P
PrintablesJeffL
Case for ESP8266 board and DHT12 sensor
ESP8266 and DHT12 Case
- Downloads
- 165
- Likes
- 42
- Rating
- 4.8
Search results: 826
510 models
P
Printablesrkemendi
NodeMCU ESP8266 version 0.9 by Plusivo Case rev 2.5
Since I could not find a case to fit my Plusivo NodeMCU v0.9 boards, I adapted one. The ideea is based on two Tinkercad designs: The cutout in the top of the case (I re-used this for the cutout) :…
- Downloads
- 101
- Likes
- 8
- Rating
- 0
P
PrintablesAirX
Wago 221-420-to-Breadboard Box for 1-Wire, ESP8266, ESP32, Homeassistant etc.
Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…
- Downloads
- 89
- Likes
- 23
- Rating
- 0
P
PrintablesSolsken106
Box for ESP8266 HomeKit infrared remote
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
- Downloads
- 55
- Likes
- 15
- Rating
- 0
P
PrintablesPlanmarks
ESP8266 Pocket Deauther Mini
ESP8266 based Deauther with 0.96" OLED display and lipo battery using store bought hardware and Spacehuhn software. 3MDF files. Use them with any slicer. For case: Infill 20%+ For hardware you will need: 1) 1x ESP8266 NodeMCU 2) 1x 0.96"…
- Downloads
- 50
- Likes
- 20
- Rating
- 0
P
PrintablesTomas Beran
oled128x64_096-esp8266-box
3D printable box for Wemos ESP8266 D1 mini and 128x64 0.96'' OLED display for Display: LaskaKit OLED display 128x64 0.96 I²C Wemos: WeMos D1 Mini Pro 16MB ESP8266 WiFi Module !!! Be careful !!! This model IS NOT for this display…
- Downloads
- 20
- Likes
- 2
- Rating
- 0
P
PrintablesJacob
Wall-Mount for ESPHome Sensor (8266 Temp/Humidity/Light)
A custom-designed wall mount for the ESPHome 8266 Temp/Humidity/Light Sensor , providing a secure and neat installation. This mount allows easy access to the sensor while keeping it organized and functional in any room. Designed to be…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesDavid Vancl
Infinity Cube Lamp – ESP8266 RGB lamp with IR remote and OTA updates
The Infinity Cube is an open cube frame lamp balanced on one corner on a round base. An RGB LED strip runs inside the edges behind a diffuser, so the whole frame glows. An ESP8266 NodeMCU runs it with open-source firmware. Features Full…
- Downloads
- 7
- Likes
- 5
- Rating
- 0
P
Printablesseraphx2
Wemos D1 Mini ESP8266 Case
A case for the Wemos D1 Mini ESP8266 PCB. It has holes on all 3 walls partially for ventilation but mostly for wire pass-throughs to make running wires in different directions easier. There are holes for the reset button on each side…
- Downloads
- 1,555
- Likes
- 122
- Rating
- 4.92
P
PrintablesMakers Mashup
NodeMCU ESP8266 Case Rev1
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
- Downloads
- 1,470
- Likes
- 66
- Rating
- 4.5
P
PrintablesMihai
esp8266-case
OpenScad case for esp8266 development board. Thanks to Sergio Vilches for the rounded corners!
- Downloads
- 1,307
- Likes
- 129
- Rating
- 4.67
P
PrintablesF14V
ESP8266 nodeMCU V2 Case
Fusion 360 source file available! UPDATE 27.03.19: Remodeled designs from scratch in Fusion 360 and added slots to fit full size dupont connectors as follows: V2 - similar to the original but with duponts V2_Hollow - hollow bottom, more…
- Downloads
- 1,208
- Likes
- 94
- Rating
- 4.92
P
PrintablesChas1397
ESP8266 NodeMCUv2 Tall Case
This case allows you to put the dupont wires inside the case rather than outside (in case you have a cat that likes to knock your stuff around). It provides a bit more security to keep things from being disconnected.
