Counting matching models…
I've designed this replacement for a Cookeo handle cover after the original one broke. I printed with support, and in ASA so it so it can withstand higher temps, and the dishwasher hopefully many times. The uploaded files don't have the…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for one variant
Print 5 pieces of slats out in PETG or higher temperature resistant material (there are 5 on the plate in the .stl) and clip them together. It should be pretty obvious how they go together. Look at the photos if you can't figure it out.…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Náhradní pant pro digestoř Mora OP 610W. Cooker fume hing for Mora OP 610W.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Happy Thanksgiving/Merry Christmas my friends! Just a fun little turkey kit for you all. Prints quick so get a production line going and hand them out to your friends and family! Not really much else to say about this one... it's cute I…
These are models that work as a replacement screw for the anova sous vide clamp that anova wants FOURTY UNITED STATES DOLLARS TO REPLACE. Luckily 3d printer owners can repair their own things right? There are 3 different models now, the…
This is a simple strainer for a ricecooker. I designed it, so you can wash the rice directly in the bowl and strain it perfectly, without having trouble of rice falling out, or not getting all the water out. My pot has a diameter of 14cm.…
If you are looking for the bracket that attaches the Anova to the water bath, see my companion design here: Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com The…
Toddlermix - this is a perfect toy for a kid that would like to cook together with the parent in their favorite multicooker. Can be also a fun gift to a person who dreams of newest Thermomix :) It was a big effort to design this replica…
Requested by a reddit member, modeled by me after a picture Category: Kitchen & Dining
Coal cooker (1930-1950) with a movable oven flap. A small paper clip is needed to hinge the oven door. scale 1:15 __________________________________________________________ Kohleherd oder Stangenherd (1930-1950) mit beweglicher…
This is the companion part for Sous Vide Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com but it will also fit the original bracket that comes with your Anova. I designed it so that you…
I lost my original measuring cup fro Xiaomi Rice Cooker one so I made a copy using my firend's PETG - recommended - due to food contact Feel free to modify and share - skechup file included
Redukce na digestoř ze 150 mm na 120 mm . Reducer For Cooker Hood Vent Ducting 150 mm To 120 mm Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
The center of gravity is slightly more in closed position, which means, the back valve can be fixed in vertical position. Can be installed in horizontal position as well. In vertical position, you may need to add some weight. I glued a…
Cooker ring for mud kitchen. Scale as needed. if the holes dont fit use the tools your slicer provides to adjust them or remove them. The inner part is seperate so you can print in other color. of course, no supports first layer - 0.2…
english On our Siemens egg boiler, which is over 20 years old, the egg support has practically disintegrated over time due to heat and lime exposure. I traced the part, which is no longer available as a spare part. In several development…
Please use high temp capable filament! I used CFSYS NexABS-GF25 QIDI Q2C https://psych0h3ad.link/QIDIQ2C (Affiliate)
Bought a Tiger rice cooker from Costco, didn't come with a rice spoon / paddle holder. What!?!? 30 minutes later in Tinkercad. Clips right on to handle and spoon neatly slots in. Removeable and infinitely printable. For this I used Elegoo…
Récupérateur eau Cookeo. Il rentre correctement (un tout petit peu en force). J'ai décidé de l'imprimer "debout" ça me semblais logique Je ne l'ai pas testé en condition réelle ! A vos risques et périls :p Pas certain que le PLA tienne…
Description I made this two models of parabolic solar cookers, one with 600mm diameter and one with 900mm diameter. However I only could properly test only the one with 600mm diameter, since I'm currently in the city were I work and don't…
Paddle holder. Simple replacement part for a rice cooker. Onshape: https://cad.onshape.com/documents/990c39e3b656cc9a1405262e/w/d6653f90a4c1f385688cb9b5/e/d2a46e1281792bf82275432e Filament: ABS Filament: https://amzn.to/4gpUqB6 If you…
Intro This measuring cup was designed as a sturdier and better alternative to the standard rice cup that comes with most rice cookers. Cups follow the Japanese Gō standard (1合 = 180 ml), which is different from the U.S. cup (236.6 ml or 8…
Lost the foot to my Ninja Slow Cooker. Decided to make replacements. Sorry it is on its side, I can't figure out how to get the model rotated the right way in Fusion 360. Category: Replacement Parts
