Counting matching models…
This Gridfinity compatible holder has four spaces in a 1x1 holder. The front two are 8 units high and the back two are 12 units high - perfect for a few pairs of tweezers and a feeler gauge - these tools are always right beside my…
Description ⚙ WARNING: My Sense of Humor Might Hurt Your Feelings. This sign doesn’t just warn — it threatens emotional instability in anyone lacking sarcasm resistance. Printed with enough boldness to make OSHA nervous, it’s the perfect…
Take a look to my new and complete redesigned spoons here: EN: A spoon that holds about 15g of powder. The spoon is an improved version of my “old”, smaller spoon. If you like my model(s) please leave me a like to support my work. Thank…
When designing something I often need to get an idea of what a dimension feels like for real and even if I can set it on the caliper it isn't enough. I designed this in fusion allowing for customization (the files have to be created one…
Different width Sram Level TLM/Ultimate bleed blocks (part.no. 11.5015.014.090). The bleed block comes with multiple sizes: * 12mm (default) - Use when bleeding brakes which afterwards will use new pads * 11mm - Use when bleeding brakes…
The Little Devil Feel like like driving something a little devilish this Valentine's day? These subtle prints could be just the thing you're looking for! And because they attach using super strong magnets, you can quickly remove them when…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The original one created by by TomekB is a good work, it has the correct shape but it has not the same feeling of the original tank mouse due to the inverted mechanism and the fact that the button had the tendency to “collapse” toward the…
This is a small shelf fitting my feeler gauge. You also need 2 empty inserts for fitting it on your Honeycomb Storage Wall.
In use, these can actually be very accurate. The way I use mine, is to find a set that fits the space which I'm trying to measure. Then I use some precision calipers to measure the thickness of that set of gauges.
WARNING - MY SENSE OF HUMOR HAS BEEN KNOWN TO HURT FEELINGS SIGN Category: Signs & Logos
Here are the files for “I Feel Pretty Pumpkin” A Pretty little Light up Pumpkin for your Fall and Halloween decorations. i made the pumpkin and the stem so you can print them separately and glue them together to give easy colour options.…
A Pepe you can decorate your wall with. Print Settings i recommend: Printer: Prusa MK3S+ Prusament PLA 0.3mm Layer Height If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…
A set of Feeler Gauges for measuring the inside or outside radius of parts. When you are designing cases, boxes, or pieces that need to mate with an existing part, it is difficult to measure the radius accurately. This tool makes it much…
Another Funny Sign - "Sometimes I feel like running away. Then I remember how much I hate running" - dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
Wanted a simple way to hang my feeler gauge on my multiboard. This works for a generic gauge I bought and will likely fit many models. Feel free to tinker: https://www.tinkercad.com/things/fc2yucnxofo-feeler-gauge-multiboard-mount Print…
Iconic Movie Moments - Dirty Harry - Do You Feel Lucky, Punk - 1971
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
A thing to hold the SATA 32-piece feeler gauge set (ST09407SJ). Here's a link to the tool: https://www.satatools.us/products/automotive-specialty/feeler-gauge-sets/st09407sj-32-pc-feeler-gauge-set-002-100mm
The base bin was generated with https://github.com/Le0Michine/FusionGridfinityGenerator.
FeelWorld FW568 5.5 inch Field Monitor Shade No screws, sticky stuff, etc, except for double-sided tape (or general-purpose glue) to stick some black felt to the inside of the shade to kill reflections. Alternatively paint the inside of…
Creality Ender 3 Tool Holder w/ Feeler Gauges. No additional hardware required. Not my model, all credit to winchester1094 https://www.thingiverse.com/thing:5321379 Holds all stock tooling and feeler gauges on an Creality Ender 3 Pro I'm…
Mr. Rogers' Neighborhood - Fred McFeely Rogers - 1968-2001 3D printable model.
