First layer test 100x100 mm square
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
- Downloads
- 13,201
- Likes
- 207
- Rating
- 4.89
Counting matching models…
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…
I needed a new calibration print to dial in my stepper motor to achieve great dimensional accuracy at a larger scale than just a simple 20x20x20 cube. Was looking and found this from Collect3D on thingiverse. Remixed it to have larger…
This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch (no reverse engineering). The case…
Are you feeling overwhelmed by your monitor taking up too much space on your desk? It's time to take a stand and reclaim your workspace with this French cleat, low profile monitor wall mount. This mount is designed to be both strong and…
Someone needed the original container with an adapter for the great HSW , so I added some with my rather limited modelling knowledge ;-) Added models with the HSW attachments in the middle or at the top by request. I have not printed…
There are no details here except those that you can print yourself. Supports should only be set when printing Base_gr and Base_top, the overhang angle of the support is 82 degrees, so that the support is not printed in the holes,…
A simple monitor holder for Ikea Skadis. Suitable for Vesa 100x100. Separate the model into two parts in the slicer and turn the two parts to the side of the hooks. so no support structure is necessary. I recommend at least PETG! Eine…
All the credit to the original designer (and for providing step files). I wanted a VESA mount for the back of my monitor and I was able to build off of Frogree 's design that also supports the Geekworm X1001 Pcie M.2 NVMe adaptor. Enjoy!…
1st layer test by 0.2 layer height
Simple low profile wall mount for 100x100mm and 75x75mm VESA monitors. I used it to mount my 34" ultrawide and it worked like a charm. Because of the low profile, 4 screws and angled dovetail it's very easy to install and very strong. Use…
Just a 100mm x 100mm x .2mm for 1st layer check
I've tested it on Fujifilm X100T and X100F, but it should work with X100, X100S, and X100V too. It has a snug fit so it won't need a screw to stay in place like the ones you can buy do.
Honeycomb Grilles These are a couple of honeycomb ventilation grilles I designed to create some airflow in the electronics cupboard of my van. They are designed to fit a square hole of size 150 x 100 mm or 200 x 60 mm and are fixed in…
Higher case to fit Geekworm X1001 NVMe Hat I guess it can fit other hats too given they're similar in hight to the NVMe hat.
This mount was designed based on the model by @DaveWoodX . If the actual computer's dimensions differ upon arrival, I will update the design accordingly. Update: Added v1.5 to add strength to the fingers that hold the mini into the mount.…
Transform your ultra-portable Arzopa Z1FC 16.1" 144Hz gaming monitor into a permanent workstation setup! This custom 3D-printed adapter adds standard VESA 100x100mm compatibility , letting you mount it on walls, arms, or stands for…
These are the parts I constructed to modify the monobloc air conditioner PAC EX100 from DeLonghi from 1 hose to a two hose setup. The parts are relatively big, since the air intake area on the air con is quit big. The parts fit the Prusa…
A handy holder for TVs or monitors that allows rotation and tilting. Suitable for your office, workshop or public areas for information monitors. This holder is sturdy even if you print it with PLA (also in my case) and comes with VESA…
This is a candle mold container for 40mm diameter and max 100mm tall candle. Lock the mold container with a ziplock Put the candle string through the bottom lid and tape it to lid's hollow Attach the bottom lid to the bottom of the mold…
I designed this simple monitor mount to use for a 24 inch 100x100mm compatible monitor. Material needed: This mount needs 27-28mm wooden roundstock found in hardware stores. Cut to length to determine the height of the monitor. Keep in…
I tried many of the thumbgrips I found online, but I didn't like any of them so I made my own. I took the best of all designs I tried and combined it into one design to rule them all. You might need to sand it down a little for a smooth…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 12 platform_width = 100…
I'm not a 3D Model designer but I really want a case for my Pi 5 which also uses Geekworm X1002 HAT with an NVME SSD. So I remixed the case model by @pyrho as I really like it and made it fit the Pi 5 with the bottom NVME HAT. I also…
honeycomb basket for heavy items
The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Jednoduchý organizér pro cokoliv. Tento byl dělaný pro makeup, ale použít se dá jakkoliv. Ať slouží… v2 - Pro lepší tisk jsem nahrál části odděleně. A simple organizer for anything. This one was made for makeup, but can be used in any…
Warning: Do not use a printed tube to make a moderator. A moderator of any length, including an integrated one, can be assembled from a set of cones. The moderator is assembled on the basis of a 40x1.5 mm aluminum tube. Secure the covers…
From the original creator: This model was inspired by another model https://www.printables.com/model/924041-raspberry-pi-5-case-with-pineberry-hatdrive-bottom , but it's not a remix. The case was designed completely from scratch. The case…
Collection of screws (ISO 4017 / DIN 933) including : M12x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…
Print worked perfectly with PETG, 0,1mm setting. Infill doesn't matter.
