 Mount for Horizontally Oriented 3/4 Iron Pipe

NOTE: Adjust the orientation for easier printing and strength. This is a mount made for a VESA 200x200 TV that will attach it to a 3/4 iron pipe oriented horizontally. Steeltek fittings were used to attach the piping together for…

Downloads
31
Likes
4
Rating
0
P
Printablesds679

A single piece cut-in-half horizontally (requested by WhelpImaGhost)

A single piece cut-in-half horizontally (requested by WhelpImaGhost)

Downloads
31
Likes
7
Rating
0
P
PrintablesSkidder

Tally Counter For Bicycle

A friend likes to count all the dogs she sees while cycling, but on a long trek it's easy to lose track. The solution was a tally counter mounted on her handlebars she that can be clicked by a flick of her thumb. This model holds a…

Downloads
30
Likes
2
Rating
0
P
PrintablesCullen Webb

4D Gridfinity Blanks - Make your own storage bin that can be used vertically or horizontally

Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). These specific…

Downloads
30
Likes
9
Rating
0
P
Printablesgernesha

Beer Tally, Bierzaehler, Beer Coaster

Enjoying a nice beer, keeping track on the number and bring some color to the table, this idea came to my mind. Material used: PLA Printer used: Prusa i3 MK3S, i3 MK3S+ and i3 MK4S To achieve perfectly clear numbers the two-color…

Downloads
29
Likes
7
Rating
0
P
PrintablesTobias0530

totally over-engineered vault for precious spirits

I made a ridiculously over-engineered vault built like a heavy steel cylinder with flanges, two lids with matching seals, closed with 12 bolts. The vault can hold 12 small bottles of precious spirits of 40mls each (bottles 32mm diameter,…

Downloads
29
Likes
3
Rating
0
P
PrintablesxSXHCx

learn volume formulas experimentally

With these four models, pupils can discover and learn the volume formula for the pyramid and the cone themselves. They are familiar with the volume formula for the cuboid and the cylinder. They measure the volume of the four solids with…

Downloads
27
Likes
16
Rating
0
P
PrintablesJesusUnoWTF

"Totally Not Smut" Flag Bookmark

Keep track of your totally normal, non-sexual, reading with this special bookmark. The flag post fits up against the inner part of the spine of your book, while the clip attaches to your page. No red flags here, just nice, wholesome,…

Downloads
26
Likes
2
Rating
5
P
Printablestatertacoma

LoRa Wireless Tally Light

This is a Wireless Tally Light system for use with a GPO based switcher Tally. Note: This project is semi-work in progress and probably will be for a while… Scroll to bottom for updates! Story: I go (went) to school for Broadcasting and…

Downloads
25
Likes
10
Rating
0
P
PrintablesBryan Ward

FLAT NetAlly/Fluke Networks WireMapper/WireView Dongle Holder

@blakekrone's original design has been an excellent addition to my Etherscope toolkit, but I wanted something a bit more compact to store the dongles for my LinkIQ. Printed on CoreOne 0.4mm nozzle diameter, 0.2mm layer height, PETG

Downloads
25
Likes
6
Rating
0
P
Printables_bdjester

A "Totally Original Smol Slime Enclosure"

BOM SlimeVR ICM-45686 (This is the accelerometer for tracking buy well) Pro Micro NRF52840 SMD 3*6*2.5 MM Tactile Tact Push Button 10mm width Kapton Tape 401230 3.7V 120mAh Li-Polymer Battery Holyiot nRF52840 Bluetooth Receiver dongle 24…

Downloads
25
Likes
2
Rating
0
P
PrintablesAdam

T.U.O.D.T.D - Totally Unnessecary Overengineered Dishwasher Tab Dispenser

T.U.O.D.T.D Totally Unnecessarily Over engineered Dishwasher Tab Dispenser Dispense your dishwasher tabs with power and purpose! Only usable with tabs with water-soluble foil. Print and use the loader!!! The loader is slightly narrower…

Downloads
25
Likes
10
Rating
0
P

M5 Stack Atom 1/4-20 Camera Mount (TallyArbiter)

A small camera mount for the Atom. Wanted to create a mount that would work with the BMD Pocket Cinema Camera using the ¼-20 mount on the top so the Atom could work as a tally light with Tally Arbiter.

Downloads
25
Likes
2
Rating
0
P
Printableskohend

Sensibo Sky Horizontally Adjustable mount

I have taken the original mount and added 3 cogged wheels to allow for adjustment of the horizontal angle. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Generic PLA Silver…

Downloads
24
Likes
2
Rating
0
P
PrintablesNSmith

Totally Generic Star Pulls

These cabinet pulls use #8-32 nuts! I designed these to have an embedded nut, so I didn't have to screw into the plastic or worry about super tight tolerances. The black dots on top (totally not eyes) were just a color change, and I used…

Downloads
24
Likes
13
Rating
0
P
PrintablesPeter Farell
18+

The source marked this model as adult content.

Downloads
23
Likes
33
Rating
0
P
PrintablesFernando Panin

GoPro action camera arm horizontally and/or vertically

you will need M5 50mm hexagonal screws, M5 Nut and an M5 50mm Allen screw to fix it to the frame near the rear axle.

