Search results: usa

Sort order

19,567 models

P
PrintablesPrusa Research

Prusa Face Shield

A prototype face shield that we developed. In three days, we went through dozens of prototypes and two verifications with the Czech Ministry of Health. On May 14 2020, this RC3 version received the CE certification and it complies with…

Downloads
218,547
Likes
760
Rating
4.82
P
PrintablesNeedItMakeIt

Rod Sloth - Fits Most 3D Printers - PRUSA - BAMBU - CREALITY

This is a tool that does an excellent job at cleaning your rod. It clamps snugly on the 8mm 3D printer or CNC leadscrew, you can remove your hands and let the printer do the rest of the work. This is meant to be used on any printer with a…

Downloads
40,929
Likes
8,958
Rating
4.92
P
PrintablesiFreyz

Prusa Steel Sheet Holder

Prusa Steel Sheet Holder for 2, 3 or 4 steel sheets. Print instructions Print in PETG or PLA with 0.3 layer hight and 5% cubic infill. Added a new, wider steel sheet holder for 2 sheets.

Downloads
19,380
Likes
4,236
Rating
4.91
P
Printablesschuetzi99

Anti-vibration feet for Prusa MK3/S/S+, MK4 and Prusa Mini/+

My MK3 printer stands on an Ikea Lack table, which is an excellent amplifier for the vibrations of the printer. So I designed these feet, and they do a good job without making the printer too wobbly. A low profile version and a small…

Downloads
17,858
Likes
3,595
Rating
4.9
P
Printablesfalk

Stringing Test Prusa 3S

The Eiffel Tower showed up with some stringing. This Test Model is intended to vary parameters Print instructions PLA Prusament 0,15 Standard Quality Mode

Downloads
12,649
Likes
962
Rating
4.92
P
PrintablesIn3DSpace

LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…

Downloads
8,694
Likes
2,694
Rating
4.95
P
PrintablesPrusa Research

Spool holder for Original Prusa MK3S+

Printable spool holder for Original Prusa MK3S+/MK3 Warning: This spool holder is not compatible with Original Prusa MK4. There is a risk of collision between the extruder and filament holder.

Downloads
7,255
Likes
390
Rating
4.91
P
PrintablesMichael

Prusament upcycle Frisbee

Ready for summer! Easy-to-print Frisbee Disc. The Frisbee flies very stably and well through the air. The holes in the Prusament disc make it ideal for short-distance use. The compact build makes it very travel-friendly. The size and good…

Downloads
5,443
Likes
2,480
Rating
4.7
P
Printablesdroidik

Prusa Mini retraction tower (PLA, PETG)

1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Downloads
3,922
Likes
128
Rating
5
P
PrintablesJoe

MF DOOM mask remix for Prusa MINI

This is a remix of https://www.thingiverse.com/thing:526854 by https://www.thingiverse.com/mitchellharvey

Downloads
3,852
Likes
468
Rating
5
P
PrintablesJerrari

GEN2 Steel Sheet Holder V2 For Prusa and Bambu Lab

JERRARI3D.com Modular solutions for storing steel sheets for the PRUSA i3 (MK2.5 and MK3) and Bambu Labs (X1 and P1P) Unlike my original steel sheet holder the GEN2 Steel Sheet Holder V2 does not require a backer mounted on the underside…

Downloads
3,647
Likes
1,619
Rating
4.93
P
PrintablesIn3DSpace

LED Light Bar Prusa MK4

Light bar for the Prusa MK4 available in single and dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Downloads
3,475
Likes
1,317
Rating
4.89
P
PrintablesPrusa Guy

Prusa CORE One MMU3 Community version

Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…

Downloads
3,232
Likes
1,526
Rating
4.27
P
PrintablesBeaver

(OBSOLETE) Reusable Filament Spool - Inland compatible

Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…

Downloads
3,158
Likes
199
Rating
4.4
P
PrintablesIn3DSpace

Single LED Light Bar Prusa i3 MK2/MK3

Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…

Downloads
2,674
Likes
531
Rating
4.95
P
PrintablesSkanderberg777

Temp Tower PLA Prusa Mini Starting high to low temp

Thank you steveleader for making this and available to us. I just swapped the temperature sequence, because starting with 190°C got my print get knocked off. Important: when importing the 3.mf file, copy the Before layer change G-code and…

