P
PrintablesToWcH
Raspberry Pi5 Case (Exposed Cooler)
Raspberry Pi5 case with the cpu cooler fully exposed
- Downloads
- 175
- Likes
- 15
- Rating
- 5
Search results: posed
112 models
P
PrintablesBlueberry
Extended mini utility knive (10mm more blade exposed)
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
- Downloads
- 134
- Likes
- 17
- Rating
- 5
P
Printablesbitsplusatoms
Hummingbird with exposed infill
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
- Downloads
- 126
- Likes
- 33
- Rating
- 5
P
Printables3DHippo
Posed Zombie Hands
I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…
- Downloads
- 76
- Likes
- 20
- Rating
- 4
P
PrintablesGoldfish1974
Godzilla Minus One - Posed (Very High Resolution)
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
- Downloads
- 2,354
- Likes
- 143
- Rating
- 4.83
P
PrintablesPeter C
Golf - Golf Ball Stencil - Holder - Ball Buddy - exposed magnets & embedded/covered magnets version
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
- Downloads
- 971
- Likes
- 70
- Rating
- 5
P
PrintablesRowaller
Juxtaposed Y-splitter for BambuLab P1P / X1C
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
- Downloads
- 807
- Likes
- 110
- Rating
- 4.94
P
PrintablesPittRBM
MHW: Odogaron (posed)
UPDATE: recommend this sliced version instead: https://www.thingiverse.com/thing:3936411 Another rip from Monster Hunter: World Fun Fact: Feed him with any kind of meat to make him glow (and berserk, see render) Contains few overlaps from…
- Downloads
- 752
- Likes
- 61
- Rating
- 5
P
PrintablesPittRBM
MHW: Deviljho (posed)
Another model from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
- Downloads
- 569
- Likes
- 42
- Rating
- 0
P
PrintablesChris Riley
Voron LED light diffuser repurposed
I took the Voron enclosure part and made it longer so I could use it on other projects.
- Downloads
- 569
- Likes
- 60
- Rating
- 5
P
PrintablesPittRBM
MHW: Nergigante (posed & sliced)
Sliced version of https://www.thingiverse.com/thing:4098730 file name explanation: First char: A = arm, B = body, H = head, L = leg, W = wing, T = tail second char: L= left, R = right S suffix = spikes Union-ing spikes resulted in failure…
- Downloads
- 462
- Likes
- 48
- Rating
- 0
P
PrintablesMW-Mechanical
Upgraded fan duct (exposed print head setup) for Anycubic Kobra Go
You'll be able to replace your original print head housing with this exposed print head setup using only the original screws. SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only…
- Downloads
- 448
- Likes
- 61
- Rating
- 5
P
Printablesauburn
flipper zero wifi board no SD card and no exposed Wi-Fi chip
wifi boad no sd card and no exposed Wi-Fi chip
- Downloads
- 436
- Likes
- 29
- Rating
- 5
P
PrintablesPeter C
Golf - Divot Repair Tool - plus ball marker holder (with exposed magnet holder)
For the conscientious golfer who likes to fix their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface. Usage Divot repair tool - Ergonomic design with…
- Downloads
- 412
- Likes
- 46
- Rating
- 5
P
PrintablesPittRBM
Odogaron Posed & Sliced
A sliced version of https://www.thingiverse.com/thing:3710457 for best seams location. See images for recommended orientation Internal tube cavity can be used to hold LEDs for glowing effect. Use transparent filament! May require some…
- Downloads
- 396
- Likes
- 71
- Rating
- 4.67
P
PrintablesPittRBM
MHW: Legiana (posed)
Another rip from Monster Hunter World, ice-screaming wyvern "Legiana" Category: Creatures
- Downloads
- 380
- Likes
- 37
- Rating
- 0
P
PrintablesARDev1161
PS5 DualSense mount with exposed usb port and strap eyelets
