Counting matching models…
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
Recommended to print with PETG.
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…
Adapter for Geberit Sigma Flush Plate on UP100 Cistern The Geberit UP100 is a popular concealed cistern model. However, its compatible flush plates often lack the aesthetic appeal of the Sigma series. Unfortunately, Sigma flush plates are…
This is a mount for Ecotech Vortech MP40 and MP10 power supplies to be mounted on the wall to ensure if a tank leaks, the electronics will be protected. Printed in PETG.
Fan ducting that can fit an Nvidia Tesla Pascal-generation P100 and possibly P40. Maybe even more! I'm not sure. I don't own any of the others. I am not good with computer. Or 3d modeling. If this isn't perfect, I'm sorry, please teach me…
Print settings: Printed with support (I printed it with "normal" support, tree support may also work) Short version may also need supports on the inside 3 walls 20% infill Comes in 3 lengths Includes printable gaskets for better…
This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…
3D-Printed adapter for 2x40mm fans on a Nvidia P100 GPU, this part is friction fit only and will hold on very good without screws or glue. Probably also works on older Nvidia tesla cards like the k80, but not tested. I used Fujitsu 40mm…
This is an adapter I made to enable me to use a Ryobi P102 Battery as a power source for my fish finder. The tow holes in the top of the adapter allow the ends standard female spade connectors to pass through and then I added wiring and a…
This 40mm fan adapter for Nvidia P40, P100 or M40, is a visual alternative to the plain, box shaped fan adapters on the market. Its design follows the stylish contours of the P40 graphics card, with a gradual transition to the fan's wider…
Push fit MP10 Vortech guard/cover to protect your Nems. Designed from scratch due to losing an anemone from a guard that didn't also cover the face of the powerhead. For best results print face down using PETG, no supports etc required.
# Dual NVIDIA Tesla P100 Fan Shroud — One 120mm Fan, Two Cards (KZM) **One standard 120 mm fan. Two passively-cooled Tesla P100s. Field-proven at 63–68 °C under full load.** The Tesla P100 gives you 16 GB of cheap HBM2 muscle for home AI…
Tested and working, .327 caliber speed loader for the Ruger SP101. Material: PLA Requires super glue inside hex cap for the final assembly. Updated design, as of 6-22-25 No supports needed, easy assembly. STEP file included for mods. A…
This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-B The red flat piece in the middle is a sample to simulate the ceiling bracket (SUPPORTED…
When printed, I filled the internal with supports for the front cover. Supporting the front cover seems easier than supporting the 3 cubes that hold the guard onto the wetside due to the triangular shape of the cage.
I have customized my P10F to be a bit more of a comp gun, and I wanted a magwell - however, with the Taylor Freelance Brass backstraps ( https://taylorfreelancestore.com/cz-p10-f-backstrap-alum-black/ ) it was harder to find a milled…
After struggling to find any kind of upgrades that can be done on this Monoprice MP10 printer (same as the MALYAN MA10), I designed and created my own V6 Hot-end adaptor. If you own one of these printers, this adaptor lets you KEEP the…
You can use this mount on the Ikea Bekant sit/stand electric desk . Print the 5 parts (Generic print outside part twice). There is a version for a generic square PC casing and one that is adapted to the MSI Creator P100X 11. Also you will…
can be printed without supports in PLA and be connected on the pins with glue
I saw something like that by Matrhack on Thingiverse, but it didn't work for me, so I designed my own quick print. Works perfekt on my Steyr air pistol, don't know if it fits for other pistols. The cartridge diameter is 30,5mm and the…
Could not find an official enclosure so I made my own.
