112 modeli
This is a pre-posed model of Godzilla Minus One. Scale the model to your device. The model is available as a rigged model so that you can post the model and the move to print the model. I posed Godzilla to my liking and printed and then…
Use the Ball Buddy to customize your golf ball. For SLA or FDM single filament printers this model has two versions of the magnetic golf ball stencil holder (exposed and covered magnets). Both versions made up of two ball holder halves…
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
UPDATE: recommend this sliced version instead: https://www.thingiverse.com/thing:3936411 Another rip from Monster Hunter: World Fun Fact: Feed him with any kind of meat to make him glow (and berserk, see render) Contains few overlaps from…
Another model from Monster Hunter: World All design and copyright belong to CAPCOM Category: Creatures
I took the Voron enclosure part and made it longer so I could use it on other projects.
Sliced version of https://www.thingiverse.com/thing:4098730 file name explanation: First char: A = arm, B = body, H = head, L = leg, W = wing, T = tail second char: L= left, R = right S suffix = spikes Union-ing spikes resulted in failure…
You'll be able to replace your original print head housing with this exposed print head setup using only the original screws. SETTINGS: Slice the model upside-down (see photo) with a tree structure support in a zig zag pattern only…
wifi boad no sd card and no exposed Wi-Fi chip
For the conscientious golfer who likes to fix their ball marks made due to hard impacts with the green surface by their ball so that other players can also enjoy a smooth green surface. Usage Divot repair tool - Ergonomic design with…
A sliced version of https://www.thingiverse.com/thing:3710457 for best seams location. See images for recommended orientation Internal tube cavity can be used to hold LEDs for glowing effect. Use transparent filament! May require some…
Posed Figurine statue of the Mandalorian
Another rip from Monster Hunter World, ice-screaming wyvern "Legiana" Category: Creatures
Remixed base block from this https://www.printables.com/model/479716-ps5-dualsense-controller-phone-mount
I designed this because I wanted to rack-mount my Mac mini with the I/O accessible from the front, and I couldn’t find anything that actually fit my needs. The design is intentionally simple, but it does the job well. The front panel is…
Posed Revenant from Doom. One posed model and pieces of the overall character that I eventually glued together. I haven't tried printing the entire thing all at once, not sure if that will work. Attached photos of a painted version. Print…
Izolovaný pěchotní srub postavený ve II. stupni odolnosti. betonáž: 5. - 10. 8. 1936 kubatura betonu: 1530 m3 osádka: 34 Objekt se nachází v katastru obce Šilheřovice u Ostravy. model je v měřítku 1/72
S I Z E S INCHES MM outer diam. x height outer diam. x height BASS DRUM 22 18 558.8 457.2 FLOOR TOM 16 16 406.4 406.4 SNARE DRUM 14 6 355.6 152.4 TOM 13 13 9 330 228.6 TOM 12 12 8 304.8 203.2 Dimensions refer to the most common sizes. In…
Own a cat? (or does it own you?) own a 3D printer? got some empty filament spools? repurpose them with this clip-on ball chase ring that will hopefully keep your cat entertained for hours and be the source of many an adorable moment! The…
Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.
Raspberry Pi5 case with the cpu cooler fully exposed
Hey you crazy UL hikers! This is a Fusion360 Port of Jan Rezac's air horn support canister for people to download and adjust a customer sized diameter. If you're unfamiliar with this idea and what its used for, check out this BPL thread…
Exposed the magnets so they can be inserted after printing.
Modified the original by flipping the top half so the port can now be open without taking the SSD from the case.