Remixed base block from this https://www.printables.com/model/479716-ps5-dualsense-controller-phone-mount
- Downloads
- 329
- Likes
- 28
- Rating
- 5
P
Printablesmatrex8
M1 Mac Mini 10 Inch Rack mount with exposed I/O
I designed this because I wanted to rack-mount my Mac mini with the I/O accessible from the front, and I couldn’t find anything that actually fit my needs. The design is intentionally simple, but it does the job well. The front panel is…
- Downloads
- 320
- Likes
- 28
- Rating
- 4.33
P
PrintablesElliott Price
Revenant posed (Doom)
Posed Revenant from Doom. One posed model and pieces of the overall character that I eventually glued together. I haven't tried printing the entire thing all at once, not sure if that will work. Attached photos of a painted version. Print…
- Downloads
- 316
- Likes
- 76
- Rating
- 0
P
PrintablesPevnostní architekt
MO-S 11 U posedu
Izolovaný pěchotní srub postavený ve II. stupni odolnosti. betonáž: 5. - 10. 8. 1936 kubatura betonu: 1530 m3 osádka: 34 Objekt se nachází v katastru obce Šilheřovice u Ostravy. model je v měřítku 1/72
- Downloads
- 306
- Likes
- 40
- Rating
- 5
P
Printablesgiuliancol
Drums (shells) FULL SIZE, composed
S I Z E S INCHES MM outer diam. x height outer diam. x height BASS DRUM 22 18 558.8 457.2 FLOOR TOM 16 16 406.4 406.4 SNARE DRUM 14 6 355.6 152.4 TOM 13 13 9 330 228.6 TOM 12 12 8 304.8 203.2 Dimensions refer to the most common sizes. In…
- Downloads
- 250
- Likes
- 64
- Rating
- 0
P
PrintablesEngineered Chaos
Cat Ball Chase - Repurposed Prusament Spool
Own a cat? (or does it own you?) own a 3D printer? got some empty filament spools? repurpose them with this clip-on ball chase ring that will hopefully keep your cat entertained for hours and be the source of many an adorable moment! The…
- Downloads
- 207
- Likes
- 51
- Rating
- 5
P
PrintablesMatt Harrison
Octopus with exposed brain
Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.
- Downloads
- 206
- Likes
- 38
- Rating
- 5
P
PrintablesTyler Reeves
Jan Rezac's Stove Canister Support for Repurposed Air Horns
Hey you crazy UL hikers! This is a Fusion360 Port of Jan Rezac's air horn support canister for people to download and adjust a customer sized diameter. If you're unfamiliar with this idea and what its used for, check out this BPL thread…
- Downloads
- 169
- Likes
- 11
- Rating
- 0
P
PrintablesHunex
Terraforming Mars Storage - Exposed Magnets
Exposed the magnets so they can be inserted after printing.
- Downloads
- 158
- Likes
- 11
- Rating
- 5
P
PrintablesDavid R
SasnDisk Extreme Portable SSD (SDSSDE61) Case - With Port Exposed
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
- Downloads
- 154
- Likes
- 19
- Rating
- 3
P
Printablesmobiobi
Turntable - Repurposed Spool
This model https://www.printables.com/model/136844-herringbone-geared-turntable-roller-bearing is an absolutely beautiful and functional self centering thrust bearing design. It looks good just sitting there, but I wanted to make a…
- Downloads
- 147
- Likes
- 101
- Rating
- 0
P
Printables0ldSkull
TeensyROM Exposed Case
This is an alternative case for the TeensyROM cartridge for the Commodore 64. It's designed to be easy to print (no supports), leaving some of the cartridge's larger components “exposed” through cutouts in the case. Significant…
- Downloads
- 135
- Likes
- 7
- Rating
- 5
P
PrintablesAnthony S
Mirrored mount and exposed ports for "Mountable ESP32 Screen (CYD) case with pen holder"
Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…
- Downloads
- 120
- Likes
- 12
- Rating
- 0
P
Printablesleavic
Orange Pi Zero 2W Case w GPIO&FPC exposed
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