- Downloads
- 1,067
- Likes
- 80
- Rating
- 4.82
P
PrintablesSergio Morales
7 segment esp8266 wall clock
You will need neopixel stripes and a microcontroller. I used an esp8266 for wifi sincronization. I used 4 neopixel per segment to improve the color persistance. https://www.facebook.com/media/set/?vanity=Menyiques&set=a.10213457141085498…
- Downloads
- 1,040
- Likes
- 341
- Rating
- 5
P
PrintablesThomas
ESP8266 NodeMCU v3 Din Mount
just a stretched version fitting ESP8266 nodeMCU v3 from https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/samwiseg0/esp8266_nodemcu_din_mount by samwiseg0
- Downloads
- 782
- Likes
- 71
- Rating
- 0
P
Printablesdon frechdachs
NodeMCU (ESP 8266) Case
Hello friends this is a simple case the Node MCU (ESP 8266). Route the cables through the case bottom before you solder them to the Node MCU. Support is needed for the Case Bottom. Print Settings Printer Brand: Creality Printer: Ender 3…
- Downloads
- 754
- Likes
- 77
- Rating
- 4.88
P
PrintablesSpacehuhn
D1 Mini Case ESP8266
It's made for the LOLIN D1 Mini v4.0.0. The case doesn't fit older versions of the D1 Mini with micro-USB or components on the backside. Video: https://youtube.com/shorts/DUVmJcQiBqA Buy: https://spacehuhn.store/products/deauther-d1-mini…
- Downloads
- 734
- Likes
- 63
- Rating
- 4.5
P
PrintablesConfusedChicken
NodeMCU V3 (ESP8266) Case
There are 3 parts to this. The top, bottom and an accent colour board (for some extra fun). The design doesn't serve too much of a practical purpose (the hexagons look cool) but, the pins are recessed into the case to prevent them from…
- Downloads
- 616
- Likes
- 39
- Rating
- 5
P
Printablesryandam
Node Robot Platform - SMARS inspired using ESP8266
Node Robot Platform using ESP8266 for robotic development. This project is inspired by the SMARS robot but use ESP8266 as it heart for out of the box remote control. Hardware Needed hardware (all the link is for reference): 1x ESP8266…
- Downloads
- 600
- Likes
- 168
- Rating
- 5
P
PrintablesMiceciCZE
Case for ESP8266MOD
Key Features: Identification: The "ESP8266MOD" text is embossed on both the top lid and the side of the base for easy identification. Functionality: The top panel includes a rectangular cutout for a display (or pin access) and two…
- Downloads
- 597
- Likes
- 22
- Rating
- 0
P
PrintablesBri0nac
ESPHome Sensor - D1 Mini ESP8266 USBC and LD2410 case
This case has slight changes to it and is based off of Digital Juice 's. This update fits the LD2410 with or without dupont wiring and the USB C version of the D1 mini ESP8266. I included a text file of the .yaml file that is working for…
- Downloads
- 579
- Likes
- 63
- Rating
- 4.5
P
PrintablesFutureLab
MAX7219 dot matrix and WeMos D1 Mini ESP8266 case
Case for multible ESP3266 dot matrix projekts. There are many projekts online, just search the web for ESP8266 and MAX7219 or dotmatrix. The drawer in the lid fits to the WeMos D1 Mini ESP8266 module. Close the lid with two M2.5 bolts…
- Downloads
- 525
- Likes
- 51
- Rating
- 4
P
PrintablesMecky1963
Board for development with Arduino Uno, RPi4B, ESP8266 Nodemcu, Wemos D1 Mini
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
- Downloads
- 514
- Likes
- 96
- Rating
- 5
P
PrintablesF5PGT
ESP8266 node MCU V3 Case
ESP8266 node MCU V3 Case from AZ-Delivery
- Downloads
- 506
- Likes
- 31
- Rating
- 4.67
P
PrintablesHendrik Söbbing
Terminal for SSD1106 1.3'' OLED and NodeMCU v3 ESP8266, without soldering
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
- Downloads
- 483
- Likes
- 47
- Rating
- 0
P
PrintablesLuBi Tech
Esp 8266 Oled Case
A simple enclosure for Esp8266 board with 0.96 zoll oled display. Nedeed parts: four M2 screws wit the length 4 or 6 mm four inserts M2 inserts with 3.5 diameter and 3.5 mm height Print tips: no support needed print the lid with the top…
- Downloads
- 479
- Likes
- 27
- Rating
- 0
P
PrintablesPredy
ESP8266
If you want to support my work, just buy me a coffee: paypal.me/predypavlovic Case for ESP8266 MINI D1 dev board No screws required Ventilation openings Can be mounted without unplugging the circuit board Includes housing with and without…
- Downloads
- 449
- Likes
- 60
- Rating
- 5
P
PrintablesNeo Tron
Case for Wemos Lolin D1 mini v4 ESP8266
This is my case for the Wemos Lolin D1 mini v4 ESP8266. Please note that only the Wemos D1 Mini v4 fits in this case. This is my first CAD construction ever so feel free to make improvement solutions. Special credits go to my neighbour LS…
- Downloads
- 447
- Likes
- 26
- Rating
- 4
P
Printablesdafinger
ESP8266 Wemos D1 Mini V3 Case
Print the two parts of the case without support and snap them together.
