Search results: welding

Sort order

276 models

P
PrintablesCrazy3D

Splicing tool 1,75mm + 2,85mm - filament welding - filament connecting --> You will never have last meters again!!!

Splicing tool 1,75mm +2,85mm - filament welding - filament connecting If you like it --> press like it :-) Use your last meters to create a tool, with which you will never have last meters again! Instead of last meters, you will have…

Downloads
882
Likes
233
Rating
4
P
PrintablesMakerneer

Welding Gas Tank Hook

I wanted more storage on the welding cart, contemplated buying a Hel-Hook but found a design on Thingi that fit the bill. Only problem was I'd have to remove my gas regulator to install it. So I remixed it to add a removable section of…

Downloads
229
Likes
54
Rating
5

Battery spot welding electrode holder

This is a holder/handle for the spotweld electrodes of a battery spotwelder. Specifically the ones found on Aliexpress. With this Thing you can hond both electrodes with one hand. You can make your own spotwelder using a microwave…

Downloads
140
Likes
42
Rating
0
P
PrintablesObsoleteNerd

Welding Lens adapter for GoPro Hero 12

This adapter allows you to mount a 51x109mm welding lens to a GoPro Hero 12. Tested on the Bossweld ones from Bunnings, but should also work on any similar sized welding lenses. It holds the GoPro lens nicely centred in the welding lens…

Downloads
71
Likes
10
Rating
0
P
PrintablesMitchell Takes

Miller Welding Helmet Adjustment Repair

Our Miller welding shield's side adjustments broke, so we printed a new part and installed it in under an hour. It is always a good idea to keep consumables around, even small simple pieces like this, so that you minimize downtime in the…

Downloads
23
Likes
8
Rating
0
P
PrintablesKofMan28

Mount for Welding Helmet Sacit Lion King

Original mounting parts of the welding helmet are made of plastic. Even the threaded section is plastic, which unfortunately wears out after a few years. To solve this, a guide hole was added so that an M6 x 25 or 30 mm screw can be…

Downloads
16
Likes
4
Rating
0
P
PrintablesPablo Simone

Magnetic welding helper

This little device is a helper to hold wires and electronic components while you solder them. The opening mechanism is magnetic so you don't need a spring and it is very gentle on fragile wires and components. You need 3, 3x8mm magnets…

Downloads
15
Likes
1
Rating
0
P
PrintablesReed Bowman

adjustment gear replacement for welding helmet

The welding helmets from Harbor Freight tools, branded Chicago Electric, are amazingly cheap, and work, so a lot of people get their start welding using them, and I expect there are hundreds of thousands of them in use. The size…

Downloads
15
Likes
7
Rating
0
P
PrintablesMy 3D Prints

4 in 1 Tool - Filament & PTFE Cutter + Filament welding

This is another 4-in-1 tool for 3D printing in the style of my model https://www.printables.com/model/191102-spatula-3in1. With this model you can cut 1.75mm filament at 45° and 90°. You can also cut the PTFE tube at 90°, and you can even…

Downloads
2,688
Likes
860
Rating
4.8
P
PrintablesUncle Jessy

Dremel Friction Welding Bits

Easy to print friction welding tips for your Dremel! No Supports needed and is a great project to use for your left over spools of filament you have laying around. 100% infill .28 layer height Print flat with a brim Attach to the tip of…

Downloads
2,652
Likes
863
Rating
4.78
P
PrintablesTJC_3dprinting

Welding helmet key chain

A small welding helmet with a loop for a split ring. Made for the engineers at work. Scales down nicely if you want it a bit smaller to fit in your pocket. No supports required. If you would like your own company initials or simple logo…

Downloads
1,416
Likes
183
Rating
4.9
P
PrintablesLucaV

Cable welding device

ITALIANO Questo modello è un supporto per saldatura di cavi, che consente una comoda presa dei fili per una saldatura perfetta, dimensioni: 75*50*32mm, apertura 0-15mm Dimensioni compatte e trasportabili, tempo di stampa 90min, consumo di…