With Creality CR-10S Pro came 0,2mm feeler gauge, but I lost my nerves using it with my shittyshittybangbang fingers, so I designet handle for it. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
Quick and easy game for one or more people. Print 3D shapes Print 2D chart Put 3D shapes to not transparent bag Use your hands to feel and guess the shape No peeking!!!! Have fun :-)
Holds 60x40 Kinex Machinist Square https://taytools.com/products/kinex-machinist-square 100x70 Kinex Machinist Square https://taytools.com/products/kinex-2-piece-din-875-1-machinist-squares 200x130 Kinex Flat Machinist Square…
This is the Feelings Puzzle created with the curriculum “The Zones of Regulation” in mind. All of this can be created with simple color swaps, no multi color printer needed, no supports needed. If you are interested in learning more about…
Feeling cute might die later plant sign scale as needed but keep z height to 4mm
I found a few feeler gauges, one of which is really really close to what I wanted , but I ended up cooking his one up to make it perfect for my particular feeler gauge. I'm marking it as a remix even though there's no geometry in common…
An easy-to-print, 0.10 mm feeler gauge! If you aren't using a 0.10 mm feeler gauge and only use the "paper" method to level your bed, try printing this to see if you prefer this method! The initial layer height should be 0.1 mm, the rest…
No Baby on board. Feel free to ram into me sing color change by layer to save nozzle cleaning ams and no ams version
Wanted to use some wasted space to fit a slot for my feeler gauge
D&D Armoured warrior 2 axes (chaos / dark feel)
A mount for the cheapest Decathlon handheld bike pump (ref: 8056700 ), designed for an O2Feel Peps N3 folding bike from 2016 (with the Samsung battery). It is equipped with 19.2 mm tube where it was mounted on the photo. It was designed…
This game allows you to throw the dice and really find out how you feel today (faces), or magic 8 ball questions answered (maybe?), or pick an activity (sing) Print instructions Print is a longer print time (14 hr), and I used Brim…
I accidentally stumbled upon this effect when testing a new knurling pattern for a new ring - I used cross hatch infill and set bottom/top layers to 0 for quicker result (middle silverish thing top row in the photo). Fumbling with it just…
My feeler gauge wouldn't fit in the original by fabianonline, because there is a bolt head sticking out from one side, and the nut on the other side. So I cut out the back side as well as the front side to allow for it to fit cleanly.…
Please note: .3mf file has settings for Yousu brand TPU. Your TPU may vary, this is the first kind I got. Be careful of your build plate, use glue or painter's tape or a textured build plate, this stuff is hard to get off and this is a…
Feeler gauges for setting the distance between laser cutter's head and the material but can obviously used for other similar needs as well. The ones in the photo have been cut from acrylic based on the svg but 3mf models are also included…
Cool fidget, would recommend supports on it, cool feels and would be something a baby would love if it were safe. Just starting out here so would really appreciate a like and a download.
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
AIDA Wellen-Schriftzug – Kreuzfahrt-Feeling für dein Regal! Hol dir das Urlaubsgefühl nach Hause – mit diesem stylischen AIDA-Schriftzug in dynamischer Wellenhalterung! Die 80 mm hohen Buchstaben werden locker in eine geschwungene Basis…
I have 3 models 1 - with a logo 1 - without a logo 1 - with General feeler gauge holder (updated 1/11/25) The part is 3U tall. It will also need to be split if it can not fit on your print bed. If you have any question or feedback let me…
I mostly use 0.05mm for leveling for best results. I aim to get a very slight resistance when sliding the feeler under the nozzle from side to side.
If you like the model I would appreciate if you leave a ❤ like. I could not find any skadis holder for feeler gauges so I made this one. The inner space is 10mm x 110mm which should suit most feeler gauges.