Downloads
2,627
Likes
112
Rating
4.83
P
Printables3D-Print Brehm

IKEA 365+ Box 10,6 Liter - Filament Dry Box mit 2x Silica Zylinder (für PRUSAMENT 2 Rollen) mit digital Hygrometer

Hallo zusammen, hier mal wieder einige Optimierungen für meine 3D-Druckwerkstatt, die ich euch gerne zum Nachdruck übergeben möchte. Um die Druckqualität zu erhöhen, habe ich mir dann doch mal einen Drybox gebaut und verschiedene Entwürfe…

Downloads
2,360
Likes
399
Rating
4.33
P
Printablesthe freewheeler

Prusa MINI Z-Top | Electronics Box Lid

Prusa MINI/MINI+ ‘Z-TOP’ The Z-Top is an alternative lid design for the electronics box enclosure, which attaches seamlessly to your Prusa MINI or MINI+. The Z-Top connects at the base of the z-axis and replaces the lid of the stock…

Downloads
2,200
Likes
548
Rating
4.92
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Downloads
2,107
Likes
685
Rating
4.81
P
PrintablesIn3DSpace

LED Light Bar Prusa MINI

Light bar for the Prusa MINI. Mounts are designed to fit 11x24mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look. Mount also includes an opening to insert a…

Downloads
2,046
Likes
927
Rating
4.93
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Precision Fit Multicolor Mesh Side Boxes (for MK3/S/+, MK3.5/S, MK3.9/S & MK4/S - MMU Not Required)

Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…

Downloads
1,941
Likes
781
Rating
4.97
P
PrintablesOWL ART

Borders for Honeycomb Storage Wall (Smallest Size, Prusa MINI)

Borders compatible with the Honeycomb storage wall base part of the smallest size. Only four models needed to complete! I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Can be printed with 15% gyroid infill. Material: PLA…

Downloads
1,902
Likes
595
Rating
5
P
PrintablesTritschi

Tool Box for Prusa Tools (for adding upcoming Core One, XL or MK4S)

EDIT 21-Apr-2023: Added an Voron-Edition: https://www.printables.com/de/model/458704-tool-box-toolbox-for-voron-3d-printers-several-ver EDIT 20-Apr-2023: Added an Ender-Edition:…

Downloads
1,889
Likes
786
Rating
5
P
PrintablesToms

Prusa Mini Fan Cover

If you find value in the model provided do consider supporting me with a small donation: paypal.me/Tomax77 Hope you like it ;)

Downloads
1,854
Likes
386
Rating
4.86
P
PrintablesYosuke

Squash ball feet for Prusa i3 mk3s

I found that there is well known idea to use squash ball for 3d printer feet for anti vibration. I made this model for my Prusa i3 mk3 by myself, so this is not really a remix but pretty much inspired by existing nice designs such as…

Downloads
1,801
Likes
390
Rating
4.96
P
Printablesmedyk3D

Prusa Heatbed Cable Cover

This my take on Prusa i3 MK3S Heatbed Cable Cover. I remixed the angled version so my printer fits better to the Ikea Lack table enclosure. Print instructions Unassociated tags: heatbed cable cover, prusa heatbed cover Category: 3D…

Downloads
1,745
Likes
132
Rating
4.85
P
PrintablesIn3DSpace

MMU2 LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Downloads
1,734
Likes
351
Rating
4.92
P
PrintablesTronnic

Raspberry Pi 3 Case for Pi & Buck Converter - Direct Prusa i3 MK3 attachment

I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…

Downloads
1,733
Likes
173
Rating
4.96
P
PrintablesSurfalex2000

Prusa XL series: Antiresonance integrated steel sheet holder (curved) (Update: Added 3 sheet version)

