4,153 models
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 🦊🍂✨ I’m so excited to share this adorable Flexi Baby Red Panda with you…
Stay Puff Marshmallow Man.
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Shuffles double-sleeved Magic The Gathering cards, or another variation that shuffles single-sleeved It's A Wonderful World cards. Instructions for Magic The Gathering Shuffler Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm…
One Piece is my favorite anime, so I made this 2D plate of Luffy that I'll be using to make a collage of my favorite characters as a wall piece! Be sure to include a color switch for the effect below, or download the .gcode file as that…
Luffy : Gear 4 : One Piece.
My favorite movie vehicle ever! DeLorean from BTTF and Ready Player One. www.youtube.com/wekster
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
I made this credit-card size cuff link card for the Prusa Fashion Contest. Ever had one of those moments where your shirt needs cuff links, but you packed in a rush and you left them at home? This print is designed to solve that problem,…
The collection container solves the problem of the low drain height. The container was designed so that all the water can be drained at once, and it's still possible to lift the tray without spilling anything. A slightly smaller version…
The design is my own. Its easy to print, with no supports. If you need feel free to glue parts together. Default file are 7x5 bottles (maximum Prusa i3 print bed) and 20 degree stand. If you wanna change number of bottles or degree of…
Looks like the Rusty Bucket from Ben 10 but it's actually Eagle 5 from a Star Wars parody - Spaceballs! Check out my other stuff in my patreon page www.patreon.com/wekster and on my youtube www.youtube.com/wekster
August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…
Cheep Cheep the Puffer Fish from Super Mario Brothers.
Hold your chopsticks together until it's time to eat, then keep your table clean with this dual-purpose chopstick cuff holder and rest. Add a touch of elegance to a dinner party or just prevent losing your chopsticks during a meal on the…
X-wing from Star Wars www.youtube.com/wekster
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
This modified/kit-bashed buffer segmenter (front plate) for the MMU3 cassette buffer, in combination with @Melvin_131612's excellent MMU3 buffer mount allows the buffer to be mounted horizontally, lying down on its side. I made this…
I added slots in the back so it can rotate back after one of the pins is removed (leave locknuts off) to facilitate loading filament. This is technically a remix of the OEM Prusa buffer but I could not find a way to point to Prusa's own…
A drybox spool holder for printing with moisture sensitive filaments which can be used: -stand-alone -with a filament buffer -with the linear track rewind mechanism -with the universal or integrated spring hub rewind mechanisms The drybox…
This simple stand is designed specifically for the Puffco Proxy vaporizer. It securely holds the Proxy while keeping it steady and upright, when not in use and on display. The stand is compatible with the stock Puffco Proxy glass,…
Constantine St. Benedict Zippo Stash Box.
Create several inserts for screwdriver or other stuff without the need to fix it on the honeycomb with a screw. Screwdriver Hook 20mm (0.787in) Hook 40mm (1.575in) print with Orange Prusament.
M25x1.5 threaded blind stuffing to close unused M25-openings. Unused PG21-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details below). [1] Thread…
Here you can find 4 different silhouettes of handball players as muffin toppers. The figures are approx. 9 cm tall, without the lower skewer. Please only use the muffin toppers for cooled muffins. Otherwise the plastic could bend :-) Have…
M16x1.5 threaded blind stuffing to close unused M16-openings in housings. Unused PG9-openings or PG11-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases…
Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.
Hallo, diese Pufferhalterung ist ein Remix aus 3 Modellen um es mit der Prusa-Spulenhalterung zu verbinden. Die Sachen lassen sich wunderbar mit einer 0,6 Düse und 0,3mm Layerhöhe drucken. Wohl nur das Rad würde ich mit 0,2 mm Layerhöhe…
Easy to make a cute Pufferfish keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
Fun set of 4 Buffalo Bills coasters with holder. Print them all, or just a couple. Model files included for those of you who do not have the same set up as me, or if you want to print more than 1 coaster at a time. 110mm (~4.25")…
Cette figurine représente Monkey D. Luffy, le célèbre capitaine des Chapeaux de Paille, dans une pose dynamique. Idéal pour les collectionneurs, fans de One Piece ou comme objet déco pour un bureau ou une étagère geek. Modélisée avec soin…
Ich ärgere mich immer darüber, wenn ich das Flusensieb bei meiner Waschmaschine säubern müsste, keine richtigen Auffangbehälter zur Hand zur haben. Entweder sind sie zu hoch, oder zu klein oder Rund. Oft habe ich dabei eine mittlere…
PG11 threaded blind stuffing to close unused PG11-openings in housings. [1] Thread type: PG thread [2] Diameters for PG11 opening: a) threaded hole: 17.3mm / PG thread b) drill hole without thread: 18.6mm [3] Sealing: An optional…
This is a hanging mount for the Original MMU2(s) Filament Buffer. [PC4-M10 Version] Features: Quick & Easy to load Reuses most of the original parts Keeps the Buffer out of the way Clean simple filament path to the MMU2(s) (Prevents MMU…
UPDATE: 8. August 2026 made Automatic Cassettes available for the buffer UPDATE: 26. November 2024 Adapted the top-buffer-mount for R4 Cassettes (from bluex ) wich has 0.8mm more lenght space and guides to hold it better in place. Now it…
PG9 threaded blind stuffing to close unused PG9-openings in housings. (normal usage) [Extension for PGxx to PG9 adapters] For the use with PG-adapters (PGxx to PG9) with very little space between the PG9 cable gland openings, I added a…
M12x1.5 threaded blind stuffing to close unused M12-openings or PG7-openings in housings. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for M12x1.5 opening: a) threaded hole: 10.5mm / M12x1.5 thread b) drill…
I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…
This mold is used to make a suitable seal for Lukas Cenovsky's card shuffler from basic materials that are easily available or available in the household. I used hot glue for this, but you can also use silicone, acrylic or similar…
Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: This new…
Printing and using this bottle opener will significantly increase the chances of the Buffalo Bills winning the Super Bowl. Printed in PLA with two colors. Insert a penny to allow this tool to open bottles. It is press-fit Enjoy! Go Bills!!