- Downloads
- 118
- Likes
- 12
- Rating
- 0
P
PrintablesThe Digital Armory
Exposed head for Dummy 13 (1.0)
This an exposed head for the dummy 13, it has a skull, spine, tounge, and teeth
- Downloads
- 105
- Likes
- 39
- Rating
- 0
P
PrintablesArkku
Juxtaposed Y-splitter for Bambu Lab X1C (smaller inner diameter)
The juxtaposed Y-splitter by @RomainSCHWALL_687256 fixed my AMS retraction issues with PLA-CF, but in turn I had issues with non-AMS filament through the bypass path hitting the edge of the PTFE tube. This remix makes the inner diameter…
- Downloads
- 102
- Likes
- 18
- Rating
- 5
P
PrintablesArek
AirTag enclosure (AirTag not exposed) with your logo
Wanted small(est) AirTag enclosure that doesn't expose it. You can add your logo or text on the enclosure (best to put it on bottom, so it will keep stable orientation regardless how hard you close the top cap). Fusion source file is…
- Downloads
- 95
- Likes
- 11
- Rating
- 5
P
PrintablesJosé Pedro
Guy Sitting on Ground - Relaxed Posed Character
Capture a moment of quiet repose with this 3D printable STL model of a Guy Sitting on the Ground. This relaxed posed character is perfect for adding life and narrative to your dioramas, gaming scenes, or miniature storytelling setups.…
- Downloads
- 92
- Likes
- 7
- Rating
- 0
P
PrintablesMagig_I3Prusa
TTRPG Elegant Female Pirate Nosupport POSED FDMPrinting Miniatur
Very Easy to print Female Tabletop Miniature Thei mage showes Prusament Bronze Ender3V3 0,2 Noozle / 0,15Layer 1hr Printtime Supportfree POSE as shown in the image
- Downloads
- 85
- Likes
- 9
- Rating
- 0
P
PrintablesBostanDesign
It Was Supposed To Be A Witch Broom... But The Witch Turned It Into A Mop!
Originally, I wanted to design a witch broom for Halloween — but somehow the witch turned it into a mop ! 🧹😅 The articulated mechanism is inspired by this articulated snake model , but completely remodeled and adapted by me for this…
- Downloads
- 81
- Likes
- 29
- Rating
- 0
P
Printablesar300500
BiQu H2 Fan duct (With manual filament gear exposed)
Remix of lightninglord88 fan duct ( https://www.thingiverse.com/thing:4816138 ) with the part than covers the manual feed gear removed (crudely) in maya. STL export broken for me so its an OBJ but should import fine. Cura was fusing the…
- Downloads
- 77
- Likes
- 5
- Rating
- 0
P
PrintablesRiley CLZ Tech Studio
Gibraltar apex legend, posed sitting wounded
guy from apex, posed with mixamo and blender printed with default settings and organic supports file is a little broken, please share if you fix it
- Downloads
- 73
- Likes
- 7
- Rating
- 0
P
PrintablesMehTechArt
Flexi Demon Hand – Skeleton Hand with Exposed Bone
Please click ❤LIKE❤ if you appreciate my work 😊 Flexi Demon Hand – Articulated Skeleton Hand with Exposed Bone A creepy flexi demon hand with articulated fingers, skeletal details and a distinctive exposed bone extending from the wrist.…
- Downloads
- 71
- Likes
- 20
- Rating
- 0
P
PrintablesSunShine
MAGNETIC Chainmail Wallet with exposed Magnets
Please see the announcement Video where I "improve" 5 different 3D-printable designs: https://youtu.be/en_qw3RvsaI After having a lot of success with my Chainmail wallets, I decided to update the link design ever so slightly and make it…
- Downloads
- 70
- Likes
- 25
- Rating
- 5
P
PrintablesDontForgetToLike!
Dummy 13 Skull Head with exposed brain
Dummy 13 skull head with brain exposed
- Downloads
- 69
- Likes
- 18
- Rating
- 0
P
PrintablesIonic
Smallest possible ESP32-CAM with Snap-On lid (GPIO exposed)
Variant of the snap lid case for the "Smallest possible ESP32-CAM" to be able to use the GPIO headers.
