108 models
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
I needed a organizer for my Tapping tools in metric. All the rooms in the organizer is marked with raised numbers the hight is 1mm. The tapping tool organizer is for M3-M4-M5-M6-M7-M8-M10-M12. > Print materiel used: Sunlu Black PetG /…
Print approx. €8.44–€10.31 excl. taxPreliminary estimate for PETGSource material: PET
Update 1: fixed jaw files were not included, added now. A project ive been working on for some time, the model 301 Tapping Arm is a mostly printed tool to help with tapping. For the past 8 months its been my entire tapping setup,…
Tapping arms keep taps level and supported. I designed this model specifically for using small taps, as small as m1, that will almost certainly break if used by hand. Video: mag chuck video: My smallest test with this tool was a m1 tap,…
These T-nuts are perfect for mounting practically anything to a Skadis pegboard. Kudos to @6d6178 for the original design. I love the simplicity of designing Skadis holders with these nuts because you just need holes in the model for the…
This tool can be used to install click and fit 6mm vinyl flooring. PLA Prusa MK4 0.4mm nozzle 4 perimeter and 30% infill
A v2 of my magnetic vise fixing the uh… numerous issues with v1. Used with steel parts or a small steel based vise to quickly adjust work position while still holding firm. Current files are SPECIFICALLY for use with the tapping arm. Ill…
Use this tool to install click together vinyl plank flooring, specifically Mohawk from Costco. Use a 0.4mm nozzle because of the sharp corners and detail needed. If you use a larger nozzle, the sharp cutbacks will peel when printing, or…
This is a minor remix of the Cheap Yellow Display horizontal stand listed on the github page. Instead of needing heat inserts, this instead uses M3*6mm self-tapping screw. The original file doesn't have a lot of meat around one of the…
Thread tapping guide M3 - M12 Settings: 0.20mm Standard Wall loops: min. 3 ABS / PETG
Making it easy to tap and make holes for the key when building out of 3030 and 3060 extrusions. It uses a 608ZZ bearing on the tap part and a 626ZZ for driling holes. This way the drill does not drill into the jig. I used a "Völkel M8…
A practical handle kit with five different sizes, perfect for enclosures, boxes, or DIY projects. This handle kit is designed for easy and reliable 3D printing and installation without the need for nuts . Each handle allows a M3 screw to…
I started with this jig for 2020 from mjbudden: https://www.thingiverse.com/thing:2764774 But I wanted to be able to use it with both 2020 and 2040, so I removed one of the 4 prongs. This way you can put the side with no insert to the…
Component: 4x M3x15mm 1x M3x10mm 5x Brass Insert Nut Hot Melt M3 4,5mm compatible tool https://vi.aliexpress.com/item/1005006156284423.html?spm=a2g0o.order_list.order_list_main.41.511f1802aVhKKI&gatewayAdapt=glo2vnm
Drilling aid for blind joint holes using the drilling jigs. This helps to keep the holes accurate without fraying the holes. Applicable to 2020/2040/4040 extrusions All drill bushings fit, only the diameter of the hole changes. The…
I've not tested this yet, as I've got to fix something on my printer before I can test and adjust it, but I wanted to get it up. I've designed this with the following in mind: Misumi rails (so m5 tap) These taps (again m5):…
Inspired by Adam Savage's One Day Builds. The guide includes: M3, M4, M5, M6, M7, M8, M9, M10, M12 The tap will slightly thread the guide which adds more stability. I have added 0.1 mm tolerance to each hole. i.e M6 is a 6.1 mm hole. Have…
While waiting for my Core One INDX conversion kit (non-FE) to arrive, I've been reading the forum and noticed that quite a few people have broken the tool holder whilst tapping the two holes. One possible reason for this is not making…
Din Rail Clip for M2.5 Self Tapping
My daughter and wife have been making string art projects for kids in the special needs community. They have to hammer in hundreds of small nails fairly straight and accurately placed. I came up with this nail holder that allows good…
This tapping jig is perfect for making small threaded holes without fear of breaking taps. The jig ensures your taps are kept perfectly vertical for easy, repeatable operations. You can also use it for manually drilling small holes,…
This uses 20x20mm extrusion instead of the 15x15 that is used by the fanreeko arm. For this project you have to buy springs and a 10mmx100mm metal pin. -Metal Pin -Springs Screws, Nuts and washer list -M5x40 (x8) -M5 Nut(x8) -M5 Washer…
Due to tiny dimensions, the thread is self-tapped by the screw, so that the nut retains some holding power. If you need other dimensions, let me know. Height: 2.4mm ____ Version history: v1.0 29.8.2023 Initial release 29.8.2023
Print the lower part with the gap for the blade laying on the outside of the handle, the top cover can be placed with the inside on the bed. Can also be mounted on both sides of the blade to improve cutting force, but reduce usable blade…
Fan guard with feet for holding a 120 mm fan upright. requires self tapping PC case fan screws like in the picture. remix of: https://www.thingiverse.com/thing:1062368 Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20…
Print in two parts, screw together. There's a hidden compartment! Only a small amount of supports recommended(see pic).
