Counting matching models…
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
I share this model to make some delicious onigiri. It is made up of 3 parts, for deep cleaning (with cold water). You can use it as printed or covered with plastic wrap and tape on the outside to fix everything. Personally I use it no…
Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka. This is a onepiece version of Sonic based on my multi-part Sonic model that I've previously posted. Since I do not have…
At first many thanks to Conr8r for the Upgraded Modular Hydroponics Tower . I made some addons so you can build your own tower with even more flexability. These parts are compatible with his design. I designed additional shelfs with one…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
Mount for Teltonika RUTX routers e.g RUTX50
Guide - How to perfect your Ironing on PrusaSlicer This is my own Guide of the Ironing Test by NuggetsINC on MakerWorld, but ready for Prusa Slicer 2.9.4 A very simple and detailed guide to test and understand how different ironing…
This tests ironing flow rates, 5%-25%, this was created with Orca Slicer 2.3.2 Feel free to change settings to your liking
Check if every single part have different ironing settings in slicer. Use brim to get everything attached. In X axis you have different speeds In Y axis you have different flow rate Check which one looks the best :) Edit: values are not…
This 3D-printed tentacle animatronic uses four standard servos and a flexible spine to create smooth, lifelike motion. Designed for makers and prop builders, it’s perfect for creature effects, puppetry, or robotics projects. Includes STL…
These models are part of the Big Plans 3D Printer System: https://lilmikey.com/3DPrinterSystem.html These models comprise enclosures for control boards, mosfets, LCDs, etc as part of the Big Plans Printer System. LCD Front - Front panel…
Do you also love hydroponics, but you drown in substrate? Here is the solution for you! Indoor hydroponics without substrate. This gives the plant even more room to grow and you have to worry less about vacuuming the pellets that fell…
All you have to do is insert the filament you are using et Voila ! testing speed and extrusion for ironing
Kryptonite Evolution Mounting Bracket that fits onto the drink holder. Example bike is a Tenways CGO600. Printed in ASA on a sidewinder X1 with a 0.6mm nozzle.
No supports needed; stock settings should be fine.
Kryptonite U-locks often come with a two-part bracket designed to be strapped to a tube on the bike's frame. On a folding bike like mine, there isn't a good place to put the strap where it won't be in the way or slip down constantly, so…
The dust cover fits perfectly on Kryptonite Evolution Series 4 chain locks. You can either print only the dust cover and keep the original slider (it does fit nicely on it) or you can print the dust cover slider. My slider was not broken…
Ancient Greeks knew about them; the Platonic Solids are fascinating. You can read all about them here: https://en.wikipedia.org/wiki/Platonic_solid These 5 models are hyperbolic shapes of the Platonic Solids. The solid shapes are here .…
This is a custom-designed mount to securely attach a Kryptonite Evolution Mini-7 U-lock to the frame of a KuKirin G2 Pro e-scooter. The basic idea is from here:…
If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly appreciate it! 🖨 Technical Information…
DIN rail mounting plates for the Sovol SV08 stock electronics. To be combined with these clips: https://www.printables.com/model/592735-din-rail-clip-voron-heat-insert.
This powerful heroine from another world is ready to defend your shelf, desk, or display stand! The Kryptonian Girl combines confidence, charm, and strength in one highly detailed figure. 💪 Features: One-piece model with integrated round…
Elevates your net cup upwards to get the most out of the space inside your nutrient solution container. Works best when installed on a fence post setup. I created this with the Kratky method in mind, but could probably be used in other…
This is a prototype avionics bay bracket for 34mm model rockets. The PCB brackets are made to fit a 3x7cm prototype PCB. See this imgur post for details about the build process for the avionics hardware. I designed this to develop a…
By default, this SCAD file creates a stepped lid for a BT80 coupler, using a 3/16" eyebolt and #6-32 rods with a 2" center-to-center spacing. The comments show the design specs, but the parameter values reflect what I needed to use on my…
This mount is very specific to my seatpost but may be adapted or at least give ideas to design your own. For reference, this is the type of seatpost I am using here: Printed with ABS+, but I will probably reprint in ASA or PCTG next for…
Video! Video for v5 EDIT: Added 'v5' - now allows you to assemble the eye without having to put it in the enclosure, then the enclosure goes on with only 2 screws. Much easier to recalibrate, make repairs, etc. Also, updated to use USB-C.…
This is a fully 3D printed upgrade for the waterfall in Life of the Amazonia. I really should sell this one, but I want as many people to enjoy it as possible because I spent a lot of time on it. While there are many fun things that could…
This is a box with 4 compartments openable by a rotation. The dimensions are 15 x 15 cm Really easy to print. Be gentle when closing it, no force needed. The nut has to be loose but tight enough. And it works better horizontaly. Supports:…
A scan of an ammonite fossil. Printed in PLA, it needs a little support. Used eleven grams of filament and took about forty minutes on a BBL A1
My Panasonic NN-ST46KB microwave instructions say it should be at least 10 cm from the wall behind it, for sufficient airflow. But it’s so light that it slides backwards when I press the door-release button. A pair of these spacers slot…
This is a replacement strap I designed for my Kryptonite bike lock after the original rubber one broke. I replicated the geometry of the original, but the flexibility will depend on the filament and chosen thickness. In the photos you’ll…
After printing the hydroponics tower and adapting it to live on a 2 gallon bucket, I needed a way to pass the power cord for the pump that lives in the bucket through the lid without a gaping light leak that would encourage algae. 25x20…
The purpose of this cube is to demonstrate how ionic bonds interact. The cube has holes for 5x2 press fit magnets. Make some cubes with north facing out and some with south facing out and color code them you can easily get a helpful…
Bike rattle reducing spacers for Kryptonite Kryptolok. By adding these rings before the rubber rings it reduces/removes the rattling sound the lock makes when frame mounted and biking.
