Counting matching models…
If you find this useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Retaining ring / nut for KitchenAid stand mixer attachment, Food Grinder (FGA-2). Depending on the tolerances of your printer, it may be…
Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant
I enjoy using my KINGrinder to manually grind my coffee beans for my morning cup of coffee, however shortly after I began using this particular manual coffee grinder, I discovered an apparent design flaw. An O-ring is used to keep the…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
I needed another cargo net hook to lift the net so it did not block me closing the swing gate on my Ecosport. Went searching and could only find ones for specific cars. I modeled this and printed it in PETG. No supports needed. You will…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
This battery retainer system allows your Nimh or Lipo batteries to fit properly in your Tamiya ORV chassis cars (Frog, Brat, Blackfoot, Monster Beetle, etc.) The side plates that come with the kits don't allow for the battery wires to…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Only driven a few metres and the first part is already missing and there is no replacement in the packaging? Then print one quickly :-) Needs some Support. As shown in the slicer screenshot.
Print approx. €0.18–€0.23 excl. taxPreliminary estimate for one variant
Our Dyson DC14 upright took a bit of a tumble and the cord retaining arm broke. This replacement part is a fairly easy print (there are supports) and an easy repair. Disassembly/Repair: Use a spudger (or sharp edge) to pop the gray center…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
A retaining bend for the drain hose of a washing machine or dishwasher. I needed one but had none at hand, so I designed my own. Why buy it when you can print it? Maybe it is of use for somebody 🙂 It's designed for 23mm drain hoses. There…
Print approx. €3.49–€4.26 excl. taxPreliminary estimate for PETGSource material: PET
A very simple and quick to print retaining clip for the screws on the peak of the new Arai Tour-X5, or Arai XD5. A single layer of PETG that prints in less than a minute.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
ADDENDUM : When I originally made these in Aug. 2022 I had some concerns that PETG might not hold up well in hot chlorinated water. As I write this in March 2024 I can report that that the prints still look as good as when I originally…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Note: I do not own a GRC, made this for a friend that owns a GRC. They confirmed the fit to work in their shifter set up.
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
My old gas canister needed a new lid, see. link: https://www.printables.com/cs/model/50790-new-petrol-canister-lid-m40x4/comments/287082 But also a circlip. Print settings: layer 0.10mm; 100% filling; PETG material
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Quarter Inch Quick Connect Fitting Retaining Clip
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is a small addition to the quick release for mask strap design. It hinges in place on the last spindle of the quick release design and closes to hold the straps of the mask tightly. I printed at 0.1mm layer height, four instances…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This Hex Key Case is ideal for a 3D printer tool kit. You just print the case and slide a piece of filament ( TPU is best then PETG otherwise you can use PLA) into the hole provided and your hex keys will stay put until you need them. It…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
I felt that the band retainer was a little too thick and pinched in to my wrist. Also, when printing in a less flexible material like PETG, the band retainer won't give enough to allow it to slip over the incoming strap. So I redesigned…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Replacement clip for holding glass into screen/security door. 4mm screw diameter Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: 100% Filament: Matterhackers ABS Black Notes: Used support from…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
I designed this hook for a radiator diameter of 26mm, scale up or down for best result. please use heat resistant materials like PETG, ABS or ASA radiators get hot. I recomend CarbonFiber PETG for it's sleak matt finish and temperature…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
A simple twist in piece that allows you to retain cables inside unistrut track, designed for theatre applications. Idea for studio theatres with embedded unistrut in the walls. Origional idea came form GSMD, this piece was designed of one…
Print approx. €6.46–€7.90 excl. taxPreliminary estimate for one variant
I re-contstructed a retainer bolt for securing the bottom tray in our waste container (brand: Kliko) because I was unable to find a replacement for the one that was broken. The design contains a 3D printed grommet (flexible filament) and…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
These seem to fall off while bashing, so I measured one that I haven't lost yet, so I can keep my cars running. I printed 4 instances at once using PETG, 0.2mm layer height, in the default orientation with 99 perimeters, using…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Arandela de seguridad generica, sin un fin especifico, en mi caso las use para sujetar una manija de alzacristales. Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4 Temperaturas: Nozzel 205ºC ,…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Motivation Anyone who's worked on bikes long enough has encountered the problem of trying to remove stubborn BB cups. Oftentimes, the problem comes down to tool engagement: the wrench or the socket isn't not held securely against the…
Print approx. €2.11–€2.58 excl. taxPreliminary estimate for one variant
The HUL Prisma CPAP machine has a set of two exchangeable filters sitting on the back of the device. Those filters are loosely placed in the filter frame and normally should stay there without a fixing mechanism. But my filters got blown…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
Just a friction-fit retention method for HongWay brand (and potentially others) wire clippers. Print in place.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
