Counting matching models…
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing. You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM…
Description This is a mod to make your printer quiet and still be symmetric with a nice outside shroud to cover everything inside. This design is intended to be the one to upgrade your Ender3 V3 SE from start: works on stock Ender3 V3 SE…
Modular and Iterative Design Focused Muffler / Silencer for Air Compressor Intakes: This is my design of a muffler for my air compressor which uses ½" threaded muffler components. In tackling this project, I reviewed several other…
I recommend printing flat, as the neck is a weak spot that could potentially break in the exhaust.
I got the Mod Shot Timer, and while its loud buzzer is ideal for the range, it’s a bit too intense for home practice—especially for my pets. This compact Muffler, printed with TPU, helps tone down the sound, making dry fire training at…
NOTE: This is compatible with standard rubber hose connectors (default 22mm, but it is customizable). If using the Resmed Airmini, or other travel CPAPs with non-standard hose connectors, an adapter will need to be used. Introduction…
Printable muffler for Allen-Bradley 855HM series sealed annunciator/alarm horns. These horns are designed and intended for industrial environments and have a range from 107-119 db and can be too loud for some situations. I designed this…
Removed the blade guard from the model for less air resistance, adjusted the thickness of the duct a tiny bit to avoid crashing and belt rubbing. You can use the stock phillips screws for the faceplate or you can use these M3 x 14MM…
-Added a version with a 5.5mm deeper filter compartment in order to add active carbon filters -Added seals holder -Added two 'less supports' versions with the middle strip removed, the filters are supported by a thicker lip. Many thanks…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Ich habe den Muffler etwas flacher, kürzer und schmaler gemacht. Er wiegt jetzt weniger als 200gr. Außerdem habe ich kleinere Magnete (9Stck. 6x2mm) verwendet (…
The fit is meant to be snug and may require a bit of force.
Created this simple and easy to print model to muffle the sound of my guitar with a 100mm hole. You can add anything in the hole to muffle even more, i added some cork, but you dont have to I suggest printing it in tpu to avoid any…
Remixed CPAP holder for panel (4mm) with Voron cut for use with Xiaomi-Roborock Nidec vacuum blower. https://github.com/condottab/Roborock-CPAP This is version for Monolith 5 mm rear protruded panel. You will need to adjust for default…
I wanted a rear exhaust that worked with CPAP and also had a HEPA filter + carbon pellets. This is my solution to my own problem. Please let me know if you have any troubles printing this model at all. I haven't tried this design out for…
I updated this model to use M2x10 thread forming screws. This is completely a personal preference modification. If you want a full muffler and exhaust system please check out my page as it has all of this. Full Exhaust System:…
This is an ongoing project for a set of adapters that will assist in the attachment of a ½" NPT thread pneumatic muffler to various sizes of paintball markers and barrel kits. I will be adding more barrel adapters as time permits. Please…
NOTE: This is compatible with standard rubber hose connectors (default 22mm, but it is customizable). If using the Resmed Airmini, or other travel CPAPs with non-standard hose connectors, an adapter will need to be used. Introduction…
Created this bracket to use with OSSUM Jeep muffler ( https://www.thingiverse.com/thing:2293988 ) on my Barrage Category: R/C Vehicles
prévoir isolant (laine de roche, autre) glue capot pour le kit biqu capot normal mettre isolant également dans le compartiment moteur remix autorisé pour vos voron et vzbot 0db
Pneumatic muffler which reduces exhaust noise on air lines by using dense infill. Adjustable for performance by changing infill settings. Has wrench flats but does not need to be installed very tight, it's recommended to just hand…