Downloads
759
Likes
153
Rating
5
P

Goblin Gözlüğü / Goblin Goggles / Steampunk / Engineer / Welding

Goblin gözlüğü. Orjinal gözlüğümü 3D tarayıcı ile taradım. Kapaklar ve gözler arası kordonu sıfırdan tasarladım. İsmimi anmak istemeyen olursa diye “GOBLINWORKS” yazmayan bir çerçeve de ekledim. PETG, ABS ile yazdırmanızı öneririm ama PLA…

Downloads
640
Likes
157
Rating
5
P
PrintablesBoogie

18650 accupack soldering/welding assisstant

18650 accupack soldering/welding assisstant for accupacks up to 4x6

Downloads
637
Likes
81
Rating
5
P
Printablesblackjackbender

Wall Mounted Welding Clamp / Vise Grip Holder

Hanger for vise grips. This was design around hanging welding clamps from. The small clamps are held but there is a lot of slop due to it being designed around the larger clamps. Note the following: The orientation of the model may need…

Downloads
553
Likes
127
Rating
5
P
PrintablesJonas Leander

Welding mask hook

A simple but slightly sculpted hook to hold your welding mask. The hook fits my ESAB mask with a 32mm headband with room to spare. Use 4 or 4.5mm countersunk screws. Print settings: PLA (or whatever) 3 perimeters 15% infill Print on its…

Downloads
421
Likes
100
Rating
0
P
PrintablesGuido

3,7V 18650 Battery Clamp Mounting Holder for Pack Spot Welding. Other sizes on request. Also look at my other models and plce like them.

18650 Battery Clamp Mounting Holder for Pack Spot Welding. Also look at my other models and plce like them.

Downloads
412
Likes
39
Rating
4.67
P
PrintablesBooks

Welding Mask Model

Public domain model of a welding mask and torch by snot_nose . Originally uploaded to Blend Swap .

Downloads
402
Likes
18
Rating
5
P
PrintablesNémet István

Welding helmet wallhook

Simple hook for various size welding helmets

Downloads
389
Likes
94
Rating
5
P
PrintablesParagon

Handle for welding cells 18650 "6 cell"

To download my project, a cell welding holder, it allows you to weld up to 6 cells.. The handle is divided into two parts, the lower part is tighter thanks to which the links are evenly arranged, and the upper part is looser so that you…

Downloads
381
Likes
33
Rating
5
P
PrintablesSimply Thomas

Fixing 21700 batteries for spot welding

Hello. My proposal for creating battery packs for the size 21700 Print quality 0.2 Material: PLA , PLA + , PETG , Infill according to your reasonin

Downloads
317
Likes
27
Rating
1
P
PrintablesSorin B

18650 welding jig

A holder that helps welding 18650 batteries up to 6x5 cells square, or 6x3 cells tilted. It allow using nickel strips up to 10mm. No supports, no brim/raft needed.

Downloads
304
Likes
28
Rating
4
P
PrintablesSimply Thomas

Fixing 18650 batteries for spot welding

Hello. My proposal for creating battery packs for the size 18650 Print quality 0.2 Material: PLA , PLA + , PETG , ASA Support as needed Infill according to your reasonin

Downloads
290
Likes
22
Rating
5

18650 Battery Welding Jig

18650 Battery Welding Jig — 5 Slots This panel is designed to precisely align 18650 cells for spot welding. It supports both fresh and pre-welded batteries with 8 mm or 10 mm nickel strip . 📌 Features: 5 slots for 18650 batteries Suitable…

Downloads
270
Likes
31
Rating
5
P
PrintablesDamian Nowak

3x 18650 cells spot welding tool

This is a very simple tool, but also very handy, so I decided to share it. It fits 3 cells of 18650 size and squishes them together to waste as little space as possible. I've used it for spot welding tens of them and it helped me save a…

Downloads
268
Likes
54
Rating
0
P
PrintablesDennisMe

Welding Electrode Box (Parametric, vase mode)

This welding rod holder is a vase mode print suitable for tougher filaments PETG, ASA, ABS etc. Note that it is not suitable for hygroscopic rods as it doesn't seal the rods from moisture in the air. I set the extrude width to 0.8mm for a…

Downloads
258
Likes
45
Rating
0
P
PrintablesAnatolii

Welding helmet with air filtering block

Dust filtering system for chinese autodarkening welding helmet. All parts printed on my Prusa I3Mk2s. As spare elements I used 3M filtering parts.

