Counting matching models…
Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to…
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Both the jar itself and the lid were printed in Spiral Vase Mode. This model was designed to be printed with a 0.4mm nozzle. Completed Jar Dimensions: 110mm Diameter Short Jar 98mm Height (With Lid) Tall Jar 170mm Height (With Lid) If…
Has both the V1 and V2 Knomi. Post your makes for a chance to get featured!
This is a quick a dirty version of the Honeycomb Wall PS5 Controller Mount. Got a hold of a Dualsense Edge controller and wanted to make a new mount that would allow owners of these controllers to still use the Honeycomb wall. Works with…
Adapted original bin to use organic supports and mirrored it, so both sides of the printer get a bin in one print.
Update - January 2025 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Dog poop bag holder for Flexi leash I made…
This is a way to allow printing using a filament while it is still in a drybox. Just drill a 1/2in (~13mm) hole in the drybox and put this in it. There is a version for both the M6 and M10 PTFE push fitings.
Combine sheets of Nasa Chainmail without needing fiddly middle print joining. Links hold together well, especially on the FDM-optimised form. Use the base connector for combining sheets of the original model and the sturdy connector for…
This model is compatible with the lego system.
This is an enhanced version of the great model H0 Train Station Platform, Bahnsteig Eisenbahnstation 1:87 by SJM (https://www.printables.com/model/1044055-h0-train-station-platform-bahn). I converted it into a both sided train station…
My wife wanted a mason jar fruit fly trap, so I made this. I made it for both wide mouth and regular mouth jars, both quart and half pint jars. Make a simple but powerful fruit fly trap by putting a small amount of apple cider vinegar in…
Update - January 2026 I have uploaded a new version of the main body that is slightly stronger at the base (non-lid end). The lid is unchanged, so all lids are fully compatible with all bodies. Carabiner mount dog poop bag holder This is…
This is an insert / organizer for burncycle, all of its released expansions (as of December 2023), and the Brassmag Volumes 1 and 2. It all fits in the core box, has no lid lift, supports vertical storage, and was designed to aid setup…
The original model only had the right crocs, so I changed the models to include the right one too, so you wont have to walk with 2 right feet, or fingers.
AKA “Hidden Belts Mod” AKA "LR3 Superstrut-encased Y belts" New v2 for LowRider v4: NEW as of October 6, 2023: now either or both Y belts can be hidden. Initially I only hid the Y-max belt (non-rail side) as that's the one I really needed…
Warning: This piece is not stock. It has special dimensions, it needs an adjustment of the selector stop positions, in the MMU2S firmware. Is this moment I use: "MMU2S-TZB 3.0.3" firmware by TheZeroBeast Link:…
The sound damping feet can be found here on the US Amazon: 1.25" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive (4, 50 Duro) https://a.co/d/fzzKBZe Make sure to read the weight class suggestions from the manufacturer,…
Printer feet should: Not wobble, be firmly connected to the frame, and support the printer Isolate and eliminate vibrations to improve print quality Dampen noise caused by those vibrations to improve quality of life In addition, if you…
Summary: This spool holder component is for Prusa MK2, MK3, and MK4 printers. This spool holder is compatible with the default provided injection molded spool holder from Prusa, and matches the same aesthetic. The 1kg version of this…
Remixed Afrokid's Multipass Card Holder ( https://www.thingiverse.com/thing:1134909 ) to have the same styling on both sides. Printed it Thursday, 1/12/23! Literally about 2 hours of carefully removing the supports and then stabbing the…
Needed a version that would work for both versions of the AMS that I have. One has 3 slots, the other had 5.
I decided to add the convenience of slicing the text and setting to a 2nd filament as well as adding text embedded in the underside.
As shown and discussed in this video: As described in the video, attached are both printable files and editable SketchUp files. This content was previously exclusively for supporters on Patreon, but I did not care for the Patreon business…
Gundam Stand 1/144 both peg and box style , requires support
This model is compatible with the lego system.
