Counting matching models…
You can use the PET Strip Spooler to easily store strips from PET bottles in compact form and nicely winded. Up to 7 spools will fit into the spool holder. The strip can be leaded from the holder to the machine for conversion to…
I looked around for respoolers but couldn't find anything that seemed as convenient as I wanted it to be. This basically adapts a universal spool holder by closing the inside of the shaft and adding a hole that perfectly houses a long hex…
I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I…
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
we can all agree, for many of us right now… it's hot as Balls.. and well, my balls are hot. WFH or just in for a gaming session, with your 5090 pumping out the heat of a 1000's suns. I needed something to keep the crown jewels from…
Intercooler for Crocs. Add 6mm fuel pipes to connectors. Print 2 turbos, and superglue them together. : https://www.printables.com/model/317275-crocs-turbo
This is a spooler I designed for my flexible tape measure to be able to put it in a bag and forget about it. I first tried to find a model online but they were all either flimsy or had an open design. The spool is protected, winds up…
The perfect lightweight cooling setup for your new Ender 3 V3 SE.
Filament spooler for splicing filament and getting them all onto a single roll. Save some money and reduce plastic waste. Good for everyone.
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Here is a working 1/10th scale model of the classic Igloo Little Playmate Cooler. Link to the real thing I used for inspiration for this project: https://www.igloocoolers.com/products/ecocool-little-playmate-cooler Model Info The cooler…
V8 engine cooling cans. To assemble the engine you need to use M4 36cm 4 pcs. M4 12mm 2pcs. M4 nuts 10 pcs. It is worth checking all dimensions yourself after printing!! It's best to finally glue everything together
1/10th scale model of a Coleman cooler for use as a prop or accessory. Because reasons! This is a remix of OMW2FYB's work whom remixed from Schlauncha and I believe that is a remix of someone else work. I simply prepared this for a single…
As part of a quarantine project, I decided to pick up a used Nintendo Wii online to mod, and thought it would be fun to try 3D printing the accessories for it. Unfortunately, there aren't a ton of aesthetic options for most of the…
I created this design after looking around on Amazon for something similar and after scouring the internet for 3D printable solutions. I designed this in Fusion 360 and printed it on my heavily modified TrueUpLZ 3D printer. Print Settings…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Print the screw sideways and use support for the bit that goes in the drill, the rest can be printed without supports. I used “paint on supports” in Bambu studio. Also for the ring, use inner > outer walls ordering otherwise you might…
The cooler prints in two parts that is glued together. The three "sticks" that is printed with part 1 is used to strengthen the join. Glue them on the inside over the the join. There is a holder for the HW-585 12V fan controller You will…
→ neue Version: Filament Spooler Remix V2 Man kann die Sockel-Unterteile jetzt auch mit einer 0,8er Düse drucken, weil sich die Details nun am oberen Einzelteil befinden. Die oberen Einzelteile lassen sich nun einfacher drucken, weil sie…
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Special cooler to hold a six pack of average diameter cans in the piston holes. will just barely fit a 310mm bed.
