Counting matching models…
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
Case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The board I designed it off of is ~ 66.28mm wide x 63.3mm long and the PCB is 1.5mm thick. I made the following updates…
*PRINT AT 120% SCALE BECAUSE I AM BAD AT CAD * Filament breakout sensor. Uses a rolling limit switch to detect when there is no tension on the filament being produced indicating a breakout. I intend to use this to sound an audible alarm.…
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
After going through the surgery of opening my G5AR and attaching the tiny IPX connectors to provide external antenna access, I was a little worried about a mishap where an antenna cable got pulled with sufficient force to disconnect them…
I designed these jigs to help align pins made from tinned copper leads and solder them at a consistent length. This is intended for those breakout boards that convert SMT to DIP for breadboards. Recommended to print out of polycarbonate…
The original insert for this game barely fits the contents of the game as they come. It definitely does not allow for sleeved cards. This insert will allow for sleeved cards with a lot of extra space. If you do NOT sleeve your cards, they…
I designed this to work with "whiteeeen 4pcs USB Type C Breakout Board Red with Male Pin Header 2 CC" USB-C breakout boards to avoid shorting out the pins. These PCBs appear to be a clone of the "SparkFun USB-C Breakout - Horizontal" PCBs…
I love this system and I really like working with a breakout board, so I created a module that allows you to use your breakout board with this system.
Same as my previous remix but with the addition of a 1.28" round gauge mount. Now you can design gauges anywhere!
USB Type-C Female Breakout Board Mount / Holder This is a sleek and minimalist mount designed for a popular 4-pin USB Type-C female breakout board (V, D-, D+, G). If you are tired of messy holes in your DIY project enclosures, this holder…
Based on @Esoterical_306854 's JST splitter . Exactly the same assembly, but I would advise against using hot snot to hold the carrier in. Super glue will do, since it will stick the carrier to the housing (it doesn't work well on the…
Image is a reference I used to design the part. Coin is a US quarter Link to onshape model A friend of mine asked me to design a keyturn for his mom's Harley as the OEM keyturn had rattled itself loose and was lost on the road. I used an…
This is a little breakout board board for the XY stepper motors to help with the ease of maintenance. It is to prevent the rerouting of cables through the rear drag chain of your Voron 24 printer when your having to change the stepper…
This is a remix of the original openscad implementation for Arduino Nano -- https://www.printables.com/model/118444-parametric-breakout-board-sockets-esp8266-nodemcu- This is a breakout board that I use for storing Pico boards, soldering,…
The cheap DCF77 module you can get have bad solder pads for attaching pins and you will probably rip of the antenna cable while handling this module. That's why I created a thingy that keeps both in place and you can use it as module in…
This is a mounting plate for the KeyStudio Raspberry Pi Breakout Board. I have included three types or configurations of this plate. “base_plate_with_mounting_holes.stl” This Plate has four tabs to screw, bolt or glue to another surface.…
A simple case, for a simple breakout board This ESP32 breakout board on Aliexpress : https://es.aliexpress.com/item/1005004476867346.html (Color: Adapter 38P) Onshape CAD link:…
These DollaTek GPIO boards from Amazon are cheap and practical, but 2 mounting holes are completely useless. My solution is mounting it to the sub-plate with 2 clips. It holds the board very well.
Enclosure to intercept the Variax RJ45 signals. One is for the guitar, the second RJ45 is to connect to a helix or POD xt to provide the power and AES. Cutting a midi cable in half and making one an IN and the other an OUT allows…
This is a simple, compact and sturdy box for making breakouts for Ethercon. Specifically made for Neutrik NE8FDV YK . I've printed the main body on it's face (connector side) and the lid on it's back so that the two pieces complement each…
This design is for the esp32 dev microcontroller and a breakout board. It may need to be scaled to fit your particular breakout board.
