170 models
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…
Print approx. €11.79–€14.41 excl. taxPreliminary estimate for one variant
Mount for a small battery led backlight under your bikes saddle
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET
This battery adapter lets you make a powerful worklight with your Metabo 18V tool batteries. You need: Suitable LED Light Small spring, ca. 5mm diameter, 10-15mm length. 5x M3x16mm screws for Case 1x M3x25mm screw for Lever Toggle switch…
Print approx. €11.60–€14.17 excl. taxPreliminary estimate for one variant
A simple generic rectangular bracket (OpenSCAD customizable) . I use it to mount a Govee WiFi LED TV Backlight camera on top of a LG OLED TV which is much too thin to mount the camera as originally intended. The scad file can easily be…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
This model was inspired by this design by Spudinator ( Spencer Owen ). My design uses the same PVC trim from Lowes which is $7.31 at time of writing. ("Schluter Systems Rondec 0.313-in W x 98.5-in L Bright White PVC Bullnose Tile Edge…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Holder for worklight or other things with magnet or metal plate on the bottom to Honeycomb storage wall. This thing customizable throw OpenScad file. You can customize: - Plate dimensions: lenght, width, thickness - Plate shape: oval,…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
I suggest you to print the part where the working lights are attached to the side, this will require support but the print will be much more solid with 3 perimeters and 20% infill. The part where the battery is inserted can be printed…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for PETGSource material: PET
This Print houses an Node32s Microcontroller, USB-C Breakout Board, 8 Pixel Neopixel (WS2812B) Ring and holds an Lithophane. You can programm the Node32s to light up the Neopixel Ring in any color and do animations. If you have a home…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
About In the industry, most machines have a stacklight so machine status is easily visible from afar. Let's do the same with a 3D-printer: This is a stacklight for the Prusa Mini+. It should be possible to adapt this to other 3D-printers.…
Print approx. €7.46–€9.12 excl. taxPreliminary estimate for PETGSource material: PET
I printed the Mini Playboard by 3DyPrinterGuy with a black background. It makes it a little difficult to read. I decided to use an LED string to backlight the play mats.
Print approx. €6.46–€7.90 excl. taxPreliminary estimate for one variant
LED used (click) on Temu. LED Alternativ Link on Pearl Germany LED Alterniv link on Aliexpress Beatifull Design from evax design . You can find the original HERE . A wonderfull christmas decoration with different mount options. This…
A customizable DIY macro keyboard with RGB backlight and USB C, which uses cherry mx keys. Features RGB backlight Fully customizable Compatible with all cherry mx keycaps USB C Simple assembly Cover for transport included No supports…
Had someone ask me to build a Simpsons TV but larger than ones already online. So after some searching I found the 3.5 inch version to be best for my needs and scaled it all up to 1.712 then added some brackets to the front face to fit…
This houses 4x lithophanes, each one should be 100mm x 100mm x 4mm. They are sandwiches between the 2 halves, and you use M3 screws to hold it together. The backlight plan was designed for a 1m LED strip - this wraps around the center…
Note: I added a customizable OpenSCAD file for the round keycaps. This is my first ever attempt at OpenSCAD, so there are probably some bugs and until now no input checks. I have also a hard time naming variables, so they are not all…
This replaces the Harbor Freight 27 LED Worklight's 3 AAA batteries with a single 18650 and a charging board. I also removed the smaller 3 LED light because I never use that one. Materials: 1 micro usb charging / protection circuit - I…
This is a 70 watt "7000" lumen dimmable LED floodlight that mounts on anything that has a 1/4" or 3/8" thread. It's a standard thread used on all kinds of camera gear, like tripods, microphone stands, articulating arms, etc. Also has a…
Simple and easy to print housing for an airtag for hidden mounting on a bike. It uses the usually free space on the rear light attachment. We have several bikes and the distance of the 5mm screw bolts of the taillights always measures…
Added a illumined logo to the model of Dan Cernogorsky . Printed the "Logo Transparent" in PETG clear (e.g.…