After slacking/slaving away all week long in my T-shirt and jeans, I like to dress up in my stiff collar shirt with cuff links. Don’t we all?! So you’re going to want to use this ready-made cuff link base design for all your wonderful…
Color coding the filament path is simple and with just a glance you can see which filament is being extruded. This saves time and helps prevent printing mistakes. History One of the issues I have always seen is filament pushing through…
I made a quick release and replacement for the rods for the model from Manzn. The quick lock can be attached with the holes that are present in the model without having to make any changes. For the assembly you only need 4x M3x8 hexagon…
This stand allows you to store your Meepo Shuffle V4 (and possible other longboards) in a vertical position without the need to drill into your wall to install a mount, or even lean it against the wall which could scuff or dirty it. There…
Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…
MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…
Multimaterial - MMU 3 Multicolor Print-MK3.5S with multi colored segmenter-r3 This is a Remix / Revisitation of the original .gcodes of MMU3 Multi Material Unit. These .gcode are specific for printing by MK3.5S, and are provided by…
The Air Handler System - Muffler - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become…
Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…
Shorter BSF 3/4'' 12 tpi adapter for Dremel 575 right angle attachment on Dremel compatible stuff. This tool could not be mounted on my compatible because the attachment was too long … So I created this model, just a bit shorter, better…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Buffalo skull for you on the hood of your RC Car. The skull is very nicely done and you have 2 versions from me - 1:10 and 1:12. It can be attached to the hood using…
M50x1.5 threaded blind stuffing to close unused M50-openings. Unused PG42-openings in housings are also possible to close with this blind-stuffing set. [1] Thread type: Metric tread [2] Diameters for suitable openings: Diameters for…
Simple G-Scale buffer stop, designed for being easy to print (lying on the flat side), easy to mount (push through rail from below between sleepers) and to work well. Not intented to be a scale model of a real buffer stop.
Print at 0.20mm Color change settings. Start with black to 2.6 Yellow till 3.2 Tan till 3.8 White till 4.4 Finish with Blue. Use 2 10x2mm magnets. No glue needed just press fit. Try it with ironing turned on. Check out my other 8-Bit…
I really like the buffer spacer hook design by Ondřej Stříteský that adds an angle to the MMU2S buffer to decrease the curvature of the PTFE cables, but the buffer became a bit wobbly with less support, so I modified the parts to have the…
Check out this cool Scout woggle featuring Mysa, the Jungle's buffalo. It's the perfect choice for giving to a Cub Scout named after a character from Rudyard Kipling's 'The Jungle Book.' According to Kipling's tales, the buffalo, always…
3D MODEL DESCRIPTION Onepiece luffy clock printed in color, the color change of the printer can also be used, it does not require AMS or MMU, in the slicer program set the color change to the recommended height. add a negative…
Schnupftabak case / Gletscher Prise / snuff tabacco case Die Toleranz beträgt 0,2 mm, sodass die Schnupfdose nicht rausfallen und gleichzeitig gut herausnehmbar ist. Ich habe es für einen Gürtelclip gedruckt:…
The photo shows it printed using Prusament Galaxy Black PLA and a generic white PLA also bought from the Prusa shop. I set a manual colour change using PrusaSlicer. It would look even better if I had some orange filament for the third…
Puk pro plyšáky Boba a Bobka :-) . Puck for Bob and Bobek's stuffed animals :-)
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
A magnetized storage bin for random airbrush stuff. This bin has a total height of 21.2 mm and the inner height is 20 mm. You need 8x 6 x 2 mm magnets. This is part of my magnetically stacking “Airbrush Storage” system. Check out more…
a wheel for buffer modified for 6000 bearing
Gewoon om een theelichtje in te zetten. Just to put a tea light in. Juste pour y mettre une bougie chauffe-plat. Sólo para poner una vela de té.