Downloads
252
Likes
93
Rating
4.5
P
PrintablesCatman

Labubu Steampunk / Cyberpunk Welding Goggles

Welding / Protective goggles for Labubu I sewed on a 6" or so long piece of elastic through the loops to secure on the Labubu head use some plastic packaging and cut some small circles to pop into for lenses ready for action! print with…

Downloads
241
Likes
50
Rating
5
P
PrintablesNathan Milton

21700 Spot Welding Jig

I jig designed to hold up to eight of your 21700 cells together while you spot weld them.

Downloads
236
Likes
10
Rating
0
P
PrintablesAazon

Welding Purge Plugs

The regular size can fit into 2.75" to 2" piping roughly and the smol boi can fit into piping under 2" to 1" roughly Just uses the brass gas fitting that came with my argon regulator, it uses ¼ in tubing

Downloads
235
Likes
62
Rating
0
P
Printables75echo

Welding machine scale model for Dioramas 1/16, 1/14, 1/12,1/10

Their are 2mm holes for glueing a 2mm wire at the back of the welding machine and in each tool lead. Use a 2mm metal wire into the hole for the electrode. Print welding leads upright with a brim (see gcode file).

Downloads
232
Likes
45
Rating
0
P
PrintablesDarren Lynch

Friction stir welding tips for Dremel

Motivation I like doing friction stir welding for 3D prints, but when I was using the classic model on thingyverse, I could never get the tip on perfectly straight. I decided to do my own model, but instead for the 1/8th collet that comes…

Downloads
224
Likes
40
Rating
4.67
P
PrintablesRazvii

Welding mask wall hook

Extremely simple hook for my welding helmet. There's not a lot to say about it, I couldn't find a suitable one so I made it. Comes with the FreeCAD file for further modification if needed. If you'd like to use any of my models, feel free…

Downloads
212
Likes
25
Rating
5
P
PrintablesOxmstr

2170 spot welding guides 3s staggered

Spot welding guides for 2170 cells (21mm diameter, 70mm height) that are meant only for support during welding, after the pack is welded remove the guides. Category: DIY

Downloads
208
Likes
36
Rating
0
P
Printableszenon Zenon

third hand welding

c'est bien mon modèle (f3d a l'appui) vu la simplicité de modélisation je n'ai même pas eu envie de chercher. pas de complexité pour l'impression

Downloads
203
Likes
44
Rating
0
P
PrintablesZALE DFM LAB

21700 Li-Iron Battery Base for Spot Welding (4S Pack)

21700 Li-iron Battery pack Base for Spot welding 4S pack.

Downloads
197
Likes
9
Rating
0
P
Printables3DDom

Welding Table Plug

Welding Table Plug for 16mm Holes. O-Ring is 10x1,8mm PETG or Tough PLA

Downloads
191
Likes
47
Rating
5
P
Printablesmcnaughty

welding electrode holder

Tig welding tungsten electrode holder there is files for both 1.6mm and 2.4mm the top suits both with a gridfinity base, loop at the top for a lanyard or carabiner or can be stored in a pocket or tool bag. Each tube can hold 19 electrodes…

Downloads
191
Likes
34
Rating
0
P
Printablesdoragasu

21700x5 Battery Welding Guide

Guides for welding up to 5 x 21700 LiPo batteries together. FreeCAD file is included for easy remixing.

Downloads
189
Likes
30
Rating
5
P
Printablesharrisonpatm

18650 Cell holder, 4x6, for Spot Welding

Remix of @RinoaLilieu_609203 cell holders. I made the gap between the cell contact and the bottom of the holder much smaller, so nickel strips for spot welding will make much better contact.

