459 models
Self contained travel version of the classic Solitaire game. Lid has the name “Solitaire” for MMU printers. 32 pins needed to play. The 33'rd is a spare..
Print approx. €9.55–€11.67 excl. taxPreliminary estimate for one variant
I've added a STL folder, Alternative, with slightly larger inner diameter (0.4 mm larger) for Mount and Connect. You may use them instead of the original tight fit. Look at this 30 sec video (Don't know how long the video will be there,…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
A bolt-on quick-release mount for the Cygolite Dash bike light to replace the stock rubber strap that would not keep the light in place. Trail approved! One-handed quick-release! Minimal footprint! Easy installation without removing…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
This is a version of the well known (Peg)-“Solitaire” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
A simple, easy to print, “Peg Solitare” style brain teaser. This model is an easy print which requires no supports. The model is also available at OnShape . I've also provided a PrusaSlicer 3mf file which contains all of the necessary…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for PETGSource material: PET
Finally you too can keep your tables clean with a true small scale Neapolitan style pizza! You can also print a cute reproduction of a stack of pizza boxes that, beside being the perfect container to keep a set of 6 coasters always…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
This is a replacement top clip for a Cygolite Metro handlebar bracket. The plastic on my original clip broke so I designed and printed this replacement part. Note that this is only the top section. It does not include the clamp that…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Ecuadorian Tolita Tumaco Jaguar Ornament.
Print approx. €8.08–€9.88 excl. taxPreliminary estimate for one variant
Game Rules Preparation and Objective The game is set up so that pieces fill every hole except the middle hole. The objective is to remove every piece except one, with the final piece ending up in the centre hole. Solitaire is played by…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Remix (thinner monolith, better lower part with shield) of original Monolith by Adam Stansbury. Included OpenSCAD that uses original model as include and performs the necessary modifications on it.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
Nose ornament Tolita-Tumaco : 500 BCE–300 CE An Emblem of Power and Skill in Ancient Coastal America The Tolita-Tumaco culture, flourishing from approximately 500 BCE to 300 CE along the Pacific coast of present-day Colombia and Ecuador,…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
In a small Neolithic village nestled along the fertile banks of the Danube river , two souls, bound by a love as enduring as the stone tools they crafted, found solace in each other’s presence. Their days were filled with shared…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for one variant
This is a replacement for the small hook that comes with your BioLite SunLight 100 lamp. I recommend printing with 100% infill and 0.15mm layer height. I´ve printed it in PETG (because the lamp is intended to hang directly in the sunlight).
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Tone down your super bright Magnate Solitaire for when you need it to write in the car. Now you won't be blinded when illuminated your writing surface. Save your retinas.
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Height: 80 mm Width: 20 mm Enjoy!
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Polovina držáku pravítka řezačky na dlažbu , které je posuvná a odklápěcí, je náchylná na prasknutí odlomení a proto jsem jí vytiskl z PETG materiálu . Vytištěno na ENDER3.
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for PETGSource material: PET
Use 8*3mm magnets
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Tactile image of the Brazil's Northeast region. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Not a fan of the desk hooks I found online since they all fail after a few months so made this chunk to do the job. Feel free to scale and stretch it if you wish so. STEP file included if you wanna make something different with it, enjoy.