Parkside LED Worklight PLSA 20 Li A1 - it is little bulky, clunky, awkward when stored. Foldable legs solves that proplem! Also it can better illuminates from behind the edge. You need: 2 pcs - M4x20 screw (preferably flathead) 2 pcs - M4…
Heat Set Insert Press With this conversion kit, the Paulimot drill stand can very easily be converted into a melting helper for thread inserts. Never again crooked threads or missing hands. ;) The print can actually be made in all…
4 LEDs 3mm 3volt. A board that lowers the voltage from 24V to 12V is not needed!! A resistor of 560 Ohm or 680 Ohm, 0.25 W is sufficient Power it from the hotend fan connector. It turns on automatically when the temperature exceeds 50…
I've designed a STAR TREK sign from the 70s that is soon getting enhanced with other more atmospheric backlighting. The quest for the perfect light diffusion and layer thickness took a while, but I'm proud to present two projects with…
This design fits the contour of the wing-bar racks well enough to stay in on their own and can be used as a replacement cap or modified for other lights/equipment. Specific lights I used:…
I neede a worklight for my IKEA Skådis pegboards so I designed this to fit over a 1m led diffuser channel. This fits 17,3x7mm LED-profile. (picture of profile in photos) You need 2 M4 bolts to assemble the joints. I have included the .f3d…
This is a stand for my **70 Watt worklight.** It's designed to take Makita batteries, but making an adapter plate for other 18V batteries like Dewalt, Milwaukee, Bosch etc. - is possible. A fusion file is available for a blank plate so…
This is the most amazing and beautiful decoration for the interior. The dimensions of the tree are 1037mm x 1531mm. I used an RGB LED strip with WIFI control. In order to print all the parts, you will need a printer with a heating bed of…
This turns the standard calibration cube into a light up display piece. Add RGB via an ESP32 or D1 Mini, or simply drop in an LED tealight for a soft glow. It also makes a great decoration for Halloween with the Pumpkube version, or…
Remix of Jerrari's excellent design, to hold the LED R18ALF-0 worklight. See my other remixes for variants to hold the circular saw and jigsaw.
Why keep the room lights on when you just need to see the printer's bed? Add this easy-to-print lighting setup up and get lit! Snap-on lighting for a Prusa MK2 and possible MK3. Uses a 12v 17cm DRL (Daytime Running Light). Print…
While repairing the backlight of my LG TV, I broke the standoffs / clips that hold the light diffuser foil away from the LEDs. I threw together a quick replacement in OpenSCAD. TV model is a LG 42LN5708. May fit other models aswell.
This is my solution for wanting an overhead LED light that works with Multiboard. The files work as uploaded but this is still currently a work in progress. Functionally they are fine, aesthetically, and proper design/printing standards…
We upgraded our Fendt 514C Favorit with some nice looking LED worklights by mounting them at the front and backlights. Cables have already been preinstalled by the factory and are easy to find. Just attach the printed brackets and mount a…
This is a solar charging and automatically switched backlight for your lithopanes. All non-printed components are repurposed from inexpensive lawn/garden solar lights (pack of 4 is $9.99). This is a super easy re-purpose. Small amounts of…
I didn't like any of the lights available from Makita and didn't want to start down a whole different battery family in order to find one that I did like. I've also tried many of the various lights with built in batteries and have been…
I split the models into parts in slicer. The shadowbox does take some time to clean out the channels for the inserts. 10mm led strip lights fit nicely into the shadowbox.
A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!
This is a mount to use a LED strip as a backlight for your Displate. Additional Parts To build the backlight, like in the pictures, you need: Ws2812b LED strip (can be a different one, if you prefer another) ESP32 running WLED (see WLED…
Added openings for running in wire. Front panel and back housing holes sized for M3 inserts. There are multiple mount models but spacing on the back is 50mm in order to use the din rail clip created by Cube-Tech Printer Used: Prusa Mini+…
Printer: Anycubic Vyper Rafts: No Layer Height: 0.16 Infil: 20% Supports: No Filament: PLA Rotate model so that the top surface is on the build plate. Use thick double sided tape to secure in place.