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/375151 === The original by @noahrr was one of my favorites, but I found the winding holes too small for my fingers, so I remixed…
I lost the original rails so I copied the one I still had. I made this for the Cooler Master Silencio S600 but it should fit other Cooler Master cases as well. Let me know if it works for your case. The drive is mounted with 4 standard…
My 2nd design for my Raspberry Pi 5's (with the official Active Cooler), designed on my Pi 5 using Freecad / LibreCAD. This design keeps the micro-SD card safe inside the case boundaries and provides enough ventilation to keep the temps…
This is a remix of CG-Tech's excellent extruder stepper motor cooling fan add-on on Thingiverse. EDIT: I've uploaded a second version with deflected air ducts, based on CG-Tech's alternative one. It was a quick bodge and the stl file is…
This blank capswap model will allow you to create your very own capswaps to put onto your Titan All-In-One CPU liquid coolers. The second STL / STEP file contains the base of the cooler as well (This can also be used to mount your capswap…
This is a print-in-place hinge for Coleman coolers. The “PIN” version is designed to have the same opening stops that the original hinge and the “CONE” version stops at 90 degrees to reduce the stress on the screws holding the hinges on.…
Available in 355ml/12oz & 500ml/16.9oz. Requires 4x 4mm Screws (or you could just glue it…) . Screw holes are 25mm deep, accommodating many screw lengths. Very minimal supports required on Handle (pivot diameter) and Base (screw holes).…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
Double speed at :25 Update 1 nov 2022 : added a Python script for creating gcode for different spools. See the end of the description. I got my hands for a few weeks or so on a new printer with an automatic filament switcher (AMS). Great…
ICED AIR COOLER uses a 120mm pc fan and a frozen water bottle to create a chilled comfortable BREEZE for hours at a time. Its a really nice cool breeze perfect for those hot days where working inside at the computer is just not…
I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…
Hook part extended by 5mm on both mounts. Category: Computer
Was bored, made something for the next camping trip to the race track. Printable in PLA, PETG, ASA, ABS, everything is enforced by threaded M4 Rods. For Assembly you will need: 3x M4 threaded rods - cut to 5x ~ 36,0 cm (2 for the bottom,…
Need a way to chill your beverage? A single can cooler with a retro twist! This 3D printed travel cooler will make the best model you've ever made! How to Print The Body, Insulation, and Handle detail can be printed without support. The…
More options and upgrades available soon, free version includes very basic features! Free Version includes: Clean Cooler Grooved with Spout Model Features: Layered STEP files so under the objects tab you can easily color customize without…
Update 22.12.2024: ---- Update the models with the the bump to avoid the self rotation and add the STEP files for the original fan. ---- The airflow is much better than before, so try it out and please give feedback. I have use it for…
Parts required: 4x m2.5x12mm screws 4x m2.5 nuts While slicing, I used supports for the SD card slot and the screw holes but it's possible they may not all need supports. After printing, poke holes through the thin top layer that is…
Update: v2 Offset mod for Touch Sensor added. (Last photo) Offset Values added. Setup: You can find pdf document in the attachments for this. Printing: You have to use PETG or a heat resisdant filament to work properly. You can choose any…
I used a drill and a pencil to remove line from one of my reels, and it works OK . I figured I could do better. 1.0 wasn't much better than a pencil, but the file is there if you want it. For 2.0 I wanted to be able to attack it with…
I made this for my friends cooler which had busted hinges (very common) before I borrowed it. It works. The version I installed was printed in the orientation designed, with 5 external, 25% infill. Requires support because of the holes, I…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 module. This design uses a Sunon 5015 blower fan ran at a low voltage (5v) from a USB-C trigger module. More info coming soon!
Ender 3 V2 Stealthburner V2 I've modified the ABS mount to be one piece instead of two. And Its assembly should be pretty straightforward. The hole gantry does not need to be dismounted. Or the Heatsink. Just put it on top and secure it…