Breakout box for four DMX signal lanes from Cat-cable. This box is specifically designed for DMX (no shielding, only outputs) with 3 pin and 5 pin per signal lane. All locking hinges are flat to housing outlines. For assembly you need 8…
This is inspired by Gridfinity Generic DevBoard Holder . I didn't need the half grid base, which slows printing time, and the tallest bin there is 3 Gridfinity units, which doesn't work for boards that have stacking headers, or breakout…
Enclosure for ESP32 breakout board. It features a hole at one end for a USB cable and slits either side for wire access to the srew terminals of the breakout board. Print in PETG 100% infill Supports enabled 0.2mm height 0.4mm nozzle
This is a dummy 18650 battery with banana jacks for charging other 1s lipos. You need: two small screws two 4mm banana jacks some copper wire Both screws serve as battery contact. You may have to cut the banana jack soldering connections…
This is a simple mount for a PSVR (1) break out box. I printed it in PLA using regular settings, 20% infill, flat side down with supports. There's no screw holes since I used double-sided tape to mount
I made a pretty simple shell for a RusEFI 64-pin 176122 connector breakout (v0.3) . I'm using this with a Toyota Camry, but I believe this may also be compatible with the Miata and Hondas. This really is just to keep it from shorting out…
DE-9 (commonly referred to as DB-9) Breakout box to banana jacks. Includes two DE-9 connector holes (intended for in and out), and 9 banana jacks. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: Yes, for…
There are multiple holder files for Nebula cameras scattered around, but what if you don't have a Nebula camera? This breakout model can turn it into a tripod mount with built in positioning. Print Settings: Any infill percentage in any…
Remixed PI top case with a hole that accommodates a 'Breakout PI+' prototyping board from here: https://www.abelectronics.co.uk/p/59/breakout-pi-plus (I quite like this board, it has reduced a rats nest of jumpers plus breadboard to…
A sliding case for this micro USB breakout board: https://www.amazon.ca/gp/product/B07KS1RPMP/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The model is somewhat parametric so you might be able to adjust for your needs, but this was…
This is a snap-fit case for the Adafruit 1.8 Color TFT LCD Display with MicroSD Card Breakout, ST7735R. This case is designed to be snap-fit together, not requiring any screws. Please check to see if this fits your display before printing…
I picked up an off-brand ethercon connector and found that it won't fit most models becuase there's a short PCB sticking off the end. I extended this model to fit the additional size and added support for m3 heat inserts for mounting the…
This is a Din Rail mount for a KEYESTUDIO Pico breakout board. The board can be used with Raspberry Pi Pico Versions one and two. You will need to print one tab for this design. It can be found at https://www.thingiverse.com/thing:3401942…
Every time I build a little electronics project, I hate how the components usually just rattle around in the case. So I designed this customizeable solution in OpenSCAD that lets me configure the number of pins, the sizing and spacing,…
Power Breakout adapter for Power-it ni-cd batteries
The "Bob BOB" is an Open Source Standard that uses 2.54mm IDC connectors to allow for Arduino Based (or otherwise) modules to be easily interchanged. Instructions and files here! GitHub page here including free and open source circuit…
Designed this part to mount a small breakout PCB I designed
This is a box to house a ESP32 on a breakout board and a relay. I am using this to house my garage door control for home assistant. See pics for the ESP32 and relay I used. Designed in Fusion360. Files included I revised and add the…
Case with a snap-fit lid to fit a 30 pin ESP32 breakout board, you'll find these all over aliexpress/ebay/amazon, etc. The board I designed it off of is ~ 66.28mm wide x 63.3mm long and the PCB is 1.5mm thick. I made the following updates…
Thanks to @Surfalex2000 for giving me permission to share some of these parts that I modified to install my version of the "JTAG Breakout Board Adapter Converter" ;).
This is a case for the RJ-45 BrewPi Sensor Breakout PCB . This case makes it easy to mount the PCB somewhere convenient - between your BrewPi-ESP controller and your fermentation fridge. This case is designed to be printed in two parts -…
This basic battery breakout is designed to clip to Triton XT/X-Tech cordless tools' 18V battery, to be able to attach your own devices. Can also be used as foundation componant to make your own cordless devices. Designed to use standard…
This LoRa radio chassis is designed for the RAKwireless WisBlock 19007 with RAK 4631 Core. This model is challenging and rewarding- most configurations require soldering, general electrical knowledge, firmware flashing, etc. Tolerances on…
Case for Watterot BME 280 Breakout Board https://shop.watterott.com/BME280-Breakout-humidity-pressure-temperature-sensor
Modified breakout boards for the Ender NG 1.2 to mount 4 and 5 pin JST-XH connectors and XT30s on your toolhead
While building some WLED picture frames with my daughter, I came up with the idea of using USB-C connectors ( link ) instead of traditional barrel jacks. This offers a more modern and versatile power option. To install the connector,…
For mounting the breakout box for my HTC Vive Pro inside of a Thermaltake Core Case P3 computer case (https://www.thermaltake.com/products/chassis.html?cat=190). Update - I've created a 2.0 version. The new version has a circular cut out…
See: https://github.com/feffe81/fpv-cockpit-controller
Custom backplate for the E3S1P Breakout Board Extruder, available on Tindie: https://www.tindie.com/products/ccc/e3s1p-breakout-board-extruder/ Print in a temperature-resistant material. Use supports unless you choose the version with…
Snugly mount a Mini-B breakout PCB with room to solder 90 degree header pins. Specs for the breakout PCB: Hole to hole: 16 mm PCB size: 20 mm x 18 mm approx Use 6 mm M3 bolts and nuts to fasten PCB to the print. Print Settings Printer…
This is a simple protective base for your Freenove ESP32-S3 Breakout Board v1.1: Protect the exposed pins from stray metal objects on the workbench that could let out the magic smoke Protect your table surface from scratches caused by…
*PRINT AT 120% SCALE BECAUSE I AM BAD AT CAD * Filament breakout sensor. Uses a rolling limit switch to detect when there is no tension on the filament being produced indicating a breakout. I intend to use this to sound an audible alarm.…
Cable Support to prevent bending or breaking the USB-C Port on the Breakout Box. To avoid getting a loose contact.