- Downloads
- 447
- Likes
- 43
- Rating
- 4.6
P
PrintablesAlvomane
Radar Presence Sensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board | Radar Präsenzsensor HLK-LD2450 + Wemos D1 Mini V4 ESP8266 Board
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
- Downloads
- 438
- Likes
- 50
- Rating
- 0
P
Printablessixi
LED Matrix 16x16 - ESP8266 / Arduino - NeoPixel / WS2812b
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
- Downloads
- 438
- Likes
- 86
- Rating
- 5
P
PrintablesMorten R
NodeMCU ESP8266 Enclosure
Enclosure for a NodeMCU ESP8266 development board. The model fits boards with measurements being roughtly 26X49mm. The model is designed so that 5 Wagu 221 connectors can be mounted for connecting the LED-strip through a hole en one end…
- Downloads
- 416
- Likes
- 109
- Rating
- 0
P
PrintablesSimonEngel
Small ESP8266 WEMOS D1 Mini Case
Small snap fit case for the D1 mini footprint of the ESP8266. Reset button still accessible The small gap next to the USB connector can be used for routing cables to connect to external sensors Prints without supports
- Downloads
- 396
- Likes
- 42
- Rating
- 5
P
PrintablesFozi
Simple Mount or Case for Wemos D1 mini / ESP8266
I needed an option to mount the Wemos d1 mini module of my OctoPrint-Monitor to my enclose and made this simple mount/case. It holds the module tight (but not too tight to aviod damage of the module), so it can't slip out. To insert the…
- Downloads
- 390
- Likes
- 34
- Rating
- 4.75
P
PrintablesMakerMeik
Gas meter - Receive magnetic pulses with an ESP8266
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
- Downloads
- 386
- Likes
- 22
- Rating
- 0
P
PrintablesDaniel
1.3in OLED Screen & ESP8266 case
1.3in OLED Screen case with ESP8266, used as stock ticker.
- Downloads
- 380
- Likes
- 41
- Rating
- 5
P
PrintablesLucasfrit
Esp8266 Case
The small one is for the esp without the pins, and the tall one is for the esp with the pins.
