Counting matching models…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…
This is a stackable Airsoft Suppressor Baffle that I made for Surefire LLC replica suppressor. Print as many as you need and just stack them. Each one is 16.6mm high, and they have 1.6mm overlap, so a stack will be N*15mm+1.6mm high,…
The Principle Suppressors reduce the sound of the explosion by trapping and slowing down excess gases. With airsoft silencers, the most important thing is to reduce the high frequencies, because they are the main culprit for revealing the…
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one. Dimensions: 23 x 35.5 x 150mm The baffle…
This socom silencer should be compatible with my gb-22.
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Designed in collaboration with my wife (the knitter), to at least match the performance of her favourite mass-produced injection-molded knitting clips. (I figured there was not much use making something she wouldn't use anyway. Took me 6…
Important notice: First thing is first:) This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to buymeacoffee or paypal, that will be greatly appreciated. I know…
I couldn't find a suitable free tracer housing for my Airsoft guns so I designed my own. It fits an xcortech tracer down the end, so you can have extra barrel length inside the suppressor if needed. I added some electrical tape around the…
cool table decoration
Do you like tiny suppressor like me? I present to you my little custom suppressor for the AAP-01! You can put this bad-boy on your airsoft replica with the 14mm CCW thread to have a really cool looking gun! !!!!!!! AIRSOFT ONLY !!!!!!!…
made using 3 views from the internet I didn't have accurate fuselage and wing sections so everything is just an approximation, maybe someone that has foaming filament can use it to make an edf rc plane out of it
Your printer needs to be able to print fine threads. I used some silicone grease to make them easier to fit/screw on. NO SUPPORT NEEDED :) The threads are m30.5x1 You can "infinitely" stack this suppressor
I remixed n.leinad great design to make it a bit more of a workhorse. I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable…
There's two versions, "OTB" (Over The Barrel) has the thread around the middle of the silencer and the normal version has the thread at the base. Silencer dimensions: 157mm x 35mm OTB: The barrel hole is 15mm and the thread starts 70mm in…
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
I print this with some brim, because it's rather tall for how little area it has to adhere to the print bed. Needs no support. I printed it in PLA but I assume any filament will also work fine. Should fit any airgun with a ½"-20 UNF…
Hi, thanks for downloading my file! I made this suppressor/silencer for my Novritsch SSG24, because the one Novritsch sold on his website was a bit too expensive for my taste. How it's made This silencer is made up of three easy-to-print…
Easy to print feet to help stop the printer transferring resonance vibration to the work table. If your new printer turned your table into a drum, you want these. Cheaper, easier, lighter, and better looking than a slab of cement. No need…
Rosslyn Chapel Master and Apprentice Pillar.
SP-01 Shadow 119x22mm, 1/2x28, cal. 6.0mm SP-01 Shadow 119x22mm, M12x1, cal. 4.5mm
Insert this baffle into a Donny FL suppressor to make it quieter. I've experimented with several different types of baffles and this is the best one I've found. Mine is for a PCP .22, - but this baffle could certainly be modified or…
An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.
Hey, this is my first Thing. I design this holder for a hunting friend of mine. Feel free to used it. High: 150 mm deep: plate 6 mm, holder: 76 mm width: 70 mm hole: 55 mm diameter I used supports only for the top of the hole. Print…
Why My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping. Features Pre-modeled threads. The thread pitch on…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This piece is currently a work in progress as I have not finished printing it or tested it yet. NOTICE: This suppressor is intended only for use on BB guns / Air Rifles. This in no way is meant for production for or use on actual…
This is meant as silencer/suppressor replacement for SPA PP750 cal. 5.5 mm internal suppressor. I accidentally lost the originals, so I did this one. I've also put cotton wool outside the K-baffles, works better than original imho. Each…
A 3D printable mock suppressor for airsoft guns. The thread is inset inside the suppressor by 50mm. The suppressor is suitable for RIFs with a threading of 14mm CCW. The front end of the suppressor unscrews to allow access to the inside…
Air rifle moderator, for use with sound dampening felt or foam . 193mm overall length, the tube is 185mm long, 40mm outer diameter, 36mm inner diameter, each cap extends 4mm out of the tube. Inspired by the many aftermarket designs that…
Belt buckle quick release, Print with 80% infill for more strength in the locking tabs.
------------------------------------------------------------------------ List of released EOS rotor designs (subject to be actualized frequently) EOS_01 rotor design → this post (…
You will need to glue individual parts together.
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. This is a simple fast…
This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…
Its a cat scratcher... print it, grab it, play with your cat with it.
Hey all, Made this Suppressor while I had some down time and had nothing to do. Fits a 14MM Counter Clockwise thread that is common on most Airsoft rifles. Made this for my G&G combat machine. Adds about 155mm of extra outer barrel length…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The throwing knife has…
A stand for the Garmin R10 Approach, that will allow you to level it on the course, or at the driving range. The hole in the middle if designed for a 32x7 mm levelling bubble. Print at 0.10 layer height for best results.