The inexpensive and convenient 'Nano Expansion Prototype Board' provides Dupont headers for all pins of the Arduino Nano. Conveniently, all pins are flanged with 5-volt supply voltage, making it easy to connect sensors to the digital…
This is a toolhead accessory cable mount and breakout the includes a configuration designed for using a BLTouch sensor. This is what I believe is the most common setup when converting an Ender 3 into an Ender 3 NG v1.2 (including me), but…
Allows you to connect your antenna feed line to your antenna without cutting up coax. You will need a SO-239 bulkhead connector, a couple 3mm screws with nuts and washers, also a small ring terminal to connect your shield wire to one of…
This ePaper Breakout Board is designed for SeeedStudio XIAO series boards for allowing you driving ePaper display seamlessly. It also comes with a 8-pin 2.54 header for supporting additional microcontroll connections. Supporting plug and…
Seeed Studio CAN-Bus Breakout Board is an expansion board compatible with all XIAO development boards. The integration of the MCP2515 controller and SN65HVD230 transceiver chips on the expansion board ensures seamless and efficient…
The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485…
This insert is designed to store all of Lockup and its expansion Breakout in the main box along with the promos and acrylic tiles. It is meant to be thematic, featuring barred windows, doors, library shelves, crates, and break and cave…
The Hat provides a user-friendly interface for connection various sensors, modules, and peripherals to the Raspberry Pi, streamlining prototyping and projects development.
This is a simple, sturdy wall mount designed to hold a standard fibre termination box securely in place. I originally designed it to mount onto a wooden slat acoustic panel, but it can be adapted for many other mounting surfaces. In my…
This is a toolhead accessory cable mount and breakout the includes a configuration designed for using a Klicky sensor. I included connectors for every toolhead accessory, including the extruder and hot end heater. The hot end heaters can…
ESP32 Freenove Breakout V5 Caddy Tray This caddy/tray has been designed to protect the Freenove Breakout V5 board. The board is fixed to the caddy with 4x M3x5 screws. Printed on 0.2mm PLA, no need for supports. 4x silicone self adhesive…
Case for a HDMI breakout board. I use it to connect to DDC/CI. Needs 4 M2*8 Screws and M2 heat-set inserts.
After seeing the SillyPilot, I knew I wanted the emotional response of its satisfying break action and auto ejection, but I also wanted the fantastic priming feel of the Pilot's predecessor, the Knockout - which happened to be the only…
Pyco ESP-01 Breakout Board Case A simple protective case designed for the ESP-01 Breakout Board. It includes a dedicated hole for a small button, allowing you to easily set the ESP-01 into boot mode (by connecting GPIO0 → GND). ⚠ Note:…
This is a case for the USB to LPT converter STB4100 for the chinese milling Routers CNC30x0 with parallel Input. Print Settings Printer: FIashForge Dreamer Rafts: No Supports: No Resolution: 0.20 mm Infill: 100% Filament: PLA silver…
a simple base for an ATX breakout to protect the bottom from shorting out on metal. breakout board measures 87x52mm, with screwhole spacing 78.75 x 43.75 M3 heat inserts; 4.3mm hole. I've used AIEX M3 inserts; 6mm tall, 4.6mm wide but i'd…
Overview This is a printable box designed to hold one of the sensor breakout boards I designed for my ESP ports of the BrewPi firmware. This box contains the sensor breakout PCB (with attached sensors) allowing you to place the sensors…
A JST breakout has been added to the model to facilitate the connection of the part cooling fans. Use spacers from original model.