Downloads
23
Likes
5
Rating
0
P
PrintablesTinkerz

Base support bracket for horizontally mounted fire extinguishers

This bracket is to provide additional support for horizontally mounted fire extinguishers. Originally designed and printed as a solid base but post printing revision added a ring option to save material. Source files in .step and Fusion…

Downloads
21
Likes
1
Rating
0
P
PrintablesNate Walck

Fellow Tally Pro Pulsar and Filter 3.0 stand

This is a stand for the Tally Pro and Pulsar that allows you to measure the flow rate using a Acaia Lunar or similar by allowing you to weigh the drink apart from the entire brew setup. Additionally, a new Filter 3.0 basket stand is…

Downloads
21
Likes
2
Rating
0
P
PrintablesMathieu

"Oops, i've accidentally overdesigned my" RPi3 housing for my Prusa Mk3s

I've completely overdesigned this model to: make it easier removable from the base I wanted to have a sturdy design without backless, therefor made the screwless design in a screwfull design To have female pins for the Pi to minimize…

Downloads
20
Likes
8
Rating
0

AnyCounter: Customizable OpenSCAD Pocket Tally Counter

AnyCounter is a script-driven OpenSCAD model for building compact, reusable counters that can track almost anything: scores, pills, rounds, habits, rows, parts, turns, and more. You choose your value set, case style, window placement,…

Downloads
18
Likes
4
Rating
5
P
PrintablesCullen Webb

4D Gridfinity Universal Holder - Stack anything magnetic vertically or horizontally for easy storage or desktop use

Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension). This specific…

Downloads
18
Likes
9
Rating
0
P
Printablesmofosyne

Analog Mechancial Tally Sentiment Tracker (or Tally Counter Reset Lock)

This converts a cheap mechanical tally counter into an analog sentiment tracker. This is by adding a like button that you would glue to the top tab via superglue and also adding a reset shaft blocker so the random public won't be able to…

Downloads
18
Likes
2
Rating
0

Totally Modular Mobile Wireless Charger - PrintABlock Electroblok Version

Charge your phone wirelessly your way. Standing up or laying down, the choice is yours with PrintABlok. After receiving the charging module in the Alien3D November 2024 box, I decided it needed a better case. And what could be better than…

Downloads
17
Likes
9
Rating
5
P
Printablesgfretz

TallyJour Calendar Module

This model is my interpretation of a classic modular calendar using the original Helvetica typeface. It incorporates built-in pockets to accommodate all of the required blades. The blades use two-colour printing. The type is printed in…

Downloads
17
Likes
2
Rating
0
P
Printables3DTwinkie

Totally-Non-Harmful Factory

This is my "Chemical Plant" inspired model creation from the old pc game "Command and Conquer - Red Alert". A new series I am jumping into, with each unique building being made and colored accurately according to in-game sprites. With…

Downloads
16
Likes
2
Rating
0

Magnetic Token for counting, tallying or anything

This is basically a magnetic token to hemp me keep count / tally. It would be good for anything you might need it for. Works well as a light fridge magnet as well. Note: Price is for 10 tokens. Contact us if you would like more or…

Downloads
16
Likes
0
Rating
0
P
PrintablesJason M.

Tally Light

Tally Light for a camera (wired). The tally light diffuses the light and glows when the camera is active. This tally light holds the components (leds, esp8266, power converter, mosfet, breadboard, power switch, and barrel jack) and can be…

Downloads
16
Likes
1
Rating
0
P
Printablesgfretz

Tally Rx Dispenser

The Tally Rx contains and distributes a 14-day supply of personal medications. It is printed in white PLA in two parts held together with magnets (2pcs - 3mm x 12mm). The opening in the lid ratchets into position when rotated.

Downloads
15
Likes
3
Rating
0
P
Printablesfigterk

Totally impractical nozzle pen holder

This is a totally impractical pen holder modeled after a v6 nozzle.

Downloads
15
Likes
11
Rating
0

Tally Light TPU-Cover for Cerevo FlexTally Set

My friend works in a studio. He was raging about the bad covers for the tally lights. So we designed a new version. Fits perfect for Cerevo FlexTally v2 Set: https://teltec.de/cerevo-flextally-v2-set.html Material: TPU (Fillamentum…

Downloads
15
Likes
0
Rating
0
P
PrintablesTonyRami

ExpandaShelf Horizontally Expanding/Expandable Display shelf (Read Description)

If i can print it successfully on the Anet A8, then you can! Print Settings 0.2 mm Layer Height Shelf Body: 10% cubic infill Shelf Bracket and connectors: 100% infill and concentric pattern for infill & top and bottom layers to save time…

Downloads
14
Likes
3
Rating
0
P
PrintablesSherweld

MMU3 Totally On Top of Core One

The attached files are simply Sams excellent top cover resized to move the spools more to the front thus allowing room for the MMU3 unit to sit and position freely on top. Also there is a small simple sliding cover for the ptfe tube to…

Downloads
12
Likes
3
Rating
0