Counting matching models…
You like 🥰 the KID'nR filament spool silica gel boxes, but your spools don't fit as they have a larger inner core diameter? Here it is the KID'nR XL : All the features as the standard model but now for spools from 56mm - 90mm inner core…
This is my Stargate intended to be mounted on a wall. The gate is 80cm in diameter and it comes with separable Iris. The inner ring rotates and it has a preparation for eventual lihting. It is a kit and theoretically does not require any…
This Tool can be used to measure the outerdiameter of something. You can either print the numbers in the same color as the rest of the model or you can print the numbers in a different color. To find out how to do this, please read the PDF
The listed diameter in file names refers to the inner diameter of each piece, allowing precise cable organization. When printing, be sure to add a brim at the base to ensure secure adhesion to the print bed. With the Prusa MK4S, no…
UPDATE 12-16-2022: Added support for Stronghold and AMOLEN 250g spools. ---- Eryone spools are a different size (150mm diameter), so I modified the original design in a couple of ways. This should work for any filament spool that is…
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
What it is A compact gauge to determine inner and outer radii/diameter, ranging from 1 to 20 mm. It also works well as a coaster. What to print There are multiple variants awaiting you: central gauge version 1 measures from 1 to 10 mm in…
The InFiDEL is a cheap (< $5) filament diameter sensor that can be calibrated to provide surprisingly precise filament diameter readings in real-time. While firmware support is currently sparse, the idea is to use the sensor to correct…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Find the diameter of parts by successive tests on the gauge as in the image below: The numbers on the gauge are the diameters and range from 2 to 15mm.
This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…
A hole diameter measuring tool which you can keep in your pocket. It can be used to check diameter of a hole where other tools might not reach due to tight space. The 14mm variant can measure 14mm, 12mm, …, 4mm diameter. And the 15mm…
Excessively cute siamese cat bookmark. 140x50mm 40x50mm, 3.2mm thick for the kitty 90x25mm, 1mm thick for the bookmark Can be printed without an AMS. Other cats are available in this collection: Cute cat bookmarks Printing instructions:…
Help: Every washer is 1mm high , if you want higher washer just scale it in Z direction by this formula to get desired height : height[in mm] = percentage/100 ID - Inner diameter, OD - Outer diameter Expectations: Don't expect a washer…
The original design was great https://www.prusaprinters.org/prints/22608 but there is always room for improvement. The original designer, Tetralite, did his own update and made a version 3. https://www.prusaprinters.org/prints/74621 . I…
The Centring Square is an essential tool for precision work. It helps you easily find the center of round diameters – perfect for drilling, marking, or alignment tasks. Why choose this tool? ✔ Always useful in the workshop and for 3D…
A remix of LoboCNC's Gravity Broom Holder , integrating 3 and 4 holders within a single block. For compact storage of multiple brooms or other tools, requiring fewer screws for mounting on the wall. Adjacent holders have been slightly…
Excessively cute siamese cat keychain. 40x50mm, 3.2mm thick Other cats are available in this collection: Cute Cat Keychains Check out the bookmark versions in this collection: Cute Cat Bookmarks Printing instructions: Start with Beige…
This is an original design for a full scale side table made entirely from 3d printed parts. It was inspired by the Print-Tables contest, celebrating the launch of Printables.com. Each individual part fits within the build volume of a MK3…
The original size 50mm diameter was too large inside my dry box, while simply resized it to 80% would have made the slit too narrow, so I designed a container optimized for a 40ｍｍ diameter. This container is 40 mm in diameter and has a 1…
All designed parts of the peristaltic pump are printed out of PETG. For the hose I have choosen silicon to avoid high forces by rotating the impeller. The hexagon shaft where the impeller is put-on have two interfaces, on one side an…
Use plenty of solid top/bottom layers when printing. I used 6 solid layers PETG, then 60% full honeycomb infill and had no issues with durability. The models are all tested!