This tool will make the aluminium extrusion Tapping a lot easier, it will align the tap bit and will avoid making a bent tapping. How to use: Add 2 M3 screws and T-Nuts to the tool, then slide on the aluminium profile until it stops,…
Notes ■ See the diagram image for explanation of parameters. ■ Chamfer and Plinth (flange) features are added to one or both ends using the Nc and Np parameters respectively. ■ To edit parameters in FreeCAD look for the spreadsheet inside…
I have just started to build a Core-XY printer ( http://www.thingiverse.com/thing:1003119 ) and one of the jobs I need to do is tap a 6mm thread into the end of a number of the 2020 extrusion pieces. Tapping is an easy task - as long as…
An easy printable, the Tesla Self-Tapping Frunk Hook by Toucan21 on Thingiverse. Note: Sample part photos used PLA with 15% infill (not visible) for testing, the original designer suggests 50%. "This grocery/bag hook combines 2 other…
Need to tap lots of hols in the end of 2020 aluminium extrusion? Do you want to make sure the thread starts squarely every time. This jig hugs the slot of the extrusion and is profiled to hold a tap with a 6mm shank. The semicircle design…
Was tired of my boring old shifter knob and decided to make a “better” one. ^-^ One that I can use in my 2nd gen Prius (2008) and on any other m6 threaded gear lever. If you like it or even make one please post it, like, share, and…
This is a remix of the original ratgdo PCB Case from @samwiseg0 along with the awesome remix from @PatrickONeal_471773 that added support for Wago connectors to improve wiring support – Wago connectors will change your life! The original…
These drill and tap guides were designed to assist in accurately drilling and tapping 5mm holes into aluminum profiles, specifically for CNC or 3d printer construction. The guides ensure precise alignment, reducing errors when working…
Angle for self-tapping screw 32 x 21 x 32 mm 6 mm wall width 5 mm hole 3 mm deepening for screw head Print with 4 perimiters, 15% infill (min), 0.2 mm layer
This grocery / bag hook combines 2 other designs for the best of both worlds. It uses the nice smooth and easy printing hooks from Peterkrull and the excellent self tapping system of Motorpixiegimbals. Simply print and screw on to the…
Wanted a pi4 fan that was tall enough for a heat sink and used 2510 fans (it's what i had). Also added holes for 3010. This is meant to be used with the voron back plates that use M2 self tapping screws. I included a tall and short…
Designed with holes in 3 common screw orientations (0/45/90 degrees) to test printing tolerances for best performance of self taping screws.
Printed mine in PLA at 20% infill and works well. Didn't have the socket head screws for the original design so I modified the “holder” part to work with my button head screws. Non 3D-Printed Parts: 4x M3x15mm 1x M3x10mm 5x Brass Insert…
A tapping guide for tapping into the end of misumi HFS3-1515 extrusions. Designed for 0.4mm nozzle printer with a tight gap for constraining the axial aligment of the tap.
I lost one piece of sheet metal nut from shield of adblue tank. I had to replace it :-) Material PETG, 100% infill, 4x perimeter.
A gridfinity bin to hold a complete set of GT12 tapping collet chucks (10 total). M1-M16 Also has a slot for the generic torque adjusting spanner that comes with the set. There was some space left over so I just added a cutout, it can…
This is an improved design of a 3D printed tapping arm for hand taps (Ø12mm shaft), made to be sturdier, easier to build, and more reliable than other versions. Key Improvements: No more loose/wobbly base – Fixed with a single 3×30 mm…
A simple set of guide holes for thread tapping. I've added space for magnets on top so it snaps into place underneath my tap holder , allowing me to easily grab the tap holder and guide block together whenever I want to tap something. I…
We needed the nut that goes on the self tapping screw that holds the chrome trim on the front of a 2023 Chevy Tahoe. Unfortunately sourcing the OEM parts was problematic. I made this design parametric in OpenSCAD so that it can be resized…
Self tapping thread inserts are one of the best way to create thread inserts in 3D printed parts See Tom's video here: Simple accurate and strong, these inserts can be screwed directly into a part. I have included threaded cut-outs in…
I designed the self threading screws featured in the video “Made with Layers” by Thomas Sanlderer in Tinkercad. These threads provide a secure fit for the screws and are easy to get started. They are conveniently mark with the numbers 3…
A adapter from a camera hotshoe (ISO 518-2006) to a 1/4" screw hole, a screw should self-tap into the hole with ease. the hole is ~8 mm tall this design is open to modification on OnShape:…
This is a pair of jigs to assist when tapping and cross drilling 2020 extrusion for blind corner fixing of Voron or similar framework. The DrillTap jig goes over the end of a piece of extrusion. The tapped hole on the end aligns an M5…
A DIY Home NAS Server. A comprehensive DIY kit with all the necessary components and parts are available for purchase at Nouvolo . Notes for 3D printing Dimensions : 167 x 145 x 114mm PETG/ABS recommended Single color for each part No…
Customizable Screw Holes for self tapping.
