3,781 models
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4 *** New case for Raspberry Pi Touch Display 2 *** Updates Alternative top case part with additional slot for camera ribbon cable, see subfolder "case top v2". Features Internal fan…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Update 25/08/2023 v1.2 added - access for heat break setscrew created, small amount of material added on the fan-side of the grille near the bottom to ensure proper clearance to heatsink fan. Update 11/04/2023 v1.1 added - probe bracket…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
LCD cover that works with the awesome Hyperpixel 4" touchscreen. No fitment issues from other similar covers. This is for: MK3/MK3S/MK3S+ Letters stl is also included if you want to make this a multi color print. Update 2021-02-06: I made…
Print approx. €5.93–€7.24 excl. taxPreliminary estimate for PETGSource material: PET
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
This is a replacement LCD cover that provides a mount for the excellent 4inch HyperPixel capacitive touchscreen. The screen slides under the holding clips snugly, gently bend the part to slot the screen under the second set of holding…
Print approx. €6.23–€7.62 excl. taxPreliminary estimate for one variant
A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…
Print approx. €5.70–€6.97 excl. taxPreliminary estimate for one variant
*** New case for Raspberry Pi Touch Display 2 *** Required models from 7" Touchscreen case for Raspberry Pi 4 + internal fan Display case >> rpi4-display-case Stands >> rpi4-stand Fan mount >> rpi4-fanmount Print instructions See 7"…
Print approx. €1.83–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE Added a slot in the top half for Raspberry Pi Camera module https://youtu.be/lVM0vg\_LYkY Learning Guide: https://learn.adafruit.com/3-dot-5-pitft-octoprint-rig/overview OctoPrint & Raspberry Pi This project adds a touch screen…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
I designed yet another No Touch Tool, did it retractable because if the areas that may touch contaminated surfaces are not enclosed somehow they may contaminate others like your pockets or your hands after it has been use. This tool is…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for PETGSource material: PET
Plate mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . Features Thread inserts Display…
Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 5 *** New case for Raspberry Pi Touch Display 2 *** NEW: Alternative slim version for the new Raspberry Pi Active Cooler Required models from 7" Touchscreen case for Raspberry Pi 4 +…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
Used to mount the hyperpixel 4" touchscreen display alongside the MK3S LCD outside the lack enclosure. I used a raspberry pi 4, no cable extensions needed for the prusa lcd screen. Line the bottom of the mount base flush to the bottom of…
Print approx. €4.12–€5.03 excl. taxPreliminary estimate for PETGSource material: PET
The shown rollbar frame was sliced using the standard 0.15mm settings from Prusa Slicer and printed using Prusament PETG. The left and right side were printed separately without any support. If you are advanturous, you could try the…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for PETGSource material: PET
V-Slot profile 2020 mounting bracket for 7" Touchscreen case for Raspberry Pi 5 + slim version , 7" Touchscreen case for Raspberry Pi 4 + internal fan or 7" Touchscreen case for Raspberry Pi 3 (B/B+) + internal fan . STL-Files for…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for PETGSource material: PET
Simple bolt used to hold the screen in place for the Gaggiuino
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Angled stand (22.6 degree elevated) for a Behringer X TOUCH ONE control surface.
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
Re-modelled and extended to cover the battery hat I use.