Drei Varianten 14, 15 und 16g sind als Vorlage hinterlegt. 😄 Gefällt euch das Projekt? Dann lasst gerne ein Like und eine Bewertung da! https://www.youtube.com/@ajockisch Printer Setup Prusa Mk3s Rafts no Support yes Resolution 0,2mm…
Das ist ein einfacher Blendschutz, für den Feelworld 7 Zoll Monitor FW279. Er wird einfach von vorne aufgesteckt. Ich habe ihn mit mattem schwarzem PLA gedruckt. This is a simple sunhood for the Feelworld 7 inch monitor FW279. It will…
Open/Closed Sign Panel (Saloon Feeling) I created this open/closed sign in the "Cowboy/Saloon" style to make the most of my FDM FLashforge AD5M printer. This design is made up of 9 pieces that can be assembled quickly and has been…
A series of feeler gauges in millimeters, from 1 to 10 mm and also with increments of 0.5 mm You can hold them together using a long enough screw or something else Better results with 0.25 nozzle
Print with a strong material. ABS, ASA, and Nylon are all good options. You will need to pause the print to insert M5 square nuts. Use the slicer preview to select the final layer before the nut pockets get covered up. The FWD risers…
ENG: A simple case to create a cinema or lounge feeling in the living room. The Case is designed for Phillips HUE Play Lightbar in the bottom is a hole for a M3 screw, to fixate the Lightbar. ----- GER: Ein einfaches Gehäuse, um im…
This is a stand that will hold a 9 to 10 inch (230 mm to 250 mm) generic wall clock upright, i.e. a $3 Wal-Mart clock, for use in the background of printer time lapse recordings. It also has a feeler gauge holder so when you level the bed…
A unique 3D printable creation — this Fidget Box With Clickable Buttons, Satisfying Press Feel, Discrete Size Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
Deutsch: Ein einfacher Halter für eine Fühlerlehre mit 21 Blatt von 0,05 - 2,0 mm. Keine Support notwendig. Drucken in PLA oder PETG, 0,2mm Layerhöhe. English: A simple holder for a feeler gauge with 21 sheets from 0.05 - 2.0 mm. No…
Just a little widget that makes holding onto your favorite feeler gauge easier. It has a thumb grip on the front. Its one size fits most
The source marked this model as adult content.
In most cases a vernier scale is everything needed for taking measurements, however sometimes it’s not the best instrument (e.g. finding out the perfect hight for the fix of a wobbly table) and inserting something with just the right…
This is the colorized version of the original model. I started from the Thingiverse version which doesn't have a hole to place the magnet, added a negative volume so that you can adjust the magnet size. The .3mf file is from OrcaSlicer,…
Gridfinity bin (1x3) for a Mitutoyo 184-313S.
Here is a quick and dirty way to keep your precious 0.1mm (or other) shim stock flat and easy to use for bed leveling. Print Cut a strip of your favorite shim stock no more than 20mm wide. (I use 0.1mm) Put into holder The holder should…
Für Eriba Feeling Fans
Slice with 0.28 mm layer height and 0.6 mm line width. This will work with either a 0.4 or 0.6 mm nozzle. 1.2 mm wall (2 wall lines). Add a pause at layer 11 to allow placing the gauge. A bit of tape helps keep the gauge in place for the…
Printed with Photon Mono. SLA works great.
Attach 25mm gamepad style rumble motors to FeelVR pedal plates. Requires you to move the brake/clutch pedal plates to either of the side mounting holes. Will fit behind throttle as is. I recommend using the motors with 4 larger diameter…
Store your Proto feeler gauges (Model #: J000A) in a modern gridfinity bin.
Anti-dust box for 13 blades (0.05-1.0) feeler gauge (RS-ONLINE)
An alternative to the hard to find/source metal feeler gauge of ~1.2mm thickness that came with the under the tank front brake master cylinder and ATE disk brakes found on /6 and /7 BMW airhead bikes (approx. 1976-1979) prior to the…
Habe es liegend gedruckt. Nach dem Druck habe ich das Objekt noch mit Klarlack eingelassen um es spülen zu können.
Jednoduché skladné stínítko pro náhledové monitory Feelworld 5,5" Po vytištění opatrně odlomit bočnice od vrchní části a odřezat podpory a límce Simple foldable sun shade for video monitors Feelworld 5,5" Print it with PETG 0,2 mm , rafts…
Honeycomb Storage Wall holder SATA 09401 feeler gauge. Possibly compatible with other gauges it's aprox: 86x10x13mm Non-Affiliate Link for this feeler gauge: https://www.amazon.com/dp/B097NN3RKD Although this is my own design additional…
Fid is a piece of plastic to fiddle around and hold in your hand
Make sure to print on 0.1mm to 0.16mm layer height for best feel. Resin would be better, but I don't have one. If you do, give it a try! The stick height is 10mm. Make sure to check out Nico's design for an alternative style.
