9,024 models
A small plant pot that I created in 4 different designs. If you want to scale the plant pot correctly, simply insert a cylinder with the necessary dimensions in Prusaslicer and then scale the plant pot in such a way that the cylinder fits…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Print approx. €15.22–€18.60 excl. taxPreliminary estimate for one variant
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
I wanted to strech my knowledge of the 3D design software and I always like a nice fidget. Especially a fidget which suites 3D printing very well. These sphere can easily be printed without supports. After printing it needs a bit of…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant
Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…
Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET
Making is straightforward without any specials ;-) Printed mine in the picture with 0.40 nozzle, 0.20 layer, 3 perimeters, 5% infill of extrudr NX-2 PLA matte white on satin sheet.
Print approx. €9.68–€11.83 excl. taxPreliminary estimate for one variant
A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Print approx. €7.72–€9.44 excl. taxPreliminary estimate for one variant
Frohe Ostern Schriftzug
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for one variant
A mount for installing a Prusa i3 LCD controller on the outside of a LACK enclosure. Compatible with MK2 and MK3 LCD assemblies. Not compatible with MK4 LCD assembly. Description This is a redesign of zamky's Prusa i3 LCD Holder that…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for PETGSource material: PET
Everybody that can sew should be making masks now.... (written 4/4/2020) If you intend to make many masks, a rigid template for tracing and / or cutting can make things easier and faster. This pattern is for the Olson Mask that we are…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Make them earn their Easter candy with this egg maze container. Fun, yet not too difficult, maze to solve to open up the egg and get at what's inside. Printed in 2 pieces with 0.4mm nozzle and 0.16mm layer height. Supports optional.…
Print approx. €5.77–€7.05 excl. taxPreliminary estimate for one variant
Coaster with a japanese wave pattern loosely based on the idea from https://www.thingiverse.com/thing:4823069 Put a color change in at 2.00 and 3.80 to use different colors. If you use Octogram Spiral as the top and bottom fill pattern…
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for one variant
Updated the file to provide a better fit! Based on: https://www.printables.com/model/65918-airtag-wallet-card
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
Included g-code includes Hilbert Curve top fill and bottom fill, as well as ironing to produce a nice, smooth surface.
Print approx. €3.70–€4.52 excl. taxPreliminary estimate for one variant
Twisted Lantern Lampshade Lampshade for E14 lamp socket or vase cover. Printing: The lampshade was printed with one perimeter in vase mode. The light mount adapter is also printed in vase mode. For E14 socket a negative volume was…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
I wanted to make these rollers for a while, and finally looked into how to do it properly. By properly, I am referring to using User Parameters in Fusion 360 and constraints in the drawings. I printed them solid, and at half scale. I have…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
A simple filament guide that I created for an ender3v2. It slide in the top V-rail
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
I wanted to see how the different infill patterns look, so I've prepared a collection from all options in Prusaslicer. 16 pcs of hexagon, each with different infill - and they look really great! I've attached the prusaslicer project and…
Print approx. €1.55–€1.89 excl. taxPreliminary estimate for PETGSource material: PET
A very simple cover to use a cosmetic tissue box available in the supermarket with a fancier look. The cover is bottomless and designed to put only the cover over the box. I measured my tissue box beforehand and then scaled the cover in…
Print approx. €13.77–€16.83 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.
Print approx. €4.67–€5.71 excl. taxPreliminary estimate for one variant
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for one variant
Have you ever wanted to find out the size of something, but instead of using pesky units like inches or centimeters, you wanted to use something much more REAL? Well, then this is the measurement tool for you! This International Standard…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
This is a slight modification (added text, print settings, etc) and print preparation for printing your own 3D Printing Settings sample box featuring various Infill types, Finish types, and Surface pattern types. The following Patterns…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
UPDATE3: Uploaded STEP files and F360 files. UPDATE2: Updated model that uses a standard 4-hole punch (80mm between all holes) UPDATE: I have created a model that fits the original Prusa hole pattern (60 mm between the middle holes and…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
Get ready for winter with this stunning lantern, designed to brighten up any space with a warm, festive glow. With a modular design, this lantern can be printed in a variety of colors, allowing you to create a unique look. Each part is…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
This is the low poly design of the modular lantern LR2268. It builds the project’s base and contains the frame, lid, pole and foundation. Use these with one of the side panel prints to create a small candlelight or a complete lamp with a…
Print approx. €4.98–€6.09 excl. taxPreliminary estimate for PETGSource material: PET
Hello community 25cm Version Here's another sweet Easter bunny with Frohe Ostern My wife and daughter love him.
