Counting matching models…
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
replique du ballon d'or football en 10 cm personnellement je l'ai print en 23
Print approx. €11.05–€13.51 excl. taxPreliminary estimate for one variant
Optional upgrade for your RepRack or RepBox storage systems. Add a flange rollers to your slip rod setup for enhanced rolling as needed. Print directly from your RepRack or use in a standalone configuration. Snap fits cleanly over slip…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Compliant mechanism clips and clamps for use or replacement in different projects. The clip will hold things like cables, pens, tools and many others you want to have attached. Changelog 2024-12-21 v1.6 fine tuned print settings for…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
This is my version of the classic Die Hard scene with Bruce Willis crawling through the ventilation with a lighter Christmas decoration. You can print a white fireplace with a lithophane of Bruce Willis in Die Hard crawling out of the…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for one variant
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Automatic Feeder (SureFeed MPF001) of family member couldn't open lid anymore, as a result their cat couldn't get to prescription kibble. Turned out only a small part was broken, quickly modeled and printed this fast and tiny replacement…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Esta es una réplica 3D de la estrella de mar que se volvió viral tras el stream en vivo del CONICET junto al Schmidt Ocean Institute , durante la expedición al Cañón de Mar del Plata , en el Mar Argentino. Apodada por internet como…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Spur N Bahnsteig einseitig und zweiseitig
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
You need for each arm 5 M4x14mm nuts. It is recommended to use supports on plate only.
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for PETGSource material: PET
Replacement part for Seat Ateca parcel shelf. Might fit other car models but didn't test that. Print the pins as shown in the picture (more strength). I used a 0.3 [mm] layer height (should only be functional) and PETG and it works like a…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Alternative top infill pattern: Archimedean Chords Low speed and high temperature will create a shiny top surface. There are "holes"…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
EN: The original plastic clip on the Tractive CAT Mini GPS tracker tends to break over time — this model is a direct replacement that snaps right onto your cat's collar just like the original. What's new in version 2: Reinforced mounting…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
A replacement head for the Einhell Trimmer GC-CT 18/24. It replaces the original single-blade-head with a multi-blade head. (The provided .stl files only have three blades, but you could go with more by editing the .scad file, or using…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Sadly my goto No1 / 3mm clipper cover for (Wahl trimmers) has broken and there is no replacement available without buying a full set This was made to be an absolute pattern fit and size to the original. If printing from STL you should…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
If you already used my Label-Covers or Drawer Inserts for the Allit Basic 33 / Allit VarioPlus Hobby 33 drawer inserts (Also sold by Aldi Workzone “Kleinteilemagazin” or Lidl Parkside drawer), you may be interested in this one as well: I…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
This Thing is a Renault Modus trunk shelf clip. It's very hard to find this one in car parts shops, without this trunk shelf is very unstable and may fall while driving. Tried to find this clip on scrapyard with no luck. This clip may…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
3D Printed print bed scraper tools are great, they don't damage the print surface, are safer to use, and can be produced when needed! The drawbacks are that plastic blades are much less durable than metal ones, and printing a complete…
Print approx. €2.65–€3.24 excl. taxPreliminary estimate for one variant
The hook that holds the parcel tray broke and the parcel tray could no longer be raised. So I designed a fast and cheap solution. You only need to print ed place the 2 pieces. For a better fixing you could put some glue . DON'T PRINT IN…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE LIGHTNING CABLE REPAIR Print two identical shells to fix your lightning connector. Before assembling the parts, apply some glue to fill the inside of both pieces. Next, place your…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Whistle not included! There are two variants: Signal-Whistle-Replacement.stl Version with cutout for a 42mm x 4.5mm (diameter) ferrocerium rod. Signal-Whistle-Replacement-Simple.stl Non-functional spacer part, just to keep the space…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Print approx. €4.36–€5.32 excl. taxPreliminary estimate for one variant
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