Downloads
186
Likes
15
Rating
0
P
Printablessmoura

Welding Mask

Welding mask 2x4 lens. I print them in PETG at least and use with Ameriarc lens. Made to be used with “ Esab Head Gear Warrior Tech” but I believe that other headgears will fit also. Depending on the color of your filament, is possible…

Downloads
171
Likes
16
Rating
0
P
PrintablesOMH

Welding Classroom Display Models

3D Printed Welding Models: T-Joint & Butt Weld Educational Tool Description: These 3D printed models are designed to visually and physically demonstrate the two fundamental types of welds—T-joint and butt welds—in an educational setting.…

Downloads
170
Likes
49
Rating
0
P
PrintablesControl 3D

Soporte soldadura | Welding tool

Este diseño es uno de los ejercicios de nuestro nuevo curso de diseño 3D avanzado con Fusion. Info del curso aquí https://control3d.net/curso-de-diseno-3d-fusion-nivel-intermedio/ Suscríbete aquí https://control3d.net/registrate/ Soporte…

Downloads
170
Likes
84
Rating
5
P
PrintablesS.Sherman

Welding Rod tube dividers

** If you find my designs useful, please tip $2 by clicking “Support Designer” on my main profile page. Thank you!! *** Print Settings Printer brand: Creality Printer: Ender 5 Rafts: No Supports: No Infill: 10 Filament brand: Hatchbox…

Downloads
170
Likes
53
Rating
0
P
Printablessnowboarder

Welding Mask Wall Hook or motorcycle helmet Wall Hook

Originally designed for a Welding Mask wall hook but I have printed off a few more to use as motorcycle helmet Wall Hook after testing its durability. I have included the prusaslicer setup file which includes cylinder modifiers to…

Downloads
164
Likes
24
Rating
5
P
PrintablesMattmannz

Welding fixture jigs

Love the Fireball tools fixture clamps and jigs so designed and printed some basic models. Printed these in PETG-CF at 100% infill so they are reasonably strong. Used M6 heated inserts to be able to bolt tabs to them for guidance and/or…

Downloads
162
Likes
27
Rating
0
P
Printablesomri hadar

18650 2p spot-welding jig

get 2p connections perfectly spaced every time

Downloads
162
Likes
14
Rating
5
P
Printablesndl

Battery welding aid

Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: No Resolution: 0.2 Infill: 25 -40% Filament: Generic ABS doesnt matter Notes: Print in ABS, Infill: 20-40%, Speed: 60mm/s, Bed: 90 degrees Celsius, Noozle: 240 degrees Celsius

Downloads
160
Likes
16
Rating
0
P
PrintablesSanchez

Network extension cord on a spool of filament or welding wire (15 kg)

This model will be useful for those who have empty filament spools and don't know what to do with them :) Before you start, you need to buy some parts, presented in Table 1. Table 1 Buy this position Position Named Quantity of pieces…

Downloads
155
Likes
64
Rating
0
P
PrintablesLee B

Welding Hood Flashlight Clips

I had trouble seeing my test pieces in my school's dark welding booth so I modeled up these clips that mount under the adjustment knobs on the hood's temples and hold small flashlights. There are 2 different sets of files, one for lights…

Downloads
152
Likes
48
Rating
0
P
PrintablesDIY500AMP.COM

21700 cells Parallel stackable tray with screws. No welding required.

21700 Cells Parallel Stackable Tray with Screws – No Welding Required This tray is designed for parallel connections. It has a slot for a nickel or copper strip up to 10mm wide. ⚠ CAUTION: Make sure to install the cells in the correct…

Downloads
151
Likes
36
Rating
0
P
PrintablesNoel Swede

TIG welding rod holder 2 in pvc

Rod holder with removable top cap. I did fuzzy skin on the cap for 50mm to make it easier to use.

Downloads
151
Likes
25
Rating
0
P
Printables75echo

Welding man for workshop diorama

1:14 scale model of a man sitting and welding

Downloads
149
Likes
25
Rating
0
P
PrintablesNtr81

Stojak do spawania akumulatorów 18650 (18650 battery welding stand)

Stojak do spawania akumulatorów 18650 w różnych konfiguracjach pakietowych. Do sprawnego i precyzyjnego łączenia w pakiety warto użyć dwóch sztuk do łapania akumulatorów na górze i dole, otwory pozwalają na bezproblemowy demontaż.