Print this out, measure with calipers after it has cooled down to room temp, adjust esteps based on that. X and Y corners are rounded so if you don't have pressure advance on, it won't mess up your measurements
An osVAC-compatible dust extractor which can be installed on a 20mm multifunction table (e.g. Festool or Wolfcraft MFT). I adopted the original design by ggragg to add an osVAC adapter. The 20mm mounts for the table are the orignal ones.…
Hexagonal junction box with plain screwed lid - Cassetta di derivazione esagonale con coperchio basso a vite External dimensions - Dimensioni Esterne 112x100x50mm Surface-mounting enclosure Suitable for: Resize to adjust dimension All our…
Simple remix of the original Vesa flat mount but with a 100x100 spacing Print instructions Print flat on whichever side, recommend at least 3 perimeters.
15% infill .2 layer height no supports
Changelog: 2023.04.07: Fixed scaling problem.
Sturdy VESA 100x100 Adapter to enable wall- or tablemounting for the MSI Optix MAG341CQ (German/ European Version, so check your monitors interface before printing, MSI seems to have at least one other version distributed in North…
Modified the original by cutting the model and moving it so the mounting holes are at 100x100mm spacing. Then extruded the cut sections back so that the original mount still works the same as it used to.
This is my monitor stand, which I built for an old monitor of mine, because I didnt just wanted to buy one from Amazon . The finished thing should weigh around 500g.. I think (I forgot to weigh it before I mounted the monitor on and now…
A more substantial grip for the Sony DSC-RX100 camera. Tested only on Mk2 and Mk1. Print instructions Category: Camera Summary A more substantial grip for the Sony DSC-RX100 camera. Tested only on Mk2 and Mk1. Print Settings Printer…
This are 3D models of a Aluminium Profile. This project was made in Autodesk Inventor 2021. There are different lenghts of profile, and you can choose what lenght you want. If there is a specific length required, pleas contact me and I…
created this Box for a Garage door opener using an ESP D1 Mini Controller and a Relayboard. Stepfile is included to make your own Version. Layer Height: 0,2mm Infill: 30% Material: PLA M3 Heat inserts used for mounting the Boards and the…
Remix of Alvin's remix to add 100x100mm VESA mounting tabs.
The purchasable version is overpriced and also from 3D printing. So I have drawn my better variant. Just use the sheet metal and the original screws, they fit perfectly! Printed from PETG. Category: Office
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
I found the VESA adapter from Uhrensohn brilliant, but for my monitor, which I really wanted to attach near the wall, the adapter is pretty thick. Also I noticed that the original cutout for the panhead screw was not deep enogh to fit my…
VESA mount for 3" T-slot slatwall systems, such as NewAge slatwall system, or Gladiator slatwall system. Print standing upright/vertically with no supports using PETG. Attach your display to the VESA mount with 4 M4 screws, then hang the…
Vial racks for 4ml - 12ml vials. Each vial rack includes text on the side so that the users can avoid overheating the plastic racks. These should just fit on a 200mm wide bed. They hold 50 vials.
STL file of the legendary Sony VX1000 loved by all skaters.
This is a 100x100x100mm cube. This allows great accuracy when printing future models. This allows you to see if you printer is not quite meeting the exact points needed when printing. If these points aren't met models can be too big or…
This is one of the models that I designed and printed out on our SLS Machine for fun. It is not optimized for FDM. I might eventually do it in the future. It is 100 x 100 mm with interlinked single elements. I have attached some images of…
If you print one of these, I would be glad if you post the print here :D.
Wiha 31115 Phillips Screwdriver with SoftFinish Handle, 2 x 100mm PH2x100 You can find the step files here: https://www.printables.com/model/656202-screw-driver-wiha-honeycomb-storage-wall-step-file
I have used PETG to print this model. I have purchased set of M4 16mm screws. Suggested print settings (see .3mf file) for 0.6mm nozzle: - Nozzle: 0.6 mm - Perimeters: 8 - Infill: 100% - Temperature: increase by 10°C over the default…
100x100x50 mm / 4mm dick, gedruckt mit 0,2mm Schichthöhe / 4 Wänden / 25% Füllung
Collection of screws (ISO 4017 / DIN 933) including : M16x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit…
See my newer model for a remix of this in a complete project: https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor. It will attach it to…
This is an adapter to mount a TV with a 200mmx150mm VESA hole pattern to a mount with 100mmx100mm or 75mmx75mm pattern. I bought a small 32" TV for my office, and also got a cheap wall mount that said it supported 32" TVs, however the…
Summary Customized version of https://www.thingiverse.com/thing:881114 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=881114 Instructions Using the following options: link_size = 10 platform_width = 100…
Print-in-Place Hinged Box – No Magnets, No Assembly! Upgrade your storage with this fully 3D-printable hinged box , designed for print-in-place convenience ! The integrated hinges work right off the print bed— no assembly, no supports,…
VESA 100x100 adapter for Iiyama 200x100 (6 screws). Print without supports, there are thin layers above hexagonal head to puncture/drill after printing. Part list: about 120g of PET-G 6x M4x20 6x M4 washer 4x M5x20-30 screw with hexagonal…
to be attacher with 3M VHB 5952 1" double sided tape
Geometric Shelf Bracket 2 150x100mm - Reggimensola Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
A square pattern for testing a first layer bed scan
English: I found this thing: https://www.thingiverse.com/thing:1962611 to mount my 24"-screen to the wall. since the case of my screen seams to be not the stiffest one, and the parts had a little bit loose fit, the screen leaned forward…
Imagine heading out on your next fishing trip equipped with the latest innovation from Mammoth-3D: the Luare fishing lure. This lure is a game-changer, designed with cutting-edge 3D printing technology that offers unmatched precision and…
Printed on Anycubic VYPER. Wall tickness 2mm. Layer print 3mm. CURA settings on attached pictures. Printer calibrated and firmware updated with ZOMBIE_VYPER from YT.
