9,380 models
Stealth Press 1 Important! As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version. Stealth Press 1 revision will remain accessible for…
Print approx. €7.88–€9.63 excl. taxPreliminary estimate for one variant
This model is a REMIX of 3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260 It's modified to fit the Prusa MK3S+ printer and it has several improvements : Smaller base, so it can fit to the printer bed Divided…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
When installing heat set inserts, a press tool can be a great help to ensure everything is aligned and straight in the end. And if you have a Dremel anyway, the Dremel Workstation can be a very versatile addition to your tool collection…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
*Update Nov 16, 2024: Many asked for a handle design with angled spokes like on a drill press, so I have now added a modified handle design (v4.2) that accepts threaded rods angled at 25 degrees. There are also threaded rods, and rod…
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
This thing was crowd designed by the members of the Espresso Aficianados Discord . If this design or espresso interests you, hop in and say hello! The Tool A nine pronged WDT tool. This was designed for 0.4x75mm 0.35x75mm acupuncture…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
Support m e & Buy a T-shirt This is the second version of the can press allows to easily compress used cans so they take up as little space as possible. It's universal for all sizes of cans. T-shirt Support m e & Buy a T-shirt
Print approx. €13.97–€17.07 excl. taxPreliminary estimate for PETGSource material: PET
There are numerous designs out there of clips that secure the lid on IKEA Samla (Filament storage) boxes. But I could not find any that really presses the slightly overhanging lid onto the box to keep it as air tight as possible without a…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Printing parameters: Material: PETG Resolution: 0.2 mm Perimeters: part 1/2 and cutter: 4 part 3/4: 10 part 5/6: 15 Supports: only part 5/6 overhang Assembly: Fix hinge parts with superglue (e.g. Cyanoacrylate) First add parts 5 and 6 to…
Print approx. €4.71–€5.75 excl. taxPreliminary estimate for PETGSource material: PET
High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter. From the outside,…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for PETGSource material: PET
This a remix of the original by kapy27. The additional weight (8x M10 nuts) added and inprinted to the base plate. Levers are formed from M6 long bolts. Better and more stable pillar support. Print instructions Category: Machine Tools…
Print approx. €14.60–€17.84 excl. taxPreliminary estimate for one variant
A simple burger patty press designed to be strong enough so you can really pack your patty tight. The bottom is removable so your burger just pops out. Waxed paper separator discs in a variety of sizes are readily available on Amazon.…
Print approx. €7.72–€9.43 excl. taxPreliminary estimate for PETGSource material: PET
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for PETGSource material: PET
This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Articulated surprise gift box: Educational, its articulated base will allow you to surprise your friends with a surprise gift. Customizable, its pieces are printed separately, you can use different colors without needing a multi-material…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Hi, this is my attempt to hopefully reduce the spread of the coronavirus or other germs, I call it the "Savegrabber". It is a hook-like device that allows the opening and closing of doors without touching the handle. There is also a tip…
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Compact Remix of my High pressure nozzle to clean your pool filter cartridge from inside out. There are several commercial cartridge cleaners available. But all those just try to clean in the same direction as the dirt entered the filter.…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for PETGSource material: PET
These print profiles (or “presets” as the kids are now calling them) make for faster prints, compared to Josef Průša's profiles of similar Z-axis resolution. They can often produce fantastic aesthetics despite their speed, but their focus…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Eyeballs for your Red-Eyed Crocodile Skink!