Inspired by similar solutions, I made a magnetic version with 4 magnets 12x6mm I drilled holes in the original back plate, at my discretion the whole thing is made of petg, the torch broke off because I made it without a chamber, but it…
Overview: I've been making a few modifications for the grills used by Mammoth-3D CPAP Muffler. I decided to compile them all in one place and to also include some future modifications I am planning. Details: Carabiner Grill : This will…
This is the same muffler designed by VzBoT but modified to incorporate TPU gaskets to further reduce noise. I used eSUN TPE 85A . Also, eSUN TPU 95A can be used, which is a little harder but easier to print. Included the modified STEP CAD…
I liked the idea and want to create a remix. clicky pins and curvy walls Update June 15, 2025: @Katarn pointed out that the heat outlet vents were blocked in my design, so I reverted to the original pins Update July 12, 2025: I made a…
A muffler for your piezo buzzer. Signifigantly drops the decibels of the piezo buzzer output when stuffed with foam. Needs minor adjustment to ID of circle opening for a closer fitment. I needed to wrap my piezo in tape to get the proper…
Fan Silencer for the New H2D This fan silencer is designed for printing at a 0.16 mm layer height without supports. It should work with any layer height, but supports may be necessary for the four screw holes. For installation, you will…
****UPDATE 2**** I included another STL with the air outlet moved over and away from the poop shoot for those that are enclosing the the poop shoot. ****UPDATE**** ****Please check last pic on where you do NOT glue magnets in as these are…
Chaned the magnet hole for 8X3 mm mangets. Filter I use: https://www.amazon.com/dp/B0782T7L6P
The original model helped, but it will still quite loud, so I added a bowl at the end of the “inlet” tube a few baffles to further reduce volume. It seems to have made a significant difference. The cutaway is for demonstration only. The…
This is a ½" NPT air line muffler. I haven't measured decibels, but from what I can tell, it cuts the sound by about half. I used it on an air compressor auto drain running at roughly 150 PSI through a ¼" line, and it handles that with no…
Best with TPU or flexible filament. The rabies tag makes a lot of noise when the dog shakes. And the edges get pretty beat up over time too. I made this to muffle the noise and protect the tag, especially now that you can get 3 year tags…
I wanted something less complicated than the existing models I found to help me tame the CPAP beast noise levels. I came up with this idea that installs over the intake port inside the chamber (I built my Vz from a Mellow kit). Requires…
This is a muffler for a vacuum pump. It has 1/2" male inlets on either side so that it may connected inline with the pump output. It is based on the design of this thing . When printing you should disable internal supports and orient it…
This is a box that can be used (filled) with activated charcoal pellets to filter out TVOCs. It fits into the Elegoo Centauro Carbon HEPA Filter / Muffler from @Mongrel_1165369 which you find here:…
Generic Disclaimer: Most aluminium tubes are not sized very precisely (at least one of mine were), so the models here have been adapted to fit the tubes that I bought. You will probably need to resize the model (for the 3mf-files) or…
All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…
A set of ducting pieces for the Elegoo Centauri Carbon. Allows the silencing of fans and allows connection of ducting for external venting. Pieces are pushfit. Muffler drops case fan sound level by up to 10dB at source. Includes; manifold…
The original muffler works, the original hinge works, they do not work together. This remix allows these models to nest together so that both Elegoo Centauri Carbon mods can be used at the same time.
Filter/Muffler for Elegoo Centauri Carbon for people with 10x2mm magnets
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
I just changed the magnet used to “12x5x2” (4.5x11.5x1.4)
Simply 2 form fitting plugs for the "With holes" version of this silencer, to make it as quiet and retain heat like the “no holes” version of the file,, no need to reprint if you've already printed the 1st version.