Downloads
148
Likes
10
Rating
0
P
Printablescr15

18650 Battery Spot Welding Jig

this is just what seemed to me the missing piece of the original

Downloads
143
Likes
10
Rating
0
P
Printablessyntetyczny

18650 battery spot welding jig

I've mage that jig for creating custom batteries for my tools. It is created inspired Chinese jigs however it is is much safer.

Downloads
141
Likes
17
Rating
5

Slot case battery 18650 for welding battery magnesium stripes

Slot case battery 18650 13 cells x 5 for welding battery magnesium stripes. Design to have a compress but rigid frame for batteries of big format of cells. this case 13 cells. .8 walls & space 1.4mm

Downloads
138
Likes
24
Rating
5
P
PrintablesJeremy Wang

8 cells 18650 spot welding jig

Print with External Perimeters First.

Downloads
135
Likes
10
Rating
0
P
PrintablesSsgtStretch

Welding Fence Block 16mm 2in center

These are fencing blocks and locating pins for use on a 2 inch on Center metal Fabrication table with 16 mm holes. Yes they're made of plastic and they will melt if you try and weld too close to them. But they're certainly a lot cheaper…

Downloads
135
Likes
43
Rating
0
P
PrintablesHighTechRedNeck

Filament welding vise

So, having bought myself a heated filament clamp for “welding” filament scrap together, or joining short rolls, I found a problem immediately. The instructions seem to assume the existence of a third hand, or second person to be able to…

Downloads
131
Likes
42
Rating
0
P
PrintablesBarras 3D

18650 inline welding jig

When you are building battery packs from 18650 cells and you want to lay them out end to end the normal way todo this is to stand two cells side by side and to then weld a tab across and fold. This results in a small part of the nickel…

Downloads
131
Likes
26
Rating
5
P
PrintablesAnatolii

Welding helmet duct

Site users asked me to give the files of the inner duct for the helmet. Here you find them.

Downloads
131
Likes
37
Rating
5
P
PrintablesAndrey

Filament welding/splicing jig

4 versions are available: with (recommended) and without 4 mm hole for PTFE tube and with (recommended) or without side clips to ensure that rig won't open midprocess (though connecting pins should fit quite tight and hold it good enough…

Downloads
125
Likes
21
Rating
5
P
PrintablesNewtle Kim

Spot Welding Machine Enclosure

I designed models for making spot welding. you can make cheap spot welding using the models. you can also refer to video below. I bought some stuffs below. spot welding controller :…

Downloads
123
Likes
34
Rating
0
P
PrintablesDMTMKGWM

Welding Standard Template

A template for easily drawing welding symbols

Downloads
119
Likes
42
Rating
3
P
PrintablesNEMATEQ

Welding smoke extractor - Extracteur de fumée de soudure

Here's a completely 3D-printed welding smoke extractor, complete with computer fan and activated carbon filter. It's important to protect your health when soldering. This DIY welding fume extractor will help you do just that with its…

Downloads
116
Likes
40
Rating
5
P
PrintablesMatej

Welding Rods Electrode Storage Box

Storage box from HT pipe for keep dry welding rods with silicagel. Two sizes DN50, DN75 are available.

Downloads
112
Likes
38
Rating
4
P
PrintablesTritschi

Welding Jig for Handrails on Railing (Schweißvorrichtung, Schweißhilfe)

Friend of mine builds railings for offices and homes. Mostly in stainless steel. A post, a mounted cylinder with Ø12mm pin. Stainless tube on top and weld it. Now the purchased jig was worn out and he needed replacement. As the…

Downloads
110
Likes
17
Rating
0
P
PrintablesPaPa Dad
Downloads
110
Likes
34
Rating
4
P
PrintablesNetpackrat

Gridfinity Tray for TIG Welding Tungstens

I recently upgraded one of my welders to a more versatile, higher output unit. I ended up buying new tungstens in more sizes than I used with my old welder, and I also also moved my welding accessories into a different tool cabinet. Since…

Downloads
102
Likes
23
Rating
5
P
PrintablesLuky Longi

18650 holder for welding

I made a holder for welding batteries, if you need to make a battery pack that you will put in an insulating tube. The gaps between the batteries are 1.7mm, this is the standard distance between the batteries that most puzzle holders for…

Downloads
100
Likes
25
Rating
5
P
PrintablesPugPotatoBody

Dremel Friction Welding Bits with labels

Great model maybe made a bit better?