Sub250 said that the Huma was only suitable for the DJI 03, however just two parts are required to fit a Walksnail Moonlight as well as some 30mm (M2) standoffs and two 10mm x M2 bolts.
Basic backlight mount for bikes
I used the original arms with the multipoint mounting and designed different mounts for the LED light I bought. Per arm you need 2 x multipoints flush mounts (and (flush) snaps , too, probably) and 1 x M4x30 bolts, nuts and washers. In my…
I designed this backlight mount for the Busch & Mueller Line Small. It can be attached to the bike rack screws on the back of my cargo bike. This ist the "NEW" version with embedded Nuts and overall a little bit thicker. Print…
Govee LED TV EYE Backlight Stand for Slim TVs. Secure mount, no backlight obstruction. small amount of double sided tape and goes over the lights and stays secure. Printed in PLA at 25% infill on its side long ways up, no supports came…
This is a lamp holder to backlight a lithophane. I purchased the Strala cord set and needed something to hold it behind the lithophane. I decided to invert the light bulb in order to get the light to fully illuminate the lithophane…
This is for the really cheap "Walfort Multifunktionale Beleuchtung" from Action https://www.action.com/de-de/p/3007645/walfort-multifunktionale-beleuchtung/ Thanks to @faltypi for the mention. The light can shine white and red (the…
Remixed VicPucky's model to use magnets for easy removal of the Govee TV Immersion LED's. Magnets are from Harbor Freight and simply super glued in place. I did use 3M Extreme double sided tape to mount the blocks. Links to each below.…
I have designed a pumpkin for you into which you can either place a tea light or, if using fluorescent filament, a black light. With black light or UV light, you have the effect that the pumpkin's face continues to glow even after it is…
These are mounts that can be used to attach a work light or lightbar to a ROP (roll over protection) made of 2"x2" square tube steel. They use M5 cap head screws (30 - 40mm) and nuts for assembly. Nuts fit into recesses in the larger…
Print with the words on the build plate. I print using PETG from California Filament with 0.2mm layer height. Consider supporting us on Patreon!
A Nintendo 64 Cartridge Holder with possibility to add a backlight (WS2812 strip) You can check my illuminated logo here https://www.printables.com/model/701923
This is a mount for mounting LED strip to a IKEA Lindbyn oval (60 x 120 cm) mirror. The spacers allow for more stability when mounted on the wall. They are pretty much a must have and they also provide some space for the power supply,…
This adapter works with the “Game Boy Advance SP 3.0 Inch IPS LCD Backlight Kit M2 - FunnyPlaying” from handheldlegend.com. https://handheldlegend.com/products/3-0-laminated-ips-kit-for-gba-sp (INCLUDES) - Top and Bottom Brackets so LCD…
Replacement Part, Ersatzteil Cover Cap for Punto 188 Backlight, Abdeckkappe für Punto 188 Rücklichthalterung Printer: Own Build: ndl V3 Rafts: Doesn't Matter Supports: no Resolution: 0.2 mm Infill: 30% Filament: Generic ABS or PETG Notes:…
Vesa mount for Govee TV backlight 3 lite. Used M8 (28 mm long) bolt to fix into the TV.