replacement hose retaining clip for inside the HozeLock 20/25/30m AutoReal so you don't have to spend £2 on a new original part should the existing one break or go missing I recommend printing it out of PETG to keep it a bit more springy…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Chair Bolt Retainer v2 (for 5/16-18 bolts with 1/2" head) Tired of bolts loosening up and legs becoming loose. If you have similar chairs you know what I mean. I would have safety wired the bolts if the heads were cross drilled. Instead I…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is an exact 3D-printed replica of the retaining ring used to hold the mosquito screen in place on a BEA30 ventilation grille. Designed from precise measurements, it fits perfectly as a replacement for the original part. The ring has…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Replacement part for Infiniti "push pin clips." Because I was unfamiliar with these clips and did not know how to remove them , I tore up several when removing the under-hood cowl when replacing my battery. So another chance to sketch…
A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…
**UPDATED:: 07/11/25 Attempted to add FF logo =). Loaded it as a .3mf since I added it in slicer. 07/04/25 Adjusted the fan muffler angle and depth for better fit to hot end Cut lateral piece thickness down for better clearance and…
Whether you process items in an Ecommerce setting or transfer items from one box to another or just want a box for your cat to play in these retainers will keep the box flaps out of your way! Print for one corner or all four, as many as…
A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…
This is a remix of the Voron 2.4 Bowden retainer that features an M10 thread at the back for a fitting that retains your PTFE tube . It's designed so that the fitting can be screwed into the back, and the tube pushed all the way through…
The filament tubes of the IFS can be too long and they push against the top glass plate, making noises, opening the enclosure. This part holds the glass in place. You can install it by simply press it into the holes on the top.
Don't print this in PLA to use on the enclosed (5M Pro) - mine got soft and came off when I was printing some ASA. So I'm going to print one in ASA and see how it goes. Update 04/05/2025 - it went well. I'm so tired of running all my…
This is the retaining clip for the fuel line on the fuel filter end off a 2015 Ford Ranger may suit other year models and makes. Print with 0.6mm line width
After trying some of the other options I'd seen online I wasn't particularly happy with the ergonomics of any of them and I definitely didn't like using bolts or dowels to make a simple hinge. So I sat down and taught myself enough Fusion…
The AD5X is a great machine but like any there are always little niggles which can be improved upon. The Bowden clip which retains the 4 in 1 filament feed tube is small and fiddly to remove. The model attached is longer and still fits…
Trim Removal Tool - Snap Rivet - Fastener - Retainer NEW VERSION Resize to adjust dimensions - If you download/enjoyed this file, please leave a like - Thx
A simple long hose retainer for better routing of the long hose on a long hose setup. Useful if you are using a long hose setup but the canister for your light is mounted on your back-gas tanks, the canister is to short to retain the long…
Retainer Case A retainer case that will stay closed in your bag and isn't too crazy for your pocket. STEP file included Parts Needed: Two M3x16 nuts and bolts:…
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.4 We have fully implemented the updated design, refined and cleaned up all geometries, and optimized every feature for reliable 3D printing. The result is a stronger, more…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The special feature is that the buckle can be mounted without having to cut the loop band. Due to the screw used as a retaining pin, the buckle…
This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors
The original design was great, but I have had problems with the cable not staying in the cable pathway. This remix adds a few extrusions to the cable path to help hold the cable in place. Category: Accessories
This version can be printed as is with no supports. I simply clipped off the bottom 2mm of the original file and uploaded it as a remix. This fits the CAP 1" chromed bars great. As a suggestion, it works fine on the CAP painted bars, but…
This two-part assembly snaps together and protects your retainers. The case is compact and portable for travel and will fit easily in any pocket. The push snap feature on the front keeps the case closed and the snap together hinge allows…
Need an easy to print good looking container that also fits in your bike's water bottle cage? Enter the Cagetainer ! Great to keep snacks, keys, money/cards, tools and more. In my use, I am able to easily fit a set of park tool tire…
I could not find a suitable retainer box that did not also require magnets or screws to assemble, so I designed a box that works without any additional materials. Can be clipped shut, and opened by applying a slight pressure to the front…
Invisalign retainer case that doesn't require any magnets or hinges and stays closed. Includes TPU thermoplastic liner to reduce bacteria build up and cleaning purposes. It can scale depending on your needs, dimensions are below.…
I was having an issue with the leadscrew pin vibrating out of place within the leadscrew block on my Pastamatic machine. This bracket keeps the pin in place within the block and slips easily out of the way in case you need to get to the…
I made this specific for the BC250 Micro-Fit connectors, as there was no way to lock them into place, and this also stops you from mixing them up, so you can connect all 6 pins on each without worry about crossing them over. I made this…
An alternative to expensive aluminum motor retainers and unsightly z-clips, this 38mm screw-on retainer is a great way to ensure your rocket motor is safely retained in the motor mount. Compatible with Aerotech, CTI, Loki, and most 38mm…
Made to replace the retainer box (a.k.a. pin box) on the bottom of my hoodie's zipper. Printed successfully on a Sovol SV06 with a 0.1 layer height. Note that it should be printed with the openings on top, so that you don't have to deal…
Clip Removal Tool - Snap Rivet - Fastener - Retainer REV.3 Resize to adjust dimensions All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed…
Made based on the measurements of my and my friend's clear retainers. I hope they are universal enough. Due to a request I made a version for two retainers.