- Downloads
- 68
- Likes
- 7
- Rating
- 0
P
PrintablesDankeshane01
Headphone Hanger - Repurposed Ikea Svallet Base
Like many others, I purchased an Ikea Svallet lamp to cheaply salvage an E12 Socket for Frank Deschner's Moon Lamp. Several other users, including CJPrints and veritas, have created alternate bases that can receive this Ikea lamp base. In…
- Downloads
- 64
- Likes
- 13
- Rating
- 4
P
PrintablesSlagmoth
S22+ Remix exposed edge
I made John S' case for my S22 but my wife liked it, but she had an S22+ after some trial and error I resized and repositioned the button sections to fit her Phone… I posted the base file but the photo is one I cut out her nickname on the…
- Downloads
- 50
- Likes
- 6
- Rating
- 0
P
PrintablesDontForgetToLike!
Dummy 13 Skull Head with Exposed Brain resized 200%
Dummy 13 Skull Head with Exposed Brain resized 200%
- Downloads
- 49
- Likes
- 13
- Rating
- 0
P
Printablessprite222
Octopus Pro Fancase - Exposed 5v rail
Adjusted the right side to mirror the left cutout in order to expose the 5v and GND rails on the Octopus. This allows you to run a DuPont connector where previously it was blocked by the original midpiece design.
- Downloads
- 48
- Likes
- 3
- Rating
- 5
P
PrintablesBootjevaarder
Opposed Pistons Engine
General An opposed-piston engine is a two-stroke internal combustion engine where two pistons move toward each other within a single cylinder, with combustion occurring between them, eliminating the need for a cylinder head and…
- Downloads
- 47
- Likes
- 7
- Rating
- 0
P
PrintablesFredslund
Exposed Infill Pencil Holder
This cool pencil holder can be printed in any material! in the premade G-Code there is color change included like it can be seen in the pictures, and don't worry, you don't need any MMU to do the color change, simply switch the filament…
- Downloads
- 47
- Likes
- 13
- Rating
- 0
P
PrintablesBarrnet
Case for BTT PI 1.2 with the DC24V input exposed
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
- Downloads
- 40
- Likes
- 5
- Rating
- 0
P
PrintablesDontForgetToLike!
Dummy 13 Skull Head with Exposed Brain resized 250%
Dummy 13 Skull Head with Exposed Brain resized 250%
- Downloads
- 38
- Likes
- 17
- Rating
- 0
P
PrintablesPaul Staal
Project INFIN_IT: A Framework 12 Based Modular Workstation with Repurposed Components
What if your obsolete hardware didn't have to become e-waste? What if you could give your discarded tech an infinite afterlife? Project INFIN_IT is a fully modular, all-in-one luggable workstation engineered around the Framework Laptop 12…
- Downloads
- 37
- Likes
- 59
- Rating
- 5
P
Printablesvermontsfinest
Mountable Ryobi ONE+ Battery Socket with Exposed Terminals
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide,…
- Downloads
- 37
- Likes
- 1
- Rating
- 0
P
PrintablesChris P
OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports
I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119 The USB cable in the picture is connected to the printer, I needed the GPIO ports for…
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesLatenivenatrix Mcmasterae
Jurassic World Evolution Troodon model (unposed)
NOT MINE (obviously) There wasn't enough troodontids on this sight. The original upload of this model on sketchfab was lower poly so I simply made it higher poly and printable Troodon by Frontier Developments
- Downloads
- 36
- Likes
- 2
- Rating
- 0
P
PrintablesPlastic imperial
Artillery cannon 3d printable (must assemble, picture just to show how it's supposed to look)
I got bored and made this in tinkercad
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
Printablesdrewmoseley
ESP8266 D1 Mini Case Pins Exposed
This is a simple case for a Wavgat branch D1-Mini. I could not find one that fit this specific board with the pins exposed so I created this.