I usually go fishing at night for eel, zander, perch… i didn't find any bobbers which could hold a glow stick, so i ended up designing this classic livebait bobber which holds a regular 4.5mm diameter glow stick (or a rod printed in glow…
Two worklight mounts. One for attachment to the grab handle on a 3038e and one to allow replacement of the original Hella worklight on a 1025R with some other type of worklight. The 3038e mount screw pockets were designed for use with 3mm…
The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combined flip-flat system. Designed for versatility and modularity, the DLC supports a variety of setups: Light Panel Only –…
Make artillery great again!! Ich habe hier für euch eine kleine Auswahl an Extruder Hüllen. Diese haben Luftschlitze für eine bessere Wärmeabfuhr. Das Origianlgehäuse wird bei langen Drucken sehr warm (>50°C). Hier gibt es innen mehr…
Author : Volan Link : https://www.printables.com/model/10929-70w-dimmable-led-worklight-v14 Minor changes : I replaced the square nuts for fixing the bezel with hot inserts. I’ve reduced the housing for the square nuts so they can stand…
I did not fully trust the printed loc line segments; that is why I created a clamp that uses two M3 screws with nuts to grip the end of a 3/4 loc line segment. The advantage of this approach, in my opinion, is that the printed parts are…
Just a small wrench for the hanklight metal button upgrade! Hope it does well for you!
Now that everyone drives around in huge SUVs, I added a third brake light to the rear shelf to improve the visibility of my classic Mini in traffic. This printed part attaches the generic brake light to the rear parcel shelf. To do this,…
Print using TPU. The elasticity depends on material and infill. No post processing needed.
Seen the original model but it was not made to fit around the original displate offset mount. I bought this already in the past and had it installed on the wall already. Made it so it easy slides around and holds the LED strip. Made the…
Author : Volan Link : https://www.printables.com/model/34758-stand-for-70w-worklight-v11 Minor changes : I added 2 screws and 2 square nuts to assemble the lock. On the bottom cylinder, I reduced the slots for square nuts. On the right…
I needed a mounting solution for a Büchel LED e bike backlight and this is what I came up with. Printed mine from black Das Filament PETG. Useable for saddle posts with 27mm diameter and LED backlights with minimum 48mm screw post…
Xiaomi Scooter Pro Licht Adapter
I didn't have enough backlight when printing on my Tronxy X1 and I designed this holder for the hotend. This addition is simple and practical, does not require additional fasteners. I used one piece of a standard 50 mm LED strip (there…
This is designed to mount the Bosch GLI12V-300N Worklight (https://www.boschtools.com/us/en/boschtools-ocs/12v-max-lights-gli12v-300n-178350-p/) horizontally so that it shines down on a workbench. Either mount this to a wall or to a Slat…
These wall mounts allow for skateboard mounting on any wall Option for LED backlight (3-pack was available at Costco) to use as backlight/indirect lighting, these can be activated by motion or remote control and are USB-C rechargeable Use…
(english below) (C) 2023 by Oliver Kuhlemann, cool-web.de Quelle: Oliver Kuhlemann, https://cool-web.de/3d-druck/ Die China-COB-LED von AliExpress mit der Aufschrift Worklight hat zwar einen starken Magneten im Fuß, steht aber auf nicht…
🟦 Full Description This project is a DIY customizable wall lamp , perfect for makers who want a unique decorative piece with a modern illuminated touch. You can design your own front plate (text, logo, silhouette, symbol, etc.), print the…
Replacement joint for repairing the "Worklight" LED lamp (Larger 18650 version). Individual parts may not be compatible with the original, the entire joint should be replaced. Recommended PETG/PLA, perimeters only.…
This is a project that I worked on with my kids for Mother's Day but it is applicable to any picture that you would like to turn into a lithophane. It is composed of 4 parts…the lithophane itself, the box, the lid/bottom for the box and a…
I wanted to add a small but stylish light source to my e-reader. That's why I created this light that is easy to attach and detach. ClickLight! And attach and deatch! Parts what I used: Flexible COB LED (Warm White, 80mm) CR2032 Battery…
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
The existing backlight of bike helmet “Abus Urban-I 3.0” eats CR2032 batteries like cereals at breakfast. So I designed a ne adapter for my “ Büchel Micro Lens ST ” which can be recharged by USB. Supports just needed for the top slide.