Overview The insert for Parks is regarded as one of the best examples of excellent insert design (and deservedly so!), but it quickly becomes unusable if you sleeve your cards or own either/both of the expansions. If you remove the insert…
A simple helper tool to aid with pouring concrete or plaster into the famous Open Ball base
Celebrate your love for the Star Wars universe with this iconic Both Factions badge inspired by the acclaimed Star Wars™: The Old Republic and the popular mobile game Star Wars™: Galaxy of Heroes. 🌌 Iconic Design: This badge features the…
I added a 3-tool verison of Kyu_u's orginal model. I also included a 3-tool model with the mount facing the other directions which works better for some m12 tools. The “Inner” is the taller part of the battery is closer to the wall. The…
This is an organizer for the boardgame Clank in Space. It fits the base game, the Apocalypse expansion, and the Cyber Station 11 expansion. The design works with sleeved cards (I used perfect fit penny sleeves, if you are using premium…
I did a quick remix of 3D Printy Print-in-Place Twisty Puzzle - Christmas Tree to have both simple and difficult versions of the Xmas case. This is the latest version of each puzzle. This is not the full print in place puzzle, you will…
This is a simple remix of guppyk's 5.00mm starter strips . I duplicated the model and combined them back-to-back so that the cells are on both sides of the strip. The extra thickness allows these to be printed standing up. These slipped…
Since there is never enough space for various small things and tools for the printer, I decided to modify the already remixed Prusa MK4 Toolbox model from author S3BR4 , which I liked the most, to be used on the left side. While I was in…
This is a design imspired by the feet designed by Via_the_Verrazzano . I liked the design but really didnt like how the feet in no way mounted to the printer, but the printer just rested ontop of them. This is designed from scratch but…
New phone, new case designs! I've included four designs: Two flexible designs, one solid and one with a hex pattern, and two rigid designs. The rigid versions are designed for a secure snap fit around the corners, while still being…
These are effective vibration damper and noise reducer feet for any 3D printer using 3030 extruded aluminum beams as the frame, like the Prusa i3 MK3S. This was inspired by Plaidbear's design . My reasons for making my own design: I…
This is a remix from my design of the Pusi Negotiator , but redesigned to fit the Sworksdesign Bottomless Dripper . Also included is a file for the Glass version of the Bottomless Dripper . Note on nomenclature: Pusi (푸시) is the Korean…
Wrist brace - Arm Cast - Orthosis - Rounded both sides Category: Other
UPDATE 2026/07/02: Consider this instead: I find the original a bit tight/tough to dispense all cards in the stack, also there's not enough space to identify and pick a card. My solution, dispense half the stack on one side. I have to…
Info: original z-axis-top holder (right side) with: 2 SD cards holder slots given part is compatible with MK3, MK3S, MK3S+ no collision with Z-axis possibility for left and right side Print instructions: as recommended for original parts:…
The Historical Chess Set Series #4 - English Rowbotham Chess Set We can trace the origins of the design for the Rowbotham chess set back to the mid-19th century when the Reverend Rowbotham commissioned it from John Jaques of London.…
Replacing the hotend on your Elegoo Centauri Carbon or CC2 means wrestling two tiny JST connectors — the thermistor and ceramic heater — back into their ports blind, one at a time, in a cramped space. It's fiddly, it's frustrating, and…
Same mechanism and assembly as all other hands, only with the blue hand added. I will be actively working on the purple and omni-hand models from now on, but feel free to contact me! :)
Warning A multi-color management tool is required. The yellow parts are not included. You must purchase the 3D SETS model 7. The configuration in the slicer must allow the added elements to be printed in place of the original object for…
This model is compatible with the lego system.
Key Features: Prusa Mini & Bambu Lab A1 Mini both Build plate Available!! <040126> adds shape modification. 1. Modified Heat Bed Top Cover : The original top cover of the Prusa Mini heat bed has been adjusted to accommodate the unique…
3D Printed using PLA. Layer height 0.2mm and 15% infill Came out great on both PRUSA i3 Mk3S and Ender 3 Pro The two printed parts can be fitted together straight from the printer. It is a tight fit and no glue is required.
This is a Remix of my USB cable organizer meant to be wall mounted. This version is designed to support both normal sized and also thinner USB cables (in different slots), with holes that are 4mm wide and some that are 5mm wide. Similar…
This model is compatible with the lego system.
This model is compatible with the lego system.