This is a very old design. Please look at my other moderators for a current design This moderator is for air gun use only! Do not attempt to mount it to any other type of gun! Follow you local laws regarding moderators! This moderator has…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. The Saxe Knife has a…
This is just my take on the commonplace hinged rugged box design. They're all much of a muchness, and mine was VERY loosely based on Yanev's design: https://www.printables.com/model/39729-tool-box-parametric I literally just made an…
Adorable little bunny magnets that are easy and quick to print and a great way to make neodymium magnets cute. The little ears provide some grip to lift the bunnies off the fridge in a humane way. Finally tried to pause at layer in a…
I recently bought a Wolverine MTW and wanted to have an integrated/nested suppressor in the handguard, but the more I looked the more I had difficulty finding one that would fit AND that I liked. The internal diameter of the MTW's…
Reproduction of the Apprentice Pillar inside Rosslyn Chapel. Reduced polygon count so you can import it to Tinkercad. Category: Scans & Replicas
print with brim for better adhesion
print thread side up 100% infill 0.2 mm layer height
I wanted to bag a disc at tournaments that I made , so I started the process of designing a putter that was fairly stable, but could handle some anhyzer/flex. During the design process I realized the disc also floats in water pretty…
print it, drink your Energy, make a hole in the top, size as large as the opening for adapter (14mm) glue it together. ready to shot.
Hecho para un proyecto personal, estas abrazaderas sirven para mantener la tubería tipo PPR estándar en su lugar. Verifica la superficie de contacto antes de imprimir. Dependiendo de tu impresora puede que necesites escalarla entre 1% y…
Airsoft only. Not for firearms. Barrel extension / mock suppressor for King Arms PDW 9mm SBR M-Lok airsoft rifle for extending the barrel for a 363 mm ( https://www.amazon.com/gp/product/B078SC421D/ ). First version broke at the thread…
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
This is only guaranteed to work with 16oz white monster energy cans due to some flavors being different sizes. You're welcome to try others but don't say I didn't warn you. Make one cut around the can (I've found that the best/easiest…
After printing out another sight pusher I decided I wanted to make a version that was smaller and quicker to print with a captured pusher. I also wanted to use more common hardware and I wanted it to accommodate supressor height sights up…
The original file for this suppressor had issues where the inner diameter was too small for a 6mm BB to pass through. This file has a larger inner diameter as well as a larger overall body with support for 14mm CCW threads. This…
The original creator for this created a wonderful design for a tracer housing or just a great mock suppressor. However, only long and short versions were available. This is a medium sized version of those in which is about an inch shorter…
Update 20240229: Added step file in case any one wants to do a bit of DIY. -------- I've been looking for a mock suppressor that: 1. Looks long but doesn't add too much to the overall length of the gun. 2. Slim but also fits a tracer…
Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…
This was inspired by the Ranger's Apprentice stories by John Flanagan and the fan discussion here (https://flanagan.fandom.com/wiki/Flanagan_Wiki). I wanted to keep it simple and safe for those younger apprentices. There are 3 parts to…
First of all thanks to krom for the beautiful original model and sharing the f3d file. You should print the watering can with PETG . With PLA there is a risk that the can will leak. I printed with 100% infill to be on the safe side. It…
Miniatures of all detectives and monsters from the add-ons suppressed memories and recurring nightmares miniatures. Mansions of Madness Second Edition — Recurring Nightmares: 8 detectives: Michael McGlen, Sister Mary, Gloria Goldberg,…
I beefed up the frame by using 5 perimeter walls and adding a second spot to hold the slide on both sides. The pusher was redesigned to fit suppressor height sights. I added a hole in the wrench so it stays captured to the tool and a…
Designed to fit in the Avengers QD Mock suppressor that is modeled after a Knights Armament suppressor. I had some problems with the “.20 SPEED” preset, but “.20 STRUCTURAL” worked fine. Mock Suppressor:…
On my second flight day my Apprentice S15e experienced a rapid unscheduled descent and consequently partial disassembly. The (let's name it...) crash wasn't very hard, but hard enough to brake the front wheel hinge and the cowl. A new…
This is a very simple MOCK airsoft suppressor i designed for very specific reasons. i have a cyma standard ak 105 carbine. CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft…
Freezer and Food Bag Clip
A remix of Crosman 1377 suppressor V2. The original was a 5mm hole for 4.5mm (.177) pellet. This has a 7mm hole for 5.6mm (.22) pellet. I also made this a two piece threaded design. This makes managing supports simpler. Also, if you break…
Bei 15cm Druckhöhe hat der Halter einen Innendurchmesser von 6cm. Die Aussparungen für die Magnete sind in der aktuellen Version für 20mm Durchmesser und ca. 5mm dicke Magnete gemacht. In der Mitte hatten meine Magnete ein Loch, das ich…
Sorcerer Mickey by jprzybylski is absolutely amazing. In fact, it's a little TOO amazing. My system had trouble working with such a high resolution model. I converted this to an STL and reduced the resolution by half, but even at that,…
A replica of the muzzle device on Han Solo's DL-44 Blaster. It is set up to work with 1/2" x 28 threads. it will thread onto AWCY's Proto Barrel ends (available elsewhere). Either the "One Part Option - Permanent" or the “Two Part Option…
Silencer adaptor for use with Weihrauch HW40/Beeman P17. Fits 1/2-20 UNF threaded moderators. Held in by friction. The options to use a suppressor with the HW40 were limited. This works pretty well. Only issue is that when attached, a…
This silly model is scaled to a standard domesticated pet rat (female rat, sizing may vary). It is intended to be segmented and connected together with string or a rubber band. Most likely, you may have some difficulty convincing your rat…
This is an overstable approach disc similar to a Discraft Zone, or MVP Entropy. Prints well in PLA, but for best results and durability, print in TPU.
