Counting matching models…
I bought e-bike conversion kit and it comes with sensors for the brake levers to shut off motor when braking. Usually you stick the sensor and the magnet to the levers and you are good to go. Not in my case. The magnet travel was minimal…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
The FLISAT box is good for both storage and learning to walk, but as the wheels roll too fast it's dangerous to leave alone with a toddler leaning on it. With these brakes you can adjust the braking power and let the wheels roll as much…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Mounting plate for Bafang hydraulic brake sensor modules to Shimano Deore brakes. Screws onto the handlebar mounting bolt so maintains its position better than cable ties alone to the irregular shaped brake reservoir/cylinder body. Use a…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
Use the pad spacer with your brakes brand on it. THERE IS A DIFFERENCE! If there is nothing with your brakes brand on it use uni version. And if you have 2020+ downhill E-bike with Shimano brakes use Shimano E version. And for SRAM HS2…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Coaster set with brake caliper and disc aesthetics. The kit consists of 4 coaster discs and a holder shaped like a calip
Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…
Like options? This set of files has a lot of them! The matching looks makes them look great. The ability to pick the exact size for your needs makes them work great! The sizes 1, 2, 3, 4 relate to number of M-LOK slots that the cover or…
This is a replica of the large bleed block that comes in the SRAM bleed kits. It is intended to be used with SRAM Code RSC and SRAM Code R brakes. DB8 compatibility: As reported by @Radek, this bleed block can also be used with SRAM DB8…
A M5 bleeding funnel for Shimano hydraulic brakes. Allows you to remove the air from the braking system. I tested it with SHIMANO BR-MT420 brakes. Another tool for bleeding breaks you can find in my models. If you like the model please…
More of the Zen Garden Collection https://www.printables.com/@TripleGWorkshop/collections/764364
This gondola has is designed for wings which can carry at least 2 Kg. The CG can be changed by shifting the wing rod. Aditional hardware needed: 2 servo's (regular size) for steering (min. 15Kg torque); 2 servo's (regular size) for…
Support to hold e bike braking sensor on shimano MT200 brakes, left and right, no glue needed, it is held using the same fixing screw of the brakes, see photos. (but if you want to be more sure that it does not come off, you can use glue,…
handles are 170 mm long. pegs are 4mm with a spacing of 6 mm apart
Useful for pressurizing the fluid reservoir, makes bleeding or a complete brake fluid flush a breeze. Main threads should fit most European brands (at least the internet thinks so) but I have tried it successfully with several Volvo's of…
This is a 1:16 model for 45 mm track of a standard German 600 mm, 1 cbm Muldenkipper without brakes according to DIN5963. Axles: standard LGB axles running in MR63ZZ bearings (3.0x6.5x2.5 mm) The bearing holders are fixed to the frame…
Handles need supports to print
This is a full box organizer for the Essential Edition of the Marrakesh Board Game including the Deluxe Component Upgrade Pack (the box would fit for a game without the Deluxe Components EXCEPT for the city doors (you would probably have…
rail scales are expensive so adding these on here. i will revise at some point to make new ones for myself. please give me a like if you download any, thanks!
About A small toy diesel locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All parts…
About A small toy shunting locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All parts…
Once you squeeze the lever withou the disc, the both cylinder of the hydraulic brake caliper will be closed. You'll need 2 of this tool. steps: 1. slightly loost the screw of the hand shifter's oil tank 2. insert 2 of this tools from both…
Do you like print like in a race? Then you will need a good brake (just joking). How to print it? - Can be printed with 0.4mm or 0.25mm nozzle, I recommend to use the 0.25mm in order to increase the quality of the letters on the brake…
Marrakesh Board Game Organizer This organizer is designed to store the following versions: Marrakesh: Essential Edition – English edition (2023) Marrakesh: Camels & Nomads – EN/FR/DE edition (2023) Since it is not possible to store all…
Hi fellows, i didn't had a wrench with 7mm. So i designed one to use it during bleeding the hydraulic brakes (shimano). To open and close it with power i used pliers. During bleeding it is sufficient to use that wrench printed in PLA.