handle for Tristar rice cooker lid Hardware: Original bolt Printed in ASA
A slow cooker knob to replace the original one that cracked. Printed using black PETG on MK3+. S
Ok, PHEW. This is a remix of a lot of things. My wife ran across a dragon head version of this (hi! Thank you! Awesome creation!) and we're... we're more Nintendo people, so after searching extensively for a model of Wario with his mouth…
this is a slightly lower and louder remix of another uploaded last month
Print on the side, in PETG and use double-sided tape (VHB or other) to mount it on the rice cooker. It might be easier to first coil up the cable and then fix the mount to the rice cooker so lengths match up. Works for rice cookers with a…
Replacement plain 8mm dia. D-shaft knobs for Kenwood CK 405 range cooker. I assume they would work for anything else with that spindle! FreeCAD file included in case you want to add numbers or symbols. I'm still working out how to do…
Remix of DTakehara excellent design to fit the newest model of the Anova Sous-vide cooker. Mine is a bit taller and has a cutaway for the pot clamp. Update: Added a version with my logo moved from the bottom to the top/rear of the stand…
A friend of mine broke two of the feet on her cooker when moving house, so asked me to remake them - they work wonderfully. (Sorry, can't remember what model the oven was but she said there was universal feet out there to buy so perhaps…
Print in ASA/ABS or another heat resistant plastic because I think it will reach over 60*C (so no PLA) The Ninja Foodi has a design flaw whereby the small plastic tab that activates the safety switch is easy to snap off. This fits over…
Print profiles: Nozzle =0.4mm 0.2 mm layer height infil = 15 speed = 50 (for ender printers) To create adorable Pikachu-shaped cookies using a Pikachu cookie cutter, follow these steps for a delightful result: Ingredients & Supplies:…
👉 Join Vault Access on Patreon: https://www.patreon.com/c/TheDuckVault/membership Vault Access gets you: ✅ The commercial license to print and sell all 400+ ducks, this one included ✅ 210+ exclusive ducks, all yours to download the moment…
If you have a gas cooker outside which is not always connected to the gas tank, you will eventually end up with a gas hose which accumulates dust and debris in your garage/storage. For this reason I designed a dust cap which allows you to…
There are two Parts, the Holder and the inlay. Print the holder with tree support. The inlay doesnt need support: The inlay can snap in into the holder. Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: Yes Resolution: 0.2…
Miniature pressure cooker with removable lid. The main part does not need supports, but the handles have a large overhang at the end, so you can choose whether you want to use supports or not but it turned out fairly well for me either…
Not much to say. Print it without supports, screw it to the wall. Done! Enjoy! OpenSCAD included as usual
I bought this cheap rice cooker off Amazon and was slightly annoyed that it didn't have a way to store the paddle. Not a big deal, but my last cooker has a small hole in the handle to store it, so I figured I'd add it myself. This handle…
Multicooker ladle created by combining a scan of a real ladle and a 3D model based on a photo, created using Trellis Ai.
I re-design a replacement knob for my Tatung multi cooker since the original one was broken. I am very happy with the outcome and I want to share with you guys if yours is broken or you want to get a more ergonomic one. Anyway, happy…
The spoon support for our rice cooker became brittle and broke after years of use. I modelled this replacement part to be stronger and larger to fit our various sized spoons. 0.4mm nozzle, 0.2mm layer, PETG, Sovol SV05
Indiana State shape cookie cutter. Prints cutting side up so looks backwards.
Printed in ABS with 100% infill
Made a replacement Spatula holder to fit larger diameter handle spatulas. Hooks into the existing slot on the Zojirushi Rice Cookers. Made specifically for the NP-NVC10 model, but I'm sure it is compatible with other models.
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) The OEM Crock Pot handles are made of thin polycarbonate that turns brittle and cracks over time.This is a durable replacement that should hold up…
Use cases : This is my creation of a lid block model for the Cookeo from Moulinex based on a cat model. This model allows the Cookeo to remain dry and avoid odors in the tank. Impression : PLA or PETG Please give this design a like if you…
I did it for change a broken cooker control knob
The original feet were accidentally melted off so I can't really do a side-by side comparison, but this design is the closest I could get to the original. The original mounting clip would've been weak and difficult to print, so I opted to…
The lock spare part for this multicooker.