This model https://www.printables.com/model/136844-herringbone-geared-turntable-roller-bearing is an absolutely beautiful and functional self centering thrust bearing design. It looks good just sitting there, but I wanted to make a…
This is an alternative case for the TeensyROM cartridge for the Commodore 64. It's designed to be easy to print (no supports), leaving some of the cartridge's larger components “exposed” through cutouts in the case. Significant…
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Remix with gaps for all ports and a mirrored mounting plate option. See original model https://www.printables.com/model/705053-mountable-esp32-screen-cyd-case-with-pen-holder for instructions. All credit to @Sijeveenstra_996957 for the…
Use 4xM3*4 heat inserts and 4xM3*8 counter sink screws for assemble. Freecad design file included incase you need to make your own change. Updated: V2 version extended the edge by 1.5 mm so that TF card can be protected by the case.You…
This an exposed head for the dummy 13, it has a skull, spine, tounge, and teeth
The juxtaposed Y-splitter by @RomainSCHWALL_687256 fixed my AMS retraction issues with PLA-CF, but in turn I had issues with non-AMS filament through the bypass path hitting the edge of the PTFE tube. This remix makes the inner diameter…
Wanted small(est) AirTag enclosure that doesn't expose it. You can add your logo or text on the enclosure (best to put it on bottom, so it will keep stable orientation regardless how hard you close the top cap). Fusion source file is…
Capture a moment of quiet repose with this 3D printable STL model of a Guy Sitting on the Ground. This relaxed posed character is perfect for adding life and narrative to your dioramas, gaming scenes, or miniature storytelling setups.…
Very Easy to print Female Tabletop Miniature Thei mage showes Prusament Bronze Ender3V3 0,2 Noozle / 0,15Layer 1hr Printtime Supportfree POSE as shown in the image
Originally, I wanted to design a witch broom for Halloween — but somehow the witch turned it into a mop ! 🧹😅 The articulated mechanism is inspired by this articulated snake model , but completely remodeled and adapted by me for this…
Remix of lightninglord88 fan duct ( https://www.thingiverse.com/thing:4816138 ) with the part than covers the manual feed gear removed (crudely) in maya. STL export broken for me so its an OBJ but should import fine. Cura was fusing the…
I made a Zombie Hand in a few different poses. Coming out of grave To place on the ground, to let people believe, that a zombie stretches its hand out of the ground Bowl Holder Place on the wall to let 2 Zombiehands Hold your Bowl with…
guy from apex, posed with mixamo and blender printed with default settings and organic supports file is a little broken, please share if you fix it
Please click ❤LIKE❤ if you appreciate my work 😊 Flexi Demon Hand – Articulated Skeleton Hand with Exposed Bone A creepy flexi demon hand with articulated fingers, skeletal details and a distinctive exposed bone extending from the wrist.…
Please see the announcement Video where I "improve" 5 different 3D-printable designs: https://youtu.be/en_qw3RvsaI After having a lot of success with my Chainmail wallets, I decided to update the link design ever so slightly and make it…
Dummy 13 skull head with brain exposed
Variant of the snap lid case for the "Smallest possible ESP32-CAM" to be able to use the GPIO headers.
Like many others, I purchased an Ikea Svallet lamp to cheaply salvage an E12 Socket for Frank Deschner's Moon Lamp. Several other users, including CJPrints and veritas, have created alternate bases that can receive this Ikea lamp base. In…
The magnets are opposed to each other so the switch glides repels over itself and creates a satisfying clicking feeling when they finally catch on themselves. The simplicity of the design does not do the satisfying tactile feeling…
I made John S' case for my S22 but my wife liked it, but she had an S22+ after some trial and error I resized and repositioned the button sections to fit her Phone… I posted the base file but the photo is one I cut out her nickname on the…
Dummy 13 Skull Head with Exposed Brain resized 200%
Adjusted the right side to mirror the left cutout in order to expose the 5v and GND rails on the Octopus. This allows you to run a DuPont connector where previously it was blocked by the original midpiece design.
General An opposed-piston engine is a two-stroke internal combustion engine where two pistons move toward each other within a single cylinder, with combustion occurring between them, eliminating the need for a cylinder head and…
This cool pencil holder can be printed in any material! in the premade G-Code there is color change included like it can be seen in the pictures, and don't worry, you don't need any MMU to do the color change, simply switch the filament…
This is a case for the BTT PI 1.2 with the DC input exposed in case you need to power with the printer's psu.
