Counting matching models…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
This is a very simple, super fast to print z-axis vibration damper for the original Prusa MK3. The Z-top parts for the MK3 are closed at the top. Still the hole for the z-rods on the top parts are much larger than the Z-rods: this is as…
New version, more improvements (for some pictures scroll down): 100% print in place, NO SUPPORTS!!; Easier to print dovetails - more area to grab on the build plate!; Zip ties no longer optional nor required; Better tolerances - Easier to…
Redesigned the hook so it would print better then his version. Now you can you use it also for hanging towels. hook for awning rails hook for tent rail In addition to this, see also:…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
UPDATE: My pattern didn't work properly so the measurements aren't accurate, just use them as a rough guide Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on…
The bronze dragon was cast in 1842, in front of Duyet Thi Duong gate, Hue Imperial Citadel.
Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…
Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…
The first design (dummy) was created by Paperpilot and was discussed here . I have remixed the design from Warc , adapted it and made it ready to print. Thank you for the work. I moved a few things around until it fit for me. From that I…
Update 2nd March 2024: Version 2.0 is now available , based on very useful feedback, thanks all. stl files can be dragged into any slicer for gcode. STEP files and SolidWorks files are provided if you want to add your own holes (for…
Print 0.2mm layer height. No supports are needed. 10% infill.
Player board for the Dune Imperium board game inspired by the Shai Hulud mural from the movie. Presented are two 3d models, the smaller one is perfectly sized for the Prusa mini which I own, and the bigger one with extra spaces for the…
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…
Remix of Low Profile Prusa Mini Anti-Vibration Feet by Alexander Þór . This is the most effective upgrade I have made for my printer. Absolutely brilliant model. The printer wobbled after installing these dampening feet, so I modeled…
Very nice and minimalistic car silhouette of a BMW M2 Competition. You can resize it as you want.
After the Garmin Tempe is inserted, attach the holder to the backpack or jacket with paracord through the eyelet. Through the paracord the sensor no longer falls out. Version 2: Accurate fit More air slots for better measurement values…
Temp of nozzle is the main cause of stringing. Print this gcode before trying other adjustments. It starts at 220C, and automatically decreases 5C after each 5mm increments, ending at 180C The picture shows the results when filament is…
All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
I designed this calibrated espresso tamper to deliver precisely 30lbs of pressure when the handle cap is completely compressed along the hexagonal running shaft of the base, though the pressure you achieve will vary depending on which…
Metric and Imperial Hexagonal keys cases. You can fit 13 metric keys from 1.27 to 10 mm and 12 imperial keys from .050 to 3/8 inch
Nice and detailed Wall Art model of the BMW X3 M Competition 2022. Scalable. I accept suggestions for new car models
I designed a Wallmount for the Bosch EBike Charger with 6Ampere. It is a little bit bigger than the other ones (2 Ampere or 4 Ampere). You can use this design for every Bosch Ebike charger Happy Printing. :-)
IMPORTANT! I heard from a friend that his set were loose, and asked him to show me. Turns out he was using an entirely different set of screws. This was dangerous on his part. Remember that using power tools can be dangerous, even life…
Creé este objeto para mi esposa en nuestro aniversario. Además de ser un divertido rompecabezas de seis (6) partes , transmite un lindo mensaje. No requiere soportes. Utilicé PLA y puede ser impresa cada parte en un color diferente o en…
A door for Fantasy Flight's Imperial Assault board game, set in the Star Wars universe. You can slide the game's cardboard door token in this model's slot and use it in your game. There is also a multi-part version that allows one to…
English below. Halterung für eine Taschenlampe mit Durchmesser 30 mm, und Lenkerdurchmesser von 31,8 mm (1 1/4 Zoll). Es wird zusätzlich benötigt: Senkkopfschraube M3x30 Senkkopfschraube M3x15 selbstsichernde Mutter / Stoppmutter M3, 2…
base for your rum /whisky /vodka bottle. I used round LEDs with a diameter of 70mm.
Temperature & Humidity Meter Stand 360 degrees Temperature & Humidity Meter Holder 360 degrees for Prusa i3 MK3, MK3S & MK3S+ https://www.amazon.co.uk/dp/B07QH1MYPY?ref_=cm_sw_r_apin_dp_DXMTDF2ASNR0AGST3CJ2&th=1 Filament: PLA or PLA+ or…
A mounting solution for the Hobbywing Max10 SCT in a Traxxas Stampede 4x4 with the stock chassis. This design has 3 parts; a base plate, a step (to keep things level) and then a holder that keeps the ESC and switch in place. 2 x M3 6mm…
Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.