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
"Linear advance" (also called "K parameter") controls how to compensate for the pressure difference between “slow” and “fast” extrusions. This value needs to be correct for clean high-speed prints and depends on the extruder model, nozzle…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Make a useful drill press from commonly available parts. Total cash outlay: around $20. This tool has height and speed adjustment built in. A full description of what goes where will be added over time. --2025_October: Hi gang! Another…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
This is a remix of the original File by Back37strad. My main goal for this was to make an actual knob smaller compared to the original in height. You can see in the images how it compares to the standard knobs on my beautiful Ibanez…
Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET
Turnable Nespresso Tower in two versions: Standard Version to store 42 capsules Extended Version to store 60 capsules Optional Covers There are a few different covers you can choose: blank cover with text: Coffee Time with coffee cup 3…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
Need: Lens cap that can help prevent scratches and excess dust on the front element. This is my take on a solution to that need. This design uses common springs found in ball point pens. The spring dimensions are 4.5mm Diameter and 18mm…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A practical model for pressing all sizes of cans. Useful if you want to throw away the cans and save some space in the bin. In many countries, there are collection bins for aluminum waste. Beware, in some countries, it is not advisable to…
Print approx. €13.72–€16.77 excl. taxPreliminary estimate for PETGSource material: PET
If you like to dry leaves and flowers for their preservation, I suggest you build this press. Perhaps, it can also be useful for other tasks. The pieces are designed to fit solidly and have no looseness. You may need to remove the burrs…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print feet to help stop the printer transferring resonance vibration to the work table. If your new printer turned your table into a drum, you want these. Cheaper, easier, lighter, and better looking than a slab of cement. No need…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for PETGSource material: PET
vytlačte ze zubní pasty vše
Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant
Nespresso Capsule Holder - remodeled
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
111mm X 84mm Drill Gauge: 9.00mm M3* 12mm and M3 locknut
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
A handy device for pressing bricks of ground flower for your PAX 2/3/Plus vaporizer. There's an original version from the vape manufacturer for the same purpose, but that one sucks: it's extremely brittle and breaks after not that many…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
Print approx. €15.04–€18.39 excl. taxPreliminary estimate for one variant
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Print approx. €8.25–€10.08 excl. taxPreliminary estimate for one variant
Update [2024-11-12]: Just to make clear, there are several versions to use according to printer capability: 0.20 clearance 0.35 clearance 0.50 clearance Original Also changed the position of the model, to half-open, so it is easier to…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
A box with lid and a clamp to secure the lid in place. When clamp is printed in a different color, it looks like a present. Designed to be printed without supports. The file is set up to be 80x80x80 mm, but it can be scaled in the slicer.…
Print approx. €2.14–€2.61 excl. taxPreliminary estimate for one variant
Dremel Pillar Drill (Drill Press) Precision pillar drill stand for a Dremel giving a plunge depth of about 70 mm. Any Dremel that has the ‘standard’ 16 mm screw at the business end should fit but I’ve only tested this with the Model 800.…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This gcode uses the following parameters: Nozzle temp: 210 Bed temp: 60 Input Shaper: off Pressure Advance Factor: 0.1 until 0.5, steps 0.02 Pressure Advance Smooth Factor: 0.06 I like the print tuning guide from Andrew Ellis and tried…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
Hello 3D-Friends, this is a ready to print gcode for Prusa XL to calibrate the k-factor for pressure advance (linear advance) for PLA. It was created with Prusa Slicer 2.8.1 and this great site:…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Introducing the "Sewing Tool: Thang and loop pressing bar"! This innovative tool seamlessly combines the precision of the "That Purple Thang" with the functionality of the Loop Pressing Bar . The "That Purple Thang" excels in maneuvering…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Simple base for the portafilter to have a fixed position for tamping your coffee. It fits specially for the Sage / Breville barista express portafilter with a basket size of 56 mm. The top opening has a size of 61.3 mm.
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl designed for me and shared with u, works great ;) for the following guide i…
Print approx. €3.69–€4.52 excl. taxPreliminary estimate for PETGSource material: PET
3D printed threads are unreliable, so I decided it's better to rely on an actual M5 screw and nut for the otherwise amazing camera mount designed by Sneaks. Some comments Thumb screw Since there are a few variations for the M5 socket head…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 9.4mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Most of the rear main seal presses I've found require you to hit the press with a hammer or mallet to tap the seal in. While this does work, it's easy to get the seal crooked or in a little too far. So, I decided to take a different…
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
EN: This compact housing is designed for an LD2450 radar sensor with Bluetooth antenna and an ESP8266 Wemos D1 Mini V4. It is based on F-Square's multi sensor design , but is a new development except for the rear ball joint . The radar…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET
The Dremel 220-01 Mini Portable Drill Press is a fantastic foundation for a heat set insert press, as several other users have already made adapters for them: https://www.printables.com/model/13137-heat-set-insert-press-dremel-adapter…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple tool for making your own sealed sandwiches commonly known as Uncrustables. Print instructions Operating Instructions Take your bread, add your filling in a small dollop in the center and add other piece of bread. be sure…