The new baby breakout board case is here! This fits an atomic pi and requires 3 M3x30 machine screws. The case requires no supports and prints in about 5 hours. This is a very snug fit and all ports are accessible. Enjoy! If you need this…
This is an enclosure for a bench power supply utilizing an ATX power supply from a PC as its power source, based on the project here . The basic idea is you build this box, then connect a spare ATX power supply to it, and voila, you have…
This is for the Dell 2000W PSU sold by Parallel Miner , as well as the X15B breakout board . https://imgur.com/gallery/cryocooler-updates-SIDikbz#auUK7t6 https://imgur.com/gallery/cryocooler-updates-SIDikbz#AqTOqvX
PCB mount compatible with a selection of breakout boards, whether they are running GP2040-CE or are from Brook. Two versions are available, with or without brass threaded inserts. Flat underside for foam pads. There is also an adaptor for…
Got a lot of things to power on a rack but don't want to use a lot of wall warts? I know I did, so I decided to do something cool! In my rack I have an ITX motherboard running Ubuntu and a 6 drive RAID. I am not even using 200 of my 600…
A small box for the Sparkfun FT232R breakout board, useful when you need just the Tx and Rx lines. Printed in transparent PETG, so the lights are still visible. Make sure your board fits, as the box is quite tight. The OpenSCAD source…
A breakout to install 4mm jacks to the front panel of the Keithley 2600 SMU. The used jacks are Hirschmann 4mm jacks. Backside connector is: Phoenix IC2.5/8-STF-5.08 PN:1825378
I like using the Wemos D1 ESP8266 microcontroller together with ESPHome to integrate sensors into my Home Assistant setup. For this project, I wanted a way to attach a BME280 temperature and humidity sensor breakout board to a 16 mm tent…
This is an add-on for Till Harbaum's TX-Pi system ( https://github.com/harbaum/tx-pi ). An I2C breakout case to be installed inbetween Raspberry and display. The clips in the top cover are intended to accomodate the I2C level shifter and…
Sovol SV04 Mount for Creality Sprite Extruders (Standard and Pro) — for those who don’t want to use (or dont have) the breakout board (like me). Printed in ASA. The original extruder on my SV04 broke, and since replacement parts are no…
Description I had a few spare PSUs sitting around and was looking for an easy way to turn them into benchtop powerstations when I ran across brotherchris’s and saltkunmazbeige’s designs. They were awesome and inspiring so I started to…
Use this instead of the normal Left panel (or mirror to use it on the right). I'm using M5x10 bolts but could fit longer.
The Behringer Neutron semi-modular synth can be mounted as a Eurorack module, but you lose the breakout panel that includes MIDI thru, USB, and power connector. I didn't want to lose those connections so I gutted the electronics and…
Breakout box for 4 channels of amplified audio using two NL4 connectors and two 4-conductor push terminals. I have two stereo speaker pairs, both bi-amped, so this is useful for those connections while having the amp tucked away. The back…
Remixed version of the @Adafruit Snap Fit Case for Feather RP2040 Scorpio for their FT232H Breakout . Modified to fit the smaller FT232H breakout and added options for no mounting tabs on bottom and embossed name. Removed mounting holes…
This is a simple case for an ESP32 Expansion/Breakout Board. Not so much a case as a guard for the bottom of the board so you don't worry about the contacts on the bottom touching things. It is designed for the ESP32S 38P/V4/Goouuu…
Just be aware that in order to use the XH-M229 breakout board in this enclosure if will require some de-soldering and re-soldering of the switch and power indicator diode in order to mirror the mounting of the board. However, this then…
This case is for an ESP32 sitting on a breakout board. Many ventilation slots, additionally under the USB connection a slot for ribbon cable. Hole grid of the board 58x60mm. The screw holes have a diameter of 2mm. Dieses Case ist für…
Couple of quick little box designs for cable breakouts from 25mm x 16mm cable ducting. Uses some m3 x 8mm screws and some m3 inserts.
Here's a video about how to wire these up: https://www.youtube.com/watch?v=gjI9GNob5Ss&t=19s Chassis is simple and easy to work with. It takes 3mm heated inserts. Here are some solderable ethercon connectors:…
Breakout board holder to mount in electronic box, i use mine for PrintNC CNC machine. More info below grblHAL is an open source gcode interpreter that runs on microcontrollers. It is a 32bit fork of the original open source grbl project,…
Once again more of a build log than a printable. Of the cases I've used for Raspberry Pi 3 or 4, the iUniker is one of my favorites but doesn't give easy access to the GPIO headers. After making due with it for a while I decided it was…
Needed a simple snap together case for a thermocouple breakout board for my kiln. Printed in ABS.
![Captain Bob Breakout Board System [The Bob BOB]](https://media.printables.com/media/prints/1206278/images/9060630_8980e224-bd75-4c52-912e-3428d05b8402_4ac03c9a-1db9-43c9-8a22-28ca99ab14dc/bob.png)