- Downloads
- 34
- Likes
- 1
- Rating
- 5
P
PrintablesHighcooley
Case for Fish8840 TransistorTester with exposed SMD Pads
CraVeg's Case for the Fish8840 or other RipOff Component Testers but with exposed SMD testpads Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 Infill: 40% Category: Electronics
- Downloads
- 34
- Likes
- 2
- Rating
- 0
P
PrintablesNot Joe Prints
SanDisk Extreme Portable SSD (SDSSDE61) Compact Case - Port Exposed & Port Exposed with Screw Hole for Mounting
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
- Downloads
- 33
- Likes
- 3
- Rating
- 4.5
P
PrintablesHackthis02
Airgradient w/ exposed temp/humidity
After watching this YouTube video by Jeff Geerling . I printed and built the Air Gradient. In Jeff's video, he mentioned that temp sensor might give higher readings because of it's locations in the case. I noticed what I believe to be…
- Downloads
- 32
- Likes
- 4
- Rating
- 3
P
Printablesjuanc.cilleruelo
This is a practical exercise proposed on Telegram Group "Diseño 3D"
We have a Telegram Group called "Diseño 3D" in which every week, a user proposes a design to be developed. This proposal is very representative of what an OpenSCAD project can do for 3D printing amateurs. We show the process complete,…
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
Printablesdrewmoseley
ESP-F Devkit V4 Case - Pins Exposed
This is a pretty simple build. You may need to enable “Print Thin Walls” or whatever the appropriate setting is in your slicer.
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesLetzburger
Protective cap for exposed M10 screws with internal thread
Very simple protective cap for exposed M10 screw.
- Downloads
- 28
- Likes
- 5
- Rating
- 0
P
Printablesmika
A case for disposed razor blades
Print the case and the lid, and assemble the case by threading a piece of filament through the side and lid holes to function as an axle. Cut the filament slightly shorter than the axle hole and push it in. Print the lid upside down and…
- Downloads
- 28
- Likes
- 5
- Rating
- 0
P
PrintablesReeDoet3D
Cover for Raspberry Pi 40-pin GPIO Connector - UART pins exposed - GND and Pin1 indicators
Based on https://www.thingiverse.com/thing:1874648 but fully rebuilt (because of model artifacts I could not get rid of as easily as rebuilding) This 40-pin GPIO cover is based on the dimensions of the source thing. The remix is: 4 pins…
- Downloads
- 26
- Likes
- 4
- Rating
- 0
P
PrintablesBelBuilds
Half-Skeleton Zombie Bust – Exposed Ribcage Undead Horror
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesPaul Harker
TeensyROM+ (v0.4) Exposed Case
Case for the TeensyROM+ multi-function C64 cartridge by Travis/SensoriumEmbedded. Holy Paperclips Batman! Updated by request: Case tops now include paperclip hole access to programming button. No more taking the cover off for USB firmware…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
Printablesmt_benno
S8 Case Exposed Button Remix
I really like the remix by Forrestbond on thingiverse however it was annoying me that my finger contacts the edge of the case when a button is pressed. To fix this I recessed the material by side the buttons in by ~4mm allowing the users…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesItz_G3ermoX
HW-408 Amplifier ventilation case with exposed outputs and potenciometers
HW-408 Amplifier ventilation case with exposed outputs and potenciometers Shortly the case for a HW408 class-D amplifier
- Downloads
- 24
- Likes
- 2
- Rating
- 0
P
PrintablesNateForest2099
Neo posed statue (DMC4)
Neo from Devil May Cry 4 Created with Meshy ai The scale (as said for most of my prints) is not adjusted, but you can effectively change it to your desired preference.
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
Printableskalevamos
Frame walls for Core Frame System 250mm, Flat Frame Grind Block Repurposed. Flat 58mm setup.