I love my P1000f pedals from Simagic for many reasons, but the original pedal plates are not one of them. I found them too slippery and small, and the curvature is not precisely “sporty”—at least for open-wheel racing. My take on the…
I created this mounting bracket after the one that came on my P100 wouldn't fit in my Dell Precision desktop. Using this bracket should allow it to be mounted in any standard PC case without any issues. While having it printed in plastic…
Speedloader in flexible TPU for 357Mag Ruger GP100 Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,15 Infill: 20% Filament: Devil TPU Black Notes: Print slow! Real slow Category: Sport & Outdoors
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
Hello, I made bottom plate adapter for CZ magazine ( P10 / P09 ), with picatinny to accept Mantis x system. The main issue I had is that my holster would not accept gun anymore so I had to do it on a magazine. Tried it and it fits…
Gun loader: CZ P10, CZ P07, CZ P09 — 9x19 mm Luger Remix (no supports)
Recently, I installed some graphics AI on my computer, and I like the side blowing cooling method, so I made a fan adapter that looks good to cool my graphics card This model is applicable to the fan model 752512Turbofan
Sept 2023 Update: Improved Design Now Available Here: https://www.printables.com/model/586801-improved-replacement-drip-tray-for-the-grp1060b-4- Somehow lost the drip tray/catch pan for my 4-serving George Foreman Grill (GRP1060B).…
For using LJ12A3-4-Z/BX proximity sensor on the Monoprice MP10 (CR10-style) 3D Printer. The bed levelling sensor can be hard to find so if it fails this bracket can be printed that utilises the existing mount and m2.5 screws to adapt to…
I created this stand to support a revolver (specifically a Ruger GP100) vertically for storage in my safe. It may work for other models. For this style of print I've achieved adequate strength in PLA with 3 perimeters and no infill. Use…
Fork Spring Spacer Washer 35.5/26mm th10mm Honda Transalp 600/650 Rondella Distanziale Molla Forcelle 35.5_26 sp10mm Transalp Filaments recommended: Nylon PA12 ASA PPS-CF PPA-CF PA6-CF PAHT-CF PA6-GF or filaments with a excellent…
For the CTP10 board which can request various voltages from USB chargers supporting: PD - Power delivery QC - Quick charge FCP - Fast charge protocol AFC - Adaptive fast charge Sorry about how the lid attaches (glue). I doubt I will ever…
The California Air Tools 1P1060S compressor is well reviewed as being quiet compared to the competition however due to vibration, if you're using this inside, it's still very loud. I found if I held the compressor in the air while it was…
It is recommended to print this from the side, which will produce the best results and does not require any support structure by the design of the structure. This holder can be easily attached to the aluminum wall of a shower cabin as…
For 1x 40x30mm turbine (75x75) For 2x 40x30 turbine For 2x 40x40 server coolers.
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
i have redesigned the spacers because the original ones don't fit perfectly. if you're unlucky, the spacer in the cover breaks the first time you operate it. On the cylinder side, the spacer does not fit into the aluminum ring. i have…
The PTFE Bowden tube on my Monoprice MP10 (Creality CR-10 clone) wasn't well supported where it left the extruder. It drooped excessively which seemed to cause unwanted friction on the filament, so I designed this bracket to resolve the…
I just brought a Resmed Airmini for travel and I couldn't get used to the N20 nose mask.
Printing Instructions (PLA): Main Housing: 30% infill, enable supports (minimal/touching buildplate only). Other Parts: 15% infill, no supports . Layer Height: 0.2mm (recommended). Wall Count: 3 (recommended). Fan Specifications: Size:…
Original eyecup and remix source kept snagging on stuff. These models only slightly protude from the viewfinder. Print it in TPU.
This brake modification increases the usable space in the brake piston by freeing up unused space in the original design. This allows up to 3 springs to be used at once, significantly increasing pedal travel. Also, longer spring and…
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
I used the PCB from this hard drive enclosure: https://www.amazon.es/gp/product/B081N1NM18/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Print Settings Printer: uwu Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 10 Filament: Whatever…
Remix of an original on Thingiverse. Preferred a version for a bottomless PF and caught coffee grounds. Tested on a P100 revision that came with the Versa cup. Print Settings: Tested with 4 walls, 4 top/bottom layers for strength but…
Storage for CZ P10 mags. 4,5&6 magazine variants. Pockets in rear to suit 20mm X 7mm neodymium magnet off amazon.