SG90 Servo Mount, requires 4x M3 Self Tapping Screws for base and servo Screws, MADE FOR A VERY TIGHT FIT, HOLES MAY NOT BE ALIGNED PROPERLY
inserts i use when i run out of m3 heat-inserts. they can than adapt to be used with self-tapping screws (e.g. wood)
These are illustration for the build. The only downside of threaded stem, is that you have to cut them. For this I used a dremel with this setup + a nuts before the cut to redo the thread after. To tight them, I am using 2 nuts: one that…
This is a parametric Fusion 360 model to quickly generate a test object with specified hole diameter that decreases in steps of 0.1mm. Easy to find the right hole diameter for self tapping screws, bolts, inserts and/or press fit axles,…
God I hate power tools. osVAC adapter for using a sharp-tipped self-tapping 3mm screw that can penetrate the machine's connector walls. Print using random Z seam.
I made a keg washer using plastic conduit and bought a ½ bsp die to thread the ends to connect everything together. While it was possible to turn the die by hand it was hard to keep it perpendicular to the pipe. This holder maintains the…
This print allows for resonance compensation tuning using the KUSBA on the Creality Ender-3 S1 with large cooling mods such as the Taurus V5 installed. You will also need: 2x M3x8 screws (replaces the stock M3x5 screws; holes are not…
IMPORTANT: You will either need to add your own threads or undersize the print so the hole of the nut is smaller than the threads. That way it can self tap when screwed on. --------- If you need a nut for any type of pipe this will work…
Printed with 15% infill, 5 verticaal layers and 5 horizontal layers, PLA+. For tapping drill sizes from M3 to M12 M- drill diameter (mm) - drill lenght (mm) M3 - 2,5 - 59 M4 - 3,3 - 66 M5 - 4,2 - 75 M6 - 5 - 95 M8 - 6,8 - 110 M10 - 8,5 -…
Background I bought a cheap set of metric tapping tools from Amazon. They got delivered in a cheap plastic bag which screams for losing them over time. Therefore, I designed this little storage enclosure to keep them organized. Printing…
Printed .3 mm layer hight
1x - M3 x 25mm 1x Insert Nut Hot M3
A clampable block to help you tap straight(-er) holes.
I had a great time putting together the original SKLEP Mk1, but I had to do some drilling to use the M3 bolts I have around, instead of the M2.6 screws it's designed for. When a friend asked me to make one for them, I decided to make the…
This is tapping drill bit holder for the HSW system by RostaP ! Dimensions It fit every drill bit needed for tap from M2.5 to M6. Printing There is suffisant play everywhere so you don't have to scale anything. It can be printed without…
A tapping block is a specialized block used when installing laminate flooring. It is placed against the plank and struck
The original model suggested shortening the screws included with the cartographer but I found they were too loose (and I couldn't be bothered shortening them). This model is identical except it uses M2.3x4 self-tapping screws for…
All credit goes to @fritzpeppone. I only modified the puck base E27 so that screws and threaded inserts weren’t needed, and self‑tapping screws would be sufficient. Use 2,5x12 mm screws. This model contains only base. Lid and strain…
This is a mount for Milwaukee M18 batteries but with larger holes to countersink a self-tapping metal screw.
Generally, bosses for tapping screws installed on the top surface take an overhang shape. Traditionally, to alleviate the overhang, it was necessary to install supports or model the bottom of the boss with a tapered shape. However, these…
This is a branch off of the case that samwiseg0 made for the ratgdo. This case has no mounting tabs or holes on the bottom, which is ideal for mounting using double sided tape. Please reference…
Spacer to make it easier to tap the on-screen button with 10 fingers. Abstandshalter um einfacher mit 10 Fingern auf der Bildschirmtaster tippen zu können. Scale the moddle in the slicer acordingly to your keyboard. It fits perfect on my…
My 10-months-old son really loves to play with things that roll so I've designed him a roller that makes tapping noises when moving. So far he seems to really enjoy it 😊 I've managed to drink a whole cup of coffee this morning while he…
Work in progress. Print in PETG, slide over your 2020 to get some grip while you tap the M6 hole for a blind joint.