I designed this connector to fix together two male jumper wires similar to this: It is very helpful for small circuitry. Usually when you don't want to soldier a pair of wires to a micro controller, you can connect a female jumper wire to…
Filament: - JAYO - white - PLA+ Objektgröße: ca. L:B:H in cm Drucker: Prusa MK3S Düse: 0,4 Schichthöhe: 0,2 Infill: 100% Stützen: keine Druckzeit: ca. 11 Stunden Die Merkur-Deckenlape, sollte mit dem 39,00mm Haltering passgenau ineinander…
mini puzzle rompecabezas portátil
Housing build for Adafruit MCP9808 Temperature Sensor. With attached OpenSCAD file everything is customizable, especially size of screws to close and size of opening for connection cable. But can also easily adapted for other breakout…
The Original Ridgid TS3650 Tablesaw is great except for one issue. The fence. It never stays square to the blade. This is because the little bumpers under the fence have very little surface area to clamp to the rail. I increased the size…
Einbauhilfe H7 Led Lampen mit Metallspange Audi/VW
I made a tamper for a moka pot with a diameter of 61mm. I included the Fusion 360 file if you want to edit it to fit your needs and desired diameter.
Swimming pool water temperature monitoring needs a sensor whitch musnt be in contact with the water. Threfore you have to use a shaft, where you put sensor probe in. I made one for you. It has stadard outher thred G1/2 and also metric…
A simple and functional stand designed to hold a small temperature and humidity sensor at the perfect viewing angle. The model is split into two pieces to ensure clean printing without any supports — just print both parts, add a small…
Print on its side with snug supports only for the hooks in the back. You can also add 8x3mm magnets if you would like.
Da ich mehrere Fahrräder habe, hab ich mir das Modell erstellt. Ist für eine Klic HP (high pressure) Luftpumpe. Durch den kleinen Schlitz hab ich ein Stück Klettband zur zusätzlichen Arretierung gezogen. Gedruckt mit PLA 15 % Infill…
Modeled after the original AC temperature control slider knob on a 1990 First Gen Dodge Ram Cummins Turbo Diesel D250. Very similar in size and shape to the original. I couldn't find anywhere to buy a replacement knob as this is…
Remix of @Oswald 's squash ball feet V5 (slimmer one). This design changes the look to be hex and more chonky. Used parts 4x PERFLY two yellow dot squash balls from Decathlon (one for each leg) My print settings PETG 0.4 nozzle 0.2 layer…
Incluye un marco para facilidad en su armado. Espero lo disfruten. Por favor publicar sus impresiones, serán de gran apoyo.
First Version of the bin for my MK4. Fits on the right side of the printer in between the squash ball dampenerl.
Die elektrische Luftpumpe bis 25 psi hatte keinen Adapter für meinen Duotone Wing. Ich habe einen konstruiert und gedruckt. Er funktioniert prima. Vieleicht kann ihn ja der eine oder andere auch gebrauchen. Gedruckt in PETG oder PLA. Die…
My printer is on an old, wobbly table. The vibrations of the stepper motors were transmitted throughout the house before my small absorbers were placed underneath. These dampers redirect all vibrations into the upper wall of the…
Prints in place. Only tested with silk pla on an ender 3 neo. Print with supports on build plate only. When printed it may struggle to spring if this happens simply get a craft knife and repeatedly score the stuck section until the…
Halterung für eine Wasserspenderpumpe (5-Gallonen Flasche) um sie direkt an der Matschküche zu befestigen. Der Schlauch kommt dann in ein Kanister, Fass oder Eimer. Mount for a water dispenser pump (5-gallon bottle) to attach directly to…
Humidity and temperature sensor box without screws. A simple and easy solution as a replacement for the original temperature and humidity sensor box. Sensor:…
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An ECM tamper can be stored in the device. In the back, there are two recesses to add fabric pads for proper alignment and to create a…
Hier findest Du alle speziellen AXA-Lampenhalterungen für deine Fahrradgabel! 🚲 Die Halterungen unterscheiden sich zum Teil in der Befestigungsart und Bauweise, wie die Fahrradlampen 💡 von der Firma AXA am Fahrrad angebracht werden…
Simple volt ampere meter to debuging voltage and ampere while doing your electronic engineering hobby. Another material needed: 1x 5mm bolts or M5x12mm bolts for the Arm (You can change this up to 18mm length) 1x 3mm bolts for DC socket…
Temperature and humidity sensor holder with a stand. Designed to be used alone or with LEGO Minifig Hexagons . Printer configuration: 3D Printer: Elegoo Neptune 3 Pro Filament: eSUN PLA+ White Slicer: UltiMaker Cura Resolution: 0.2mm…
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