Dummy 13 Skull Head with Exposed Brain resized 250%
What if your obsolete hardware didn't have to become e-waste? What if you could give your discarded tech an infinite afterlife? Project INFIN_IT is a fully modular, all-in-one luggable workstation engineered around the Framework Laptop 12…
This locking battery mount for the Ryobi ONE+ 18v battery allows you to add easily swappable power to all your projects. The model has two holes (center distance = 1.25") for mounting, and a 0.125" chamfer at the base of a 1.209" wide,…
I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119 The USB cable in the picture is connected to the printer, I needed the GPIO ports for…
NOT MINE (obviously) There wasn't enough troodontids on this sight. The original upload of this model on sketchfab was lower poly so I simply made it higher poly and printable Troodon by Frontier Developments
I got bored and made this in tinkercad
This is a simple case for a Wavgat branch D1-Mini. I could not find one that fit this specific board with the pins exposed so I created this.
CraVeg's Case for the Fish8840 or other RipOff Component Testers but with exposed SMD testpads Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: No Resolution: 0.3 Infill: 40% Category: Electronics
If you're looking for a mounting option for your SanDisk Extreme Portable SSD (SDSSDE61-xT00), this might be what you're looking for! Intended for use with a standard 1/4" x 1/2" wood screw (about 6.3mm x 12.4mm) you can get at any…
After watching this YouTube video by Jeff Geerling . I printed and built the Air Gradient. In Jeff's video, he mentioned that temp sensor might give higher readings because of it's locations in the case. I noticed what I believe to be…
We have a Telegram Group called "Diseño 3D" in which every week, a user proposes a design to be developed. This proposal is very representative of what an OpenSCAD project can do for 3D printing amateurs. We show the process complete,…
This is a pretty simple build. You may need to enable “Print Thin Walls” or whatever the appropriate setting is in your slicer.
Very simple protective cap for exposed M10 screw.
Print the case and the lid, and assemble the case by threading a piece of filament through the side and lid holes to function as an axle. Cut the filament slightly shorter than the axle hole and push it in. Print the lid upside down and…
Based on https://www.thingiverse.com/thing:1874648 but fully rebuilt (because of model artifacts I could not get rid of as easily as rebuilding) This 40-pin GPIO cover is based on the dimensions of the source thing. The remix is: 4 pins…
Add visceral horror to your collection with this Half-Skeleton Zombie Bust , a striking undead display model sculpted with unsettling anatomical detail. This terrifying figure features an exposed ribcage, skeletal facial structure, and…
Case for the TeensyROM+ multi-function C64 cartridge by Travis/SensoriumEmbedded. Holy Paperclips Batman! Updated by request: Case tops now include paperclip hole access to programming button. No more taking the cover off for USB firmware…
I really like the remix by Forrestbond on thingiverse however it was annoying me that my finger contacts the edge of the case when a button is pressed. To fix this I recessed the material by side the buttons in by ~4mm allowing the users…
HW-408 Amplifier ventilation case with exposed outputs and potenciometers Shortly the case for a HW408 class-D amplifier
Neo from Devil May Cry 4 Created with Meshy ai The scale (as said for most of my prints) is not adjusted, but you can effectively change it to your desired preference.
Flat frame grind block has two mounting holes. Utilizing those, theese walls can be printed in smaller parts. In addition of a 250mm aluminium core + hardware, you only need two Flat frame grindblocks and four 8mm axle bolts. Flat 58mm…
I still had the spool holder from my old Mk3S+ and wanted to repurpose it to feed in filament from the top of the Core One (e.g. for very soft flex filament, which is impossible to be pushed through the PTFE tube to the extruder). The…
I posed this guy at the request of a community member. It was good practice creating an armature and applying it to a model in Blender. Maybe some folks will want to print this out as a decoration. Category: Vehicles
If you've got a favorite infill pattern that you love the look of, this design will let you show it off :) Print this design with no top/bottom layers, three perimeters (suggested) and your favorite infill pattern/percentage. Takes the…
The attached files show proposed geometry and test segments for a concrete brick with teeth that should allow Precious Plastic bricks to be placed on top of it. The mold files are intended to test shrinkage of concrete, so as to work out…