- Downloads
- 378
- Likes
- 30
- Rating
- 4
P
Printablesrolf_prusa_printer
Housing Display TFT ILI9341 320X240 (ESP32 /ESP8266)
Gehäuse für ein ILI9341 TFT 320X240 Display Das Gehäusedeckel wird nur aufgesteckt. Das Display wird unter der Kappe mit 4Stück M3 X max.10mm Schrauben festgehalten. Das Gehäuse bietet genügend Platz um darin einen ECP32 oder D1-Mini etc.…
- Downloads
- 377
- Likes
- 25
- Rating
- 0
P
PrintablesHalit
NodeMcu_V3 ESP8266 Double Relay Case2
Rafts: No Supports: Yes Infill: 20%
- Downloads
- 366
- Likes
- 31
- Rating
- 5
P
PrintablesF14V
ESP8266 WeMos D1 Mini Slim Case
UPDATE: Added a "Rugged" version with clips (pretty flimsy, take care) for an increased holding strength. A very slim case for the WeMos D1 Mini DISCLAIMER: I've designed this case to fit my WeMos board with very small tolerances. I hope…
- Downloads
- 354
- Likes
- 56
- Rating
- 5
P
PrintablesWill
Customisable Module Socket for ESP8266 HC-05 etc
I've tried to make a customizable socket to fit any module you are trying to Program such as the ESP8266 wifi module or a HC-05 bluetooth module. Prity much any module that is based on being a board to be surface mounted. The open SCAD…
- Downloads
- 352
- Likes
- 40
- Rating
- 4
P
PrintablesQrome
3D Printer Monitor for OctoPrint Wemos D1 ESP8266
This is a station box designed for the Wemos D1 Mini and the standard 0.96" 128x64 OLED display. Get creative with Arduino code or load some of the awesome Wemos applications out there. The Wemos D1 mini will slide in and is held in place…
- Downloads
- 338
- Likes
- 59
- Rating
- 5
P
PrintablesNovator
IoT ESP8266 MAX7219 DISPLAY clock and informer BEST and simplest case ever
This is simple and easy to assembly case for MAX7912 and ESP8266 informer. It looks minimalistic and nice. V2 update (26.02.2021): Added version with display grid. It looks much better. Front part of the case is universal for both…
- Downloads
- 319
- Likes
- 35
- Rating
- 5
P
PrintablesAkio
Futuristic ESP8266 development case with Wagos
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
- Downloads
- 315
- Likes
- 712
- Rating
- 0
P
PrintablesPhantom
LD2410C + ESP32 or ESP8266
Human presence sensor housing, could not find any casing for the older ESP 8266, this is my first design so, feedback are welcomed Printed with a 0.2 resolution. Use 4 wall layers if to avoid infills on the lid. Screws needed: 2x 25mm M3…
- Downloads
- 313
- Likes
- 44
- Rating
- 4.5
P
PrintablesCarsam
Enclosure / Case for ESP8266 / NodeMCU / ESP12-F
Case / Enclosure for an ESP8266 / NodeMCU / ESP12-F Key Features: Accessible USB Port Prints without supports space for 3-5 wires no screws required, just click it together I'm using it for WLED Projects.
- Downloads
- 301
- Likes
- 29
- Rating
- 0
P
PrintablesQrome
ESP8266 Wemos Clock News Weather Scrolling Marquee
I have been working on this project since November 2017 and have been enjoying it so much that it is time to share it. Features include: Accurate Clock refresh off Internet Time Servers Local Weather and conditions (refreshed every 10 -…
- Downloads
- 300
- Likes
- 115
- Rating
- 4.82
P
Printablese_namics
ESP8266 - NodeMCU V3 - Case
This is a case for the NodeMCU V3 - ESP8266 (e.g. for AZ-Delivery ESP8266 NodeMCU Lolin V3 ) esp8266_case_box v5 : added two holes to mount box with screws on a plate (e.g. with 2xM2). I hope you like the model! → Makes and Comments are…
- Downloads
- 296
- Likes
- 17
- Rating
- 5
P
Printablesfroetz
D1 Mini DIN Rail Clip - ESP32 and ESP8266 version
I used the base of netzlasts Shelly1 DIN Rail Clip and designed two clips, one for the normal Wemos D1 Mini and one for the ESP32 D1 Mini, which is a bit wider because of the additional I/Os. Category: DIY
- Downloads
- 289
- Likes
- 13
- Rating
- 0
P
PrintablesForrest