I made this Lens cap for my friend. Lens diameter 77mm. Fit to Nikon CoolPix P1000. I used multicolor print. I changed the filament during printing. This is first version. Maybe I'll improve it later when it loses this cap again. Very…
I somehow how misplaced the drip/grease tray from my 4 serving Foreman grill. Without the drip tray, the Grill is unusable. By design, when frying hamburger or other meat on the grill, hot grease flows safely off the bottom edge of the…
My Monoprice MP10 (Creality CR-10 clone) fitted with an alloy MK8 Bowden Extruder upgrade would turn any soft filament into spaghetti due to the filament path floating in mid air after passing the extruder feeding gear. I designed this…
A few months ago I damaged one of my PCBite SP200 probes. So i had to repair them. When i saw today those protective sleeve i thought lets print one of those. Unfortunately it didn't fit the SP200. So I designed a new one i started from…
This is an optic mounting plate made for the CZ P10s, but should work for the P10c and P10f as well. It fits sights that conform to a C-More or Vortex Razor profile. It was directly tested with the Primary Arms GLX RS-15 sight, but there…
Seitz Window Blind Flyscreen Retaining Clip SP1044 Caravan. Fix your caravan or motorhome blinds quickly and affordably! This 3D printed clip replaces the often-broken Seitz/Dometic part (SP104409/SP1044) and restores smooth blind…
A simple bungeemount for the Subgear XP10 dive computer. Print, clip in and insert 4 mm bungee cords at the desired length. Print instructions Category: Sport & Outdoors Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20%
I've made an adapter for my enclosure to use P100 VOC cartridges and filters as a fume extractor. EDIT March 23' added a second layer and enclosure for some sound dampening and more filtration
Dual adapter to connect one 92mm axial case fan to two GPUs Designed for an HP Z440, which leaves one PCIe slot width between the GPUs. Take the lower air intake case fan out of the bracket and attach it to the dual fan shroud, then turn…
You can add haptic feedback to the Simagic P1000 Pedals using the official peripheral or you can DIY by using some relatively inexpensive components. You'll need: Nobsound USB Amp (about 45eur at the end 2023) two “resonance speakers”…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
Custom Huawei P10 lite Case - Precision-Made for a Perfect Fit (STL File) Protect your Huawei P10 with this high-quality, custom-designed case made specifically for your device. This case is designed to provide a snug fit, offering…
P10 Mount for Colorlight board. First STL was intended for nuts on the back side. "Self Tread" STL is for just using #6 sheet metal screws into the plastic. "End Mount" used the same self threading holes but moved the mounting tab to the…
A 2x2 gridfinity holder that holds 4 Pcbite SP10 probes. Press-fit Magnets.
if you like make sure to click like, it helps me make more projects like this. make sure to enable support but use support painting with tree supports.
I have a NAS server with the Antec P101 Silent Case. When the side panel clip broke I made this one to raplace it and figured, why not share with others that may be searching for this too.
Blind Shaker holder for the Lagom P100. This uses a magnet to perfectly center the Blind Shaker on the shelf. The magnet is a 8mm x 4mm neodymium magnet you can find on Amazon or Aliexpress.
The locking mechanism on my pruners wasn't keeping them closed anymore leaving the sharp blade dangerously exposed. I modeled and printed a replacement part to rectify that situation. It prints fine in PLA but I would recommend something…
A 3x1x6 Units Gridfinity Base for Noga SP1010 Deburring Set Holes are already with offset. If your printer tolerances are out of way and the pins don't fit, a 3.5mm (ideally 3.4mm) drill bit should do the job.