I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…

Downloads
1,705
Likes
387
Rating
4.94
P
PrintablesBig Dutch

Prusa MK4 LED Status Bar Extension

My printers sit on an ikea Kallax shelf which causes the LCD panel to hang over. Since the new MK4 has an awesome LED Status Bar, I did not want to lose out on the feature. Model printed without supports and misses LED and any chips on…

Downloads
1,696
Likes
531
Rating
4.95
P
PrintablesSeabird HH

Prusa Mini Raspberry Pi Camera Mount - by Clip-Fastening

The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…

Downloads
1,654
Likes
281
Rating
4.84
P
Printablesflux_capacitor

FLSUN V400 golden PEI buildplate texture for PrusaSlicer

This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…

Downloads
1,576
Likes
47
Rating
5
P
PrintablesMK-Design

Snap-on squash ball foot for Prusa I3

Silencing foot I designed for my Mk3S+ using the softest squash balls (double yellow dots) I was looking for something better than the original rubber pads supplied together with the printer and found the idea using soft squash balls…

Downloads
1,494
Likes
387
Rating
4.93
P
PrintablesReven

Pen plotter attachment for Prusa MK3s

This is a simple mod for your MK3 to use it as a penplotter. The main design objective was for it not to interfere with printing and to not have to assemble or disassemble any parts to change from one to the other. I tested multiple…

Downloads
1,468
Likes
289
Rating
4.91
P
PrintablesBuildX

#0073 xRivets for Original Prusa Enclosure OPE (Extra Rivets / Plugs)

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…

Downloads
1,462
Likes
441
Rating
4.95
P
Printablesdancan13f

Prusa Core One/+/Gen2 OneL/+ Squash Ball Feet

I recommend using balls with blue dot; they are the hardest. ACCESSORIES Prusa CoreOne/+/Gen2 You will need 4 M3x6MM screws to fix them to the lower frame; this one has 4 threaded holes in each of the 4 corners as standard. Prusa…

Downloads
1,458
Likes
515
Rating
4.93
P
PrintablesSquareMesh

Prusa i3 MK2 / MK3 - Filament Guide

Simple filament guide for MK2/S + MK3/S printers. Main design considerations V2 (Green) provide enough gap for filament movement as Z rises higher arm in respect of spool to aid filament path / extruder reduced thickness of arm V1 (Blue)…

Downloads
1,404
Likes
71
Rating
4.83
P
PrintablesJeroenVermeulen

Prusament Filament Indicator PLA PETG meters grams

A filament indicator for Prusament classic spools (non NFC) . Update 2026-01-27: Added v2 with small corrections on weights, added TPU To be placed over the 4 consecutive fully open hexagons (see picture). It snaps in the hexagons around…

Downloads
1,403
Likes
655
Rating
4.94
P
PrintablesMike81622

Prusa MK4S, XL (09/2024 onward), CORE One and CORE One L xLCD Knob Beauty Ring

Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail

Downloads
1,380
Likes
383
Rating
4.9
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Downloads
1,376
Likes
415
Rating
4.99
P
Printablesecoiras

Predator Action Pliers Mk2 -- PRUSA colors

PRUSA color scheme print of the Predator Action Pliers Mk2. Print instructions Prints in place with no supports.

Downloads
1,340
Likes
175
Rating
4.75
P
PrintablesINeedOneDesigns

Prusa MK3 Spool Holder Side Mount Adaptor

I didn't like the weight of the spool on top of my printer any more So I designed an adaptor to use the original spool holder that came with my MK3, which adapts it to mount on the side of the printer. An easy print part, I printed mine…

Downloads
1,338
Likes
175
Rating
4.97
P
PrintablesJKM

PrusaCoreOne adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Downloads
1,292
Likes
25
Rating
0
P
PrintablesS3BR4

Prusa CORE One Nozzle Wiper

This is a Nozzle Wiper for the CORE One that uses a A1 style silicone brush. You will need a knock off Bambu Lab A1 wiper brush. I got mine from Ali Express. 6 for €1.20. Just make sure they come with adhesive tape at the bottom. You will…

Downloads
1,284
Likes
552
Rating
4.93
P
PrintablesUko

Yet Another 90 Deg Prusa MK3 Heatbed Cable Cover

I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.