This is an improved version of a hotend cooler design I made a while ago. Its airflow is substantially better than the previous version. As well, you can now peek at the nozzle from the front of the machine so that you can see how the…
I was fanatical about this design. I wanted to make a lightweight cooling duct that improved the cooling and was easily tuneable. I would suggest printing this in ASA for heat resistance. I used the organic tree supports from the bed only…
I love my Voron 2.4 300, but I've been bothered by how PLA print speed is grossly cooling bottlenecked. I haven't seen a CPAP based mod for the Mantis toolhead that I could just slap right on to replace the stock ducts so I made one…
Fishing Line Spooler Reel Winder portable angelschnur aufspulgeraet
Fits any 80x80x25mm PC fan Visit website for more info
Printed at .12 layer height with 15% infill. Material doesn't matter. Painted the raised areas with white paint marker. Handle is made from a metal coat hanger wire. Print with normal supports
Introduction This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠ A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator. This case was built…
Laptop cooler that reduces laptop fan noise and decreases temperatures. To the print itself: Material: Any PLA (I used Extrudr PLA NX2) Temperature: 205 °C (Prusa Slicer preset for said filament) Layer height: 0.3 mm The print worked for…
Summary of the T240R- Top 240 mm Radiator mount for the Coolermaster NR200 ITX case. This is a mounting assembly/system mod for the Coolermaster NR200 to mount a full size 240mm radiator with 2 120mm fans to the top of the NR200. This mod…
Spooler axis remix for the original design from Miklos Kiszely
The Cooler Master Pi Case 40 (now V2) provides a long-lasting, premium enclosure for Raspberry Pi pro-users, featuring a sleek aluminum shell, and a high-grade TPU bumper for further protection. Once assembled, the system provides silent,…
Designed to be Printed on bambu Lab bed size 250mm x 250mm Split 3 piece engine block Cooler middle - 1 pcs Cooler block - 2 pcs Cylinder head 6 pcs Cooler handle - 2 pcs Ice cover - Dodge , ford or Blank - 3 pcs Cooler - No supports…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED April 20 2023] Other variants are published…
Update: Now with heatsert option using standard Voron heatserts. This design uses 3 x 40mm fans to keep the stepper drivers on Octopus boards running nice and cool. Confirmed fit on both Octopus 1.1 and Octopus Pro. Tested for clearance…
Remixed so it fits the Cooler Master Riser cable PCIe 4.0 x16
The model is an adapter for stock AMD am4 cooled to fit onto the LGA2011 style socket. I used mine on the HUANANZHI X99-8MF motherboard. It simply bolts to an Intel socket with four M4 bolts and AMD cooler screws directly to the adapter.…
Bored of cranking on the "Yarn Spooler Frame" #3954918 I decided to motorize it. Often I have filament rolls coming to an end, so sometimes I respool those on smaller spools for saving some space. With tara weight on the different spools…
A crank with longer shaft for manual re-spooling when the hexagon adaptor for an electric drill is in place. With this crank you can turn the spool manually even when the electric drill adaptor is installed. The normal crank will collide…
A working cooler for a single can of your preferred beverage, take a small break and have yourself a custom cooler drink---you deserve it! Or, in my case, it makes the perfect Father's Day gift. The main body of the cooler comes in two…
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
Just some minor improvements. See summary
Quick and simple spooler for a 200cm / 20mm tape measure.
Hello, I'm industriel designer, I usually draw on Rhino3. I made an extruder motor cooler which has the particularity of being positioned in the axis of the extruder. This is for new MK3s+ but also corresponds to the Mk3s model. The…
Can someone tell me what the riges on knives are for? I cant figure it out. UPDATE: Im working on a blade rn that my brother thinks is even BETTER than COOLER.BLADE (2)! photo of my work so far…
I made this parts cooler to help address a printing issue, it helps but didn't rid me of the issue.
Led not attached to the cooler. It only rest on it or you can glue it.
This is my ATMOS mod for comunity. Model should deliver RGB light effects too. There are two models for different hose position. You can add TEXT on tag at PrusaSlicer. Example from pictures is printed with 0.2mm layer height. !!!PLEASE…
Cooler used: https://a.co/d/gyw5dgC In my testing I went from 92c max to 72c max. Use the intel brackets (longer ones) to mount to the 3d Printed adapter. M4 nut and bolts for mounting.