This is a replacement lid for the RIVAL slower cooker. Will most likely fit most brands. You should use stainless steel nuts, bolt and washer. Updated the slow cooker handle replacement. Nothing like actual field testing. Wife says the…
The original filter from Boman is useless in my opinion. Since so much was saved with the activated carbon that odors are not really removed. Therefore, I have made my own filter, this can be filled with activated carbon itself. To do…
This is a replacement for the Cuisinart CRC-400 and CRC-800 rice cookers lid handle that is known to break easily. This part gets hot, so make sure you print with a plastic that can handle some heat like PETG, avoid PLA. Print…
I designed this to replace the light covers on an old cooker/hob fume extractor. It's a Philips branded extractor but seems to be pretty generic and these should fit Philips, Whirlpool, Elica, Bauknecht, Firenzi and Ignis. I've reinforced…
A simple push on know, very similar to original knob it replaces.
Latch of a friends cuckoo CHXB1010FS ricecooker broke off. Due to the covid-19 situation at the time they could not provide replacement parts. We created this replacement latch. There is one file for the complete latch and two for a…
Modelled on the broken one in my kitchen. Not sure what exact Zanussi model, but the D-shaft measures 6mm nominal diameter with depth of approx. 17mm. It's a comfortable press-fit, and deep enough to engage the igniters when pressed.…
I used PETG with a 0 .4mm nozzle and 0.3mm draft layer. I wanted speed, if you want quality then print smaller layers.
Inspired by the design of dkallback (https://www.thingiverse.com/thing:2755862), I tried to improve the design, because I encountered some issues with the original design. Printed with ABS, the printed flange was very brittle and the…
here is a simple cooked turkey cookie cutter I designed for my mom. Model can be scaled to any size!
Replacement knob for the Anova Precision Cooker. Print instructions Printed with 0.15mm layer height in PLA, but anything should work, really, as there are not too tight tolerances. Glued the knob, to keep a tight fit.
Replacement knobs for a GE slow cooker. I used a resin printer with black resin, and then filled in the indicator well with a bit of white resin and cured in place. You can also use white paint. Indicator on the knob (for pointing to each…
I use it to boil eggs in a pot with my induction stove with steam. Just fill in some water, make it boil. I think adding 1 minute to boiling time is appropriate. Doesn't melt the plastic because of the Leidenfrost phenomenon. When ready…
A replacement foot base for Rival crock pots / slow cookers. I recommend printing this on its side, as it will make the tabs a bit stronger and less likely to split, by changing the direction of the layer grain. Recommended infill : 25%…
A simple replacement ignition button designed for a Diplomat cooker but may be compatible with other brands of cookers.
Slow Cooker Handle Replacement / Upgrade Please print on it's side and then no supports will be required. IMPORTANT: Upon testing this design while cooking for 24 hours, the PETG print got soft enough for the Bolt to slide out. So, I…
I create my custom leg on platform for our freestand kitchen stove / cooker (thread shoud be same for brands AEG, Whirlpool, Electrolux) to reach same level with our kitchen desk (original leg isn't high enough). I duplicate thread from…
The button for the Buffalo Enco Rice Cooker - KW 63 was broken so this is a button that fits in the same spot and properly retains the lid to enable cooking. The button is slightly stiffer than the original, you can improve that by…
New handle for slow cooker with improve ergonomics and size. Must print out of higher temp material such as ABS, ASA or PETG.. I used PETG.
Recommend print settings Material: something a little more temperature tolerant like PETG or ABS (not PLA). Supports: enabled Variable layer height? I printed this with 0.3mm layers up until the clasp, reduced to minimum layer height to…
A vertical stand for the Anova Precision Cooker 3.0
Use cases : This is my creation of a lid block model for the Cookeo from Moulinex based on a cat model. This model allows the Cookeo to remain dry and avoid odors in the tank. Impression : PLA or PETG Please give this design a like if you…
I was not going to pay Anova a 4th of the price of a new cooker just for a tiny piece of plastic. Not an exact copy due to my lack of modeling experience. Can be printed without supports, it's bit steep, looks ugly, but it works. Feel…
Very good airtight valve for extractor hood, when the extractor hood is stopped it is locked with a neodymium magnet and a washer. I have made several and they work perfectly. BODY –---- PETG – ASA – ABS NUT ------ PETG – ASA – ABS…
The following print file represents a replacement part for the Krups F233 Ovomat egg cooker, specifically the egg tray. To ensure optimal printing results, it is recommended to use a temperature-insensitive filament like PAHT-CF It has a…
A few stencils and cooke cutter style stencils that are used to aid in cutting out Supergrips for the Zeromouse v34 This model should be able to be printed on any printer using standard settings. But I recommend 0.16mm layer hight. Link…
Multicooker spatula created by combining a scan of a real ladle and a 3D model based on a photo, created using Trellis Ai.