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to PitterPatterPete for the great idea to give the Red-Eyed Crocodile Skink eyes! I only added pupil to the eyeballs and printed them with the MMU. Of course, this also works without MMU. If you want to print the gcode directly,…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
This is a new design of the venturi nozzle V04. If you tested the older version too, please tell me which is best. With this print you can upgrade your normal compressed air gun to a gun with a venturi nozzle. This design is for a…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for PETGSource material: PET
This pressurizer is designed to keep your padel balls under pressure after play. By preventing air from escaping the balls, they remain bouncier and better suited for consistent performance. This helps extend the lifetime of your balls…
Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Original data from: Burger Patty Press 110 mm by Donotseemyself https://www.thingiverse.com/thing:2941731
Print approx. €10.35–€12.65 excl. taxPreliminary estimate for one variant
Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
We often buy other brands of Nespresso capsules, such as the Jacobs or Omnia capsule in the picture. These are often not packaged in the same way as the original. Thanks to the designer of the original model because it works great, I just…
Print approx. €6.96–€8.51 excl. taxPreliminary estimate for PETGSource material: PET
Update 11/09/24: Added lever for TS100/101 and PINECIL iron mounts. A simple lever that can be screwed onto the soldering iron mounts. The lever model with “TS” in its name fits the TS100/101 and PINECIL mounts of the press. These are the…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
Wall bracket for spray nozzles of an EAWONGEE 4000 pressure washer gun Printed in PETG MK4 IS 0.2 Filling 15%
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET
Just a remix of a hexagon presta valve cap and a money statue, fits perfectly and snug, doesn't move around. pretty strong threads
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
A quick and easy tool to remove the valve core on your Presta bike valve Uses a very low amount of filament Print settings don't really matter as tool doesn't require much force to remove the valve core, but i prefer to iron the top for a…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for PETGSource material: PET
Hello everyone, what would be better than gifting your presents to your loved ones in a box that you have printed with your loved printer? ;-) There are 2 tops and 2 boxes to choose from: 1 easy to print/beautiful surface top where the…
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
This is a simple funnel that makes filling coffee beans into the 1ZPresso JX-Pro grinder faster and less annoying. As it comes stock it's relatively easy to both spill beans over the side as well as having them sit in the adjustment…
Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant
Fits snuggly over one of the vertical leg posts of the Alesis Nitro Mesh drumkit. Can hold light books or sheet music up to 15 mm thick. Diamond cut-out saves a bit of print time and material, but I've also included a solid version of the…
Print approx. €13.73–€16.78 excl. taxPreliminary estimate for one variant
A compact Aeropress organiser station. Designed to carry all coffee kit in a campervan cupboard but suitable for any cupboard! The base holds all equipment for storage, but also holds the Aeropress stable to prevent accidental spillage…
Print approx. €7.77–€9.50 excl. taxPreliminary estimate for one variant
Same as Heat Insert Press by BAGooN but modified to use MGN12H linear rail. This is a compact heat insert press that utilizes a 150mm linear rail with MGN12H block that is avalable on amazon. Follow BAGooN's instuctions as the only…
Print approx. €10.68–€13.06 excl. taxPreliminary estimate for PETGSource material: PET
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Model inspired by metal tools. I was too cheap to buy a tool that I use only once every three years. The printed plastic version is not as durable. The first version broke while pushing out the second bearing but did the job. This version…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
I designed this calibrated espresso tamper to deliver precisely 30lbs of pressure when the handle cap is completely compressed along the hexagonal running shaft of the base, though the pressure you achieve will vary depending on which…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Simple replacements for the plugs that hold the bolts in place on the safety baby/pet gate. Includes top and bottom pieces. Easy print.
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
To replace the Ikea Pressa clothespin who's breaking all the time . My model have a print in place pivot point for a better life span. Print instructions Print in one part and press ( until you hear a clic) it before use. Install the…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
Second Version I was trying to use the David D version of this print to stop by chickens from perching in an area. Those crafty girls decided they could “fix” it for me and was in pieces the next day. This bracket is a bit more rigid,…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for one variant
This knob is designed to fit my 25-year-old 20-ton bottle jack for my press. The dimensions are different from the Harbor Freight bottle jack knobs, so I had to design my own knob. The shaft diameter is 0.35 inches The pin diameter is…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Brew Unit Motor Gear For Jura Impressa S95/S90
Print approx. €3.54–€4.33 excl. taxPreliminary estimate for one variant
Just push it in, you don't need to glue it in.
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
I had no 20mm wood so i printed a dowel for the espresso kock box of "thenickdude" I used 20,1mm diameter, so it fits nice and tight. https://www.printables.com/de/model/143758-espresso-knock-box-20mm-dowel printing cost around 1€
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for one variant
Works really great to aim the tweeters at the users ear level. Beware: Takes a little shuffling to fit onto the build plate, but it does fit in to the standard Prusa i3 MK3/s build volume.