Крепление для монитора на трубу 25мм VESA 100X100
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
Gridfinity holder for Wera Kraftform Micro Electronics Precision Screwdrivers. The holder is sized so that even the longest screwdrivers in the Wera 05073675001 Kraftform Micro-Set/12 Sb 1 Screwdriver Set will fit. Not sure about drivers…
This button design allows for a clean looking electronics project. The intention would be that there would be a tactile switch on a PCB located directly behind the actuator. The button is constrained so that it mostly translates up and…
Tonies-Holder Print in PLA or PETG, set a pause at the according layer to insert the steel disc. Make sure the hooks are reinforced with 100% infill or as I did it with as many bottom layers as necessary to fill them completely. Best use…
This is a simple 3D printable model of a late 19th century naval monitor warship, based (very) loosely on the Arkansas-class monitors of the US Navy (See https://en.wikipedia.org/wiki/Arkansas-class_monitor ). Self-designated…
I love Kintsugi so much! This is my love letter to the style and I hope you enjoy it as well! Printed and Painted model video below! If you like this design please consider checking out my Patreon where I will be releasing more designs…
This stand holds an electronic screen at any convenient angle. It is sturdy, easy to assemble and print, and folds up for storage. Small sizes can fit in your pocket, and the largest size can hold a tablet. It can also accomodate…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
Build a professional protective housing for your Raspberry Pi 5 with Pimoroni NVME Duo integration. Here we offer you the STL files for 3D-printed housing parts, which have been specifically developed to securely hold the Raspberry Pi 5…
Optimize your setup with the HomePod Mini TV/Monitor Mount, a sleek, easy-to-install 3D-printable holder designed to securely attach to the back of your TV or monitor. This mount allows you to keep your Apple HomePod Mini close by without…
A wall mount for a Panasonic EY0L11 charger that, for some reason, isn't wall mountable as standard. The mount is split into two files for easier printing, a baseplate and the clamping band that goes over the battery charger. No supports…
I previously remixed another users door handle to mount in the bottom panel to lift and access the electronics bay. It was kind of chunky and the insert didn’t fit well so I finally got around to making a new one. I put the logos that…
Ein Halter für den Zylinder in der AP1 2024 der Mechatroniker Prüfung.
This terminal block is designed to offer flexibility and convenience for various electronic projects. While the spacing between terminals is fixed, the number of terminals is customizable, with a maximum of 10 terminals per block. It can…
I replaced the upper attachment from the original model to a simple hole
As I couldn't find a holder that actually fit my (boss') monitor, I decided to remix one :D
With this extended battery for the Lumix LX-15 camera you can shoot up to 6 hours! All models are available in both stl and 3mf formats, in the latter everything is placed in the bed in the best position for printing. Print settings:…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Many of the phone holders for the Hyundai Ioniq 5 either block the air vents or the screen. I designed this phone holder to slot into the unused space between the cup holders in the center console and keeps the phone in easy reach and…
I've been using belt tensioners for both X & Y axis's puller design by fessyFOO rather happily for some time now. I didn't particularly care for fessyFOO's nut design as it's so small and difficult for me to grip, so I was using yac's “A…
Monitor stand having the following measures 210x210x120mm, successfully tested with 24" LCD display. Suggested print settings: - Print speed 150mm/s - Layer height 0.2mm - Infill 30%
Add this charge port highlight for your North American Hyundai Ioniq 5 to make it easier to see the charge port at night, especially with the bright charge indicator LEDs to the right that wreck night vision. Print instructions Recommend…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
Hide bright led when charge door is open. Can stay in place when door is closed.