Ideal for those who mount a custom bracket, it allows you to adjust the right height and reduce the Z-Offset to a minimum. The specifications of the BL Touch give a height compared to the nozzle from 2.3 to 4.3 mm, I created the 3 feeler…
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee. Filament: PLA
See Me Feel Me Chess a modern take on a chess set (including board) for all people, the blind included. The colour of the pieces can be seen and felt and the same goes for the fields which are profiled square (black) or round (white).…
An ant feeler hairband. I recommend PETG instead of PLA, the higher flexibility makes it more comfortable to wear
This is a silly little bracket for hanging a feeler gauge on. Uses a single M5 bolt and T-Nut. Print instructions Category: 3D Printer Accessories Print Settings Rafts: No Supports: Yes Resolution: 0.2mm Infill: 40% Notes: I printed it…
I saw the video, and I figured it should be easy enough to design and print, so I made it. Since the wood grain is important in the real puzzle, I added lines to simulate wood grain. Tolerance are quite tight, so you need an accurate…
A hammer bead with a open handle to feel your drawstring while you go to work. 6mm hole. Thanks for the support.
3 files: I have uploaded 3 files, one variant for the bottom part and two variants of the top part. One with text and one without. Tolerances I have designed the parts with 0.2mm of clearance between sliding surfaces, so they slide…
While I'm designing something numerous times I need a quick example of how thick something will be so I made up a set of 8 “ feeler ” gauges from 1mm - 5mm. Sizes are: 1mm - 1.5mm - 2.0mm - 2.5mm - 3.0mm - 3.5mm - 4.0mm - 5.0mm I made a…
Recommended to print with ABS or ASA, 100% fill.
Do you feel lucky, Punk? A yellow warning triangle with an unhappy cat.
A fluffy heart for my loved one - I love how she constantly makes me better. This model is designed to be printed in vase mode so that it really symbolizes the lightness of feeling matching the words that are engraved; it weighs only 2g…
This project is a token-and-tube based emotion indicator , designed to help kids express how they feel — without needing to talk about it. It’s made for boarding schools or group homes where children live under supervision and may find it…
Your Feelings Are Not Facts Category: Office
Pocket clip for a Harbor Freight (Pittsburgh) brand feeler gauge. May or may not work with other generic feeler gauges. A Pittsburgh feeler gauge was used for all reference measurements. Print without support using orientation…
Feels Bad Man - Pepe The Frog - Line Art Easy to print, around 30 gm of filament. TIPS: Use Arachne Wall Generator to best preserve quality. Use Avoid Crossing Wall setting at 200-300 mm to have less stringing. Wait until the print bed is…
Hi, if you have Feel 105 computer case, you may got problem with cracked power button! This pad solve this problem. Enjoy Category: Parts
Extension for the Reer radiant heater (1928) 2in1 FeelWell Wickeltisch-Wärmestrahler that raises the heater head additional 10 cm to further increase the distance from the baby's changing table. The extension has to be printed in a…
I remixed sporadic's dial gauge holder for two reasons: One, it wouldn't fit my v2.1, and two, I bought this dial gauge thing on eBay and it wouldn't reach far enough down to touch the plate. If you have a v2.1 and that gauge thing, this…
This is an experimental design for exploring methods of physicalizing VR surfaces. It was made as part of a university project. To make this you will need: 3x MG90s OR SG90 servos 1x Arduino Nano or equivalent (I used the Nano 33 BLE…
I designed this to mount my 7" FEELWORLD 4k Ultrbright field monitor to my tripod and other things. Models include tripod adapter and fork mount for monitor as well as spacers and bearing mount. Side (pivot) thumb screws and tripod mount…
