112 models
Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
BREEEAAATHE ... because the MARK III is here! 100% more filter area means 50% easier breathability. This will allow you to use different materials (follow links). Also there is now a seam between flexible and stiff part for perfect…
This is a wearable respirator that uses vacuum bag HEPA filters to protect from the spreading of viruses and bacteria. Have a look at the post printing section for more information. At 100% scale the mask is made for the average head…
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
DIY respirator without air vent. Bidirectional protection. Use fabric suitable to filter micro particles. Print instructions Print from PLA or you can experiment with flex filaments, layer height 200-300 um for fast prints. You need only…
This is a remix of the Bufallo e-NABLE Crisis Mask V1 optimized for filter sizes in Brazil. Works pretty well with the 1.5 mm wall thickness implemented in these models here. Five different sizes - XS, S, M, L XL The insert for the filter…
Created a remix of a normal respirator (by Budash) and added extra holes to connect pipes/tubes and straps for steampunk gas mask. This was my first 3D print in flexible TPU (0.2mm resolution, 20% gyroid infill, 60 degree concentric…
This is a filter capsule that utilise surgical mask and able to use 1 standard Surgical mask up to 16 times. If you are able to cut the surgical mask equally into 16 circles (38mm diameter) you can place it inside this capsule which can…
Ikea Skadis (pegboard) hook for respirators/masks.
A simple bracket holder for my 3M Safety Paint Project Respirator mask. Uses 4G screws to attach to the back board. Print Settings Resolution: 0.15 Infill: 20% **Filament:** Filamentum PLA Blue Notes: s Category: Tool Holders & Boxes
FullyPrintedValve This valve was designed to be completely 3D printed, in the event that few other materials are available. Currently it requires aluminum tape or duct tape, both of which are available at hardware stores. The seal is…
Please give this a like if you find it useful or just like the Idea! This mask can be used for anything such as a remote ventilation unit or cosplay. Don't depend on it to save your life, it was something I did to learn the ins and outs…
Respirator dust mask etc. For the lack of protective gear I have designed this respirator. You can use cloth or the best antibacterial vacuum cleaner bags as a filter. The filter can be easily replaced. Print instructions material petg or…
Key points 1 Uses household tissues as the filter. 2 Large filter area. This reduces the flow rate per area and allows more layers (12 – 16) to be used, thus increasing filtration efficiency. 3 Comfortable because the only thing against…
side parts -Respirator - Breathing Mask With HEPA Filter
This mask, like many others, is designed as a fall-back to proper medical equipment in case of shortage. Features: Prints in less than 4 hours No supports needed Thin enough walls so that it can be cut with scissors and adjusted to fit…
I needed new filters for my 3M respirator but they have become pure unobtanium at this point so I made my own. I made these so that people could use their own filter media. I am not an expert in this and I do not have any recommendations…
I bought a 3M 6000 series full face respirator. It's great, but obviously not compatible with my spectacles. So I looked for the spectacle kit that I was sure would exist……
Respirator without exhalation valve. Print instructions Respirators should be printed using a TPE 90A fillament. Interface pattern spacing: 0.3 mm. Contact Z distance: 0.3 mm. Max print speed: 30 mm/s. Small perimeters, External…
wall mount for 3M half-mask respirator, attached to the wall with a countersunk screw. Category: Organization
This is respirator I use during the outbreak of Covid-19. It doesn't require additional montage, except for addition of a filter and straps. Shoe laces work quite well as straps and you can read more about suitable filter material down in…
This is a fairly close copy of the primary speech module of an Avon S10 respirator. It's intended for cosplay, display etc, for example making a replacement in UV-reactive, glow in the dark filament, or a different colour to match a…
Hey folks, I recently lost my female loop for my 3M respirator and did a remix of another one I found on here because it seemed easier than actually looking for it. Locks up acceptably well and holds on to the elastic better than the…
What is it? Replacement straps for 3M gas mask. Two pieces printed out of flexible filament. I used extrudr TPU medium flex filament. Why make it? Originals broke. Latest revision Designed with FreeCAD 0.19 BOM Strap side with pockets…
I really liked this design https://www.thingiverse.com/thing:3454725 ,and how he incorporated roomba HEPA filters into it instead of standard air cartridges as they are much cheaper. As a training exercise in 3d design, I designed my own…
This isn't a remix, more so a re-publish, but the author's original publishing was lacking the front grill piece. Luckily, there was a link to another site that contained the whole file as a .obj file. So I broke it up in Prusa Slicer and…
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
Today I saw how agsworkshop made a mod for the Montana Mask as the bane mask from the dark knight rises and loved the concept. Since I really Enjoy Jojos Bizarre Adveture (Specially Part 2) and i have already seen quite a few memes about…
Update Aug 17th 2025: Uploaded STL versions of the models. This is a powered respirator for woodworking or construction, or anything where a P3 / TH3P particulate type filter is appropriate. Powered by a Makita 18V battery, but…
This adapter is for an MSA Advantage 200 Respirator (#00817663, circa 2004 according to copyright on the unit) to accept 3M 6200 cartridge filters. Made another adapter by Revenantautumn for a friend that didn't quite fit right. So, back…
I printed it from PETG Prusament and fold box when print was still a little bit warm.