This is a combined rice and water measurement cup for use with a rice cooker Just fill the dry rice into the smaller side, the water into the bigger one to the same height, and you have the desired ratio. I prefer 1.3 water to 1 rice. The…
This is a drip tray for an electric rice cooker. It was designed as a replacement for the original tray, which broke. It fits tightly into the back. This model was printed with a layer height of 0.20 mm in PETG.
Poignées pour cuiseur SEB. Imprimé en PLA 100% de remplissage puis recuit pendant 45 min à 100 degrés pour augmenter la résistance à la chaleur. J'attends de voir le résultat dans la durée. A imprimer en ABS dans l'idéal. Print in PLA…
My Tatung rice cooker handle broke off years ago and I've been using it without. Finally got around to modeling a replacement handle. This handle should be printed from something high temp resistant. I printed mine from Nylon CF in…
A replacement knob for the Campingaz Lagoon gas cooker, which I use when camping. May also fit on other Campingaz models - I'm not sure. Included are both the original design (reverse engineered) and an FDM-friendly part which I suspect…
This is a mount for the original Anova Precision Cooker on the 12l and 16l Container. I did not like the original screwable bracket so I have designed this plug-in bracket. Print upside down so there is no need for support. I printed this…
After finding that the lid to my pressure cooker had fallen and broke the handle, I took it upon myself to design and 3D print a replacement. I included a STEP file so users may feel free to adjust this as their needs see fit. I printed…
Imported from Thingiverse (2020) Replacement knob for Magefesa classic pressure cookers, Star model. UPDATE: I printed this with PLA+ which has a heat distortion temperature of 52°C. Knob inner geometry deformed a bit after first use due…
This cute little cooked-shrimp is for pretend play kitchens/BBQs. Sized for safety but always monitor children while they are playing with 3D prints. No supports needed and have lots of fun! Filament used in photo- Polymaker Polylite Pink…
Cuisinart Pressure Cooker Condensation Collector Model EPC-1200PC Found one of these at a yard sale and it was missing the condensation collector. Yeah, you can buy one from Cuisinart I suppose but it didn't look right, so I whipped up…
I believe this should fit most appliances with a friction fit twist knob. Adjust the size of the key for best fit based on your printer and appliance.
Modeling made following a request and therefore for fun. Knowing that pressurized steam (+/-100°c) comes out at this place, I have a doubt about the durability of the plastic (especially PLA). Use at your own risk. Take care to lay the…
WMF Mini Rice Cooker Replacement KnobWMF Mini Rice Cooker Replacement Knob. Available in two variants: M6 threaded insert. M6 Nut embedding (add a print pause in your slicer when reaching the sacrificial layer covering the nut).
Replacement Cooker Extractor Hood Vent Cover This was my design to replace some broken cooker extractor hood vent covers. With angled louvres and printed in ABS for best thermal resistance, they came out looking great, much better than a…
This design is a cover for the Ikea exhaust pipe with a diameter of 150 mm: https://www.ikea.com/de/de/p/nyttig-tub-150-flexibles-abzugsrohr-fuer-geblaese-90250259/ Between the two parts you can add an extra filter membrane.
Mounting Flange, Aperture and Lensboard for Mutex Cooke knuckles 210mm F/3 portrait lens
This is a replacement knob for stove or cooker tops. This particular one was designed for a westinghouse gas stove top but may be compatible with others. Ensure you print it with support and I suggest a reasonable amount of infill (eg…
Like my work, shout me a coffee to fuel my next design here: https://ko-fi.com/gbombadon
Quick and easy fix for the Electrolux Cooking Hood filters little metal tabs to fix them in place. Just print as many as you need and push them in the hole until they click.
A simple model to replace the knob from a Morphy Richards branded slow cooker. I believe the spindle shape is common across many brands and types of appliances.
This is a replacement dew collector for the Tefal RK7 4-in-1 rice cooker. I have not yet printed this thing. Category: 3D Printing