Downloads
1,270
Likes
96
Rating
4.77
P
Printablessraj

USB Prusa Mini

USB holder for Prusa Mini Print instructions USB holder for Prusa Mini ..my remix from https://www.prusaprinters.org/cs/prints/15544 needed M4, T-nut, USB 3 cable angle Bend Up, 25-30cm, ex.…

Downloads
1,267
Likes
373
Rating
4.79
P
Printablesrohde•labs

Yet Another Prusa Mini / MK2 / MK3 Knob

Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…

Downloads
1,190
Likes
141
Rating
4.9
P
Printables3Dprintfun

Prusa Build Plate Holder

I have been doing some organisation of my work space, such as Gridfinity , and I had an extra Prusa build plate lying around (literally). So I designed this Prusa build plate holder, so that it would not be in the way and getting…

Downloads
1,179
Likes
384
Rating
5
P
PrintablesVOJTAšák

Dummy 13 500% Prusaslicer

Dummy 13 500% prusaslicer compatible, pre plated, ready to print version of files by Vasichkin

Downloads
1,170
Likes
191
Rating
5
P
PrintablesJorge

Storage Tree - Leaf for PRUSA Tools - MMU3 Compatible

Introduction This module is part of the Storage Tree project . there’s no need for an MMU on this project. Only one material change. But there is a MMU3 prepared files if you have it In case you've come across this model and are unsure of…

Downloads
1,124
Likes
1,024
Rating
5
P
PrintablesMichele Bordoni

Prusa stronger MMU2S Idler

During the assembly of MMU2S I cracked the part. I suddenly discovered that many people are having my problem so I updated the Prusa part to get it stronger. This design is based on R1 prusa part. Print instructions I have printed it with…

Downloads
1,088
Likes
68
Rating
4.94
P
PrintablesBP3D

Reusable Dental Floss Pick Kit Card (Extra Strength) (1pc & 6pc)

Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.

Downloads
1,082
Likes
468
Rating
4.75
P
PrintablesJKM

PrusaXL adapter for digital spool rack

The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…

Downloads
1,034
Likes
13
Rating
0
P
PrintablesNorthStrider

Slide-in Wyze Cam Prusa Mount

1/5/2020 - Added 8mm channel version. Added a version to clip onto the BEAR upgrade extrusion. 9/11/2020 - Added Right Hand version per comment request. (Works for MK3S and the Mini.) I decide to do my own spin on Gabe's awesome cam…

Downloads
995
Likes
174
Rating
4.9
P
PrintablesKeither

Modular and re-usable plywood furniture connectors

Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…

Downloads
990
Likes
553
Rating
5
P
PrintablesIn3DSpace

Bear Upgrade LED Light Bar Prusa i3 MK2/MK3

NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…

Downloads
986
Likes
197
Rating
4.85
P
Printableshellgy

Milk/juice box with a usable cap

No supports needed, print it in 0.20mm in PLA, available in 3 sizes tiny medium big You can scale it to make it bigger (photo shows medium and big) A regular version is available for the box/carton, but you can also print the version with…

Downloads
982
Likes
403
Rating
5
P
PrintablesPrusa Research

Double-sided Prusa Keychain

Double-sided Prusa keychain to be printed with automatic color change at a given layer height or just in a single color. It's a fun and easy print that can be used to showcase the capabilities of the Multi-Material MMU3 or simply to show…

Downloads
951
Likes
110
Rating
4.94

Prusa MK3.5/MK3.9/MK4 centre tray/cable tidy (now works with Y belt tensioners and Prusa enclosure)

To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…

Downloads
941
Likes
310
Rating
4.81
P
Printablesclift_d

Prusa Mini+ heatbed connector cover - 48deg longer

This is a remix of Jakeleeee's Prusa Mini 48deg heatbed connector cover, which stretches it to be about 3mm longer, to provide the additional clearance that I found was required on my Prusa Mini+ to allow the cables to exit without being…