Print approx. €9.31–€11.38 excl. taxPreliminary estimate for PETGSource material: PET
Thread a stiff wire or piece of nail through the hole and glue it in place, then hook the handle into the aspirator. Use the most durable filament possible. Brevetti MONTOLIT Battile elektrická vibrační přísavka od 5 797 Kč - Zbozi.cz
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, reading "Perpetually Politically Incorrect" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
Overview My adaptation of cryptic calendar for 3d print. Original project you can find on on youtube. Instruction Monolith has two version. First version of calendar (yellow one on photos) are colored from bottom so you can get additional…
Version of the Shade Vertical Foregrip with a monolithic body. Functionality, design and usage are identical to the original design just without seperate side panels so it prints in only two pieces. Print Settings Printer Brand: Creality…
This is the Monolith Dice Towers, three spaceship style dice towers. Its a huge model, with internal helix paths for the dice to roll. It comes with hinged trays that fold open. There are three versions: Triangular Monolith (160mm in…
Hatshepsut Sphinx at The Metropolitan Museum of Art
Bring a touch of gaming nostalgia and feline charm to your desk! This adorable kitten figurine combines the iconic The Sims aesthetic with a modern gamer vibe. The best part? This model is monolithic , meaning the cat, the headset, the…
I've remixed this nice model to convert it into a nice planter inspired in the chids tale “Manuelita” (He's Bartolito) It was printed on a Artillery Hornet. with prusa slicer 2.5. (using prusa profile Hornet 0.16) Flament : PLA 3n3.…
I broke my 10th voron dehubbing tool Tired Made a stronger version, (with very tight tolerances btw, 0.1-0.4 depending on where you look) 🤩 Do you like the design? You can help fund innovations like this! Consider supporting me! Much…
High resolution replacements for War of the Ring nation political counters. These tokens represent Rohan, Gondor, the Dwarves, the Elves and the Northmen and are inspired by the Lord of the Rings universe. These tokens are double sided in…
Solitaire ring, with stone for impression and direct casting
This compliant mechanism is a large-displacement monolithic compliant rotational hinge, designed by BYU's Compliant Mechanisms Research Lab (CMR) to help deployable hinges on spacecraft be more efficient. What is a large-displacement…
Hand made in Fusion 360, not AI slop I recommend printing this in light colors to try and keep the temperatures down for the larvae, also try and shield it from afternoon sun, morning sun is good, afternoon sun is too hot. 50mm tubes so…
High resolution replacements for War of the Ring nation political counters. These tokens represent Sauron, Isengard, the Southron and the Easterlings and are inspired by the Lord of the Rings universe. These tokens are double sided in…
Meet the most explosive addition to your garden: the Demolition Gnome . This little guy doesn’t plant flowers—he plants dynamite. Some supports needed, organic type works great. Happy Printing!
An (experimental) A4T/XOL carriage for Monolith Gantry SCALE THE CLIPS IN Z ( in the slicer ) TO GET THE CORRECT CLIP FITMENT Information to find ideal height is found on the main Trinity Read.me , under “assembly” Uses the “universal…
------------ You can now buy this stand from RockerGaming on Esty. ------------ My version of GameCube controller stand. It utilizes the unique center "hole" in the controller design for a monolith design. Velcro on the controller cord…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The enclosed design includes…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
This is a work in progress The project started as a concept for a single print unibody open chassis. As I met the limits of my Prusa MK3S, I realized it was not possible and broke down the design into parts. The SFX version backplate does…
After the Fracture split Lumière from the rest of the world, an enormous monolith with the glowing number "100" on it appeared on the northern end of the Continent. The year this event took place is retroactively known as "Monolith Year…
Here’s a little something for fellow Expedition 33 fans. A digital 3D-printable Glowing Monolith Book Nook . Think of it as a tiny slice of the expedition tucked quietly between your books, humming with that familiar yellow shimmer.…
Needed something to model, updated it to get it working. Will revisit again in the future to put some text on it. Print vertically on a raft I had to change the sound hole shape to prevent stringing 1 hour print at high quality 75% scale…
Clair Obscure Expedition 33 Monolith Music Box Replica from the monolith set. Finally perfected the print profile for the .2 nozzle print. The other 3mfs worked but were more sensitive and prone to failure. Fall off the bone supports.…
By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only Merchants with an active License may print & Sell FatesEnd items. Discover more…
étuis de protection pour airpods 4
Remix of the Shade Vertical Foregrip by LoneWolf052 with a monolithic body and the slim-top rail design for low-profile/non-standard Picatinny rails. Functionality, design and usage are identical to the original design. Prints in 2…