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
Just added a DIN Rail mount to the middle part for industrial mounting also made some printability improvements Category: Electronics
Separador superior para macbook m1 pro (puede servir en otros modelos posteriores) en soporte vertical permitiendo que se salga el sonido de los altavoces integrados. Sin esta pieza, el sonido queda muy bajo al estar tapadando los…
The original table feet were too slippery, so I drew overshoes and printed them in TPU.
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
you can connect the knomi on any usb port from the motherboard just use the 5v and ground also the uart port can be used here is the motherboard diagram Later Edit 28. November 2024 modified the Knob and the Knomi holder. made them a…
The **FixBox** is the ideal desk-sized organizer for electronics enthusiasts and professionals, designed to keep your repair tools neatly arranged and readily accessible. With its spacious compartments and sturdy 3D-printed construction,…
I needed something on top of my Dell U2515H's stand to give better support for a clamp, so made this simple model. As it is, it works perfectly for my use case, but maybe it can work as a base for your model? Update 2024-12-11: Added…
All the mounts I could find mounted the fan too close to the underlying surface when using the original feet, so I had to design my own.
Level holder for swivel monitor. Dimension of the "bubble" D8 x 35. Double-sided adhesive tape. PLA Nozzle - 0.4 Layer - 0.28
A perfect way to simply grab Sonicare 4100, plop it into the enclosure and go, no need to remove your brush head! This was styled similar to another remix of the rugged box but due to size requirements and differences in the brush handles…
Small Plant Pot for cloning (optimized drain holes) Update : New files added Eject Tool Pot Cover Stand for 12 Covers Print without support
Printronix T8000 series - stop on rolls of A4 paper
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
masonic symbol ornament for tree/free. If you make it please post it here. It also really helps if you like it, or at least comment.
New V3 with grooves for grip, angle markings, and modified dovetail channels! Slightly tighter clearances as well for less play. New V2 dovetail design added! Slightly flexible filament like PETG recommended to join the pieces without…
Easy to print. Dont use vase mode.
Fusion 360. Worked for years. PLA was fine but Petg for strength
Don't have loonies for carts? Need groceries? Well, put this on your keychain and you'll be set! Note: Canadian loonie
I needed a box for my smarthome system Homeassistant with ESPHome. A GeekPi breadboard 1/2 fits perfectly into the box, for which I have integrated spacers. An ESP8266 with a Pyrexx PX-AR smoke alarm relay was then placed on the…
This is a custom screen enclosure for the ELECROW Raspberry Pi Touchscreen 5" monitor (amazon non-affiliate link below). I have this monitor mounted in a Lian Li case - which did require cutting a hole in the mesh part of the case.…
Created this as a cover/case for the enviro sensor-Pi fits Pimoroni PIM486 Sensor board and fits snug on the front to protect/cover it. I used 90 degree GPIO risers and modified the case as you can see and allowed me to get it away from…
Sandworm 3D printer - Electronics: Signpost: Main Scheme of Boards Drive Mount XY Axis Z Axis Chassis Top Chassis Middle Chassis Bottom Electronics Extruder Filament and Spool Levelup Addons PrusaSlicer Tools Bill of materials (BOM)…
A very small remix made to fit the Phillips Sonicare DiamondClean HX939V. The fit is quite good though there's a little bit of play with respect to height. If you wanted a tighter fit you can likely get away with an inner height of 190 to…
Elegant stand for SmartAir / Qingping CO2 & Temp & RH Monitor. It provides better readability when the monitor is on the table. Works also with other sensors/monitors.
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
durante il riscaldamento del filamento, microparticelle possono essere rilasciate nell'aria, quindi il filtro aiuta a mantenere un livello più pulito dell'ambiente; si consiglia pertanto di aprire le finestre durante la stampa per far…
- NEW VERSION AVAILABLE- I created a second version for bigger magnets (10x2 mm) and with a thicker shell to make it more robust. Description A simple encasing for custom stackable Tonie tags with snap-in mechanism. Intended to be used…
An electronic assembly mat for soldering, breadboard assembly, and general assembly and organization of parts. Keep tools and small parts in their places while working with delicate hardware.
This is a cover design for the electronics box of the Prusa Mini or Mini+ loosely based on a design by @thefreewheeler (see here: Prusa MINI Z-Top | Electronics Box Lid ) , which attaches like the original Cover Plate. It gives the…
Algunos modelos las paredes vienen un poco mas gruesas y algunas son finas. me di cuenta que algunos modelos (módulos) son mas grande que otros los marque con (ORIFICIO NORMAL) (ORIFICIO GRANDE) hay muchos modelos de tapas de balde de 20L…
![Kryptonite lock mount V1 [Check V3 instead!]](https://media.printables.com/media/prints/515226/images/4172955_ecd098b5-d5e4-4f7f-aac6-0ecb25f6ec2b/img-0673.jpg)