This could be a very useful and fun tool for teaching or for learning Chemistry. You can print as much pieces as you need to build your molecules. I would appreciate a lot if you could support me giving a like and downloading, thank you…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is a small visualization for the axis cross of FreeCAD - you can use it to understand directions in FreeCAD. Per convention the FreeCAD axes are displayed in RGB: X axis - red Y axis - green Z axis - blue I would recommend printing…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is a modular ratchet socket holder. It consists of a base, 9 springs that hold the ratchet sockets and a locking pin. If a spring breaks you can replace it individually without having to print another holder. The ratchet sockets…
Print approx. €0.72–€0.89 excl. taxPreliminary estimate for PETGSource material: PET
I designed these for my mom after she lost one of her original ones. I used a ballistic chronograph to compare to the originals and was unable to see any difference in performance. Printing notes: The casing is printed in PETG, and the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Pouring resin and/or IPA back into the bottles is a clumsy mess (for me at least). These funnels screw onto the bottle and have a replaceable filter, making for a more stable target to pour into. Warning: If you change the parameters…
Print approx. €4.39–€5.36 excl. taxPreliminary estimate for PETGSource material: PET
These are building blocks to replace any missing blocks (or to recreate the entire set!) from the Grimm's Stepped Pyramid Puzzle Block set. I bought a used “stepped pyramid” set that we found at our local thrift store that was missing one…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Replacement for Reef boardgame mini expansion, in case you lose one fish. https://boardgamegeek.com/boardgame/253274/reef-kings-coral Print instructions Category: Toy & Game Accessories Summary Replacement for Reef boardgame mini…
Print approx. €2.30–€2.82 excl. taxPreliminary estimate for one variant
The Bento Box was originally developed as a tool tray/storage device for the Repbox TT/FFC cabinet ( https://www.repkord.com/collections/repbox-2/products/new-repbox-turntable-filament-filing-cabinet-v2 ), but we've found them very handy…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
This was a quick replacement for the original hitching rail, which was broken and made from a material that could not be glued back together. I recommend printing it upright to get a nice round rail. I used PLA from Das Filament in…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
Iphone 17 Pro Replica sized as the original
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
Replacement top cover for Kenwood Chef Major Classic. Beware: The tabs are fragile
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for one variant
Design is at the end of video
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
There are three versions 2x3 cm 3x3 cm 3x5 cm the photos are currently with red filament because the white is still being delivered
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
This model is a replacement for the reverse/brake side of the trigger on the FlySky Noble NB4/NB4+ radio. I accidentally broke the Medium size, and then the Small size broke on me unexpectedly. There is definitely a weak spot in the…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
I designed this to hold a good lens from an old magnifier. I tried several methods of holding the glass and ended up with simple (but not very elegant). There is a small cut in the circle to allow you to work in the glass - then glue it…
Print approx. €1.97–€2.41 excl. taxPreliminary estimate for one variant
My library needed a way to use third party filament spools so I remixed and combined the adjustable filament spool holder HERE (https://www.thingiverse.com/thing:4951629) with the spool holder adapter HERE…
Print approx. €11.92–€14.57 excl. taxPreliminary estimate for one variant
My Dolce Gusto (Nescafe) was missing a leg. I had to design a quick replacement part for it. It's something super simple that solved a real problem in my kitchen. Print instructions Material: PLA (I used PolyTerra Saphire Blue) Infill:…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Print in vase mode. Use a solder iron to make small holes to mount.
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
A leg of my Crate and Barrel couch had shattered so I modeled a replacement. Might work for you as well. Print instructions Print with a pretty tight infill (did 20% 3D Hexagon) because a lot of weight will be put on it. Used PLA and…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
I found this useful model on the Internet. If you are one of the few people in the world that still has a TI-99/4A Peripheral Expansion Box (early version), this file may come in handy some day. *** This is NOT my original design, I'm…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
These inserts are upgrades to the Bento Box platform. We're working on others to increase the system's functionality. These files work well with PETG and must be printed in Vase Mode… preferable with a .8 nozzle and extrusion with of…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
I needed a quick replacement for a Pfaff Variomatic 6085 til the new aluminium one arrived. Fits perfect.