Downloads
99
Likes
13
Rating
0
P
PrintablesHenares3D
Downloads
98
Likes
12
Rating
0
P
PrintablesDavid Holecko

Battery Holder - spot welding

Holder for 21700 Li-Ion batteries designed for spot welding and easy battery pack assembly. It supports S2, S3, S4, and S6 configurations, ensuring precise spacing between cells and a secure fit during nickel strip welding. The model is…

Downloads
97
Likes
9
Rating
0
P
Printableshassan almalki

Welding extra hand

model using fusion 360 printed using Cr10se PLA at 300 speed no support

Downloads
96
Likes
15
Rating
5
P
Printablessmoura

Welding Mask for Honeywell Flip-Up

A remix of my original mask to use with Honeywell Flip-Up (like in the picture)

Downloads
94
Likes
6
Rating
0
P
Printablesbiehler-josef

WIG / TIG filler rod / welding wire HT DN40 organisation system

I cut a 1 meter pipe into two parts. The lower part is 80 cm and the upper part 20 cm. You need: 1x Wandhalter Boden (Wallmount bottom) The diameter of the holes are bigger than the pipe's diameter because it has to fit the lid (Deckel)…

Downloads
94
Likes
23
Rating
0
P
PrintablesMarek Čopjak

Wallmount for MIG MAG welding wire roller

Wallmount for MIG MAG welding wire roller. Material ASA Layer 0.2mm Infill 20% MIG clamp i used https://www.thingiverse.com/thing:2786823 Material PETG Layer 0.2mm Infill 20%

Downloads
93
Likes
32
Rating
5
P
PrintablesRESTLESS DESIGN

Welding Helmet Bracket/Holder

I modelled this bracket which allowed me to hang my welding helmet on my clothing rack. Easy to print without any advanced settings or support needed. Additionally, there is a hole in the back for an M5 bolt with which you can secure this…

Downloads
89
Likes
32
Rating
5
P
PrintablesHeinrich

Size-adjusting knob for welding helmet

The adjusting knob for changing head sitze of my (no-name) welding helmet broke. The replacement supports the pins more. The original knop also had 4 pins, but they were only connected at the bottom. The pins on the replacement are…

Downloads
87
Likes
6
Rating
0
P
PrintablesAseris

M16x1.5 nut for TIG welding torch

M16x1.5 nut for TIG welding torch connector as a replacement of original 10mm nut.

Downloads
83
Likes
7
Rating
0
P
PrintablesTomaskutta

Welding helmet - fastening

. Category: Automotive

Downloads
82
Likes
24
Rating
5
P
PrintablesKaden Flick

Tig Welding Filler Rod Barrels

These are what I came up with to organize all the small pieces of filler and tungsten that have accumulated at the welding bench at my work. All the barrels have a spot to press fit an 8MM x 4MM Magnet in the bottom.

Downloads
82
Likes
23
Rating
0

Welding Helmet Adjustment Sprocket (Chicago Electric)

This is an replacement adjustment sprocket for the back headgear of a Chicago Electric welding helmet. Our shop helmet is heavily used during the farming season, and this was a cheap and fast 20 minute print fix, instead of driving to buy…

Downloads
81
Likes
16
Rating
5
P
Printablesamckimmey

Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft

Welding Cylinder Spacer with rod holders- 7in 80/125/150 cuft I bought from Harbor Freight the Chicago Electric 100 lb. Capacity Welding Cart, simple cart, but wanted to stabilize and space out my welding gas cylinder. I designed this to…

Downloads
79
Likes
26
Rating
0
P
Printablesbuho29

head lamp holder for welding mask

head lamp holder for my welding mask https://www.amazon.es/gp/product/B07Y21GMKQ/ref=ppx_yo_dt_b_asin_title_o00_s01 https://www.amazon.es/gp/product/B073PWQWJJ/ref=ppx_yo_dt_b_search_asin_title 2* M3 sourcefile disponible (solidwork)…