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
Holes a 4mm wide You will need a 4mm bolt and nuts. Bolt should be 20mm long as the pieces when assembled are 15mm thick. Should look amazing if resin printed. Enjoy!!
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
Print approx. €15.68–€19.17 excl. taxPreliminary estimate for PETGSource material: PET
A rose for every woman in the world! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Ironing: Topmost surface only Languages available: Portuguese, Czech, Spanish, English, Dutch, Deutsch, Italian, Romanian, French, Dansk…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
A Yukimi type of stone lantern ( ishidōrō ) in low-poly style. Default size is set to be a miniature in ~1/12 scale. There are five parts: Feet Holder Lantern Hat Top Support materials are not required if printed separately. Download the…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
IKEA SKADIS Shelf with Honeycomb Pattern Dimensions of the bottom part of shelf (plus outer brims and hooks..) 20 x 120 mm 30 x 120 mm 30 x 160 mm Sliced with the modifier to expose the infill pattern You can freely change the infill…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A tiny Jack-O’-Lantern Buddy for maximum Halloween fun! Use tree supports and back seam position. ✅ Just 10 mm tall – the smallest pumpkin buddy 🎃 ✅ Perfect for hiding around the house for spooky surprises ✅ Works great as part of the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
An alternative plate for the modern spiral planter by SchulteGeileTechnik. Like and download his awesome model and leave a like as well. My print is larger version of the original. Therefore the plate has a inner diameter of 73 mm. It…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This one was tricky! I wanted to combine the upcoming holiday with the vase competition and add my twist! This spiral vase includes an integrated handle that can be easily detached to make the vase into something more. Pop the handle into…
Print approx. €2.63–€3.22 excl. taxPreliminary estimate for one variant
This is a reinforced internal 90° connector for 2020 V-slot aluminum extrusion profiles . It fits snugly inside two intersecting profiles, joining them at a perfect right angle (90°) with a secure snap-fit / friction-fit connection . This…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Recommended to print with 4 walls, Color change at 9.2mm…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for one variant
A Quick and Dirty MMU remix of DiPT's smoothed arachnotron figurine. Print instructions This will require some patience while removing supports.
Print approx. €13.54–€16.55 excl. taxPreliminary estimate for one variant
Honeycomb pattern handle. Use two screws to secure it in place. Print Settings: Material: PLA, Layer height: 0.20mm Supports: no Perimeters: 2 Infill: 15% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
An adjustable strap attachment which allows you to add a sternum/chest strap to a variety of backpacks.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
Waffle pattern handle secured with M4 screw and nut. Print Settings: Material: PLA, PETG Nozzle: 0.4mm Layer height: 0.30mm Supports: no Perimeters: 2 Infill: 10% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
This is a storage box, to store 50 22LR cartridges. The box is a very simplistic design, but it incorporates a smart layer, that will elevate every alternate row of cartridges such that it becomes easier to pick the cartridges from the…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for PETGSource material: PET
Frohe Ostern Schriftzug Buchstabenfarbe frei wählbar.
Print approx. €8.24–€10.07 excl. taxPreliminary estimate for one variant
It's also available a version without the electronic. The lantern will react based on what your're doing while wearing it on your belt. It will stay turned off while your'e just standing still, but the scoutflies will start to react in…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
The faces are printed one by one and connected using pieces of 1.75mm filament threaded into the hinges. The diameter is roughly 21 cm. For testing purposes I uploaded a small version. The fusion360 model can be easily modified. Read…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant
No supports needed! This is an alternative d4 that deviates from the standard triangular pyramid design and uses a 3d kite-shaped diamond instead (or two square pyramids bottom to bottom if you prefer). This design is usually easier to…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Hand Vise to help hold small parts and get your fingers out of the way. Three Jaw profiles included: 6mm max opening, Flat 10mm max opening, Flat 10mm max opening, Round I've included a 3d printable nut and bolt from…
Print approx. €3.59–€4.39 excl. taxPreliminary estimate for one variant
I bought the stepdown USB modul on ebay. Search for “ stepdown USB modul ” an compare the images. I updated the part, the new board size is 19,2mm x 38,5mm Need one M3x6 screw. I mounted it on the right PSU, there is a free power port and…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for PETGSource material: PET
Organizer for 2.5" External HDDs and SSDs – Compact and Efficient Storage Solution Keep your external hard drives and SSDs organized and protected with this custom-designed storage organizer. Built to securely hold a variety of drive…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for one variant
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
140 mm fan grill with hexagon pattern
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Details After my first vase model I wanted to create something with a finer pattern. This time I used some spheres to emboss/deboss the surface. I played a bit with the radius of those spheres and it produced this wavy pattern. Dimensions…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
I had a need to run and secure a power cable on the outside of my Original Prusa Enclosure. I designed this zip tie mount for that purpose. It has an inset for an M3 nut. I used a M3 x 4mm socket cap screw to attach to enclosure. Print…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Flowerpot with pyramidal patern internal dimensions: diameter bottom 80mm diameter top 100mm height 75mm
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for PETGSource material: PET
When you are camping at night, it is really useful to be able to hang your lantern in your pop-up tent. This bracket attaches to the post and stays secure with a simple wedge fit. The bracket arm extends diagonally into the tent so your…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for one variant
This enclosure fits a (video) doorbell transformer that uses a DIN rail. Not always there is enough room left in a fuse box. This box/enclosure, has a 35mm DIN rail inside and has fits a double width DIN module. You can print it without…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
Christmas decoration for your windows, walls,... Designed using TinkerCAD.