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
Touchscreen stylus with hanging loop
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
This model is not difficult to print, but it is rather difficult to use. First, you need a TTP223 touch sensor (very cheap on Amazon) that will fit nicely in the center of the switch. Then you need to solder a 28awg wire to the sensor in…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
The Modular Air Duct system is exactly what I was looking for my BIQU H2. However I had a Creality CR Touch instead of a BL Touch. This printable is remix of the BL Touch in order to support the different connection port of the CR Touch.…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
I have my 7" Raspberry Pi Touchscreen oriented vertically which does not work well with the original case design. Uses 4 M3x12 screws to attach using same mounting holes as the case. Made to provide access to all necessary ports, but USB…
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for one variant
This is a desk stand for the “TouchBar” generation of MacBook Pros to run them in clamshell mode (i.e. with closed display). This should fit any 13" and 15" MacBook Pro with TouchBar (including the M1/M2 13" models). It will definitely…
Print approx. €6.86–€8.38 excl. taxPreliminary estimate for PETGSource material: PET
The touchscreen stand from McMatt ( https://www.prusaprinters.org/prints/15208-raspberry-pi-touchscreen-stand ) is great, but unfortunately only for one orientation of the screen. I have adjusted the support lip of the screen and the…
Print approx. €3.29–€4.02 excl. taxPreliminary estimate for one variant
Case for Raspberry Pi 7" Touchscreen and Raspberry Pi 4. Should point out that the source CAD file is not my own work. Also that this is probably quite inefficient in terms of filament usage What I did modify was to make the slot for the…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
cruise control for bikes without it, for 22 mm handlebars but you can scale it. i have not printed it so i dont know if it will work in pla. i reccomend putting some tape or something rubber on the handle bar to not damage it.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
its a little tool for people that need a holder for their hammers on their belt. i printed in 02mm and its quite strong. it does need support under the clip because its not down to the ground due to a math mistake that i have not fixed it…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
I created this model for the following reasons: Most mounts available are not made for use with Volcano. This design has the BL touch mount height appropriate for the additional length of the Volcano. The mounts that use the roller bolts…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Remix of BLTouch Cover w/bottom light block to work with Satsana 5015 Fan Duct with BLTouch Shortened the top and flattened the round protrusion. Print Settings Printer: Creality Ender-3 v2 Rafts: Doesn't Matter Supports: Doesn't Matter…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
WATCH IN ACTION: https://youtu.be/DJhv8JvJUME WHY: This was made to be able to touch objects such as buttons or electronic screens that might have been in contact with bacteria or viruses such as COVID-19. With research such as…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
A mount for Adafruit 5" touch display ( https://learn.adafruit.com/adafruit-5-800x480-tft-hdmi-monitor-touchscreen-backpack ) suitable for use with octoprint/octodash or other purposes. Note, if you're looking at buying a touchscreen, I…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for one variant
The TC420 and TC421 are very nice and relatively cheap LED controllers for fish tank / aquarium lights. However, there is no cover at the connections, so I created a two-piece cover. The lower part will be screwed in permanently. The…
Print approx. €1.62–€1.98 excl. taxPreliminary estimate for one variant
My 3D-printer is connected to a socket distributor with switches. To protect the switch against unintentional touch, I designed this protector. It has to be glued around the switch.
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Made an attachment for the OrbitKey mat system for the Clickable TouchID case ( https://www.printables.com/model/355924-c ). Needs 5x 6x2 magnets to make it stick to Orbitkey desk mat rails I printed in PETG, but no reason any other…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for PETGSource material: PET
Basic board cover allowing to select the right button by touch to control Advanced Filtration System or White LED Strip . Printing does not require supports. I have added two project files that allow for further easy fine tuning of hole…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by models already published on the contest page, here are three tools for grabbing pens, turning on the lights, and opening (most) cabinets. Enjoy! Print instructions Print with supports everywhere if you want to ensure good…
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
Introduction: I use openHASP at several wall switch locations in my home for scene, light and appliance control via Home Assistant . I find it cumbersome to touch the 2.4 inch ILI9341 touchscreen at the correct spot, and I am sure I am…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Overview A simple enclosure for the xtouch P1P/S interface by xperiments: https://github.com/xperiments-in/xtouch This version houses the ESP32 touch screen in a way that replaces the standard printer controls, but swivels up out of the…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