3D Printed Aux Muffler There are many designs for muffling the sound from the auxiliary fan. However, none of them fit with the HEPA filter that almost everyone is using. So, I designed one that fits properly. Keep in mind that you cannot…
This is a remix of @JakubBohacek_3528557 model. It is an aux fan muffler for the centauri carbon that fits with @Mongrel_1165369 hepa filter model. I printed the original aux fan muffler and it didn't fit. It hung of the side of my…
I wanted to muffle the sound for the aux fan intake. I replaced both auxiliary and case exhaust fans and that helped but wanted it quieter. So, I used Mongrel’s design and remixed it and came up with this simple idea and it works great.…
To be printed in soft material like TPU, it's 0,4mm thick, you can print two layers 0,2mm each. Works well just printed after the muffler and applied on top, like I did. If you haven't printed the muffler yet I'm also including a gasket…
Replacement parts for lost or broken One-Touch muffler knobs and bases. PETG recommended.
Replacement parts for lost or broken 70s TAMA muffler knobs and bases. PETG Recommended
A simple cover to limit wind noise in Bose A20 microphone for open doors aircraft flights. May not be super comfortable on the mouth but is extremely effective at cutting parasite noise created by the wind hitting the microphone on open…
This is an exhaust tip for a Little Tikes Cozy Coupe. It attaches using doule sided tape for an easy install.
Just uploading this in case it's useful. I designed this as one of my first experiments with FreeCAD in 2023. I'd also upload the original document, but unfortunately it won't even recompute properly with current FreeCAD releases. I think…
My muffler started to make sounds every bump. Realized that the tinfoil made nuts that fastens the heat shield above the muffler already rusted and gone. Made these that can be easily installed with a 15mm wrench and in the center used a…
Not sure how many people are looking for vacuum mufflers on Thingiverse, but if you are, you've come to the right place! I somehow managed to lose mine so I designed and printed a new one. To my surprise, it works pretty well! The airflow…
Added fitment for climate line hose. This does NOT enable the heating, but lets you use the hose you already have. Picture is of the prototype, which I'm still using so wont be printing a new one just yet.
A simple remix to allow for the use of the HEPA muffler mod for the Centauri Carbon.
Printable muffler for Allen-Bradley 855HM series sealed annunciator/alarm horns. These horns are designed and intended for industrial environments and have a range from 107-119 db and can be too loud for some situations. I designed this…
Cpap muffler i made to fit my own custom build. Maybe some of you can use it for your own build. Has not been tested on a printer yet but i dont see why it shouldn't work. Here are some of the thing you need to order for it to be built.…
Redesigned the original part to work with 6x3 Magnets. 10 Magnets required.
-Added a version with a 5.5mm deeper filter compartment in order to add active carbon filters -Added seals holder -Added two 'less supports' versions with the middle strip removed, the filters are supported by a thicker lip. Many thanks…
Hey my good CC1 owner friends, I remix the glorious Centarui Carbon silencer mod to those who already has the Uncle Jessy filter mod, and do not want do change to another one and still wants to improve a little the CC1 intake fan noise.…
After getting my SOVOL Zero I noticed that the chamber fan was very loud so I made a muffler to quiet it down a little bit
Found Mongrel's design for the original CC, couldn't work with the Mesh very well, so redesigned this from scratch! This was my first model, I'll take any criticism. Problem: The stock CC2 exhaust composite filter only covers half of the…
Modeled after StickAtSea's design, this is meant to be printed in 0.4mm TPU. I have not yet calibrated my TPU, still doing some other projects, but the design is a simple 0.4mm slice of the original model's base, with only the holes for…
Just take out the factory one and insert the printed one. The chamber walls are more rigid, the first two have bypass holes. I thought the accuracy improved with this, and the sound was almost unchanged.