Step File Included! Remix from: https://www.thingiverse.com/thing:4721582 i edited them so you can print them better in 50% size. i used them for my drawers and it works perfectly! Thanks OP! i Edited it for 3x16mm Screws Donate if you…
I took the inspiration and main design of @RAD3D 's great Dice Tray V2 and added the follow modifications: Shortened the height of the catch tray to make it easier to see the dice from sharper angles Added an inner lip to help make…
This is a dental retainer case intended to be printed in vase mode. The two pieces will hold together thanks to the rippled design.
This is a remix of TNS remix of droftarts thing Take care: This will only take effect if the pulleys diameter is lower than the bases diameter. The pink pulley in the first picture for example will be drawn in the conventional way. I…
Parametric Printable Clicky-Clack Seal This is a parametric FreeCad model to generate printable seal strips to replace the Misumi panel clamp ( HSCPF3H-B-2000 ) called for in the original clicky-clack door mod. The panel retainer can be…
This is a very simple little clamp to keep the spool from shifting down the spool holder arm. It is made with 4 perimeters, 4 top 4 bottom layers and 40 infill with abs... I think petg or even pla would work...
buy @Mauker a coffee ! https://ko-fi.com/A623L7G ☕ added versions with zero and one keystone. added version with vents also see my version with PoE adapter mount: https://www.printables.com/model/1215636
29mm Motor Retainer for Model rocketry. This has been designed for use with CTI (Cesaroni) motors. There are 3 different version of this retainer with different outer finishes. The screw thread is: M36-2 The test retainers i were printed…
Interior push part was sized up 20% Outer part was sized up 10%
Here is a simple strap keeper that can be used as a replacement part for securing the hip belt on backpacks. It ensures that loose, excess strap ends are neatly held in place. I've designed various models for straps ranging from 20 mm to…
Remover Tool for Snap Rivet - Fastener - Retainer Clip Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx Category: Hand Tools
These clips keep your pegboard hooks securely fastened to the pegboard, instead of coming off along with whatever you were trying to take off the hook. M clip.STL is designed to hold down a single pegboard hook. M clip double.STL is meant…
Pastamatic - Filament Spool Winder - Drive (spindle) Retainer Helps to prevent the drive spindle from popping out of the gears …
Yes, there are already some dumbbell-nuts out there. But they were all missing the possibility to add an additional retaining ring. So i've made this one, which fits a standard D=30mm dumbbell-bar. Also, this model is as close to the…
A much improved easy-reload retaining arm for the 6-shot disc shooter.
Tired of your Bowden tube popping out from the top of your K2 Plus extruder without a clear solution? This custom retainer provides a simple fix. It clips onto the extruder housing and secures with a short M3 screw in the heat-set insert…
A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…
Needed retainer for bowden but mounted on side of extrusion.