Updates 23-03-04 Radius measurement was incorrect due to incorrect application of the ‘decorative’ edge. Resulting in a 0.7mm radius measurement error. This has now been corrected Increased size of text slightly on the joining ledge to…
This is travel box for pills with three compartments. It is bigger alternative of my small Pill Box . The diameter is 80mm and total height is 25mm. The cross is printed separately and glued to the lid. Recomended layer height for good…
Update 12/18/23: I have found that using a square of shelf gripper, liner, foam under the cutter prevents the base from rotating. See third photo. Press firmly on the spindle with one hand while rotating the blades with the other. Cut two…
As you all know, 3D-printed holes usually come out smaller than designed. This Thing consists of 10 holes designed with diameters of exactly 10, 9, 8, 7, 6, 5, 4, 3, 2 and 1mm. Print it out and use calipers to see how much shrinkage your…
I previously designed a silica gel container with a diameter of 40mm as it was needed. and this time, I have changed the design to allow for printing the bottle in vase mode. Printing in vase mode results in reduced printing time and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I tried a few paracord winders to organize my paracord, but none worked as I had…
This adapter is designed for the QIDI Box, which is a multi material system. Some filament spools—such as SUNLU rolls with a diameter of only ~195 mm—are too small to rest properly on the front and rear rollers. Instead, they sit on the…
Ein Ersatzteil, falls das alte brökelig wird und keine Gitter mehr besitzt. Ich habe meines mit einem schwarzen ABS Filament gedruckt, da es besser für outdoor geeignet ist. Veränderungen dürfen gerne vorgenommen werden.
I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…
.20 mm layer height WITH supports Instagram https://www.instagram.com/spitzspot/ Print instructions Category: Food & Drink
I have designed this clip for the new 2021 Festool vacuum hose. It is custom-made for the new diameter.
You need a “Snap” to attach this part to a multiboard wall. Visit https://www.multiboard.io/ for more information.
Pipe connector three-way corner piece 90° for pipes with a 16mm diameter. 50mm depth. Can be scaled up if necessary for larger pipes.
I have an old holder that have a 17mm diameter ball but do not charge the phone so I made this Print the washer in tpu, I think there are rubber washer in hardware store can fit there if you can print it. I include a CD stand with ball so…
Bonjour les amis. UPDATE 22 FEV 2023 Seconde version avec les numeros qui ne traverse pas complètement la pièce afin de pouvoir faire un changement de couleur comme dans le…
Ive got another request from my gf, that she now wanted another Planter, this time with Pikachu. So i went and took this model, tuned the triangle count down so the model was around ~2mb, uploaded it to tinkercad (im learning Fusion 360…
Esta rueda loca ha sido diseñada para ser compatible con canicas de 15 a 16 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…
Possible to print in 2 colors with MMU to print logo Diameter : 40 cm
U-Strap Clamp - Tension Tube Clip Conduits Strap Clamps for Pipe Fixing on Various Surfaces For mounting plain or insulated pipes Dimensions available: Ø 50mm Ø 60mm Ø 80mm Ø 100mm Update: 16/05/2025 added Extra Strong Version 14/11/2025…
I increased the inner diameter to 54mm and changed the thread. Thread tolerance = 0.35 mm so calibrate the flow rate beforehand. Material used = ~150 grams Edit: 22.11.2024: Now the whole model can be printed without support. added thread…
This was made to have a very tight fit with the magnet so that glue wouldn't be required. Depending on your magnet manufacturer, you may need to resize the width and height by a tenth of a millimeter or so. I printed with 0.20mm layer…
All credit for this system of cover to toggle switches goes to the original uploader firstgizmo . Big thanks to you, for your model and your share of the step files. I only made changes to accommodate smaller toggle switches like these:…
This is a simple cable clamp for mounting cables to surfaces. The screw hole has a diameter of 5mm, and the cable hole has a diameter of 10mm. This design is resizable, so only one file has been supplied (Though, I can create more sizes…
Secure-Snap Cardboard Spool Ring for QIDI Box - various diameters 3mf is the QIDI Studio Project for ASA (smooth plate) The Problem If you use cardboard spools in the new QIDI Box, you know the struggle: most adapter rings rely on a…
An adjustable paper roll holder for 11cm diameter size paper rolls. Print instructions Print settings Material: PLA Infill: 15% Supports: No
Quick to print, consider its size. I created it to fit to rods for diameters from 16 mm to 26 mm. No supports. No additional hardware or tools are needed. Only printed parts. Nut from back fits to all uploaded sizes. Nut is slim and you…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Description : This custom-designed spray can holder is specifically crafted for use with honeycomb storage walls. Featuring a snug fit for a 70 mm diameter slot, this holder keeps your spray cans neatly organized and easily accessible.…
The Parts are split into bodies which allows for easier printing without support. Parts are labeled A,B and C which are meant to be glued together. Be careful to glue them in the correct orientation. There is a Fusion 360 file attached so…
A round sieve with 170mm. diameter and 4mm. holes.