Caliper cover for SRAM Code brakes. Easy installation, and you can still use the safety retaining ring. Optimized design for better printing and functionality. Its main function is to keep mud and contaminants away from the braking…
Just my design for adding brakes to a WPL D12 and including 12mm hex adaptors at the same time. Added a V2 version of the front caliper mount. Gives better clearance from the hex mount as some wheels are thicker than others. Print…
About A small toy crocodile locomotive with opening doors and roof, and real working brakes. This locomotive fits popular brick figures. All elements are very easy to print even for begginers (do not require the use of supports). All…
2019_05_31 New improved and thicker version. I'm using it for a week or so and till now it works fine. File contains right version only, if you need left, just mirror it. 2019_05_20 After 2-day enduro race The adapter broke again. It…
When you're overhauling your ATE 60 calipers you come across a big problem while trying to mount the dust seal - it's impossible without a special tool. I got it from VW and measured it and designed 2 versions of it. One like the original…
Instead of gluing the magnet onto the end of my Shimano XT's brake adjustment knob, I came up with this design to conveniently hold the magnet at the proper distance from the cutoff sensor. Printed with Polylite PETG, 0.2mm resolution and…
I stretched the upper part and merged them. The inner supports are well detachable. Any non-perfect bridgings are not visible… because they are on the backside ;-). Alltogether the model is much easier to print and without assembling.
These are for a Fyling Zoo HOn30 18 ton Climax. Category: Hobby
Adapter inspired by Brembo brakes. Layer: 0.2 Speed: 30 Infill: 10%
A mount bracket for Xiaomi Cybergear motor useful for experimenting with the drive.
Caliper cover for SRAM Code brakes. Easy installation, you can still use the safety retaining ring. Optimized design for better printing and functionality. Its main function is to keep mud and contaminants away from the braking surface,…
So I saw another model (https://www.printables.com/model/634964-kit-jardin-zen) and it inspired me for a simpler print with no overhangs and bridges so I redesigned it from scratch. And then I couldn't resist making place to accommodate…
Used a M5x0.8 allen bolt and nut. Print with supports for the underside of the hexagon on the nut. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 20 Filament: Creality PETG Black…
Spacer for two-piston bicycle brakes. Prevents the brake discs from coming together when you remove the wheels to transport the bike. When not in use, you can wear it on your key ring using the side hole. Printing time approx. 20 min. No…
Rudder Pedals and Toe Brakes for Flight Sims. Added 2 tubes for brake levers and used rubber-band to keep the tension. Changes will be made on wiring.
This is a part to place on the brake. It allow you to put in place the sensors to make sure de magnet is aligned to it. Once printed you have to cut the part which is going arround the cable to make it trought. Also i've already make…
However, when servicing your hydraulic brakes, it's very common that a single piston is stuck or coming our easier than the remaining ones. This causes a "spongy" braking feeling and wears pads out unevenly. To solve that problem, you…
Dust cover replacement for Shimano cantilever brakes Those are made for the Shimano Deore BR-MT60 but can work with other brakes from that era.
Follow the instruction from the original model. Replace the following ones: If you have a printer with a small printing bed: jardin_tour -> jardin01 + jardin02 If you don't own the deluxe components (here town gates) Support_Portes_Deluxe…
I’m excited to share my design for an insert/organizer for the Deluxe Edition of Marrakesh , including the metal coins, both expansions, the glass gemstones for the 2. expansion and the queenies 1 + 2 . (The Standard Edition should need…
Printed with Extrudr TPU Semisoft. 15% gyroid infill, 3 walls and 4 top and bottom shell layers. You can reduce the wall layers if you want to make it more stretchy. NOTE: it is designed for freeride skies so you maybe have to make a bit…
If your SRAM brakes are no longer braking properly and bleeding them is not helping, this is the tool you need. With this tool massage, you can move each piston independently. First clean it, then move each piston back on forth 5 or 6…
RZR Brakes hose a-arm mount Fitting good on RZR XP4 front a-arm 2017
I designed this prat for my Sram GX trigger and Magura MT5 brake lever, it may will work with other Magura brakes witch has the same clamp as the MT5 and I assume the Sram NX trigger is the same design so it may will work with that too.…
Magnet holder for Shimano brakes. Can be used for magnetic switches on an e-bike to switch off the motor when braking.