These cabinet knobs are pleasant to the touch thanks to spiral narrow ribs all around. There are five basic shapes (3 bigger and 2 smaller) in the back-mount version (A1, B1, C1, D1, E1) and same in the front-mount (A2, B2, C2, D2, E2)…
3DCREATION This is a remix of Satsana fun duct optimized for use with stock fans. UPDATE --> VERSION v2 WITH MORE SPACE FOR X ENDSTOP Main benefits of this model: no need for support easy to print weight 60 grams ready for…
Easy to print solid Raspberry Pi 2 or 3, Official 7 inch touchscreen case. I wanted to keep the black bezel look of the screen and not making it bigger. You will need 4 M3x6 or 8 screws to secure the back cover. There is room inside for…
This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the CR Touch probe inline with the nozzle on the Y axis producing a zero probe offset. Many people are having issues with automatic bed leveling…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
A simple cover for the SAGROTAN soap dispenser. By the way, you can find a shelf for wall mounting in my 3D models . IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT.…
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
Special features The Extruder Fan Cover can be removed independently (no need to also remove the BLTouch mount), thus maintaining the probe Z offset Optimized cable placement. Small and sturdy design. Updates 3 February 2023 - Lowered the…
I needed a holder for my Brother P-Touch H100 to mount it to the wall or the side of a cabinet. As I didn't want to drill holes into the furniture I designed it with a hook that can be attached to the side of a cabinet - or as in my first…
The CAD files and renderings posted to this website are created, uploaded and managed by EA3D community member. This content and associated text is in no way sponsored by or affiliated with any company, organization, or real-world good…
Apple introduced the Magic Keyboard with Touch ID in 2021 for Apple Silicon computers rocking an M1, M2, etc. That's all well and good, but for those that preferred keyboards that are actually good, many resorted to taping Apple's…
ESP32 2.8inch Touch IPS CYD LCD Screen Case I recently purchase this screen from Ali Express. It has a very unimaginative name "ESP32-2432S028R" which makes it hard to find. For that reason it is also known as the Cheap Yellow Display CYD…
Reference model of the 7" Raspberry Pi Touch Display 2 based on the official drawings and measurements of sample unit. Provided in Solidworks (Original), STEP, and STL (with and without a Pi 5) Pi 5 model is not mine, it is from Elecrow .…
This stand is loosely based on some other simplistic designs I've seen for the original Touch Display, but it is based on the new dimensions of the Touch Display 2. It is a simple leg design that you print twice, and it has a cutout in…
The silicone tube/cartridge/cartouche cap helps silicone is not drying after usage See also the version with protector for cartridge and applicator: https://www.printables.com/model/1135314-protector-for-silicone-cartridgecartouche-applicat
This is the mount I designed to house a Raspberry Pi and display in the wall to control my Smart Home. The idea was to get a flush, professional-looking installation that makes the display feel like it was always part of the wall —…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
This is a set of different-sized touch screen pens for resistive touch screens. Uploaded right now are models with tips sizes 2mm, 3.5mm, and 5.5mm depending on your specific need. All designs are 110mm long and have a hole on the end for…
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Basic Description This is a remix of a CR-Touch mount. https://www.printables.com/model/255096-sprite-extruder-ender-s1-pluspro-cr-touch-mount-fo I redesigned it for my Ender 3 S1 Pro. Reasons for remix The original had its X-offset…
These models have been derived from the existing designs by Voron Design, thanks so much to the Voron Design team for the massive effort put into these excellent machines. Centralised BLTouch mod for Voron Afterburner (AB prefixed x…
Display case and stand for Raspberry Pi Touch Display 2 and Raspberry Pi 5 I have not tested with a Raspberry Pi 4 - it might need some tweaks so if this design is popular I'll do one that fits a Raspberry Pi 4. Easy to assemble - just…
Introducing the redesigned xLCD cover, seamlessly integrating the display flush with the front face for a sleek look. Equipped with a next-gen RGB LED diffuser and compatible with default Prusa xLCD printed supports. Tested on various…
I wanted a wall mount that would hold the Quest 3's controllers without risk of them slipping out or getting damaged. Settings used: Layer Height = 0.20mm Walls = 3 Infill = 20% Supports = On Brim = On Small amount of support required for…
This is a gridfinity native Brother P-touch TZe Label Tape storage box. This can store tape cartridge larger than 12mm.
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
You shoul use a 4 M3x10 screws to secure a screen to the case.
This thing is a reference model of the Official Raspberry Pi 7" Touch Screen Display. The parts modeled in this thing are available here: *This site contains affiliate links for which I may be compensated Official Raspberry Pi 7"…
The earlier posted configurable floor stand - customized with a “don't touch” message and your name (1250 names are included). Print instructions Print without supports, change the filament color at 4.8mm while printing to get a well…
This is a modified remix of the Satsana Fan Shroud/Duct by eric-anastas for the Ender 3 Pro. This shroud is modified to fit with the Creality CR-Touch touch sensor, using the standard hardware that comes with it. Printing: Take note of…