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
There are 3 other ornaments in this series – a finial, a topper, and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me to stay up to date. I've provided my PrusaSlicer project files (3MF) and GCODE…
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos. Brim and support on build plate only are required. The replacement ring require to remove the existing (often broken) boosters' fixations. I did use a…
Print approx. €1.19–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
Last update: 16.5.2024
Print approx. €4.44–€5.42 excl. taxPreliminary estimate for PETGSource material: PET
Printed with 5x PLA. If you want to use it with less heads take the .3mf file and change it to your liking. Print time is very short on the Prusa XL (<90 min).
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
A quick remix of @SoloTSi97's excellent FireBoard 2 Minimalist Case, with hood and small internal mangets. I sometimes run long cooks and although the FireBoard 2 is “weather resistant," I wanted to add a hood to keep rain and direct sun…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for one variant
Disclaimer: I started this project a long time ago and learned a lot about modelling in the meantime. This means that the model isnt as well done as other newer ones, but i still wanted to publish it, in case someone else would like to…
Print approx. €6.16–€7.53 excl. taxPreliminary estimate for one variant
I love to print this model tilted so it has the most strenght in the inside cilinder. Raise the number of shell layers so the whole knob is solid. I uploaded also a «simplifyed» version because the original has too many triangles for what…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Here is a sheet of the hoodoo hex pattern, wilI l update it with a few sizes and the parametric model when done.
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for one variant
Added a short thread to the Bottom Cap so the Cap can be put on the bottom without removing the Metal Mesh. Print instructions Place it on the print bed with the outer thread to the bottom side. To avoid having supports in the thread…
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
I designed this lantern when we needed a quick and simple St. Martin lantern for our little one — and I wanted to see how such a project could be made efficiently and with minimal material using a 3D printer. The result is a versatile…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
I use it for vitamin C dosage. 1 spoon = 1000 mg Používám ji na dávkování vitamínu C. 1 lžička = 1000 mg Note: If you like this model (which is not behind a paywall) you can buy me a coffee.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
These tags demonstrate 10 different infill patterns. I've found them useful for teaching, especially beginners. Fastest way to fab: run the gcode on an i3Mk3S/S+ For other printers: load the .3mf file in Prusaslicer as a “Project”. That…
Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant
This design has complex geometry reminiscent of an old lantern. Rotate it - it looks different from every angle! With my settings, it weighs almost nothing. This is the second in a series of four lantern ornament designs. This season, I…
Print approx. €4.14–€5.06 excl. taxPreliminary estimate for one variant
Simple tool used to compress the plastic standoffs that hold Bally/Stern boards. I find it easier to use than needle nose pliers. Just press the tool over the standoff to disengage it from the board and gently pull the board off with the…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
Stern zum aufhängen an den Weihnachtsbaum oder als Dekoration. Die Seiten der Dreiecke sind 10cm lang.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Fun decoration for the Chinese New Year. I generated the picture by DALL-E 3 and made some manual editing. I printed at 0,2 layer, color switch at 1 mm.
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
No supports or glue needed. Snap the pieces together and go. Use origami paper, or other nice paper for the screens, for a more authentic look. 3 Rib designs and 2 screen designs to choose from. Assembly instructions are forthcoming.