This is Stefan Feld’s Marrakech organizer. Compatible with Classic and Deluxe. Extensions are not included. If you need an organizer with extensions, you can check the design at the link below. https://cults3d.com/:1874737 Please print…
Markers for the boardgame Sky Team. The original markers for the engines and brakes were so short and smooth that they always slipped out of my fingers, so I replaced them with these markers, which are slightly longer, have a wider head,…
To complete, you will need a tube (preferably aluminum) with an outer diameter of 10 mm. Glue may be needed for attachment. Recommended material PETG. For greater strength of rake parts, use 4 outer perimeters. Recommended infill gyroid…
This project allows you to install front brakes on your 1/10 RWD RC drift car. These allow the car to stop much shorter than rear brakes alone, and everyone who has tried the car agrees that it is cool and fun being able to lock up all…
This is a Desktop Zen Garden that I designed in TinkerCAD. I have included 2 rake designs and 5 rocks. Scaling the elements gives you different pieces for your garden.
A simply tray for seperating all the keshi.
It's a simple TPU Print. This print attaches from the bottom of the Motor Arms by spreading the corresponding Blade Brake, and pushing up. The front unit will have a noticeable taper and bigger vertical taper faces the rear. The rear is…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
Awesome design, but I didn't get a good thread engagement with the tick gasket I was using, so I increased 2mm on the height. Use nylon filament, since even ABS/ASA will be “eat” by the brake fluid. No, I do not share the design files.…
A fun gameday medallion with the Jets' current team motto. I printed mine on an Elegoo Mars 3, but it should be FDM printable as well. I painted them after they were done. The chain is a cheap costume chain from Amazon. There are three…
Nathan drakes (formerly sir Francis drakes ring)
This is a set of brakes designed to fit into a 4mm scale etched bogie. It fits those designed by Bill Bedford and sold through Eileen's Emporium. They really require to be printed on a DLP printer in resin as an FDM printer won't have the…
I wanted to tidy up my mountain bike cockpit. Unfortunately, the Magura adapters available for purchase aren't ergonomic for me. So I designed adapters with different angles.Depending on the angle of the brakes, you can choose an adapter…
TAXI is the first car from “BRAKES Toy Cars Series" - a collection of cars from my “BRAKES? No, thanks!” voxel arcade game - wishlist on Steam! BRAKES toy cars need Universal BRAKES wheels (downloaded separately). Wheels mount instruction…
Replacements for the brakes that hold the blind closed for BlocBlinds Blocout blinds. One of the original “brakes” broke on my blinds (see second photo). They are an odd shape and a challenge to reproduce. BlocBlinds charges £10 + £3.95…
A replacement piece for the cube tower that causes the tower to more often retain cubes, creating more random outputs.
Included in your SRAM hydraulic brakes is a small T8 Torx tool, meant to install the new barb after shortening the hose. This is a handle for that tool to snap into. If IKEA can give you an ergonomic cheap plastic cover for a janky hex…
Simple goldfish sleeve designed for covering sharp edges on wheelchair brake handles (Wolturnus W5) Project Background One of my customers wanted to convert his old wheelchair so he could go fishing . We worked well together and had a lot…
Support for ebike or regular bike to attach multiple lights and/or sound horn to fork with one hole. Multiple positions to adapt for different light types. RST fork mount hole is not durable. For heavy light reinforced support what use…
Very light cable tie to organise cables on Shimano mountain bike brakes. Printed in 0.2 with PCTG Note there is an updated better version. now: https://www.printables.com/model/1171845-brake-cable-holder-for-shimano-brakes-v2
Small clip to attach an extra cable along your brake hoses. Prints in 0.1 or 0.2 without support.
AMBULANCE is the first car from “BRAKES Toy Cars Series" - a collection of cars from my “BRAKES? No, thanks!” voxel arcade game ( wishlist on Steam! ) BRAKES toy cars need Universal BRAKES wheels (downloaded separately). Wheels mount…
This is a replacement quick release/barrel adjuster for french vintage CLB Brakes You will need a M6 brass insert and an M6 barrel adjuster bolt
Adds disc brakes to the soap box car. Take a look at the fusion360 files for details. Use standard bicycle cable brake wires. 12 1/2 inch wheels are used, you can find them at your favourite china shop. For the seat, i used a sliding…
Universal wheels for my “BRAKES Toy Cars Series”. 2 sizes available - normal and wide. How to mount wheels to the car: Fit: Test-fit the 3D-printed wheels onto the car body. Cut: Cut a piece of filament to match the axle width, leaving a…
This tool is used to install the rear brake boot seal on E39s. This has been tested on a facelift E39 540i with the Better Brake Parts rebuild kit (41491K). Printed in PLA with 60% infill. You can definitely do less infill for faster…
JET disk sander BRAKES After the original disk sander brakes "broke!" I designed this as a replacement. the design of the brakes is even stronger and more rigid as the original part, believe it or not, as it's thicker than the original.