The suppressor goes over the muzzle brake . Thread on bottom of the muzzle brake is 14x1L , compatible with most AK style replicas , muzzle break - suppressor body joint is a M22 standard thread with 1.75mm clearance , suppressor-end cap…
Inspired by the OREA Negotiator filter press tool, this model is designed to allow you to press your coffee filter into place for the ‘no-bypass’ method of pour-over coffee brewing. The general conical shape and central stem are about the…
I found this on Thingiverse, and thought that I should upload it here. "Found out what the range was on my transmitter unfortunately and crashed my Apprentice STS. Never liked the stock cowl design so I came up with this. Use a 10% infill…
Replica Glock-18 found here → Click Me The suppressor isn't modeled after any specific IRL suppressors. It's meant to be simple. Installation: Slide the suppressor into the barrel. The side with the rifling will go into the barrel and use…
NOTE: The revised version fixes a few minor errors and adds additional vertical support. These were designed to allow you to mount multiple suppressors of varying calibers to different surfaces including walls, safe doors, etc… These…
Keychains for teacher appreciation. First Layer is .3, rest of the layers printed at .15. Starting with red or pink! Add pause at 1.65mm and change red (or pink) to white Wait to cool off, pop off the plate and add keychain . I glued up…
Filament leftovers trash / recycle bin (approx. 100x100x200mm). Have fun to print ;)
Found this but saw that the teeth failed added some supports just in his mouth. Will print later and update results. Edit: Had to change XY compensation to 0.1 (Prusa Slicer) as the supports wouldn't appear in the slicer. Print Settings…
Made for 14mm negative threading. The single module threads onto itself. Based on jeffreyyyd's Basic Airsoft Suppressor on Thingiverse. https://www.thingiverse.com/thing:2505514
a remix of the extended nerf barrel with a suppresser.
Tlumič výstřelu s vnitřním závitem M12x1
I found this on Thingiverse, and thought I should upload it here. The original file was created by sutekh, but it was broken, so Rickmcolorado repaired it. Here's the original post: “A friend with an Apprentice needed a bulked up motor…
I designed this suppressor in a way that you dont need an special threads to affix it to your airsoft gun. You put the small cap over your barrel's threads, add the Brighter C and tighten, and then add the suppressor over top. There is…
I have always been looking for an articulated arm to put a vise or different tools/supports to work with. Every one of them that I printed from already existing model has the same problem: tightening it to much and you loose any sort of…
all kinds of different combos, outer shells, internals, end caps with and without holes for gas/sound to escape all of them fit together except for the long version, the longer version will still work with the endcaps but also need a…
Do you want to have a unique and nostalgic piece that reminds you of the classic animation style? Then you need the Low Poly Sorcerer Mickey Mouse, a 3D printable model that lets you create your own custom figure of Sorcerer Mickey Mouse…
This is an airsoft barrel extension styled for the Classic Army X9 Nemesis ARP. I haven't formed the threads for screwing onto the outer barrel; instead it is sized for the treads to cut in themselves. This will give up to 100mm extra…
Short, stubby and hexy suppressor. Bit of a play around in Fusion, someone might want it :) 14mm ccw thread. Print without supports at whatever settings you fancy, rafts not required.
[EN] Airsoft MK18 Mock Suppressor / Silencer (14mm CCW) Custom tactical mock suppressor designed to fit the MK18 airsoft replica. Features a standard 14mm Counter-Clockwise (CCW) thread, making it fully compatible with most M4/AR15…
Approximation of a Tamagotchi shape based on photos and rough measurements.
Functional suppressor that reduces noisy shooting noise, for the double eagle M904G that fits inside the handguard. It is compatible with other rifle models with 26mm thread.