This is a small protective case for the following Sunton board: ESP32-2432S028 Note: You'll need 2x M3*4 bolts to attach the PCB to the casing. If you are looking for additional electronics projects, checkout the following page:…
This Creality Sprite Extruder backplate relocates the CR Touch probe to X=-47mm, Y=0mm. This allows the bed mesh to be more accurate along the Y axis because the hotend lines up exactly with the probe (useful if the Y extrusion is…
In this video I walk you through the process by which you would install a BLtouch or CRtouch module onto the Creality Ender 7 printer. Currently, there is not much information available online for this modification as it seems the Ender 7…
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
100% infill no support PLA/PETG
Heads-up News Note: I have included my OrcaSlicer project files for illustration of where support blockers were used. If you wish to use them to print from instead of just for seeing what I did, then, if you don't have the Klipper Mod…
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
If you find this thing useful, please consider sending a tip. :) https://paypal.me/cdsmakestuff Dual Cooling Fan Upgrade with BLtouch Mount Fits Creality Ender 3 (OG) and Ender 3 Pro Ender 3 V2 Version here Why another? Well I tried a lot…
The Creality Spider hotend requires the probe to be lowered in order for it to work. I made this quick design to compensate for the Spider hotend size difference. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports:…
Caulking Gun Nozzle Unblocker / Nettoyeur canule cartouche silicone
The Ender 3 S1 Pro comes with a sprite extruder, which is overall not a bad piece of kit. However, the probe is mounted quite far away from the nozzle on the Y axis. This makes it impossible for the bed mesh to correctly account for any…
The other ones from here didnt fit for me, so here is the better one. Print Setting layer height preferred is 0.3 but 0.2 also works swap 1.2 swap 2.2 Color yellow black red (or any other you like) Credits: Sent the Author an mail if he…
Replacement backplate for the Creality Sprite Extruder (comes with Ender 3 S1 / S1 Pro). This backplate allows you to line up the CR-Touch probe with the y-axis of the nozzle. This has solved a lot of bed levelling issues for myself and…
If you don't see a gif animation here, then something broke, or you are blocking it. Turntable is 33cm. Photo 4 shows pretty well how bright the default top with the 17cm LED COB is. If you make one, consider uploading a picture. It's…
This is a fix for broken for the Flashforge 5M that are notorious to be fragile and break. This can be printed out. It fits under the back cover to hold it into place and is just a bigger version of the original design. You will have to…
Front bezel and rear case for the 10.1" Raspberry Pi touchscreen sold by pidisplayconsole.com and other similar units. I have seen others that look identical but I don't know brand names. I printed this using Hatchbox PLA on the Bambu X1C…
Features 26.11.2021 updated added duct with stopper at fan hole 18.2.2021 updated the fan duct for more spacing around the nozzle. BL touch standard parts flow optimised separation of hotend and nozzle coolin I wanted to have an easy…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
This is somewhat a remix of a remix. Crosslink did a remix for the Ender 3 V2 of 3D_LC's mounting plate . I didn't like to use the roller screws to mount this neither did I have any use for the cable routing channels as they can only be…
A new version with a different thread and some fixes. If the outer diameter of your outlet is 12.2mm (the part without the thread) this should work. Do not use much pressure on the bag, First gently squeeze the container to get some air…
This is a modification: https://www.thingiverse.com/thing:5146836 The original was too tight and the cartridges did not fit. I printed 0.3 (because I wanted it fast), but 0.2 is better. Tape 6mm = Tape 9mm = Tape 12mm. PLEASE SEE MY OTHER…
Dragon Burner remix for BLTouch/3DTouch. OnShape: https://cad.onshape.com/documents/f649feacb89f1004466cba88 Offsets (from OnShape): X: +32.950 mm Y: -10.718 mm
Spacer for the CR TOUCH Creality Ender 3 V3 SE sensor, after installing the Creality K1, KE, K1 Max hotend, you will need to lower the sensor 6.5 millimeters down. This adapter is easy to install without damaging the parts. All the best…
Overlay for the Behringer X-Touch universal control surface when used with the XR32 or XR32 rack mixer. The overlay is used to label the X-Touch buttons with their proper names when using the X-Touch with the Behringer XR32 mixer and…
My friend bought a Raspberry Pi 7 inch Capacitive Touch Screen HDMI Monitor. He wanted a case and stand for it. I found a case for a similar monitor and remixed/remodeled it to fit. I made a lot of improvements to the case for printing…
(Deutscher Text: Scroll 'runter...) -- UPDATE - 06. December 2025: I updated the model: made it a bit tighter and the clip has now a bit more grip. When I designed this over five years ago, I printed it on a TEVO Tarantula with way too…
LCD panel that works with the awesome Hyperpixel 4" touchscreen with Raspberry Pi4. This is for: MK3/MK3S/MK3S+ and Pi4 Yet another remix of the 4” HyperPixel cover for the Prusa MK3S+ for the Pi4 to be used with Octoprint and Octodash.…
I needed a simple stand for an additional Home Assistant Raspberry Pi kiosk I am adding to my home – so I whipped this up. You’ll need some 2.5mm screws for assembly (I used socket head cap screws). Add some rubber stick-on pads to keep…
This mount goes onto the Sprite extruder, and makes the CR touch inline of the nozzle. I.e it makes the y offset of the probe 0. New offset is- (-55.5 , 0) You will have to update the firmware with the new offset values. Also, this model…