Rack shelf for DLINK switch 8 port. To be mounted in server. It works printed from PLA but best is ASA (heat resistant). Switch taped with double sided tape on two 5cm strips. I printed 0.2mm PLA with 4 perimeters and infill 5%. Works…
The stock mounting plate for the DJI RS3 Mini gimbal has a lip at one end meant to keep the plate orthogonal to the camera body, but it interferes with the front of the Sony RX100 (and likely other smaller cameras) that have the outside…
Adapter to mount a Samsung LS24D-Series Monitor on a standard VESA 100x100 mount. Print the Base, the Pin and the Shell separately and use a threaded insert in the base. Fit the Shell around the Pin and screw the Pin onto the base. Some…
0.20 mm layer height 0.40 mm nozzle infill as you see fit, I went with 30%
A simple bracket to hang a mini pc on a tv stand
Recommended to print in Vase mode with wall thickness of 0.8mm. Bottom layers more than 2. If you print it with vase mode, the box can withstand quite a beating, and also it makes it smoother and less break prone when separating boxes.…
I replaced the double-DIN touchscreen stereo in our 2012 Subaru Impreza Sport Limited with an aftermarket SONY XAV-AX100 (which I really don't recommend) and could not find an appropriate trim piece specifically for the Sport Limited. The…
Collection of screws (ISO 4762 / DIN 912) including : M20x 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
just a simple wall mount for an hp mini PC. NEED: 4x - M4x10mm buttonheads 2x - 2.5" drywall screws You'll need four M4x10mm button head machine screws to attach it to the back of your PC. I have included some screw caps for the heads, so…
Fuji X100V / X100VI camera filter adapter 49mm - angular version II Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of…
UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…
Collection of screws (ISO 10642 / DIN 7991) including : M10x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Collection of screws (ISO 10642 / DIN 7991) including : M14x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
This model is an adapter from Vesa 100x100 to 200x200 , i used it to mount a tv on a Vesa 100. This model uses additional parts: 4x M4 Screws. 4x M4 threaded inserts (6mm diameter, 6mm length). I don't raccomend using this adapter for tvs…
Cosmetics basket 90x190x130/ 130x200x100 ŠxDxV (DxLxH) No support
A 24mm high spacer to fit into the Dell S3222HG monitor's recessed VESA mount so that larger VESA plates/rails can be used. Its overall dimensions are 121 x 121 x 24mm. Make sure to use the appropriate length screws to prevent damaging…
Needed adapters for my new gravel bike. Already had them for my boost spacing mountain bike. PETG for temperature and exposure 100% infill print upside down
A 3D printed toolbox is designed with the goal of achieving tool freedom, and it can be used directly after printing without assembly. The box joints are designed using snap-fit connections. It is recommended to print with a layer height…
I didn't find a simple 100x100mm silica box, that i can print on my Voron 0.2, so i decided to do a quick simple one with heat set inserts an a screwed lid. The big box fits around 320g of Silica beads (See pictures). The small box fits…
100x100 square saucer Square flower pot: https://www.printables.com/pl/model/165712-100x100x90-square-flower-pot
Action camera helmet side holder I made this holder to be connected directly on helmet by 3M VHB tape or zip tie. However zip ties requires to makes holes into helmet, which is not recommended way ( keep on mind that any modification of…
After misplacing my own lens cap I designed a snap-fit lens cap. I looked at various sites and there were caps with people's personal brands, caps with no logo, caps with the logo as text. I wanted the actual Fujifilm logo, so here we…
Hello, A fixed mount for a VESA 100 x 100 screen. Installed on my 27" monitor without any issues. Infill > 40% for secure fitting. good prints
Collection of screws (ISO 10642 / DIN 7991) including : M16x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.…
Was sick of the non-adjustable stand so I bought a VESA mount for my monitor but adapters were around $30 on amazon so decided to make my own. The VESA adapter is designed for the MSI optic G24C however may work for other monitors.…
A 50 gram 10x10x1.5 cm waffle with 36 holes. Takes 3 hours to print on ender 3. Print settings no supports
I had a Dell P2217H monitor that broke, so I bought a new monitor, the SE2222H from Dell as well. The stand of the old monitor was much superior to the new one, so I decided to swap them, and to my surprise, I realized they were not…