This tool provides extra reach and leverage for opening chainsaw oil and gas caps. I designed it because, when using an Alaskan mill jig with my Echo chainsaw, the oil cap is especially awkward to reach. One careless move can put your…
/!\ Not for the actual robot!!! /!\ Muffler to be put at the air outlet of the dock. Two tabs broke on my part while fitting it but some looped duct tape hold it really nice in place Print the pad first, then the two others. The file Part…
/!\ Not for the actual robot!!! /!\ Muffler to be put at the air outlet of the dock. Print the pad first, then the two others. The file Part 4 is the baffle that is fitted into the muffler. I printed it without any bottom nor top layers…
These plugs fit a 2022 Honda CRF250F and CRF125F Muffler so you can power wash the bike without flooding the exhaust. I printed them in TPU with 4 perimeters which may be slight overkill but I didn't want them to break in the muffler.
fiat universal seat belt muffler Универсальный глушитель ремня безопасности Фиат
This air compressor muffler was designed for my commercial air compressors automatic dump valve. It turns the sound from startlingly loud to a reasonable hiss. Print in PETG at .2mm set 4-6 Perimeters. Set infill to Gyroid and about 10%…
This reduces the likely-hood of stray filament being sucked into the electronics, prevents uneven bed heating, and slightly muffles the noise of the fan. Print instructions Supports are needed in center section, but not in muffler fins. I…
extremely quick and dirty spacer design that stops the neo 3 link faceplate blocking the speakers and hurting the onboard sound- as a bonus, this pushes the sides inwards slightly to also solve the light leakage you get through the…
Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…
I liked the previous version, but most people dont have oddly sized magnets on hand. I created this one that uses two stacked 6x3mm magnets. Thats 6mm round and 3mm tall, stacked on top of each other. The hole id 6.5mm round and 6mm deep,…
I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…
I wanted to use the 12.5*6mm magnets I have on hand. Very powerfull magnet so need to be placed 2mm away from side panel. No screw needed anymore. Magnet groove is deep to avoid any problem with hotend during printing. Put printer on…
This is a muffler that reduces the sound from the G-Belt. It uses the existing 6 screws mounts over the top of the existing plate. This video allows you to hear with and without the muffler. The small print uses only 4 bolts. The large…
Bambu X1 AMS Hub Exhaust Muffler / Fan Silencer, printed mine at 50% infill PLA, screws are M2.5x10mm and M3.0x12mm Want to buy me a Slice of Pizza? http://buymeacoffee.com/TheTexMech
I justed wanted to have the Bambu X1 Exhaust Muffler / Fan Silencer with the BambuLab Logo. So I added the original STL with the Logo Parts. It's a 3MF File which can directly printed. You just need to configure the slicer objects…
Printed using arachne wall generator .16 mm optimal layer height 15% infill gyroid infill
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
I used similar chamber design to that of a car muffler to reduce the noise from the chamber fan. I used other models to get good magnet locations, so I credited them for a remix. I used 6x3mm N52 magnets. There is a very noticeable…
I have a lot of 8x3mm magnets so I modified the OurAngryBadger model in order to mount the muffler only with magnets. Print / Install Instructions: I recommend printing with 4 walls, 6 top and bottom layers, and 0.16mm layer height on…
Works best with Neodymium magnet grade N52 Just filleted the inside to make it easier to print without support Original file : https://www.printables.com/model/350953-bambu-lab-chamber-fan-muffler No support is needed for this print. But…
the logo in the original is set inwards for some reason making it an overhang that looks terrible from what i can see from the make pictures so i just made it flush with the build plate i also dont really care for mounting it with screws…
Literally just a 6x1mm cylinder. Place it in the hole before you pop your magnets in. Print at 0.2mm height so you get a perfect 1mm after 5 layers.
Latest Version I recommend N52 Grade Neodymium magnets to make sure they stick well
This is an attachment that will reduces the noise coming from the exhaust port. Best to print port with small side down with brims to hold it down. I also printed with no supports. The reason for small side down is, if large side down…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
A case to support a HEPA/Carbon filter on the back of the Bambu Lab Carbon X1 using magnets. While this is my original design it was heavily inspired by the two models marked as remixed from. Bill of materials High performance filament…
Couldnt find good sources so this one uses the same Filters as the popular BentoBox Air filter. This one redirects the air wich will probably affect performance of the exhaust fan a bit but probably way lett than the filters already do.…