Downloads
923
Likes
229
Rating
4.86
P
PrintablesDom Cis

CONTAINERS - PRUSAMENT SPOOL - reuse idea

Follow the official blog post: https://www.prusaprinters.org/?p=8875&preview=true You can easily turn the paper centers into a handy container for accessories, pens, jewelry or even a money box! 3D printing is easy and quick, as well as…

Downloads
904
Likes
203
Rating
4.63
P
Printablesebeeche

Prusa MK4 camera mount for Logitech C270/C310

Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…

Downloads
891
Likes
203
Rating
4.76
P

Prusa Mini power and ethernet cable stress relief v2

update: This model has updated to v2 having now stress relief for power and ethernet cable. --- Stress relief for Prusa Mini power and ethernet cable. I felt like the power plug moved too much and possibly caused stress for the power…

Downloads
864
Likes
257
Rating
4.97
P
Printablestrudslev

Prusacaster - Correctly placed hardware

On the original Prusacaster, the hardware is placed 1.4mm too far to the left, but two more options exist for the Harley Benton hardware. mrstolarsky made a great new core with the screw holes for the alternative hardware, plus the…

Downloads
861
Likes
178
Rating
4.75
P
PrintablesNikosSprocket

PrusaSlicer infill pattern samples

Print all 16 PrucaSlicer Infills available each one in a little box with raised letters of the infill name. It can be printed 100% on a bed with minimum dimensions of 210 mm x 203 mm (X,Y). I printed it on a PRUSA MK3S+. Slicer:…

Downloads
857
Likes
120
Rating
4.78
P
PrintablesMartin Darebný

Prusa MMU2 Selector with magnet and opened FINDA canal ver. E2 - stock magnet 2×6×10 mm

Improved MMU2 selector with rectangular slot for magnet found in Prusa MK3S/MMU2S kit parts. This is a modification of the E2 version of MMU2 selector mod by emanuvele, inspired by same modification of the previsous V9 version done by…

Downloads
851
Likes
78
Rating
4.82
P
Printables4nthonylin

Prusa Mini Low Profile Z Axis Squash Ball Mount

Remix to add a feet to add additional support to the Z-Axis mount. The original feet for the back right for the control box is still recommended as well due to the weight distribution. Print instructions Printed in PETG @ 0.2mm layer…

Downloads
816
Likes
166
Rating
5
P
PrintablesNick14

Prusa mini Handle with speed holes.

My take on a handle for the Prusa mini. Printed from PET or PLA works also. 0.2mm layer heights 4 shells 8 top and bottom layers 30% infill No support needed Requires 2x m6x12mm cap screws and 2x 3030 extrusion T nuts for install. Links…

Downloads
805
Likes
137
Rating
4.97
P
PrintablesShaun

Lazy Susan carousel bearing (multiple sizes)

You'll need some 6mm BB gun ammo. (The ones I used had a real diameter of 5.9mm, measured with calipers.) If you want to check that your BBs will work with this print, you can print the top and bottom sections from the “Test prints”…

Downloads
794
Likes
236
Rating
4.75
P
PrintablesHalloSpaceBoy

Easy Prusa MK4 Input Shaping Calibration

Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…

Downloads
780
Likes
92
Rating
5
P
PrintablesAlego

LCD Prusa MK4 MMU

XLCD display from Mk4 in color (MMU)

Downloads
767
Likes
143
Rating
4.88
P
PrintablesLiouma

Squash ball feet: the most efficient system for Prusa i3 MK3/MK3S/MK3S+ or any 30 extrusion based printer, 100% printable

If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…

Downloads
760
Likes
167
Rating
4.8
P
PrintablesFiz105

PRUSA XL Temperature Tower .4mm nozzle PLA,PETG

Just download the G code and print!