Warning The yellow parts are not included. You must purchase the 3D SETS models 7 and 8. Definition This kit provides several options, allowing for 28 different combinations (see pictures). Front fender options: Chrome sidestep (without 0…
I bought the Zimaboard 2 after I was happy with my Zimaboard 1 and wanted it mounted to my rack. Most of the design I found was only for a 10inch rack and not 19inch so why not try it myself. I was happy with my base design so I tried so…
The design by marfyk was great, so they get full credit here. The design was made to print one side down, and, therefore, flat on one side. I just mirrored that side and merged the two sides for full effect. This necessitates printing it…
I’ve always liked the look of the D3vil Wears Prada printer feet, so I redesigned them to fit the Elegoo Centauri Carbon, with added compatibility for Sorbothane anti-vibration pads. If you’ve never heard of Sorbothane, it’s one of the…
Designed two display stands, one with the jedi emblem and one with the empire's. Made to accept the same bottom plate, allowing for an LED strip to be mounted inside, lighting up the emblem and the lightsaber from below. If using a…
UPDATE 10/12/2021: Walls are made smaller and the Small parts box has a larger side for the board te rest on. For the game Harry Potter Hogwarts Battle and the two expansions: Monsters Box of Monsters and Charms and Potions I was…
These are guides that slips on the end of a Stihl chain saw file to give you something to hold on to and also provide a reference for holding the file at the correct angle for either a chain that requires 25 degree or 30 degree…
I loved both designs that this was remixed from for different reasons - the round ones were clean, but they overlapped the spaces. The square ones fit the spaces, but didn't look as nice to me So... I combined them both... Category: Games
This model is compatible with the lego system.
Made for honeycomb storage wall. This design is 1 wide and 2 units tall. It tiles nicely in both directions and is designed as a small bit holding solution. The shelves/boxes fit into the outer box at a 5 degree angle so they won't…
8-18 Update the heat dissipation fan bracket to magnetic fixing, provide 2 4010 fans or 4 2507 fan brackets. 1、The top side has a cooling fan and uses 2 4010 cooling fans 2、The top side does not use the cooling fan, and directly prints 2…
Included both the 1kg (2.2lb) and 2.3kg (5lb) filament roll models that I use to wall mount almost all of my filament spool rolls. I've printed these in both PLA & PETG and would recommend PETG though it's just a personal preference due…
The GraviTrax "Catch" insert that comes with GraviTrax starter sets does not work well. It has a flat section at the exit, and marbles often stall on this section. It is unbelievable that Ravensburger did not design the Catch insert with…
This model is compatible with the lego system.
A modified CW2 body that takes both sensors, but uses a PC4-M6 BSP connector
This quil is designed in Fusion 360 and printed on Průša mini+. The quil is printed in 2 parts that can be assembled together. First part, the Quil Nib is a bit tricky and it must be printed with layer height of 0,05mm. It took me less…
These are all the standard curved sections of track and are compatible with Brio, and most brands of wooden trains. I have also included a one half standard size (22.5 degrees) of the tighter radius curve. All pieces print without…
Remix by https://www.thingiverse.com/thing:4688873 for both side hand Category: Art Tools
The idea was shamelessly stolen from https://www.printables.com/model/240252-ultimate-printer-knob-upgrade-the-best-knob-of-bot but written from the ground up in SCAD, and only has been tested for the MK4. Prints with no supports. I used…
1-4 Washers.3mf contains full set of metric and SAE washers for smaller shaft twist nuts for ¼" drive sockets. 3-8 Washers.3mf contains full set of metric and SAE washers for larger shaft twist nuts for 3/8" and ½" sockets plus there are…
The complete set of Stemfie3D slotted symmetric braces. get.stemfie.org x.com/stemfie3d
Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…
size EU 36 for the fury inside you can buy it from Walmart :…
Edit2: Added a new file that actually works. You may need to play with the spacing between the prongs that insert into the printer to get a tighter fit. I used some double sided tape to get them to stay stuck. This is a remix of…
Pattern for those of you who want to be able to adapt your own spool rollers to a Prusa spool holder bayonet mount. It fits. It works. It doesn't block the other holder on the other side. December 10 update - finished the female component…
I downloaded the model by 1cheeseball1 and noticed that it only had “Rod Stoppers” on one side, so I remixed it with Tinkercard to be uniform on both sides. Prints great @0.16mm with regular PLA.