WiFi Climate Sensor Enclosure for ESP32 (or ESP8266) and DHT22 (or DHT11)
This little enclosure will hold an ESP32 and DHT22 snugly, for wifi climate monitoring in a nice small package. I recommend the vented, direct soldered lid. Even with the vents, if you use this without deep sleep or lower power mode, THE…
- Downloads
- 276
- Likes
- 15
- Rating
- 4
P
PrintablesJiri Dobry
seven segment LED clock (ESP8266 + WS2812b)
Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…
- Downloads
- 268
- Likes
- 132
- Rating
- 5
P
PrintablesEvanRLD
Wireless Tally Light - DIY with ESP8266
Hi there ! This is a tally light model designed by my own, the goal was to give each camera operator an indication if he is on air, or in preview by the control room. This is a project I made for my video production association “La…
- Downloads
- 260
- Likes
- 44
- Rating
- 5
P
PrintablesPresswerk65
Case for NodeMCU ESP8266 V3 + RS232 to TTL Breakout Board
The lid snaps in, just screws for mounting the electronics required
- Downloads
- 255
- Likes
- 20
- Rating
- 0
P
PrintablesDanielH
D1 Mini ESP8266 Snap-fit case
A case for a Wemos / MAKERSHOP.DE D1 Mini ESP8266 WLAN board. Additional features on the side to add your own additional covers. Size: 32mm x 41.2mm x 28mm. UPDATE: Added a a case_top for D1 without headers. Added TopCover as an example…
- Downloads
- 255
- Likes
- 28
- Rating
- 4.83
P
PrintablesGary Yao
LD2420 Case | ESP8266 D1mini | 24Ghz human body micro motion sensing detection radar sensor
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
- Downloads
- 255
- Likes
- 17
- Rating
- 0
P
Printablesfly
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip
IKEA VINDRIKTNING ESP8266 Wemos D1 Clip to fix an ESP to get the dust values from the device via WLAN. PLA - no supports - 100% infill
- Downloads
- 251
- Likes
- 38
- Rating
- 4.83
P
PrintablesHijinx
Meanwell LRS-100-5 + ESP8266 Enclosure for WLED Neopixel Strips
This is an enclosure designed to fit closely to a Meanwell LRS-100-5 power supply, and to house a NodeMCU Base PCB. My objective was to have a neat, all-in-one enclosure for all I need to run the excellent WLED "Neopixel" addressable LED…
- Downloads
- 251
- Likes
- 59
- Rating
- 5
P
PrintablesLorenz H
Case for ESP8266 NodeMCU and BMP180/BMP280
This is my remix of the Sensor Node Enclosure for ESP8266 by calvinboey on Thingiverse . I changed it in order to fit an ESP8266 and a BMP180, so I made it smaller and closed nearly all openings. Other sensors should also fit in the box,…
- Downloads
- 240
- Likes
- 29
- Rating
- 4.5
P
PrintablesRemy
Enclosure for ESP8266 Development Board NodeMCU V3
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
- Downloads
- 236
- Likes
- 19
- Rating
- 5
P
PrintablesPlatypus1987
ESP8266 NodeMCU Case
Case for an ESP8266 NodeMCU with micro-usb connector. Press-fits together. If it is too lose, apply a drop of glue.
- Downloads
- 232
- Likes
- 20
- Rating
- 5
P
Printablesjwitting
ESP8266 Enclosure
I printed the enclosure by jperson(on thingiverse) thinking it would fit my ESP8266/NodeMCU board but it was apparently designed for a different, larger dev board. The holes for the pins fit perfectly though and I liked the form factor a…
- Downloads
- 229
- Likes
- 21
- Rating
- 0
P
PrintablesElectricDodo
Geiger Counter Enclosure (CAJOE RadiationD v1.1 with optional ESP8266)
An enclosure for the CAJOE RadiationD v1.1 geiger counter, with space for an ESP8266 for integration with home assistant through ESPHome. Works just fine without the ESP8266 as well. The lid has little notches to press-fit into place.…
- Downloads
- 225
- Likes
- 21
- Rating
- 5
P
PrintablesFeroc
Case for NodeMCU V3.2 Arduino ESP8266
I've designed this case for the NodeMCU V3.2 Arduino ESP8266 (Lolin/Wemos), with a bit of space for a sensor. Print Settings Rafts: Doesn't Matter Supports: No Category: Electronics