Downloads
757
Likes
37
Rating
3.5
P
PrintablesFAYRON

Original Prusa Enclosure 2Kg Spool Holder

A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…

Downloads
752
Likes
43
Rating
4.25
P
PrintablesBobBlazevic

Prusa i3 Noise Suppression Feet

Easy to print feet to help stop the printer transferring resonance vibration to the work table. If your new printer turned your table into a drum, you want these. Cheaper, easier, lighter, and better looking than a slab of cement. No need…

Downloads
751
Likes
169
Rating
4.88
P
PrintablesMiniWorld3D

Hozomon 宝蔵門 - Asakusa, Tokyo, Japan

🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon. ⚠ - - Please read the Print Instructions further below - - ⚠ 宝蔵門…

Downloads
741
Likes
190
Rating
0
P
Printablesnilok

Prusa MK3S Heatbed Cable Support - Modified Original

This is a slightly modified version of the MK3s heatbed bottom cover. I added a rear support for the cables with a channel for a zip-tie. This does add an additional 9mm to the length of the part, so tight enclosure/wall spaces should be…

Downloads
728
Likes
94
Rating
5
P
Printableswedgeworks

PETG Temperature Tower for Prusa MK4, .4mm nozzle and Input Shaping

Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…

Downloads
725
Likes
39
Rating
5
P
Printablespear3d.ch

Prusa Mini -> MK3s (SmokiStyle) Upgrade Bear

Hi PP i am posting here my project, i am willing to modify one of my prusa mini to direct drive extruder and more sturdy frame like Bear. If you want the Haribo version check it here:…

Downloads
686
Likes
144
Rating
5
P
Printablesfoorschtbar

Prusa MK4/XL Better LED Status Bar

My MK4 is on a sideboard and stands over the edge. As a result, you can not see the great new LED status bar of the MK4. This model solves the problem my MK4 and also fits in any Prusa XL/MK3.5/MK3.9. It is a small light pipe and fits…

Downloads
684
Likes
204
Rating
4.97
P
PrintablesTiffi226

Prusa MK3/MK4 build plate holder - steel plate holder // 3 slots

Remix of the model from grooveup - I just needed 3 slots to hold my build plates.

Downloads
674
Likes
51
Rating
4.93
P
PrintablesBlue

Prusa Core One Magnetic Corner Plugs

Use this print to plug the corners up Needs 6x2mm magnets. I used 3 per print since I was short and that seemed okay It's certainly not perfect as there's a minor gap still but this is just a really quick cut to match the webcam mount

Downloads
668
Likes
256
Rating
4.86
P
PrintablesAsa

PTFE Passthrough for Original Prusa Enclosure MMU2 MMU3

Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…

Downloads
668
Likes
164
Rating
4.42
P
PrintablesTimothy_Ecc

Graded Temperature tower for PLA, PLA PLUS, and PETG on the Prusa XL with input shaper

This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076

Downloads
667
Likes
25
Rating
0
P
Printablesfloxery

Prusa mini+ Heatbed Cable Support (Easy Clip On) - REMIX

V1 is a rought adaption to fit the mini+ at all. V2 is a theoretical better fitting version as 3D-File. I haven't printed it yet but its verified through the comments. Probably works for mini as well. I just own the mini+ to test it. Use…

Downloads
659
Likes
121
Rating
4.84
P
PrintablesMichaelQ

Original Prusa Enclosure - Slider Lock Latch

When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…

Downloads
656
Likes
228
Rating
4.98
P
Printablesfiretech

Low Profile Squash Ball Feet for Prusa MK4/S, MK3.9/S, MK3.5/S & i3 MK3/S/+

I liked the look of @Yosuke's Squash Ball Feet , but the added height compared to the stock feet (~10mm) made the MMU3-to-extruder tube rub against the ceiling of my enclosure just a bit too much, so I loaded in the model in Fusion 360…

Downloads
648
Likes
204
Rating
4.92
P
PrintablesRolf-089

Prusa i3 Mk3 90° Air Inlet

UPDATE Added new .stl File. Based on my 45° air inlet i changed the geometry: The air intake is now extended and shows about 45° upwards. With this design (many thanks to user chewey for the idea! ) there should be less hot air form the…