I used PETG to print for additional stability and I suggest you do the same. I imagine with PLA the ridges might wear off too fast. Depending on how often you plan to adjust, you might get away with it, tho
These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…
This is a remix of the enclosure feet created by Prusa to allow use for either the 1 inch or 1.25 inch sorbothane hemisphere feet. I found the rubber feet underwhelming. I use sorbothane for the printer itself and it has almost completely…
Hi Internet Virtual Driving Fans! As requested, a upload of the 3 hole mounting version of the original 70mm Thrustmaster hub adaptor. Whats in the pack? It comes with the pointy end UP and DOWN direction.... AND also with nut side or…
Compatible with RC3 windshield. More constant wall thicknesses, less holes, less extrusion start/stop and idle movements. Reduced weight of upper part. More flexible shield bar - easier assembly. Print instructions Upper part prints OK…
Bambu AntiVibration Foot This is another Bambu Labs X1 Carbon foot I made in Fusion 360. I made this to be able to screw the foot directly to the printer with a M3x35 screw and washer. It has a removable support for the screw hole. I am…
If you’ve ever set up Sid Meier’s Civilization (2010) with all expansions, you know the struggle: tons of components, long setup time, and chaos in the box. This insert is designed to fix exactly that. It keeps everything well organized,…
This insert fits all three Oriflamme games (the original, Ablaze and Alliance). You need 2 card boxes, and 1 one of each other model. You won't be able to store all the influence tokens, but you will never need all of them either. Stack…
DESIGNED USING TPU. Other filaments may require adjustment A pair of STL’s for single and double magazine pouches for the SIG P938 and for Kimber Micro 9 and other compact 8 round, single stack, 9mm magazines. FYI, the Kimber 8 round mag…
Put a hole in to be able to punch out the Magsafe if you want. Extended the shaft to allow for vertical mounting of iPhone Ran the cable cutout all the way down and through the base Added a hole to insert a piece of filament to hold the…
This is a simple remix of Gurtmail's, just adding in the option for the cap to be horizontal or vertically mounted. No supports needed. Note that the rotated versions compromises one of the stems inserts to get as close as possible to…
This is a custom-designed insert for Light Speed Arena with one primary goal: to allow the components from the Black Hole and Glyphon expansions to fit perfectly alongside the core game contents within the original box. If you want to…
Insert for Paper Tales along with the two expansions Beyond the Gate and Ce qui forge les légendes. Supports sleeved cards (tested with Gamegenic Standard). For convenience, I have also uploaded a version that has been cut up for printing…
Remodeled the 1.25" feet insert by @ToddFischer_601780 to have 1.5" diameter for use with X1-Carbon combo with AMS on top of the printer (which increases the weight to be outside the rating for smaller diameter feet at 50 durometer…
Remixed original model to account for a slightly wider sorbothane pad. Used DUR 70 1.5" sorbothane pads. Printed in PETG, but can be printed in PLA or other. Included bambu 3MF with my settings.
Maat, in ancient Egyptian religion, the personification of truth, justice, and the cosmic order. The daughter of the sun
keychain lego style heart. Perfect gift for you and your love with your initials. Check out my other models. braloki dla pary w stylu lego z inicjałami. Sprawdź inne moje modele.
For dampening noises from vibrations, print four of these. Stick one Sorbothane damper under each. Fits nicely under each foot. https://www.amazon.com/dp/B00516DL5Y?psc=1&ref=ppx_yo2ov_dt_b_product_details I bought mine from Amazon.
I wasn't happy with the artifacts the original feet were adding to my input shaping measurements, so I ordered some Sorbothane isolation pads as replacement. This print is for a small holder that captures the pads. You'll need: Sorbothane…
Desktop/Office/workshop organisers Thease are a few simple yet usefull desktop organisers that help you store things like pens, plyers, sticky notes and maybe even tooth brushes. Note: Thease take a long time to print Due to their height…
This insert is designed to hold all of blood rage, all the content from both the first and second kickstarter. It is a remix of NoGameNoCesco's insert with two redesigned monster trays. This holds everything (almost) you need to play the…
BOX-ESP32-EVB is plastic box which can be used with both ESP32-EVB with the internal PCB antenna and ESP32-EVB-EA with external antenna.
![[improved] Flexi Leash Dog Poop Bag Holder - Compact and Lightweight - Stores both Clean and Used bags - Poop bag roll dispenser storage inside and loop hook for full waste dog poo bags outside classic lead](https://media.printables.com/media/prints/1065815/images/8064434_3fb5692b-4c50-4329-b99a-209ed14d3893_52f5bdd9-190f-4f3f-bd91-414c9d94cc4b/04.jpg)
![Wobble Biscuit - "Rod Stopper" on both sides [Remix]](https://media.printables.com/media/prints/493035/images/4018605_49e8df4b-da66-4794-a5fc-40ac7b40e17b/67d98c25-a4fd-4181-8ab1-f145762fde8e.jpg)