- Downloads
- 225
- Likes
- 13
- Rating
- 0
P
Printableskeyglitch
Adafruit Feather ESP8266 / ESP32 cases
These cases are compatible with the following Feather boards: Adafruit Feather HUZZAH with ESP8266 WiFi: https://www.adafruit.com/product/2821 Adafruit HUZZAH32 – ESP32 Feather Board: https://www.adafruit.com/product/3405 Feather ESP8266…
- Downloads
- 225
- Likes
- 12
- Rating
- 0
P
PrintablesSnowHead
Hollow Clock Remix uses Internet Time with ESP8266
I was excited by the design and solutions of shiuras hollow clocks . But all of them are running with only quartz accuracy and needs permanent correctures. So I used an ESP8266 NodeMCU to obtain the time from internet and added a…
- Downloads
- 220
- Likes
- 46
- Rating
- 5
P
PrintablesDrFate09
mmWave - ESP8266 D1 Mini - Presence Sensor Case
Enclosure made for the mmWave presence sensor featured in Everything Smart Home video: Components include: Wemos D1 Mini mmWave sensor Remixed from models created by jevis on Thingiverse: https://www.thingiverse.com/thing:5353636 Printed…
- Downloads
- 216
- Likes
- 23
- Rating
- 0
P
Printablesxshadows
ESP8266 + BME280 enclosure
Design a simple enclosure for my ESP8266 + BME280 temperature, humidity and pressure sensor with micro USB space for pow
- Downloads
- 215
- Likes
- 23
- Rating
- 0
P
PrintablesManuel Lesser
Smarthome Sensor ESPHome 8266 Temp, Humidity, Light, Air pressure
My Smarthome Roomsensor Parts: Wemos D1 mini BME 280 BH1750 M3x6mm Screw I Use Home Assistant as Server and ESPHome to control the Sensor I send the Wemos into deepsleep and wake it every 5min for 30sec (dont forget to connect D0 and RST)…
- Downloads
- 211
- Likes
- 60
- Rating
- 5
P
PrintablesStéphane RATELET
The Ultimate 3D printed case for LED Ring and D1mini ESP8266
A fully 3D printed enclosure to create a progress circle and alert notifier using a WS2812B 16 LED ring and ESP8266 D1mini. Using WLED firmware enable WiFi control, accessible through the WLED app or your home automation software, such as…
- Downloads
- 209
- Likes
- 58
- Rating
- 5
P
PrintablesSoftware2
Small project box for LOL1n - ESP8266 (NodeMCU Lolin V3)
This is a tiny box to hold a wide NodeMCU board. The box is tall enough that you can cram a few select parts underneath the board. There's a cutout for the (ugh) micro-USB port, and a hole to stick a 3mm LED out, or run some wires…
- Downloads
- 207
- Likes
- 7
- Rating
- 0
P
Printablesmartinwoodward
Octolamp - GitHub inspired wifi powered smart esp8266 lamp / sign
A 3D printable, GitHub infused, wifi enabled smart light powered by WLED and compatible with Home Assistant For full assembly and wiring instructions see https://github.com/martinwoodward/octolamp Revised Jun 26 2023: Added holes in black…
- Downloads
- 198
- Likes
- 106
- Rating
- 4.88
P
PrintablesJukkaT
Case for ESP8266 D1 mini and 1.77" TFT
Like the summary says, a really simple (wall-mount) case for ESP8266 D1 mini and a 1.77 inch display. Depending on your printer, you might have to adjust the print size. Actually, I found the print to be quite tight with our Mk3s, so…
- Downloads
- 196
- Likes
- 24
- Rating
- 5
P
Printablesguigui_la_moutarde
Housing for pixelit with wemos D1 mini ESP 8266
Housing for pixelit with wemos D1 mini ESP 8266 Infill: 20% Nozzle: 0.4mm Quality: 0.2mm --------------------------------------------------------------------------------------------------------- Print the front part in white and when the…
- Downloads
- 195
- Likes
- 10
- Rating
- 0
P
PrintablesNightHawk
ESP8266 Node Mcu Print in Place Case
I was fiddling around with fully printable hinges and created this design for a project. There is a small gap of 0.2mm between the top and bottom parts. After printing you may need to carefully crack possible connections between both…