Downloads
642
Likes
88
Rating
4.84
P
PrintablesXtr3m3

Prusa Core One 6 build plate holder with handle

Quick remix of Pejek's build palte holder for the core one. I changed all slots to 1.5mm to handle the OEM Prusa Build plates and added a small handle to pull the holder off. Uses 10x2mm magnets. I have uploaded the F3D file. DO NOT USE…

Downloads
620
Likes
85
Rating
4.87
P
PrintablesZelrick

Z42 Prusa Mini/ Mini Plus Narrow Side Spool Holder

For my application the stock spool holder for the mini didn't work out well. So here we have a side spool holder that I designed to reduce the Mini's overall footprint and make changing filament easy and convenient. It mounts to the Y…

Downloads
619
Likes
153
Rating
4.75
P
PrintablesGrzegorz Z.

BallBearing spool holder for (Un)orginal Prusa Drybox

I didn't like the friction of the steel bars, it was kinda hard to spin the spool even by hand.. So here is my mod: ball bearing spool holde r for (un)Orginal Prusa Drybox. The mount holes are for original , 18mm, bars. There is a version…

Downloads
615
Likes
110
Rating
4.87
P
PrintablesNLarson

Prusa Mk4/MMU3 & Mk3S/ MMU2S Tower Print Buffer

August 20, 2024: Re-uploaded the unique MK4 parts as the original upload appear to be corrupt. This Tower Print Buffer has been updated to work with the MK4 and MMU3 system (It still works with the Mk3 and MMU2 as well). The frame mounted…

Downloads
612
Likes
230
Rating
4.57
P
Printables4nthonylin

Prusa Mini Low Profile Heatbed Cover

I had some clearance issue with my fan duct: https://www.prusaprinters.org/prints/37368-prusa-mini-mosquito-fan-shroud so I decided to make a low profile version of the heatbed cover. I lowered the height from 4.8mm to 3.8mm to be in line…

Downloads
601
Likes
92
Rating
4.8
P
PrintablesTomson Design

Prusa Toolbox

Another Remix from zx82net Great Rugged Box. I change the hinge and make it rigid to the top. It was easier to close when the top was bigger. You loose the watertight function but i use it indoors so i think that is ok. The size is the…

Downloads
595
Likes
167
Rating
4.92
P
PrintablesJorge

PRUSA Nextruder thumb Hexagonal Key with TORQUE LIMITER

Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…

Downloads
588
Likes
248
Rating
4.75
P
PrintablesUko

Original Prusa Enclosure Double Sheet Holder (M3 Bolt Holes)

Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures

Downloads
587
Likes
191
Rating
4.95
P
PrintablesExtrud3D

Light Prusa MK4/MK4S bin two hooks

I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…

Downloads
574
Likes
107
Rating
4.88
P
Printableserickson85

Prusa i3 MK3 MK4 Squash Ball Feet System

Highlights: Noise Reduction Improved Stability. Reduces VFA & Ringing/Ghosting. 6 Support Points without increasing operational footprint. BOM: Print 6x Foot & 6x M6 Slot Nuts 6x Squash Balls (double yellow dot) 5x M6 x 12mm Bolts 5x M6…

Downloads
573
Likes
138
Rating
4.91
P
PrintablesJohnGames

Prusa Mini Multi Nozzle Size and Material Linear Advance Calibration

The Prusa mini K Factor / Linear Advance is well calibrated for stock. If you have changed your extruder / hotend you might need to calibrate the Linear Advance. This fixes issues where it is blobbing like over extrusion on edges yet when…

Downloads
572
Likes
55
Rating
5
P
Printablesjagr200

Prusa Mini LED Light Bar

This is an LED Light Bar for the Prusa Mini. This light bar is powered by a 12v power supply. It mounts to the top of the Z axis using (2) 5Mx20 button head screws. The stock screws are 5Mx15. The power switch is located above the Z axis…

Downloads
571
Likes
177
Rating
4.88