— English Version below — *** Update 01.04.2025: Alle Modelle wurden auch in einer horizontalen Version hochgeladen. Für Schuhbänder zum Beispiel *** *** Update 27.03.2025: Es waren irrtümlicher weise in beiden Ordnern die eckige Version.…
I designed these feet to protect a wooden floor from the metal-pipe legs of a couple of chairs. With the exact angle of the legs, the base of the feet is flat on the floor, reducing the risk of damaging the floor. Update 2025-08-06: This…
Always wanted a throw lever to quickly change the zoom level on my Vortex Crossfire 3-9x40 scope, so I made one. Actually two, one with a straight lever and one with an angled one to interfere less with the bolt handle (see images). My…
What it is A gauge to determine inner and outer radii/diameter, ranging from 1 to 15 mm in 1 mm increments. For some reason victornpb's model triggered me to design a gauge that does inner and outer fillets/radii in one piece. I wanted to…
I remix this thing to create a flesh tunnel and made a hole with a bulge in it. The wall of the 20 mm and the 10 mm tunnel is at least 1mm thick (in the middle a bit more). I have not tried to print the tunnels with a fdm printer yet…
This file helps you figure out what size supports to use, and quickly check for any problems your supports may have with a specific exposure. Before printing this file, first find your desired exposure using one of the many fast, flat…
This model includes the following objects: A bar that holds router bits at an angle and that can be screwed or glued to a base plate. Lengths: 200 mm (7 bits) 250 mm (9 bits) 300 mm (10 bits) 340 mm (12 bits) A 6mm insert An 8mm insert I…
Check out Version 2: https://www.printables.com/model/1481683-hole-gauge-calibration-v2-diameter-block-test-with I kept guessing at hole sizes for support rod inserts into models. This print allows for rod insertion testing to know what…
Kropítko na zahradní konev průměr 34mm - Sprinkle for garden watering can diameter 34mm
This 3D printed turbine features : Full variable pitch control Huge size 1200mm blades 2700mm wind turbine Includes 6 blades for improved low wind performance ( RPM monitoring Supports a lot of generators/motor types Has a slip ring to…
I needed a “tool free” 3/8" diameter bolt and nut for an outdoor application. The thread pattern on this 1.25" (31mm) long bolt matches conventional 3/8" metal bolts. I also included a separate 1.5" diam cap to fit over the head of 3/8"…
UPDATE February 2026 - It turns out that on hot surfaces the rod loosens because the materials gets too soft and deforms under load. On the other hand, I have one pair that I use only indoor, and it holds up well 1,5 years already.…
Printable without supports.
I needed a special Ring and couln't find it so I created a ring generator. The model uses OpenSCAD (free and open source software). If you are not used to OpenSCAD see https://openscad.org/ It would be nice if you post your make. Thank you
I wanted a larger version of the well designed, sturdy, simple to print original Trash Bag Holder XL. Large 33 gal trash bags in family size boxes from Sams Club, Costco, BJ's etc will fit in this larger version. I also added mounting…
Esta rueda loca ha sido diseñada para ser compatible con canicas de 21 a 22 mm de diámetro. Es un componente esencial para tus proyectos de robótica y movimiento, permitiéndote crear mecanismos de ruedas locas con facilidad. Detalles del…
Kropítko na zahradní konev průměr 25mm - Sprinkle for garden watering can diameter 25mm
Measure the diameter or radius of a corner/fillet using this circular tool. Many of these types of tools use the easier to model semicircle, which may not be as useful as most corners, which are 90 degrees, have a fillet of a quarter of a…
hydro drip ring, 100mm inside diameter. fits 1/2 inch / 13mm hose. print the ring with supports on build plate. i used 4 clips per ring, which clip right on, don't cover the holes on the bottom. Included fusion 360 file and STEP Print…
I needed a funnel to fit in a 7mm OD hole to fill up with sand. Quick model in Fusion 360. Nothing fancy, just a basic funnel to into small holes. Spout is 40mm long. OD is 7mm at the bottom. Top of funnel is 80mm diameter. 100mm height.