- Downloads
- 194
- Likes
- 28
- Rating
- 5
P
Printablesmarcel293
ESP8266 D1 Mini snap fit case with Power Jack
This is a remix of the case by Lorenz Nimmervoll. Thanks to him! My changes: snap fit case ventilation in cover fixation of the Power Jack simplyfing inside for less supports/material only one hole for cables
- Downloads
- 190
- Likes
- 32
- Rating
- 5
P
PrintablesAgar
NodeMCU 1.0 ESP-12E/-12F case (ESP8266, Wemos D1)
Designed this case for my NodeMCU 1.0 ESP-12F ESP8266 board. Ordered a bunch of those from AliExpress (e.g. https://www.aliexpress.com/item/1005001621705950.html ) and needed a case to fit them. Case provides access at the front side to…
- Downloads
- 188
- Likes
- 7
- Rating
- 0
P
Printablesr0st
WS2812b digital pixel clock ESP8266 (ESPHome based)
The clock is based on WS22812b addressable LED strip and WEMOS-D1 mini (ESP-12F) board. In my case it is running the ESPHome software in combination with Home Assistant (see link below). Fusion 360 files are also available. To get result…
- Downloads
- 186
- Likes
- 73
- Rating
- 0
P
Printablesgskbyte
Case for ESP 8266 (ESP 01S) + relay
This is a case that can be used as a base for different enclosures for a simple relay combined with a ESP01 (see link at the end). Easy to customize using SketchUp 1.5mm walls Cover fits the enclosure precisely. 2mm extra on the side of…
- Downloads
- 180
- Likes
- 13
- Rating
- 0
P
PrintablesNobody3D
MAX7219 LED Matrix + ESP8266 case
This is a case for two 4 x MAX7219 LED Matrix modules and a wemos d1 mini. You might break a few clips when inserting the LED modules, but there are enough, so it should not matter :) Print Settings Printer Brand: Creality Printer: Ender…
- Downloads
- 180
- Likes
- 26
- Rating
- 0
P
PrintablesJens Friedrich
(Enhanced) Filament dry box - heated, ventilated, Arduino or ESP8266 controlled
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The…
- Downloads
- 178
- Likes
- 66
- Rating
- 0
P
Printablesdemek
NodeMCU ESP8266 V3 DIN Enclosure
Simple, well fitted enclosure for NodeMCU. Designed to fit Voron DIN rail clip. https://github.com/VoronDesign/Voron-2/blob/Voron2.4/STLs/Electronics_Bay/pcb_din_clip_x3.stl To assembly you need 4xm3x16mm screws, 4xm3 nuts, 2xm2x10mm self…
- Downloads
- 178
- Likes
- 24
- Rating
- 5
P
PrintablesHands on Katie
Simple case for ESP 8266 powering WLED ring array
Part of this guide: https://handsonkatie.com/breathing-life-into-ornaments-the-smart-led-dragon/
- Downloads
- 178
- Likes
- 33
- Rating
- 5
P
Printables0000
D1 Mini ESP8266 enclosure
Here you have my enclosure for WeMos D1 Mini ESP8266 board. All pins, USB port and reset button are easily accesible. Also pin labels are visible. Print it from PETG
- Downloads
- 171
- Likes
- 19
- Rating
- 5
P
PrintablesWolfgang
esp8266 translucent case
A practical translucent case for the popular esp8266 microcontroller. USB power outlet is kept free. Print instructions Best print with PLA natural for shining through leds. Read more about useful 3D Print life hacks in my ebook:…
- Downloads
- 170
- Likes
- 13
- Rating
- 3
P
PrintablesKarl
ESP8266 NodeMcu V3 box/case
This is my attempt at creating an enclosed box for the ESP Development Board 8266 for my LED projects. I wanted to house the board its self along with wago connectors that I have all in one place looking neat and tidy. Wagos are great,…
- Downloads
- 169
- Likes
- 16
- Rating
- 5
P
PrintablesTravmac
ElectroCookie Prototype Board Case (ESP8266 WLED Project)
Case project for an ElectroCookie Prototyping board and barrel plug for small electronics projects. The case halves are held together using four #4-40x1/2inch machine screws. The holes are just large enough for the screws to tap into the…
- Downloads
- 169
- Likes
- 24
- Rating
- 0
P
Printablesthenullray
ESP8266 Deauther case for 0.96" OLED