You created a nice 3d lithophane and need a backlight for it? Use this LED PUK backlight stand for LED lights up to 75cm/29,5 inch diameter and 3cm/1,18 inch thickness. Printed with supports in PETG on a MK4. You can find the LED Puk here…
This is simple Galactic Empire Logo with recess for lighting. I didn't find what I need and make it. There is a hole for wires at the bottom of the logo. The file mount is designed for a tight fit with an 11mm hole. I'm used WS2811B 1…
Due to the war in my homeland, millions of Ukrainians are left without electricity. I made a circuit that can be powered by any batteries and is 15% more efficient than 5/12v LED strips. The design of the flashlight can be arbitrary, but…
I like building led lamps, and so i decided to modify a 10w led floodlight to make it like a work light with a stand and all . there are 2 versions of the housing , one with premade holes and one with no hole , in case your lamp has…
This parts are intended to be used as replacement for the dummy parts on the ActionBikes brand, Willis Jeep. The retroreflector parts have to be covered with retro reflective material. The Backlight can be fitted with LED lights. You are…
This is a Mount for the Goove TV Backlight 3 Lite Its for the TCL Q7C, 50 Inch, but i think it should also fit bigger versions. Just a bit of support needed for printing and a bit of double-sided tape to fix it in place on the TV.
Can be printed in nearly any material. I recommend dark colors or a color that otherwise matches your existing bezel. Requires small nozzle but I was able to print just fine with PETG on a .4mm nozzle. YMMV Works better with OEM screen…
This is a mount that allows attaching of a backlight onto the ACID Gravel Carrier . The mount itself is fastened using cable ties, as shown in the pictures. The uploaded version is one centimeter shorter than the version shown in the…
Ford Fiesta MK5 / 2002 TPU Breaklight Cover inside of the Trunkdoor
Voron Cube Desklight - Mini Edition Smol = Cute! and this remix is no exception! from Voron came the Cube Desklight! from DriftRotor came the Cutesie Mini Edition! now you too can print and build your own Voron Cube Desklight - Mini…
small and simple clip for bicycle backlight from decathlon https://www.decathlon.cz/p/predni-a-zadni-svetlo-na-kolo-st920-usb/_/R-p-313171?mc=8576352
This is for the following product from Action: https://www.action.com/de-de/p/3217439/led-pixeltafel/ I didn't liked the look of the display so I designed a thin diffuser an a thicker frame to make it look like a picture frame. The…
Backlight holder For the Bullitt bike
Just made a replacement strap for my vancouver backlight. It was broken. Probably brittle due to the sun. The replacement part need to be printed in TPU. TPU is kinda picky. It can be a challenge to get a usable result. If you have a…
Designed for use with outdoor floodlights like this (available in various wattages): https://www.amazon.com/gp/product/B0CCND2TFV?psc=1 These lights are designed for mounting on a wall, but they make good worklights when mounted to this…
Very easy to print Use Glow Filament to get the Nightlight effect or simply put a LED tealight in it this is so hard to image that is best to get from the CANON
Der Halter passt perfekt an der Strebe vom Larry vs Harry Bullitt Lastenrad. Innen kann ein Gummi (20x10x1mm) zur Rutschhemmung installiert werden. The holder fits perfectly for the Larry vs Harry Bullitt cargobike. A rubber band…
Christmas Advent Calender I made this Christmas Advent Calender for my kids. You will have to glue the stairs together. Each stair step stands for one day. If Santa reaches the tree its Christmas Eve. Glue the "Stairs_Wood_Connector" on a…
Mounts for lightbar or worklights to be mounted on a ROP with approximate cross section dimensions of 53x79mm (or nominally 2x3"). These worked fine on my gen 1 (2010) JD 3038e tractor. Clamps will show a gap after being tightened around…
Completely redesigned this cloud lamp around a “6.56ft Govee RGBIC Strip Light 2 Pro with Matter” light strip. Expensive, but I wanted the brightness and addressable LEDs. Requires gluing the face pieces and optional m4 knurled threaded…