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts. Flat 58mm…
- Downloads
- 21
- Likes
- 9
- Rating
- 0
P
PrintablesKorkzapfen
Repurposed Mk3S+ spool holder for Core One
I still had the spool holder from my old Mk3S+ and wanted to repurpose it to feed in filament from the top of the Core One (e.g. for very soft flex filament, which is impossible to be pushed through the PTFE tube to the extruder). The…
- Downloads
- 21
- Likes
- 8
- Rating
- 4
P
Printablesgrumpusbumpus
Reposed Robot
I posed this guy at the request of a community member. It was good practice creating an armature and applying it to a model in Blender. Maybe some folks will want to print this out as a decoration. Category: Vehicles
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
Printablesgmarsh23
Exposed-infill IKEA Rallen Qi Pad
If you've got a favorite infill pattern that you love the look of, this design will let you show it off :) Print this design with no top/bottom layers, three perimeters (suggested) and your favorite infill pattern/percentage. Takes the…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesMortarArt
Proposed Concrete brick compatible with Precious Plastic brick
The attached files show proposed geometry and test segments for a concrete brick with teeth that should allow Precious Plastic bricks to be placed on top of it. The mold files are intended to test shrinkage of concrete, so as to work out…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesIrons
Nerf Rival Kronos Pump Grip Picatinny Rail (for exposed magazine)
This is designed to be fitted over 1 3/4 inch PVC and the exposed magazine. The slots take 1/8" by 3/4" aluminum fat bars. The holes that fasten the bars are designed to take M3 screws, but can be bored out to take larger screws.…
- Downloads
- 15
- Likes
- 6
- Rating
- 0
P
PrintablesAshka 3D
composed seal / Sceau à composer
sceau simple/initiales ou sceau composable/personnalisable jusqu'a 10 symboles alphabet et chiffre possibilité de créer ses propres symboles (sceau vierge fourni) impression facile sans support remplissage 15%
- Downloads
- 14
- Likes
- 6
- Rating
- 0
P
Printablesasdfbandit
Decorative Imitation Steel Plates with Exposed Bolts
I went on a ski trip and decided I wanted to make an industrial looking frame for my projection screen. It's inspired by the ski map brackets in Vail. They're not strong on their own but they did hold my 3.5 inch trim boards together…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesGonkgamerYT
Pwnagotchi Case (No Battery Pack, Exposed HDMI)
A simple Pwnagotchi case designed for setups without a battery pack. The HDMI port remains fully exposed for easier setup, debugging, and external display access. What I used: Raspberry Pi zero WH Waveshare 2.13 Zoll E-Paper HAT+…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablesfablab iztech
Repurposed Cardboard Filament Spool Organizer
The product is designed to repurpose cardboard spools from finished filaments into an organizer. This product comes in four different versions with varying numbers of compartments. You can follow the design process from here:…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesReeDoet3D
PiCase for Ender 3 Remix - Camera cable hole - GPIO header partly exposed - room for cooling element
First off; I'm new to this, so this is far from perfect, but it fits my needs, it might fit yours :) After printing the Pi sleeve (by tobbi007, the first remix he did years ago https://www.thingiverse.com/thing:2889371) I found three…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesHakan
Repurposed spool holder for Core One - Remix for 10x5 magnets
I did not have such big magnets. So I made new openings for 10x5 magnets. Holes are press fit and you do not need glue.I did not have such big magnets. So I made new openings for 10x5 magnets. Holes are press fit and you do not need glue.…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesXanderMP
Magnets cover for: MAGNETIC Chainmail Wallet with exposed Magnets
I printed the nice design from SunShine, and it turned out great, but I wanted to hide the magnets without stopping the printer. Additionally, I had magnets with a diameter of 6mm but different thicknesses. So I printed these discs to…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesaccm
IKEA KALLAX - Glass Shelf (Insert) Repurposed
The IKEA KALLAX Glass insert (703.402.99) comes with a door and a glass plate to use as a shelf, but i never used those. Instead i looked online for something that could hold the glass vertically to create a display case that i dont need…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesRobertoooo
Tesla Wall Connector GEN2 box repurposed for ESP32‐S2 EVSE