I couldn't find a fan shroud for specifically the CMP100HX-210. The ones for the v100 didn't work for this, despite what's said online. I made this for 2 40mm fans and M3 screws screwed into the plastic. I couldn't be bothered to add…
So far I only found external switch for original Traxxas ESC. Current model accommodates the 1080 ESC and the power button. Also the button can be actioned by a lever protruding between chassis and sliders. Main difference is that lever…
Wall (or door) mounted Caddy for 2 bottles of 2.25oz 2P10 glue and the activator can. Recessed areas in the back to add magnets. Sketchup model included to customize on your own. Note that I made it fit snug as a matter of preference…
You will need a 25.4 mm (1") metal pipe with a length of 255 mm. I used a seatpost from a children's bike. 4 bolts with nuts and washers M4x25 2 self-tapping screws 3x16 (optional) for fixing the pipe. I provided holes for them, but I…
(Universal) 15mm Rail Mount fit (12&20mm) red dot sight scope Hot Shoe adapter UFO Hunters or Mother Nature Spy will Love This... ;-) Print Settings Rafts: No Supports: Doesn't Matter Category: Hobby
Originally I posted this to Thingiverse in 2016 This is a case designed to hold a 3 month supply of ResMed AirFit p10 Nasal Pillows. I may create other sizes as well. I printed in a flexible filament such as TPU but ABS/PLA should work as…
Clarke CDP102B Bench Drill Press Replacement Collar / Depth Stop which is a drop in replacement of the original, which I broke. I used the original collar / depth stop for measurements to model the replacement, but I also made it a little…
You can adjust the path of the pedal precisely by increasing the size in the slicer / height. The Top is rounded so it dont caught by the Spring. The Spring has an inner diameter of 14mm. Print should be around 20 min. Printer Settings:…
This is a compact drying stand for a ResMed AirFit P10 for AirMini mask tube. Use two of them attached to each other (see model pictures) to prop up the end of the mask tube and let it drip dry. A design feature is that the two pieces…
This is a two part camera mount for a BirdDog P100 PTZ camera. It's designed to allow a P100 to be hung upside down under a balcony/ceiling. The BirdDog P100 is attached to the underside of the Bottom Camera Plate. The Upper Rail is…
Fits the Flywoo decased GoPro 10 (not the latest bigger one but the previous generation). Some rework maybe needed to fit the new one, feel free to remix. There is an insert for a 270° pan servo from AtomRC (or any similar servo), holes…
Vacuum skimmer plate Hayward SP1094D Plateau d'aspiration piscine Hayward SP1094D Print in ASA, 45 degrees Imprimé en ASA, à 45 degrées Printed on a Qidi Q2 65c heated chamber with : 4 walls, 15% infill, 0.24mm layer height
this case is designed for sinilink amplifier AP100H version Category: Electronics
Protective caps for front wheel bearings Segway-Ninebot KickScooter P100S Print with soft rubber-like materials such as Soft TPU. Be sure to use lubricant during installation. Sprays don't work. Added updated version of rigt cup Print…
I (re)designed this support bracket to provide better stability for an MSI RTX 5070 Ti Ventus 3X graphics card inside an
My first crack at a Gridfinity holder! This is for the CRAFT911 P100 Pin Vise (hand drill) kit from Amazon ( https://www.amazon.com/dp/B098CF3VMM?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1 ). Let me know how it works for you or if…
The model is designed to mount 3 Tesla P100s to a 120 mm fan with high static pressure. I use an Arctic P12 Pro, which seems to be totally fine for normal workloads, and only struggled after a few minutes in a GpuBurn test where the two…
Hello everyone. I modified a model that was originally excellent but didn't fit the longer versions of the P10 pistol, such as the P10F and P10SC. The remix involves extending the lower part of the holster to accommodate the P10 pistol…
Needed connectors to secure p10 panels together
Extends the flashlights body to reduce risk of miss pressing of on/off button. Button is visible and functional over wall for ease of use. It doesn't protect button fully but decrase chance that button is pressed without intension.…
Together with Alexander Schwartz , we designed an adapter to mount the Logitech Brio Stream webcam to the SmallRig Teleprompter TP10 (SKU 3374) Here is the tinkercad source in case you want to modify it.
Keeps together without any hardware for me. No supports needed. Mouse ears on the outer corners protected against warping for me.
3D printable ACA P10 more is coming soon hope you like it.
why do these caps always get lost. Here's a 3D model for you, brother. now you don't have to worry about losing the sprayer tank cap. specially designed for XAG drons
Dust connection for a 100mm hose in stead of the tiny 35mm thing that comes withj the saw Category: Parts
This is a replacement for any of the four clips that hold the headband straps to the GVS Elipse OV/P100 respirator . I have model number SPR467 (the M/L) size, but these likely also fit SPR466 (the S/M size) as well as many other…
STUP100-LD Boost Converter case, with button on the outside. Print parameters Printer: Creality Ender 3 Pro with Hemera DD extruder Material: ABS or as you wish Supports: No supports necessary, place it “upside-down”
Holder give to use AAA NiMH battery instead of proprietary stock battery. HHR-P105
Bit rushed in the morning? Daily cleaning of the CPAP can be a chore. Grab the hose and rinse it while you’re in the shower anyway. Then, hang it from the shower cabinet, to dry on these hangers for later in the day. This bucket (whit…
My Proscenic P10 clip was broken, so I re design the button and print it. Better if PETG