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for one variant
Moody 2.1 alternativer Halter mit LED Beleuchtung für die Satelliten - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine alternative Halterung für das Moody Soundsystem 2.1 entworfen. Ich wollte die Satelliten von…
Print approx. €3.76–€4.59 excl. taxPreliminary estimate for one variant
A different “glass” insert for my Classic Lantern. Made in a leaded glass style.
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
I used PETG but you can use PLA also. Use contrasting colors to make the decor stand out. You can use acrylic markers for some vintage touch.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
PLA Füllung 15% Schichthöhe 0,2mm ohne Stützen, ohne Rand
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for one variant
Long story short I'm making parties and I have gogos dancing in harness. The theme was super hero so 🤷🏻♂️ Here we are 😁. Made to go with this harness (aliexpress, not sponsored) . Pair it with my Green Lantern Ring for a better effect.…
Print approx. €8.34–€10.20 excl. taxPreliminary estimate for one variant
I print it in PLA 0.3 mm high layer 80% fill in the few layers to make it strong
Print approx. €2.43–€2.96 excl. taxPreliminary estimate for one variant
Great for remembering the last time we watered the flowers at home. Pokud potřebujete české názvy, skvělý remix je zde: https://www.printables.com/cs/model/269994-eternal-desk-calendar-czech
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
What? The windows on the oldest Playmobil Western Houses like 3421, 3422, 3423, 3424, 3425, 3426, 3427, 3428, and 3430 sometimes break. These two piece allow for repair. 3D-print I print it with organic supports on build plate, though it…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Ein Weihnachtsstern als Weihnachtsbaumdekoration. Zusätzlich individuell gestaltbar, in meinem Fall mit dem Schriftzug “Merry X-Mas” mithilfe eines 3D-Druck-Stiftes nachträglich ergänzt. Auch als Geschenk für Familie und Freunde geeignet.…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for one variant
Kleine zarte, herzige und dezente Ohrringe für Ostern. Gemacht mit PLA in 6 verschiedenen Farben. Beim Drucken als Haftung Brim verwenden, und als Support habe ich Tree verwendet. Small, delicate, sweet and subtle earrings for Easter.…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Made this folklore inspired planter to fit small shelves I have at home. Pattern is inspored by house paintings and embroideries from Čičmany . I have issues printing right outer corner of tray properly and so far I did not find reason…
Print approx. €2.52–€3.08 excl. taxPreliminary estimate for one variant
Upload of my model created in October 2024. It was printed on a Prusa Mk3S+ and since printed on a Prusa Mk4S. All I have done here is take the excellent Rack for External Toshiba HDD Drive by @dronestationpro and modified it to fit all…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
Create your own spooky pumpkin patch with this jolly jack-o-lantern! Black PETG remains fully opaque with just two layers (at .2 thickness) Scale to any size and tape/glue to any surface for an instant Halloween accentuation
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
You can fix the holder with two screws on a surface. The holder is fine for fire extingushers with 7.5 cm diameter. You need some support material to print the holder (please see the attached pictures). The holder is designed with Fusion…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for PETGSource material: PET
Schild zum Aufhängen mit Löchern - Frohe Ostern
Print approx. €1.81–€2.22 excl. taxPreliminary estimate for one variant
Hey ich hab einen kleinen Klapp Korb gezeichnet weil mir die verfügbaren zu schnell kaputt gegangen sind, nachdem sich ein paar Community Mietglieder für den Boden eine Verbesserung gewünscht haben hab ich diesen angepasst und das Model…
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
I remixed the "Base_Card_Deck.stl" from 3D Printy my magic the Gathering deck. The box easily fits 100 sleeved cards plus sidedeck. I would use the “Support on build plate only” function of your slicer for printing these modells. Update:…
Print approx. €10.39–€12.70 excl. taxPreliminary estimate for one variant
Lectern to be made out of 4 parts which can be mounted to a strong lectern and can be dismantled simple for transport.
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
This is a set of offset guides that can be used with the, "FastCap Long Nose Marker". The “core part” will give a ¼" offset. There is a ½" and 2" guide that the core part will slide into. You can see what I mean in the section photo. You…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
![Filament Sample Box w/ Infill, Fill Patterns, and Finish Types [REMIX]](https://media.printables.com/media/prints/549902/images/4418204_cc329943-2227-45f1-807c-9f0d489720d7/pxl_20230810_151038751mp.jpg)