Accessories to mount an ESP32‐S2-EVSE-DIY-ALPHA board, RCM, CTs, contactor, and surge protector into a Tesla Wall Connector GEN2 box. In case the factory electronics are faulty, this can revive in an open source form! Parametric in…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
Printablesdave
![Magnetic Badge (embedded or exposed magnets) [OpenSCAD]](https://media.printables.com/media/prints/dd50e7dc-e2af-48c7-a2ac-5ee0994fb470/images/12692312_d65b284b-03e9-4da8-9f71-6e75911bb480_ec199194-ad44-4720-b824-8d98567f3313/badge.png){kind=icon}
Magnetic Badge (embedded or exposed magnets) [OpenSCAD]
Stick labels from your label printer, stickers or whatever you like on this and have a cool and strong magnet! STL files have space for 8 tiny neodymium magnets (2 stacked per corner), making the finished product super strong. But due to…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
PrintablesJanos Kehl
Exposed door handle for 96mm hole spacing
Just a simple design I made some weeks ago for my IKEA doors in my studio
- Downloads
- 9
- Likes
- 5
- Rating
- 0
P
PrintablesAlanH007
Repurposed Desk clamp
I had left over hardware from a new desk lamp. I repurposed the left-over hardware to make a desk clamp for a headset. This was a simple design using Fusion360. Model does not need supports. I placed model on build place with center hole…
- Downloads
- 9
- Likes
- 2
- Rating
- 0
P
PrintablesJack Frost
Repurposed Yetix Mic Stand to Phone Stand
What: This print aims to reuse your discarded Yeti mic stand into a sleek phone stand for video calling and media consumption. It offers a tasteful yet subtle desk option. There are two versions in this repository. The first is mounted to…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
P
Printablesfreeutkukocaman
Repurposed Pot Nest
One day I found a discarded construction material next to a dumpster. Than I wanted to make it shine again like in its glorious days. Cut the wood 8 pieces 4*50cm and 4*21cm. Printed models from leftover filaments like how it's supposed…
- Downloads
- 7
- Likes
- 3
- Rating
- 0
P
Printablesshaks
KL Bumper O3 Exposed ELRS TPU
Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
- Downloads
- 5
- Likes
- 4
- Rating
- 0
P
PrintablesPhDGoSlowAncient
Christmas Tree 7" - 2 piece for mailing - Exposed Infill
This two-piece ornament is designed with exposed infill to create a unique artistic effect. Each piece is about 1/8" thick, making it suitable for mailing. To achieve the transparent infill look, I used these settings: Walls: 5, Infill:…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesEngineeringDIYplus
Exposed NVMe Frame V2 // Full Hex-Flow Edition (JMS583 + 2260)
Exposed NVMe Frame V2 // Full Hex-Flow Edition (JMS583 + 2260) This is a V2 Remix of the Exposed NVMe Frame . What’s New in V2? Dual-Sided Ventilation: I have added a matching hexagonal mesh pattern to the bottom floor of the frame.…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
Printables._.
Xiegu G7250 Control Head Front Covers (Screen Only, Full Face, Exposed Knobs)
Overview Three friction-fit front covers for the Xiegu G7250 detachable control head. Screen Only protects the 7-inch touchscreen and speaker grille and leaves every control usable. Full Face closes over the entire front, knobs included.…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesEngineeringDIYplus
Exposed NVMe Frame // JMS583 + 2260 Edition
Exposed NVMe Frame // JMS583 + 2260 Edition A high-performance, minimalist enclosure designed for the JMS583 bridge controller and M.2 2260 SSDs . This design ditches the bulky "black box" look for a sleek, PCB-hugging frame that…
- Downloads
- 3
- Likes
- 3
- Rating
- 0
P
Printableslordzogar
Wally-Vault: Repurposed Walmart Bag Spool Container
Wally-Vault: Reduce Plastic Retail Waste In Walmart stores everywhere, the sheer volume of produce and meat bags used daily is staggering. At the core of every roll is a high-density plastic spool destined for a landfill. These spools are…
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
Printables
Guy Sitting on Ground - Relaxed Posed Character
Capture a moment of quiet repose with this 3D printable STL model of a Guy Sitting on the Ground. This relaxed posed character is perfect for adding life and narrative to your dioramas, gaming scenes, or miniature storytelling setups.…
P
Printables
Artillery cannon 3d printable (must assemble, picture just to show how it's supposed to look)
I got bored and made this in tinkercad
P
Printables
Shy Girl Exposed
These models are intended for decorative and display purposes and can be freely scaled or customized for personal projects. 📃 Usage & Licensing 🔹 Personal Use: You may print and display this model for your own enjoyment. 🔒 Commercial Use…
P
Printables
Half-Skeleton Zombie Bust – Exposed Ribcage Undead Horror
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…