Bring some undead character to your Halloween collection with this expressive zombie head. An open skull reveals a brain with exaggerated folds, while bulging eyes, sunken cheeks, and crooked teeth give the face a creepy cartoon…
a lowish poly pig with a lil nub on his head not much to say its just a pig print it for fun times
This is designed to be fitted over 1 3/4 inch PVC and the exposed magazine. The slots take 1/8" by 3/4" aluminum fat bars. The holes that fasten the bars are designed to take M3 screws, but can be bored out to take larger screws.…
sceau simple/initiales ou sceau composable/personnalisable jusqu'a 10 symboles alphabet et chiffre possibilité de créer ses propres symboles (sceau vierge fourni) impression facile sans support remplissage 15%
I went on a ski trip and decided I wanted to make an industrial looking frame for my projection screen. It's inspired by the ski map brackets in Vail. They're not strong on their own but they did hold my 3.5 inch trim boards together…
A simple Pwnagotchi case designed for setups without a battery pack. The HDMI port remains fully exposed for easier setup, debugging, and external display access. What I used: Raspberry Pi zero WH Waveshare 2.13 Zoll E-Paper HAT+…
The product is designed to repurpose cardboard spools from finished filaments into an organizer. This product comes in four different versions with varying numbers of compartments. You can follow the design process from here:…
First off; I'm new to this, so this is far from perfect, but it fits my needs, it might fit yours :) After printing the Pi sleeve (by tobbi007, the first remix he did years ago https://www.thingiverse.com/thing:2889371) I found three…
I did not have such big magnets. So I made new openings for 10x5 magnets. Holes are press fit and you do not need glue.I did not have such big magnets. So I made new openings for 10x5 magnets. Holes are press fit and you do not need glue.…
I printed the nice design from SunShine, and it turned out great, but I wanted to hide the magnets without stopping the printer. Additionally, I had magnets with a diameter of 6mm but different thicknesses. So I printed these discs to…
The IKEA KALLAX Glass insert (703.402.99) comes with a door and a glass plate to use as a shelf, but i never used those. Instead i looked online for something that could hold the glass vertically to create a display case that i dont need…
Accessories to mount an ESP32‐S2-EVSE-DIY-ALPHA board, RCM, CTs, contactor, and surge protector into a Tesla Wall Connector GEN2 box. In case the factory electronics are faulty, this can revive in an open source form! Parametric in…
Stick labels from your label printer, stickers or whatever you like on this and have a cool and strong magnet! STL files have space for 8 tiny neodymium magnets (2 stacked per corner), making the finished product super strong. But due to…
Just a simple design I made some weeks ago for my IKEA doors in my studio
I had left over hardware from a new desk lamp. I repurposed the left-over hardware to make a desk clamp for a headset. This was a simple design using Fusion360. Model does not need supports. I placed model on build place with center hole…
What: This print aims to reuse your discarded Yeti mic stand into a sleek phone stand for video calling and media consumption. It offers a tasteful yet subtle desk option. There are two versions in this repository. The first is mounted to…
One day I found a discarded construction material next to a dumpster. Than I wanted to make it shine again like in its glorious days. Cut the wood 8 pieces 4*50cm and 4*21cm. Printed models from leftover filaments like how it's supposed…
Paramètre d'impression: 50% en gyroide TPU 95A sainsmart/DFR pour moi le meilleur tpu
This two-piece ornament is designed with exposed infill to create a unique artistic effect. Each piece is about 1/8" thick, making it suitable for mailing. To achieve the transparent infill look, I used these settings: Walls: 5, Infill:…
Exposed NVMe Frame V2 // Full Hex-Flow Edition (JMS583 + 2260) This is a V2 Remix of the Exposed NVMe Frame . What’s New in V2? Dual-Sided Ventilation: I have added a matching hexagonal mesh pattern to the bottom floor of the frame.…
Overview Three friction-fit front covers for the Xiegu G7250 detachable control head. Screen Only protects the 7-inch touchscreen and speaker grille and leaves every control usable. Full Face closes over the entire front, knobs included.…
![Magnetic Badge (embedded or exposed magnets) [OpenSCAD]](https://media.printables.com/media/prints/dd50e7dc-e2af-48c7-a2ac-5ee0994fb470/images/12692312_d65b284b-03e9-4da8-9f71-6e75911bb480_ec199194-ad44-4720-b824-8d98567f3313/badge.png){kind=icon}
