Counting matching models…
Are you tired of just handing over a gift card? Make them earn every penny with the "Bolted Shut" Gift Card Trap! This is a heavy-duty prank holder designed to lock a standard gift card behind 20 separate M6 bolts . For an extra layer of…
This is yet another filament holder, but one meant to be bolted onto 20x20 extrusion or the 20mm side of 20x40 extrusion. It's very similar to my TEVO Tornado / 20x20 filament holder that clicks into place instead of using a bolt: (…
Are you tired of just handing over a gift card? Make them earn every penny with the "Bolted Shut" Gift Card Trap! This is a heavy-duty prank holder designed to lock a standard gift card behind 20 separate M6 bolts . For an extra layer of…
⚠ Works with 3mm panels only! ⚠ M3 nut preloading needed! Please check the → GitHub page ← for more information about this design before printing. If you appreciate my designs and would like to support my work, you can do so by buying me…
This ergonomic foregrip prints well without supports and clamps securely to the firearm without cracking. Slide it onto a STANAG 4694* rail, then use two 6-32 x 1.25" socket-head screws and two nuts to clamp it down. In the photos, this…
This is yet another filament holder, but one meant to be bolted onto 20x20 extrusion or the 20mm side of 20x40 extrusion. It's very similar to my TEVO Tornado / 20x20 filament holder that clicks into place instead of using a bolt: (…
Mount your TV to the side of your bed (I live at MSU); it works with most beds with a square hole. For the future might design one that slides over the top and can be moved. For printing, print with the TV back on your build plate and…
Mount your TV to the side of your bed (I live at MSU); it works with most beds with a square hole. For the future might design one that slides over the top and can be moved. For printing, print with the TV back on your build plate and…
Hello everyone i Made this model so when you also only have PLA like me you can still move the spool to the side. It could also be that that breaking only happened to me but then still if you have the same problem then you don't have to…
read front locking instructions as described in Makita LXT Battery Holder for Multiboard - T-bolt locked rear locking instruction (same as i posted in comment in Multiboard - Makita Battery Holder ): you can use a 10 mm Mid Thread, Flat…
This was an attempt at remixing the Bolt Action pen from Tactile Turn. Features standard papermate inkjoy internals (Pen cartridge and spring). If printing I have modified m3 screws to utilize, however I had difficulties printing these at…
This is a corner bracket for bolting together box panels with 1/4" bolts. Great for materials that are too thin or fragile to screw or nail into from the thin side. They are made to be aesthetically pleasing as they were designed for use…
I have edited the CAD files to size the parts correctly. There's around 2mm tolerance now, means 1mm either end. You will still need to print dimensionally accurate. Also, I've made the holes larger for the heat inserts as they were very…
This model was quickly designed to organize the included tools for the Adventurer 5m (not pro). The 4mm mounting holes are placed 83mm apart on center. The model is designed to be mounted with M4 screws to the front right of the machine…
I used #9 x 3in wood screws. This gives a bit less that 1/2in of thread contact. I recommend using the included drill guide with a 1/8in (3.2mm) drill bit to make pilot holes. I've included step files for modification. You can also edit…
The original Horizontal Edge pieces don't fit on Prusa MK4S and similar beds so I've split them into multiple pieces with dovetail slots for connecting them. I suggest laying the connected pieces on a flat surface and using superglue to…
This is a remix of mklements Lab Rax 10" server rack - bolted version. Whenever I installed new equipment into the rack, I got annoyed of the M6 bolts always getting pushed all the way through and falling to the bottom. So I designed this…
Lab Rax Modified 5U Bolted Post rounded corner like in original
This is a 6u version of the Lab Rax project by mklements . It has been easily labled for easy and no confusion printing. All you need to complete this 6U rack is: Metric; M6x12mm Button Head Screws (16 Required For Frame + Additional For…
I needed to add a PTFE guide to my Voron 2.4 build an I came across the one from @Alia5_155893. However, compared to the initial design, I wanted: - The guide to be screwed to the bearing - The ability to install the tube support without…
Modified filament guide clip for use with M5 flat head screw. Requires to cut M5 threads in the extrusion piece. note: original arm can be found here https://www.thingiverse.com/thing:2917932 Print Settings Printer Brand: Creality…
Was inspired by another slim wallet, but i didn't like how flimsy it felt at the time and how hard it was the print as one piece so decided to make my own version couple years back, and used itever since Now want to share it cause of the…
You can find my prints and creations for sale here: www.etsy.com/shop/HugoCraft I remixed my original 40mm fan plate that was designed to be use with 5mm self tapping screws to use 3mm bevel headed bolts which are secured by nuts that sit…
I suggest keeping the threads printing at 0.2mm on both the nut and bolts. other sections of the model can be printed with 0.3 layer height. I also removed the bottom layers and used a brim to limit the warping on the model base. There…
https://www.patreon.com/posts/32946176 https://www.patreon.com/posts/33242583
I made this model for educational purposes. Mainly, just to show how a container with multiple holes for nuts and bolts can be 3D printed without any support. The original idea was to make a water tight container but the water actually…
One of the things I enjoy about 3d printing is fixing broken stuff which may either be unavailable or expensive. Recently i found the cap on the bolted trap screw for the stormwater pipe shattered to the point that I only had a shard…
Easy to print durable doorstop in the form of a cut Bolt. Material : ABS PLA Print speed Fast 0.2 Infill : 20%
My daughter came to me to print a shield according to dimension of a sample she did in cardboard. Here it is. As I have a Prusa mini+, I had to split it in 4. In the FreeCAD file you will see that part *2_of_4* and *4_of_4* are…
Thank you Tomek for your idea to bolt bridge! I used this to modify another ukulele
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a great jigsaw holder - attaches firmly to Multiboard and fits my Dewalt 334 perfectly. May fit others - let me know if you…
Toolholders designed to bolt tools in a metal 40x40mm frame and allow clearance for a frontal door.
Bolt together case for the PineTime Dev kit Needs 4x M2x10mm cap screws with 4x M2 hex nuts I designed this for resin printing, might work with FDM, though I haven't tried. The button is accessible and fits almost flush with the case,…
You probably need supports, i recomend to print it on ABS, but if you are going to pour concrete on it it may not change that much The hollow one its 2mm shorter but both are for 60mm post