Print approx. €17.90–€21.88 excl. taxPreliminary estimate for one variant
Printed in PET-G. done mostly at 0.3 layer height with 70% (or better) infill for strength. Supports needed for the outside box, sieve and press (organics work well). Assembly is as shown in the photos. Take care putting in the 4 pegs…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
shifter plate for aliexpress shifter
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for one variant
Print with brim. I used PETG and 15 percent infill 2 perimeters. Worked fine.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Just because it has Go in the name doesn't mean you can't use it at home! This is a remix of @gmarsh23's excellent AeroPress Organizer Station. It fits on a Prusa Mini because I ditched the handles and made things a bit more compact.…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
No special print requirements, use any crystal clear PLA filament for the LED diffuser part. Designed for “long” LED types, for example OSW5DK6E61A. 3mf and gcode files are created in Ultimaker Cura.
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I needed a solution to the wands for my pressure washer, so I designed them. The clips contain a countersunk hole for a screw, so a hole needs to be drilled into the pressure washer handle for each part. I used spare automotive interior…
Print approx. €2.10–€2.56 excl. taxPreliminary estimate for one variant
Created for the Business Card Holder Flash Contest . This not only holds your business cards, but it encrypts and compresses them for safe, efficient, storage as well! If your business cards are ever seized by an attacker their personal…
Print approx. €17.35–€21.21 excl. taxPreliminary estimate for PETGSource material: PET
It's spring ! Time to sprout plants for your garden ! This small press allows you make compostable pots out of cardboard in which you can sprout your seeds. Once enough grown, simply plant the whole thing in your garden. No more plastic,…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
You can insert the usual gift cards or other cards in check format into the side of the presenter. Insert the presenter obliquely into the stand. Material change has been stored in the g-code
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Prints without supports, snap fit.
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
the dispenser itself holds 7 cups with the short extension it holds 10. A dispenser with 2 normal extensions it can hold 20 cups. But you can shuffle it deepening on your needs 2 different cups can also be put in the same "lane" so you…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET
Created using Fusion 360
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
A simple and very helpful print to store your capsules where you need them! The print holds 24 capsules while resting against your coffee machine. Designed for the Essenza Mini from Krups. In the bottom is a cutout for the screws of the…
Print approx. €9.96–€12.18 excl. taxPreliminary estimate for one variant
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Rotated the outlet about 15° to clear the sixth mounting position for putting in screw from top. Also embedded M3 nuts into the lower (no support needed). Mounting with M3x12mm or longer. I uploaded a print file for Mk4S with three…
Print approx. €6.76–€8.27 excl. taxPreliminary estimate for PETGSource material: PET
Hello everyone! This is the first ever model I've made. I didn't see enough Animal Crossing love here so thought I would make something from there. This prints wonderfully on its back and needs no supports. It also takes a 3 x 2 mm magnet…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is an adapter to enable an owner of a 2017 BRZ/FRS/86 sports car to be able to pressure bleed their brake system from the master cylinder. There are several pressure bleeder bottle kits available, or just use an air compressor with…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
The ring end of my Key-Bak didn't fit in the Arm-X1 part. Remixed to solve the problem.
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET
Print in whatever you like (I prefer transparent materials for this). You'll have to provide a 1.5mm thick piece of wire and press it through the holes to give the foot holder something to hold onto.
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
replacement for compressor fan Scheppach HC24
Print approx. €4.83–€5.90 excl. taxPreliminary estimate for one variant
This funnel is made to clip onto the small coffee funnel within the Bialetti (see pictures).
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for PETGSource material: PET
Another Portable Drill Press, designed around the makita drill XPH07Z . It can be used with a vacuum pump to hold the position, even horizontally. The base can be used to drill round stock with its vee-groove. Makita small router base…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Cette boite est assemblé avec de la colle CYANOACRYLATE D'ÉTHYLE qui colle superbement bien, utiliser un cure-dent pour les petits supports et attention à vos doigts.
Print approx. €6.89–€8.42 excl. taxPreliminary estimate for PETGSource material: PET
This could be a very useful and fun tool for teaching or for learning Chemistry. You can print as much pieces as you need to build your molecules. I would appreciate a lot if you could support me giving a like and downloading, thank you…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