MONOLITH is defined by a faceted hexagonal volume that reads as a solid, grounded form. Each angled plane catches light differently, giving the mass quiet depth and structural clarity. The geometry establishes proportion and stability…
This is a really fun idea I had a few years ago - a pencil holder / desk organizer with a Superman Fortress of Solitude theme! It works really well and looks great, too. Make sure to print the main part separate from the Superman symbol,…
Model of a coccolith of the phytoplankton Emiliania huxleyi type A, a calcareous alga, based on scanning electron microscope photos. More infos about my work: https://sonnenschauer.net/en/portfolio/emiliania-huxleyi-2/
Since i had issues with the available options, bending wedges or clips.. needing slm printed parts to use the higher tensions you can run with monolith... i decided to design my own clips fully printed that can take the higher tensions!…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Carriage with belt clamps for Archetype for Monolith gantry. I moved away from Archetype to Gustav Railway in the past because the belts on Archetype kept giving me problem (even with other mods). I wanted to go back to Archetype because…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is an adaptor that allows connecting the hose of a Festool CTL Mini shopvac (and probably many other shopvacs) to the suction pipe and floor nozzle of a Bosch Solitaire Sphera vacuum cleaner. The problem is that the Festool shopvacs…
Welcome to Spain's capital! This multi-part assembly can be printed easily in colors even without MMU/AMS, although with it you can achieve even more realism and details. See the assembly instructions further below. Metropolitano Stadium,…
Uploaded new version: Improved fit. I printed mine upside down in PETG. Prints without support.
Stock Voron/Monolith BOM does not include M5x50 SHCS. The original model was a shy too long to use M5x40 SHCS, which should already be on hand. V2-beta changes: Choice to use an M5 T-nut instead of an M5 hex nut to increase contact area.…
This board is designed for 14mm marbles. You can use it with other sizes, or just scale it appropriately. How to Play (1 Player Solitaire) Remove a marble from the center hole. Select a marble to jump over another into the vacant hole…
Printable calibration cube designed and taken inspiration from the Monolith gantry project If the calibrations below come out perfect, you are ready to start your monolith gantry! Features: - Bottom hole fit F695/F698 bearing and the cap…
The model of TMA-1 ( Tycho Magnetic Anomaly - 1 ), a monolith from movie 2001: A Space Odyssey. Model consists of four parts, no supports are needed. I printed everything in PLA but other materials will work. I printed plaque in two…
This is a work in progress
########################## If you are looking for an organizer for Conan (monolith) and the following sets and expansions with sleeved cards, please go to the below link.…
I really liked the concept of Q-less, the game designed by Tom Sturdevant . It's a solitaire crossword game, where you try to use all 12 dice to make a crossword. Unfortunately, the game is sold out online, and impossible to get in…
This is the Monolith Dice Tower, a spaceship style dice tower. Its a huge model, with three internal helix paths for the dice to roll. It comes with hinged trays that fold open. It's part of the Monolith Dice Towers , but with hexagons to…
This model is of Seele monolith 01 from the Evangelion Rebuild series, as depicted below. Caution This is a work in progress and may be hard to print around the Seele logo at the top. You will need a small nozzle, 0.2mm ideally. Please…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Discover the hidden wonders of the human ear with our 3D-printed models of human otoconia! Otoconia are minuscule crystals found within our inner ear that play a critical role in maintaining our sense of balance and spatial orientation.…
Update 8/21/23 : Realized I had the wrongly scaled the DXF and it was 10x size. Fixed that in an updated version here. Just a simple DXF that gives you the dimensions for the Bambu plate geometry. Useful in cutting applications.
TM-200 TNT Demolition Block (Training Aid / Display Replica) The TM-200 is a meticulously designed, plastic-cased TNT demolition block that serves as a realistic training aid or collectible display. This block has been crafted to…
..:: This is a model for single colour print. For MMU model, head here ::.. I really liked the concept of Q-less, the game designed by Tom Sturdevant . It's a solitaire crossword game, where you try to use all 12 dice to make a crossword.…
It combines Xol monolith carriage with dragonburner mount. For MGN12H block and 9mm belts. Added more screws to secure belt clips. WARNING: The middle screw should be the same level as the top and bottom screws; if not, the worst…
⚠ NOTE: Although this model was created with the assistance of AI, I personally print and test all of my designs to ensure quality, functionality, and printability. The images shown are real photos of my printed model. The Stone of…
Darth Fader for Avolites consoles. I printed at 0.15 with a 0.4 nozzle. I did use organic supports on the bottom of the helmut.