Remember, remember, the prints of November; When extruder and printbed get hot. I see of no reason why the 3d-printing season should ever be forgot... exported the following sketchup from google 3d warehouse, removed the terrain and…
Checkers pieces have a habit of getting lost so secure them in this container! Note: Not really a remix as its a new design but it was built to complement the model here so I added it as a remix so its easy to find for people. Print…
Changed the size a bit. The llama's chin messed up a little on mine, but some flush cutters and some careful sanding solved the problem. Infill 30-40% -> you could probably use less. I went with more just in case. Supports definitely…
This is my first 3d project, I've learned how to prepare a design for vase mode. Dim: 40mm x 40mm x 40mm Print Settings Printer: SnapMaker 2.0 Rafts: Doesn't Matter Supports: No Filament: Devil Design PLA Blue Grey Category: 3D Printing
Welcome to my slightly overengineered soap bubble wand called “ THE BLACK HORNET p1 ” (approx 10cm diameter) ( Please refer also to “THE BLACK HORNET p2” which is an addition to this). This soap bubble wand came to life by a request of…
EDF printed because the original one was a little bit too small Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without…
Small 45mm diameter print in place fidget spinner with a short print time and a quiet spinning action. Tip: add a small drop of sewing machine oil to get an optimal spin. Check out my other models here 👀 See my other fidget models here 👀…
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
This is just a remix of the Net Pot Ring from this model by To0kan from Thingiverse to have a tighter fit on the “ Upgraded Modular Hydroponics Tower - More Compact & Stable ” by Conr8r. The part that goes into the tower slots now has a…
An aerosol can spray nozzle that was made to connect to a flexible 6mm diameter hose. Designed to be printed with TPU filament.
These worms can be a little scary, but they are very cute! Brainy (with his brain visible) and his Siamese brothers are very nice! The Gang of Worms is a series of toys for boys and girls, quick and easy to print, suitable for gifts and…
Feet for a camp chair, with legs of 14mm legs. Stops the legs from sinking into the mud/sand. It should be an interference fit but it can also be held on with a m3 bolt.
spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…
Christmas is coming soon. But still enough time to 3D print a magnificent Christmas decoration. For yourself, your family, or as a gift for friends. You will make an impression because this Christmas star is something special: The design…
Avoid brittle PLA's for this, it needs some flex. Snaps on perfectly with this PLA+. Will be uploading another model without the splits for TPU/TPE for a water-tight fit. Print settings (Cura): Walls x 3 Top/Bottom x 6 .2mm layer height…
New Wall Holder: https://www.printables.com/model/1054010-running-wheel-wall-holder ********** English ********** A smooth and very stable wheel with a diameter of 20cm. Suitable for hamsters, mice, rats and the like. For larger ones like…
The blind cover has two parts, the base and the cover. The base gets screwed to the flush mounted box and the cover snaps onto it. I don't know if the 60 mm flush mounted boxes are used outside of Germany. The snap mechanism is inspired…
A quick pvc pipe cross joint with a 90 degree angle to joint 4cm diameter pvc pipes.
Designed for inserting 3mm, 4mm, 5mm, and 5mm diameter magnets into printed projects. Load a few magnets into the 10mm slot in the post in the desired orientation/polarity. These magnets hold the magnet on the tip in the desired polarity.…
2 variants: for tubes with 14mm outer diameter for tubes with ½ inch (12.7mm) outer diameter Print it in PETG for more flexibility. Optimised for printing without supports to save time and material.
I recently got into feeding the local birds and noticed that the seed was disappearing suspiciously quick… I did not want to spend $50 on a squirrel baffle, so I designed and printed one using a $15 roll of PETG! This model consists of 5…
Tactical mount for 20mm diameter flashlight. 0.2 layer height Print in ASA or ABS.
While in the process of installing a CO2 air filter on my fish tank I realized I lacked a tube adapter to join two tubes of different diameters. Less than one hour later the problem was solved :) You should be able to customize this to…
All prints are oriented for best placement. I used PETG but any filament should work. I used a .3 layer height but again you can print in finer detail if desired. Happy printing!
Knurled Knob for 1/4x20 nuts and bolts. I really like the feel and grip of the knurled knob, and it has a smaller footprint than wing knobs. This is perfect for woodworking jigs that use T-track 1" outer diameter, fits the 7/16" head on a…
Picatinny Mount for 18mm diameter Mini Maglite This will fit a Mini Maglite or any other torch that has an 18mm battery tube. You will need M4 x 30mm Socket Cap Screws and M4 nuts (2 of each). Print Settings Printer: Cetus 3D Mk2 Rafts:…