This is a replacement drain plug cap for a Igloo BXM cooler. It may also fit other Igloo cooler and even other brands, but that has not been tested. Threads are tighter than original, but operate smoothly. The addition of a 26mm OD O-ring…
A simple vent clip-on that directs air perfectly onto the front of your phone, keeping it cool whilst charging (like in the BYD Shark). Around 19 grams of filament. I'd recommend ASA or a higher temp filament as car interior temperatures…
I've just designed my own small Stepper Cover to cool down the Stepper to an save Temperature. It's to avoid smelted Filament because of a hot Gear. The Cover snap's onto the Stepper Motor. It produces a small but enought Airflow to do…
This is a simple fan adapter / mounting bracket for mounting a 120mm fan on the original cooler of a Gigabyte MJ11-EC1 mainboard with AMD EPYC Embedded 3151 CPU. With this mod the cooler is whisper quiet and other components (RAM, NVME…
Things you need: 80x80x25mm fan 12v or 24v Power adapter 12 or 24v Switch DC power supply socket female Some heatshrink 7mm insulation plate or I used parquet base plate You can see how to make it in this video:
This is a slim and significant lighter stepper cooler for a 40mm Noctua fan. It is lighter because it works without screws. In my tests the stepper is not geting warmer than 45°C. The shaft with the drivegear stay at nearly the same…
EDIT: V2 uploaded. improved airflow. I need to improve the VRM cooling in order to put a 20 core Xeon (E5-2673-V4), I'm already using a 16 core Xeon (E5-2683-V4) in this board without any cooling and the vrm cooler was very hot. My board…
Case für raspberry Pi
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
BIGTREETECH Octopus PRO Cooler for Rat Rig 3x 4010 Cooler Fan support
This is a stock drop in alternative (I'm hesitate to say upgrade) for the stock fan ducts on the AnkerMake M5. The aim of this was to mor evenly distribute airflow around the nozzle and I think we accomplished that here. I don't think it…
Hard Drive Sled for Coolermaster CM 690 II for both 3.5 and 2.5 inch drives. Print Settings Printer: Kossel XL Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Polymaker Polyflex TPU Black Notes: The Hinge Hole is…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Update V4.2 Fits on my MK3s+ upgrade without any issues. hint!!! After replacing the heatbreak with an original e3D, we were able to print the material that never ran before. most PLA filaments works very well (many times printed over 20h…
09/17/22 update: If the wingnut continues to loosen when the spool spins, you can rotate the base 180% and flip the fishing line spool 180%. Or you can add an extra jam nut before screwing on the wing nut. After overpaying for 200yd…
Small cooler for a 10 or 18/24 Scale RC Car
This is my contribution Remix from Major Hardware Deskfan, but with Laminar Flow. Lets start the Remote Aircooler competition! This is the 120mm Noctua Desk Fan Version This version is calculated to target a 2,5m target. For this the…
This simple filament spool holder is based on the original ones shipped with the MMU2S upgrade, however in a smaller form to fit five of them in a common plastic (almost) dry container. Although there are many amazing holders and dry…
Simple guying line spooler. I made it for my amateur radio station. You may also use it for kite or as a general paracord spooler. Print instructions Thin version is 5mm, thick is 7mm. I printed this from PET-G.
Update: Revision 8 - (R8/R8-Solid model in printable files): Hex edge thickness increased to improve stability and printability Solid version included (easier to print than hex, slightly heavier) Slightly adjusted vent angles. Improved…
@med145 's wonderful bracket adapter ( https://www.thingiverse.com/thing:2238848 - The attribution field was broken at the time of upload), but, includes the standoffs so that the STOCK backplane + screws can be used, without any sort of…
I wanted to make use of all the space available on the bottom of my NR200, so I made this adapter to fit two 140mm fans instead of having two 120mm fans and some unused space. I made this 9.5mm high in order to fit the adapter and fans…
This is an extruder cooler based on my previous remix, adding a bit of extra cooling made possible by the new MK3S+ extruder design. As with my previous remix of KalleKnall's extruder cooler, this is meant to stop filament jams due to…
Source file: https://cad.onshape.com/documents/6d2b5ab70346f30288cee4bc/w/581da15e481f8d17d003e36b/e/63c9a12203e9ab6971e0f0a6?renderMode=0&uiState=62ba698e4404174302000963 Small change to the v4. The slice engineering mk8 heat break was a…
![#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]](https://media.printables.com/media/prints/786225/images/6325215_44438b46-20a6-4396-bdae-72593db3e3a6_7d72e422-ffa4-4ae1-85e0-a7646e047e42/rl-20240317-023.jpg)