A simple clamping sleeve that is sized 0.4mm wider than the Voron/Monolith pulley dehubbing tool. The model length (Z length) is 39mm but I actually printed it 25mm long. I also enlarged the opening because my initial print (0.2mm wider…
English (This translation is computer generated) : Board game for one player involving movement of pegs on a board with holes. Game fills the entire board with pegs except for the central hole. The objective is, making valid moves, to…
BOOOM! Turn support off, but add custom support here: You will also need some string to tie the wrecking ball to the benchy.
Required components and optional add-ons for the Monolith Monitor stand; an affordable, customizable, and extendable monitor stand. Monolith project parts: Cantilever Design Build Guide:…
Board game organizer for Conan (monolith) and the following sets and expansions. Also supports sleeved cards, I use mayday premiums (thicker ones). Kings Pledge Stretch goals/ Collectors Box Stygia Nordheim Khitai Conqueror & Tome of…
Includes: Cable guide clips for the monolith gantry. Front stepper cable guides use m3x20mm aluminum standoffs (5mm od) Fumepack mods for biqu turbo (cpap), triple ecas fittings for mmu and space for an extra layer of 3mm foam tape around…
Photogrammetry scan of the sculpture "The Monolith" by Norwegian sculptor Gustav Vigeland exhibited in Frogner Park, Oslo, Norway. Prints perfectly with organic supports.
This is a model of the space monolith from the scifi movie 2001. The Edges have a ratio of 1:4:9.
Here is an Diffrent Top Gantry for the Trinity V1. Its the Monolith for the Trinity V1. This Gantry is in Testing State. Have Fun :-D
Demolition Man - Alfredo Garcia - 1993 3D printable model.
Just your standard peg-jumping game. All parts print with no supports. Print a single peg and the test hole first to verify part fit. You'll need 32 pegs total for the whole board.
Standard litter scoops were too coarse to clean the litter of smaller pieces, also are too small to allow quick clean of litter box. Bucket is designed to fit the scoop inside it in order to save some space, just put a bag in the bucket…
Doctor Doolittle - Great Pink Sea Snail - 1967 3D printable model.
Small solitaire puzzle to pass the time during this confinement. Print instructions Print 1 corps and 32 pions.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Demolition Man - Associate Bob - 1993 3D printable model.
Magnetic peg solitare I happen to have a lot of 3mm (diameter) x 2mm (height) magnets so I figured I'd use em'. If you have slightly different magnet size, you could start by printing the Peg-Game-Peg and scale it until the magnet fits on…
Update 2021-06-25: Added alternate bases. This is remix of https://www.thingiverse.com/thing:4631883 by tomasotwo. These are 3D banners that replace the cardboard tokens included in the board game War of the Ring. I have split the…
A man with a hat standing in the middle of dark city road. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA HueForge Dark Gray 2.3…
This handle fits exactly into the pipe of a Bosch vacuum cleaner. The other side of the handle is sized like the end of the pipe, so in total, the handle is essentially an extension of the pipe. This is the second part of my adaptor to…
My Small Button on my Toilet was broken, so i designed this Replacement from Scratch and tweaked it in.
Container for a Tubolito S-Tubo MTB bike tube. Tubolito S-Tubo is a super lightweight and small tube for MTB tires up to 2.5". It's my go to spare tube for my on-frame kit, rather than a regular butyl tube. This container fits the tube,…
aprox 55 inches, split for smaller printers, takes aprox 51.3 inches of 1/2 in dowel/rod for assembly/reinforcement. Category: Props
This is a modified version of CloakedWayne's Monolith Bed Fans mod. I split the original design into two single fan pieces, so I could use it with my chamber filter. The A and B parts are different. Don't just mirror one in the slicer.…