This is a case I made for the ESP8266 Deauther kit. It is inspired by the 1.3 inch Deauther Case . I used pretty much the same parts as in that build, though I did add an Adafruit Powerboost 1000c because I like the charging…
- Downloads
- 169
- Likes
- 24
- Rating
- 0
P
PrintablesWHerzog
NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display. The backplate is supplied in three differnt versions: With hole for a DHT22 Temperature/Humidity Sensor With mounting points for Adafruit Breakout…
- Downloads
- 166
- Likes
- 21
- Rating
- 4
P
PrintablesTadeas Tehan
WeMos D1 Mini ESP8266 solder holder
Holder for soldering pin headers to WeMos D1 Mini. The holder can be used with three different pin headers:
- Downloads
- 163
- Likes
- 31
- Rating
- 5
P
PrintablesLuBi Tech
![Esp82660.96 zoll oled display enclosure [NO SCREWS NEEDED]](https://media.printables.com/media/prints/748218/images/5840809_6a6a55cc-bd7c-4971-b081-23436b732f0d_a2ee043d-b6e5-4dfc-a045-9590e5eb49c2/20240202_173054.jpg)
Esp82660.96 zoll oled display enclosure [NO SCREWS NEEDED]
A simple enclosure for Esp8266 board with 0.96 zoll oled display. Nedeed parts: only a 3D FSM printer :) Print tips: no support needed print the lid with the top laying on the print bed the lid sits tight. Don't hesitate to use some force…
- Downloads
- 163
- Likes
- 11
- Rating
- 5
P
PrintablesQrome
Pi-hole Monitor Wemos D1 ESP8266
Pi-hole Monitor is a Wemos D1 Mini (ESP8266) with an I2C OLED display that is managed through a web interface and sits on your local network and will display statistics from your Pi-hole server. This is a station box designed for the…
- Downloads
- 162
- Likes
- 45
- Rating
- 4.67
P
Printableshoeni
Snap together ferraris sensor (Amica NodeMCU ESP8266, TCRT5000)
These are the enclosures I designed for the DIY-Sensor for a Ferraris wheel power counter with an Amica NodeMCU ESP8266. You can read details on the setup and build and get the software at…
- Downloads
- 162
- Likes
- 8
- Rating
- 5
P
PrintablesFlyingphoenix
Housing Display 3.2 inch TFT LCD Display Module ILI9341 320X240 (ESP32 /ESP8266)
Housing Display 3.2 inch TFT LCD Display Module ILI9341 320X240 (ESP32 /ESP8266)
- Downloads
- 161
- Likes
- 11
- Rating
- 0
P
Printablesder Bärtige
Gridfinity Wemos D1 Mini ESP32 ESP8266
Gridfinity container for storing Wemos D1 mini boards.
- Downloads
- 159
- Likes
- 40
- Rating
- 5
P
PrintablesHino Tony
Project box for 1604 LCD display and ESP8266 D1 module
This box can house a 1604 LCD (16x4 matrix) and a ESP8266 D1 module There are two holes that can be used to mount control buttons - i mounted them on a small piece of breadboard. The rear panel attaches using self tapping screws 1604 and…
- Downloads
- 158
- Likes
- 7
- Rating
- 0
P
PrintablesUraniumBottle
Esp 8266 deauther (oled) housing
Please upload makes so i can improve the model! You need 10x m2 brass inserts and 4x m2,5 brass inserts to assemlbe the housing. Screws are also needed. You can see dimensions of the parts that i used in the pictures. The charging board…
- Downloads
- 157
- Likes
- 17
- Rating
- 0
P
PrintablesPeyu
Volvo XC90 Folding Seat Latch Release Handle (Rear, 39826799; 39826801)
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
- Downloads
- 156
- Likes
- 8
- Rating
- 0
P
PrintablesMoxL
Octoprint monitor weather station esp8266 D1 mini ssd1306 bme280 case
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
- Downloads
- 156
- Likes
- 24
- Rating
- 4
P
PrintablesGekkoscamp
IKEA SKADIS - Dremel 8260 Flex shaft-mount
Holds the Dremel 8260 and the Dremel 100/160 Accessories set. It can be mounted to the IKEA SKADIS. Complete remodell since OG creator gave only .stl. Design inspired by OG modell V1: - Fits now the Dremel 8260 instead of 3000 - 4 round…
- Downloads
- 154
- Likes
- 28
- Rating
- 0