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
This model is from the phantom menace and is the light frigate seen in the beginning. The ship can be printed either in parts or in one complete model for those who desire their model to be bigger or smaller.
Print approx. €9.56–€11.68 excl. taxPreliminary estimate for PETGSource material: PET
One of the corners of my mother's SuperFrame quilting frame corners has been broken for 10+ years, and it had been ridiculously expensive and nigh on impossible to find replacements for it due the brand no longer being in production (as…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
The Republican Party , also referred to as the GOP (" Grand Old Party "),was founded in the northern states in 1854 by forces opposed to the expansion of slavery , ex- Whigs and ex- Free Soilers . Abraham Lincoln , 16th President of the…
Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant
Este tipo de engrane karcher no lo vende suelto, ademas tienes que comprar la rueda completa y vale bastante dinero. El engrane va en la rueda y mueve el cepillo. Lo he impreso en PETG, y de momento esta resistendo el desgaste bastante…
Print approx. €2.66–€3.25 excl. taxPreliminary estimate for PETGSource material: PET
I just added threads and a little bit of an inset for the bolt in the top and a bump on the side of the bit holder that keeps the bit from sliding off so easily.
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Mount these to your wall for a place to keep your sponges. Long live physical media!
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for PETGSource material: PET
This is a print-in-place replacement wheel for an old series metal Canadian Magen David Adom donation box. Required hardware One M3x20 socket head screw per wheel Printing instructions Print the .stl file as-oriented (outside part of the…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant
This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This is a quick fix - I do hate sticky tape repairs. So I did a 3D scan of the remote open, drawe some lines in freecad, printed and it works for me. It is not very fancy it just works, see improvements list. I printed it with 0,4 nozzle…
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
I dropped my kit, and the revolving bit carrier part broke it's pivot on the top side. Modeled it and print turned out excellent.
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for PETGSource material: PET
As the Xmas nears all the Time things go missing or Broken so i decided to start to repair EVEN translucent Glass like things as here the LED-Defusor of a Christmas Star Top so it looks great as from 1m as you normally look at your tree…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Replacement plastic part from Rog Strix Fusion 300 headset Print with supports, 100% infill, brim 6mm, 4 perimeters.
Print approx. €1.22–€1.50 excl. taxPreliminary estimate for PETGSource material: PET
The main problem with finding a replacement was that the holes in the wall are 20 mm apart and I didn't want to drill more holes. Since I couldn't find a suitable holder in the DIY store, I simply modeled a replica of the old holder. The…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for PETGSource material: PET
Replacement handle for Sterilite Stack & Carry handle box organizer.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
A print-in-place Viewmaster lid that replaces your old one. Here's the single one-print piece: https://www.printables.com/model/303021-willy-wonka-everlasting-gobstopper If you found this useful, it would bring me great joy to see your…
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for one variant
This is a small replacement gear featuring a 10-tooth rounded cycloidal (flower-style) profile , recreated from the original part using caliper measurements and reference photos. Specifications 10 rounded (cycloidal) lobes Outside…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
The clip will now hold the phone tight and it will not fall out. Increased griping strength. Well I guess I am a little OCD. The D ver of this really fits nice and snug, so I am now happy. Also if you have an MK4S with HP nozzle I…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, with art of a book and torch, reading "Read Write Repeat: Keep Knowledge alive" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames ,…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
Simple replacement latch for an ArtBin model number 83805. PETG is suggested for a mixture of strength and flexibility. Support everywhere is required, but easy to remove.
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Description Replacement snap clips designed to repair broken locking tabs on the Loxone NFC Code Touch. A common failure point of this device is the small plastic snap clips, which can break during disassembly or installation. When this…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
replacement button for hardhead childgate
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
Internal shaft for Probata thermostat. The plastic parts of these thermostats gets very brittle over time. Making new shafts connecting the potmeter to the adjuster wheel extend the life of these units. This print alone has saved me close…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Replacement piece to plastic mounting plates above earphones.