Brakes for your office chair to put under the wheels so you don't slide away whilst sim racing. Glue some kind of rubber mat on the underside of the print so it grips the floor better. You want to print at least to of these for the chair…
I have since realised that it looks an awful lot like the common Shimano ones. Anyways, worked great for me.
Mudguard for my kids 26" MTB with v brakes. I could fit it on the front and back.
Cute little piggy sleeve designed for covering wheelchair brake handles ( 4ma3ma TUK 24) Project Background One of my customers wanted to give her wheelchair a little farm-themed touch. When we came across these little pigs, we knew right…
Wessen Fahrrad mit hydraulischen Scheibenbremsen ausgerüstet ist, der sollte, wann immer ein Rad z.B. zum Wechsel des Reifens abgenommen wird, verhindern, daß versehentlich die Bremskolben herausfahren und so den Wiedereinbau erheblich…
Mandrakes! Don't pull them out, you might die or something! You know the drill; sized for tabletop use, scale them up or down as you wish. Will need supports, no base supplied. If you liked this model and want to show your thanks, you can…
I’m excited to share my design for an insert/organizer for the Deluxe Edition of Marrakesh , including the metal coins, both expansions, the glass gemstones for the 2. expansion and the queenies 1 + 2 . (The Standard Edition should need…
Brakes for your office chair to put under the wheels so you don't slide away whilst sim racing. Glue some kind of rubber mat on the underside of the print so it grips the floor better. You want to print at least to of these for the chair…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
Follow the instruction from the original model. Replace the following ones: If you have a printer with a small printing bed: jardin_tour -> jardin01 + jardin02 If you don't own the deluxe components (here town gates) Support_Portes_Deluxe…
Simple goldfish sleeve designed for covering sharp edges on wheelchair brake handles (Wolturnus W5) Project Background One of my customers wanted to convert his old wheelchair so he could go fishing . We worked well together and had a lot…
Universal wheels for my “BRAKES Toy Cars Series”. 2 sizes available - normal and wide. How to mount wheels to the car: Fit: Test-fit the 3D-printed wheels onto the car body. Cut: Cut a piece of filament to match the axle width, leaving a…
TAXI is the first car from “BRAKES Toy Cars Series" - a collection of cars from my “BRAKES? No, thanks!” voxel arcade game - wishlist on Steam! BRAKES toy cars need Universal BRAKES wheels (downloaded separately). Wheels mount instruction…
Wessen Fahrrad mit hydraulischen Scheibenbremsen ausgerüstet ist, der sollte, wann immer ein Rad z.B. zum Wechsel des Reifens abgenommen wird, verhindern, daß versehentlich die Bremskolben herausfahren und so den Wiedereinbau erheblich…
AMBULANCE is the first car from “BRAKES Toy Cars Series" - a collection of cars from my “BRAKES? No, thanks!” voxel arcade game ( wishlist on Steam! ) BRAKES toy cars need Universal BRAKES wheels (downloaded separately). Wheels mount…
Mostly 3D printed Rudder pedals with toe brakes, based on aluminium extrusions 2020 and 2040 https://youtu.be/JVjNerzXWkA
These are 3d printable rakes for a table top zen garden that I made. See this instructables page for the full build Japanese Zen Garden Table Made From Old Furniture : 12 Steps (with Pictures) - Instructables
![[WIP] Front Brakes for 1/10 RWD Drift RC](https://media.printables.com/media/prints/0412d516-689a-46bb-88f3-48bd1a2fea13/images/12267215_5fa0e332-4e6b-487e-ab08-c344f7caac10_ce63c887-b078-4644-b18c-261da21bf6c1/55090284683_39d87c26b1_4k.jpg)
![Cable tie for Shimano brakes[Check V2 instead]](https://media.printables.com/media/prints/1035471/images/7855101_b22fac51-28ac-43ef-a677-9091be055f0a_1092b4ce-1361-4ed1-bf1f-852826ca3762/screenshot-2024-10-10-at-184810.png)