This is a 38mm x 38mm standoff for a small temperature controller board to give it a smooth surface for use with double-sided tape or adhesive. Specifically the HiLetgo W1701 12V DC Temperature Controller . Designed for M4 nuts to be held…
Replacement for the airbag cover placed inside the cabin model year 2006+
Recambio bumper para rc XPRESS FM1S. Imprimido en PETG con cuatro perímetros y relleno 15% giroide. Colocar soportes en la parte donde se monta con el chasis del coche. Replacement bumper for RC XPRESS FM1S. Print in PETG with four…
Wenn es nicht ganz funktionier,dann etwas abschleifen
Namenslampe Leya Layerhöhe 0,2 mit Kabeldurchführung
A custom holder to hold a Goolrc 60a esc that screws into the four screw holes in front of the rear shock tower in the chassis, it is a snug fit do it won't fall out. the little slots in the side are for a zip tie to go around and hold…
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
My trophy design is centered around a computer mouse that I have used as a representation of Computer Aided Design, (I decided to use a mouse because I felt that a keyboard or PC tower, etc. wouldn’t be as visually pleasing). I wanted my…
Zrobiłem niestandardowy przedni zderzak do Babyape 2 w DarwinFPV
Ergonomic coffee tamper for espresso machine 50mm base & knob diameter. Fits perfectly in hand made for 50mm brewers
Temper station 58mm E61 groups fitting on WECK jar which I use for coffee cookies.
Recommended print settings: Material: PLA/PETG Layer Height: 0.20 (SPEED) Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Perimeters : 5 This design is a replica of some small plastic pieces that came with…
Air backdraft damper for 110 mm pipes with an inner diameter of 103.8 mm. Suitable for inclined pipes or vertical pipes pointing upwards. It is not suitable for strictly horizontal pipes, as the flaps will not close automatically. (A…
My Beatbot iSkim 2026 kept getting stuck on a shallow step in my pool, so I designed extended bumper/legs that attach onto the robot's existing legs to add clearance and stop it from beaching itself. No modification to the iSkim required.…
Little Gree Army : Princess Bride : The Bad Guys : Humperdinck, The Albino, Six Fingers.
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Working with PETG on a Bambu X1, I needed a temperature tower with G-code to work in Bambu Studio. The general PETG presets work, but I want to explore faster prints. This temperature tower originates from the work of Tronnic and Kryštof…
Dimensions Length Width Height 1:10,000 scale 160mm 103mm 56mm Version Appearances Ship Stand Imperial I-class A New Hope, Rogue One print_sw_isd_ISD_I.stl print_sw_isd_stand_ISD_I.stl Imperial II-class The Empire Strikes Back, Return Of…
The Imperial Star Destroyer from Star Wars in kit card form. One of the most iconic ships in the Star Wars universe available to print and assemble. Contains 23 pieces that fit together to form this amazing ship.
This is a simple yet versatile parametric 90 degree bracket. This bracket can be re-sized for virtually any need via the OpenSCAD parameters. The bracket can also be set to 3 different styles; Normal Bevel, Low Poly, and Extra Low Poly.…
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Corner bumper prints without any supports. Use a hard TPU if possible but even some regular PLA is better than nothing. If you have adhesion problems use a brim. Use some double-sided tape to attach.
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
A simple, but carefully designed test model for tuning Small Area Flow Compensation in your slicer. A companion spreadsheet is included to assist in manipulating the Flow Compensation model. Original post-processing script by Alexander T.…
Rather than setting layer temperatures manually for a temp tower, just include one line of G-custom code in PrusaSlicer's “before layer change G-code" section to do it automatically. You can use the attached .3mf file as a starting point…
Since I could not find the ideal temp tower that meets my expectations, I designed my own. Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the…
This is ruler Measures in both Metric Centimeters and Imperial Inches. As I live in America I found myself needing a ruler in inches (Even though we all know that Metric is the superior unit of measurement) while I could only find ones in…
A simpel fast and easy to print trophy award. No supports required. Looks great in metallic colors.
Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed…
Desiged this tower in freecad after the model of already existing examples
This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates. Here you can see a video about the project includin an…
Here's a standard 7C trumpet mouthpiece! It works pretty well. It's obvious when playing that it's not the same as a metal one, but it gets the job done. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter…