Imprimé avec les paramètres suivant : Hauteur de couche : 0.15 Première couleur : noir Deuxième couleur : gris, changement à la couche 8 Troisième couleur : blanc, changement à la couche 12 Fichier d'impression fourni pour le MMU, mais…
Check out this cool Scout patch badge featuring Mysa, the Jungle's buffalo, all ready to be stitched on. It's the perfect choice for giving to a Cub Scout named after a character from Rudyard Kipling's 'The Jungle Book.' According to…
Puffer Jacket Catchall Bowl is a playful yet functional storage bowl inspired by the soft, quilted structure of a winter puffer jacket. The inflated, stitched look contrasts with its solid form, turning an everyday organizer into a bold…
Hier eine Möglichkeit den MMU3 Buffer aufzuhängen. Ich habe die Strebe an den Segmenter geklebt. Die kleinen haken in entsprechendem Abstand an die Wand geschraubt und schon kann man den Buffer einhängen. Da es sich in meiner…
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
For a friend's wedding, I created original cufflinks that no one else will have that day. Some of the wedding guests were chosen to wear a secret MCU reference and I just couldn't find my old cufflinks at home. Hence this choice. For…
The M3 Square nuts (2 each) are sized for the more commonly available size (2.3mm thick) - the Prusa nuts are slightly thinner (1.7 mm) and will slide out of the slots. When used just to hold the buffer plates together, 2 M3x25 or M3x30…
This is the Cable Cuff Wire Rack Hook. It is a super simple, cheap, and fast way to deal with cables laying around the shop that just need a place to go. Supports are needed, however I have included the recommended print settings below.
Der Puffer wird in 2 Teilen gedruckt. Es ist zu empfehlen die “Front” mit einer möglichst hohen Auflösung (geringe Layerhöhe) zu drucken, damit alle Details erhalten bleiben. Für den “Stiel” sind leichte Supports nötig, ansonsten…
Watering hole stuffing for Savic Rody Cavia cage (70 x 45 x 31 cm), it is originally for guinea pigs, but also can be commonly used for hamsters. We have faced the problem with biting the plastic around the watering holes so I designed…
Hello, Today I have for you a Jester, a clown, a clown. The character is suitable for coloring, or just for playing. The material I used is PLA/PETG Basic No need to use supports If you are interested in my work, the links are here:…
Lisca di pesce per avvolgere vari cavi. Stampato in PLA in 45 minuti riempimento al 10%
A replacement card tray fitting a common manual, plastic card shuffler. After losing our original card tray (how does that happen?), and continuing to use the shuffler, spewing cards everywhere or jamming, I decided to go ahead and make a…
I recently purchased a bike trailer (also known as fietskar/ Lastenanhänger). Its frame is made of 20 mm diameter metal pipes. (EAN: 4251774961240) I designed this “clamp and insert” buffer attachment to protect the frame paint when I set…
A replacement spacer for a toilet seat lid This is specifically for a Cosmos Clivia by abusanitair . Though its parametric, so you can adapt it to yours, if it has the same form.
clips to hold closed a broken hotpoint (and others perhaps) tumbler dryer's fluff filter
License: Free for personal use only! For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Note : I have updated the model with stronger joints. If the Cat head feels stiff…
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
Update 18. 4. 2023: added 68x44mm card version (print big wheel 2x - there is not middle one). I don't have small cards and confirmation it works fine - please see discussion)…
Preening (Puffing) Raven Added version with thicker legs. (11.3.2024)
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails ( Instant access to 44+ models) I like fluffy pets, so I thought why not make one and share with others! This fox is…
These chubby, puffy hearts are designed to look like they’re knitted , but they’re fully 3D printable . They come out with a soft, “stitched” texture that looks great in Valentine colors (red/pink/pastel), gift sets, desk decor, or just…
Bring a bit of winter “street style” to your desk with this white puffer-jacket (Montclair-style) pen holder . The padded sleeves, front seam details, and chunky “pockets” make it a fun, modern desk accessory that still looks clean and…
Bring warmth and personality to your desk with this adorable Puffer Jacket Pencil Holder ! Inspired by cozy winter fashion, this fun and stylish organizer is perfect for storing your pens, pencils, brushes, or small tools while adding a…
This model is obsolete by my Playing Card Shuffler v3 https://www.printables.com/cs/model/427943-playing-card-shuffler-v3 ============================================================= Terraforming Mars board game has a lot of cards to…
License: Free for Personal use only For commercial license & exclusive models visit: https://www.patreon.com/FluffyTails (Instant access to 44+ models) Hey everyone! 💛 I’m super excited to share a cute Flexi Puppy ! This little guy is…
These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…
These pegboard hooks and mounts are designed for standard American pegboard with 1 inch (25.4mm) spaced holes that have a hole diameter of 3/16 inches (4.8mm). If you like what I am doing, just send a friendly comment. Knowing people find…
![Buffer Attachment for HOMCOM Bicycle Trailer [PETG]](https://media.printables.com/media/prints/6b013c40-c9d5-4221-a962-c6f39cd2e9dc/images/10089413_0d01c77d-2e37-46f0-8ab9-83787acab368_23788632-3cfa-478d-ac2e-c672d130fc6a/pxl_20250624_181633543.jpg)