Downloads
78
Likes
32
Rating
0
P
PrintablesGareth79

Argon/welding regulator dust cover 5/8" BSP RH thread

I often store my regulator in a dusty area, so I made this cover to screw on the end to help keep dust/dirt from getting in. Most regulators do have a mesh screen inside but you still don't want any more dust than necessary getting in.…

Downloads
76
Likes
8
Rating
0
P
PrintablesDIY500AMP.COM

18650 Cells Parallel Stackable Tray with Screws – No Welding Required

18650 Cells Parallel Stackable Tray with Screws – No Welding Required This tray is designed for parallel connections of 18650 cells , featuring a slot for a nickel or copper strip up to 10mm wide . It allows for secure assembly without…

Downloads
75
Likes
10
Rating
0
P
PrintablesDhart

Miller/Hobart mig welding tip holder

Mig welding tip holder with two 20x3 holes on back that support magnets Has threads for tweco style welding tips I printed mine without support with a 0.4 nozzle and .16 layer height

Downloads
75
Likes
18
Rating
0
P
PrintablesEDGeProjects

Hexagon jig for woodworking or welding

Made a useful basic jig for welding/woodworking creating hexagons. Two versions, one is solid and the other has holes. If you're printing this jig, I dont need to tell you to cut your angles at 15 degrees on your material.

Downloads
74
Likes
23
Rating
0
P
PrintablesRegithalli

18650 HOLDER FOR WELDING

This holds 18650 battery's together for making pack of 4. There is a relief at the bottom for the holder for any protrusion as well as the gap between the cells are 10mm to accommodate a Nickle strip. I used this for making quadcopter…

Downloads
74
Likes
5
Rating
0
P
PrintablesEzequiel

Welding Dispenser with Spool

--Ultimaker Cura Settings-- Layer Height - 0,2 mm Print Speed - 50 mm/s Wall Line Count - 3 Build Plate Adhesion Type - Skirt or Brim

Downloads
72
Likes
15
Rating
5
P
PrintablesAdam Oellermann

LiPo Cell Spotwelding Jig

Instructions Either use one of the supplied STLs, or to generate your own jig: Open jig.scad in OpenSCAD Set the parameters for the size of the jig. The main parameters are: num_cells: the number of cells you wish to spot weld cell_diam:…

Downloads
69
Likes
4
Rating
0
P
PrintablesYuri

Welding helmet friction hinge repair

Friction hinge for welding helmet (goes by many names: Rilimo, NDUUN, TOOLIOM etc) The hinge hardware was 100% plastic and broke of. This replaces the hinges based on a M8 bolt and nut. This will be the last thing to ever break on the…

Downloads
69
Likes
19
Rating
5
P
PrintablesFun King 3D

Harbor Freight Welding Cabinet Drawer Bins 63179

These bins fit the steel dividers in the top drawer of the Harbor Freight Vulcan welding cabinet number 63179 https://www.harborfreight.com/heavy-duty-large-welding-cabinet-63179.html The divider is not fixed to the drawer and I did not…

Downloads
68
Likes
9
Rating
0

Li-ion 18650 battery accu cell welding frame

There are a few 18650 battery cell designs out there but nothing i really liked, so i've made my own design. Improvements: - Lightweight (only 0,65g per piece) - better mechanical fixture then the other models - free spaces between…

Downloads
67
Likes
9
Rating
0
P
Printablesmallison01

Welding Helmet Hook

Just a Simple Welding Helmet Hook and matching jig, the jig also works for my remixed hook. there are 2 versions here, v1 is a little bit smaller, v2 is a little longer and has a bigger lip. Id print on its side for the best strength with…

Downloads
67
Likes
9
Rating
0
P

Hobart Creator Welding Helmet Hinge Bolt Assembly

The hinge bolts that come with the helmet are plastic and very weak. It's too easy to overtighten the helmet (to keep it from slipping down) and break them. Hardware Required 2 * M6x25 Hex Head Bolts Print Settings Infill - 100% Perimeter…

Downloads
65
Likes
6
Rating
0
P
PrintablesMatthew Barton

Welding rod container lid

Replacement lid for Rod Guard welding rod container.

Downloads
65
Likes
22
Rating
0