The original model by Samuu Borealis is great! I’m gripping the claw and tapping it in a menacing Jurassic Park film manner. A couple test prints later the model was born. 🤣🤣 A light touch is all you need to raise the tip of the claw.…
I just made these a a lazy way to mount circuit boards for a project. use 6-8mm m3 bolts, self tap when screwing through mounting holes on circuit board. The wide base is for gluing to the surface.
This tool will help you align M6 self-tapping sleeves for 4040 I-type profiles ( example ). It makes it easier to get the sleeves working right the fist time you make a cut. Some remarks: Make sure that the 4040 profile has a straight cut…
2.3 mm hole for M3 self-tapping screws
Fits every lamp I have To install- screw on 3d printed part cold first to make sure it goes in straight heat metal lamp screw screw on 3d printed part while still hot (may need to unscrew and reheat metal lamp screw) printed in pla print…
A wall rack for holding Size 1 and Size 2 Tapping heads for Flexarm tapping arms. Also holds a chuck key for a drill chuck. Holds four size 1 and two size 2 heads. Wall mount with #12-#14 screws. Use wall anchors or attach to solid…
This is a simple small case for a couple of taps and a handle that I sourced individually in a local hardware store. My set includes: - Yato YT-2995 (M1-M8 Wrench) - Yato YT-44840 (M3 Tap) - Yato YT-44841 (M4 Tap) - Yato YT-44842 (M5 Tap)…
Uses a M4 heat-set insert (6mm x 6mm) and a M4 screw for securing the chuck. The chuch is made to be printed on the flange, no support needed. Fits an M5 tap, other sizes not tested.
These are simple punches for tapping in inlays in 3D printed and wood objects, and for tapping together tight fitting pieces. There is a wider square-tip option and a thinner round-tip one. They are 75mm long. I made them just big enough…
Holes for screws 3.2 mm. Distance between holes 21 mm. Hole depth 13.4 mm. Dimensions: 60*50*15 mm Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No. Resolution: 0.2 Filament brand: Esun Filament color: yellow Filament…
I bought T8 Z-Axle Lead Screw Nuts for my Anycubic Mega S but didn't recognized that no thread was cutted into it. So i created that simple jig to correct that. It's made for an M4 thread cutter.
Remix of this tapping arm: https://www.printables.com/model/821320-tapping-arm Joined together the body.stl and holder.stl parts in original. Now prints in 2 parts.
j'ai crée ce modèle pour ma femme qui pratique le face tapping sur celui ci il y a un emplacement pour un petit ciseau plusieurs emplacement pour stocker les morceaux que vous avez découper de différentes taille un emplacement pour des…
Simple tapping bit case for 3 pcs set + one drill bit. Inner hole should have about 9mm diameter, outside diameter is about 26mm. If you need set for bigger bits just scale it. I printed it from abs just because a have some, any type of…
These jigs help keep the extrusions aligned so you can cut up to 4 at once for very accurate lengths. The side plates are designed for M5 cap head screws. My extrusions have an M6 center hole but I've included M5 also. Also an alignment…
used a 0.6mm cht with variable layer height and printed with ASA. m3x8 self tapping screws used
This adapter allows manual clean up tapping of modelled 3D printed threads using standard metalworking taps mounted in any electrical or manual screwdrivers with a 4mm AF socket. The 3D model was created in Fusion and uses Parametric…
A Guide for a Hand powered metric external thread tapping with a metric standard tap holder. Works well on soft metal rods such as aluminium, copper and brass. Tougher metals will produce swarf that will quickly wear out the bearings even…
Zero-Play Tapping Arm A remix of Muffelkraft's Improved Tapping Arm with a guide that actually holds the tap holder square. No wobble, no supports. I liked the Improved Tapping Arm, but my 12 mm tap holder rattled around in it. The…
The standard screw holder for the Bambu labs scraper but with smaller diameter holes so that you can use M2 screws. I use it with my printable scraper blades.
Hitting the milk jug on the table (or tapping or banging the jug) is done to break up large bubbles and stabilise the foam after steaming. This step, often followed by swirling, ensures a consistent, silky microfoam for latte art by…
I asked claude to change the lcd supports to print without the holes for the M3 square mounting nuts and instead decreased the size of the screwholes for the screws to be self tapping.
The arms need to be glued in. Can be printed laying flat.
SONOFF NSPanel Pro 120 – 8° Tilt Adapter for EU/PT Wall Boxes The NSPanel Pro 120 is made for US wall boxes, so it doesn’t fit European round boxes. It also sits a bit low to read comfortably at normal switch height. This adapter fixes…