Print approx. €0.76–€0.92 excl. taxPreliminary estimate for one variant
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
This is 3D printable model of the Intrepid Class NCC-74656 Voyager from the Star Trek. The model has the variable geometry pylons so it can be displayed with the pylons down or up like in a warp. It is a kit so no glue needed. The…
This is an upgrade for users of MMU and who has (un)original drybox (also works with the Slim version). This system replaces the filament buffers. It's a project in development that I try to improve with the time, thanks for your…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
The bracket of my HyperX Cloud 2 headset broke, so I modeled and printed a new one.
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
Needed a replacement nut for our lampshade, so I made one. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG Signal White
🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…
A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
RepRack Stabilizing End Caps These end caps help stabilize side-to-side movement of your spool storage when not using Rod Clamps. These end caps provide a nice finished look to your RepRacks. Designed to fit snug on your ½" EMT Conduit.…
These are not go over guards and replace the stock removable cage! (See Pics) They are tested in my own reef tank! They provide a cleaner look then a go over guard and the added safety of one! No more daily cleaning of quick to clog foam…
This is my design of the Replicator Drone from the Stargate SG1. it is posable - all four legs are fully movable, and it has posable wings. The model is designed with one single goal in mind - absolutely no glue. And in this, I succeded…
After one season of successfully using my printed hydroponic tower, I disassembled it to clean and overwinter the parts. By that I realized, that the construction around the filtration mesh holder won't be usable another season as it has…
No Supports - Print-in-place pin+ring moves and has a nice feel. Model: Russian TM-46 anti-tank blast mine .
========================================================== UPDATE: I have released an improved version v3 which can be found here ========================================================== I saw the model from xoid but the zipper I needed…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
The Ender 3 S1 has been a great machine so far except for the loud hotend fan. I had a spare 4020 blower fan so I designed this bracket to replace the one found on the sprite extruder. Even at 100% I've found it to be quieter than stock,…
Made for the Replacement Parts contest. The core model is a functional replacement for Presta and Shrader type dust caps as round on most cars and bicycles. After printing check internally for any hanging plastic which could depress the…
Thanks Eric for the file, This was extremly difficult to break down and seperate. It was completely full of mesh errors. The split file was / is the best thus far and as an untested print I can't gurantee it will all line up with out…
Had some trouble with the original model printing the helmet visor weird since the external visor is so thin and the model has an internal visor preventing infill from getting to the front of the helmet. Corrected it in blender by…
I designed this Colt 1911 replica that is roughly the correct size if you like this please give it a like! EDIT_1: VERSION 22 is much better! it has thicker scales, and other small improvements. This prints well with if you turn it so it…
This is my first design since getting into 3d printing. With a small child at home and friends not familiar with 3D printers, I wanted to warn people of burn risks with the printer while keeping thigs fun and attractive. Since I look at…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
Not sure about the exact model. This fits perfectly in mine. Check the dimensions. Original is available and modifiable on OnShape at…
my original clamps started to break after changing the head cushion. So tried my luck with one from printables the original was pretty good only a bit to loose and I had trouble getting the cable behind the aluminium frame. I made the…
etsy.me/3n6BXUo bit.ly/42oqoYP There's a version available on my profile that has an integrated foregrip Replica Tec 9 Frame scale model by saxonite - Thingiverse Please leave like if you download this model, it goes a long way in…
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
![Colt 1911 Replica prop [IMPROVED AND UPDATED] (Designed from scratch)](https://media.printables.com/media/prints/682107/images/5359823_dcc53a32-e6f6-4a88-a468-582fdfd198ad_3ca5a631-9251-4d12-81fc-f5624b52233e/large_display_8123d645-d300-4929-945e-c84d2d032276.webp)
![#0118 [REPAIR] Dyson Wand Tube Latch <V7 V8 V10 V11 V15>](https://media.printables.com/media/prints/684679/images/5379109_2c2c8704-f14a-47c0-a640-2faee9f8204a_5ae8e719-2a4b-4ff5-a084-a3e50fdbeffe/rl-20231217-006.jpg)