I wanted to print some cool version of a dust filter cover, but somehow I couldn't find literally anything interesting or fun out there, so I decided to make one myself. Now you can rock this spiked version and look awesome while you…
Needed to mount a Sailing dinghy wind indicator vertically. So I designed this clip that will hold a 'Little Hawk' vain in place on a simple 4mm knitting needle. Link to my version:…
A retaining wall for the corner of your planted aquarium. Holds back substrate to create a layered effect with deep substrate your plants will love at the back and plenty of room for fish and shrimp activities at the front. The dimensions…
A component of the parts kit 3768. It is a cone shaped lower spring retainer for my 4x4 Rustler vxl. I got my ruslter and took it out for a spin. It collected every kid in the neighborhood! An hour later after they had all had a bash, I…
This is a replacement goggle strap retainer clip for Giro snow helmets. The tab on the left is a little shorter than the tab on the right. When installing the clip onto your helmet, squeeze the bottom of the clip and insert the right side…
What is it? This is a cable retainer designed for the Creality Sprite Extruder and Sprite Extruder Pro. It relieves stress that occurs on the ribbon cable from the repeated lateral movements that occur during prints. Advantages No…
I made these P-clips for electrical wiring on vehicles such as stereo systems, lights, or OEM wiring harness repairs where metal P-clips might cause shorts due to vibrations. There are multiple sizes. PETG is best for heat resistance and…
This is a replacement watch strap retainer for Garmin watches. Mine is a vivoavtive 3 but I imagine this also fits some of the other garmin models. There are other models available for this but mine has a rounded outer surface and is very…
RC servo connector retaining clip. printed in PETG in upright (I) orientation without supports.
This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…
This is a parametric model of a circlip or retaining clip (DIN 6799 E Type External Circlip). It can easily be adapted to your use case by altering the parameters in the Fusion360 file. Just swap out inner (D2) and outer (D3) diameter and…
This is a replacement spacer / retainer ring for the NH36 seiko movement. Designed specifically around a 3.8 position NH36, but may fit other NH3x, NH7x movements. This is VERY detailed, and I am printing on a 0.25mm nozzle at 0.05…
This is a custom 3D printable assembly I drew up to solve an issue I was having with my CNC router setup. I primarily machine wood and make a LOT of chips and dust. I use a dust collector and 2.5" dust hose connected to a custom 3DP dust…
A retainer clip used to temporary keep a sprinkler rotor in the "up" position, allowing the nozzle to be changed. Should work with all Hunter brand residential (¾" inlet) pop-up rotors (PGP, PGP Ultra, I-20 series). Might work with other…
ATX motherboard standoffs with clip-on washers for a semi-secure fit. Raises the motherboard ~9.5mm off the ground. Useful for tinkering where you need easy access to the components. I made these standoffs while designing a 10 inch rack…
Print in horizontal orientation and with 6 Wall loops (100%) for strength. Should be printed with material that can withstand higher temperatures during summer. Support is recommended. Small pin needs to be inserted into the retainers…
This is a 3d printed retaining clip for tag connect debug probe. This is because the clip provided by tag connect is expensive. Dimensions is based on http://www.tag-connect.com/Materials/TC2030-IDC.pdf This openscad design used my…
This is my new improved version of a a Pro-Form vacuum forming machine. The previous model is still available, but it will not receive any update. You can print the frame stencil, but do not put in in the oven. The real frame must be made…
Window stopper for PAX windows. Enables ventilation without the window slamming shut. But please remember to remove the stopper before closing the window. Otherwise the lever will mercilessly destroy the stopper. You can use the opening…
This part was modeled after a Ford E83Z-5421952 B clip in all the critical ways. The endeavor took entirely too long to justify the price savings, but now that it exists, give it a try. I'll admit it's not as good in fitment nor strength…
No more unstraps! Easy to print - no support needed! To use with 20mm/22mm (select appropriate file) 2.5mm thick straps / watch bands. FreeCAD file included. Update(2023-04-10): added STL for 22mm straps
Shift Boot Collar Holder Retainer Compatibility : 3/8 - 16 3/8 - 24 1/2 - 20 5/16 - 18 M8 x 1.25 M10 x 1.25 M10 x 1.5 M12 x 1.25 M12 x 1.5 M12 x 1.75 M16 x 1.5 example (civic 2007) : probably won't touch this file again so if you do…
Remix of GabrielSerealia 's great model. Made some minor adjustments to suit my top covers.
ORIGINAL: Front retainer with MLOK holes. Use the long version only if you have a flash can/suppressor/extended barrel. Took DMarshmallow's barrel retainer, along with poolboy97's edited version of Louisthebeast's Glock barrel adapter,…
![[REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max w retaining screw](https://media.printables.com/media/prints/1215628/images/9122879_ee6d81c3-ef88-4d5a-ae83-562b8cf2c676_454d9de7-063b-42c7-91fd-92f32b565b2e/screenshot-2025-03-03-at-40157-pm.png)
![Dumbbell Nut [with retaining ring]](https://media.printables.com/media/prints/629397/images/4986889_71e11b9f-690d-45cb-a5dc-933b6a2a53ef_ec463bf9-fd76-4570-b941-a4c4ae8022a5/img_20231028_164652.jpg)