This is a prototype half face respirator with 3 NATO ports. It can be heat formed with a hair dryer to form a decent seal. The goal was to add a mold for using caulk/silicone to make a compliant seal but the project is shelved for now.…
This is a set of lens rims for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. They should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. Support…
Hey, this is a remix of a respirator that i found on here a month previous. The modification I made was a modular gas mask which is designed to fit and mesh with the screws modeled on the original design. If you can, give a like to the…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
I think its necessary that everybody in the world helps according to his possibilities and skills to defeat COVID-19! Therefore I also want to contribute and help people. With this respirator kit I want to support PRUSAs initiative…
Tactile image of a human respiratory system. Context Sciences, technology, engineering, and mathematics rely on illustrations and graphs to convey their knowledge. However, blind people are limited to texts (if literate in Braille). To…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
The filter is designed for respirators with exhalation valve to prevent its wearer to spread drop infection. Between two printed parts there is space for 2-4 layers of cotton or similar filtering material. The filter holder is tightly…
This design is for a 3M compatible respirator filter cartridge that can accept a variety of filter media. Since FDM prints are porous and must be filled and painted to be properly sealed, this design is based around a PVC clean-out plug…
This is a collar that attaches to MSA respirators in the same manner as MSA filter cartridges. It may be useful in adapting other types of filters onto these respirators. I'll be using it with the HEPA filter cartridges that belong to my…
First things first: THIS IS A PROTOTYPE. This model has not been tested to any safety standards. Please perform individual testing and validation on these parts before considering their use! Remember - these parts go next to your eyes! Do…
*** I’m no longer posting to Thingiverse, or Updates. If you wish to see all my work and updates to items posted to Thingiverse please visit my personal website https://gallaghersart.com/design ,OR Google “GallaghersArt 3D” (GallaghersArt…
DIY Respirator box with HEPA + Carbon filter and oxygen mask with corrugated hose for example. Box has variable dimension settings like OpenSCAD source file.…
I designed and printed this large surface area, clip-on, exhale filter holder for my 3M 6200 half face respirator. This allows me to use half a surgical mask to filter the air I breath out of the mask in order to protect others while I'm…
Early model of air vent for your diy respirator. Print instructions Print it with 150 um layer height. Use scissor to cut a circle from rubber tourniquet as vent membrane. You will find it in first aid kit (car´s FAK in EU). Fit it in the…
This is improved version of my previous design. I added drains for condense water inside and hole with plug for some sponge material for holding that condensate. I also added front cover so it will look not as suprised face :-D This is…
Print settings Add a support blocker to the top ⅔ of the model. The slice preview should look like the screenshot below:
Filter replacement for 3M respirator using surgical mask. The filter area is 50mm x 42mm, double the area of original rounded adapter to make breath easier. One surgical mask can be cut into 9 pieces for being used in this adapter. Print…
This gas mask bust presents a bold, industrial design with a focus on clean mechanical detailing and symmetry. The model features large circular lenses, dual filter canisters, and a structured respirator unit, all integrated into a…
This setup can be used with a cheap venturi system and Hepa filter in an ordinary hospital room AND in any standard ambulance and prevents exhaled particles from contaminating the room and the surroundings of the patient. No need to put…
Redesigned original mask. Made it a little slimmer (Original design looked like alligator or Darth Vader). Made it bigger in vertical direction for long face like mine. Made it possible for using with cotton makeup pads as a filter. Made…
I designed this to hang my respirator on to the wall when not in use. I didn't really see anything I liked when searching for one. Simple but effective Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No…
This mask, like many others, is designed as a fall-back to proper medical equipment in case of shortage. Features: Prints in less than 6 hours No supports needed Thin enough walls so that it can be cut with scissors and adjusted to fit…
Loose ends in respirators can be annoying. Apart from this they can be very dangerous when used with rotary or other power tools. This print allows to keep the ends fixed. Wider clips attach to the lower strap, narrower ones to the top…
M3 Respirator - Head harness Material: PETG (Don't use PLA, it need flexibility) Layer Height: Designed for 0.2mm layer height Fit: BambuLab X1C 256x256 bed.
Checkout my version-2 https://www.thingiverse.com/thing:4272953 I used COVID -19 MASK by lafactoria3D as base for improved respirator. Double intake for better breathing and more room inside. Category: Other
Yet another easy printable and usable cigar pipe style respirator. (Pocket Size. Ad hoc basis!!! ) HEPA filter mount STL and customizable scad here . (--- DISCLAIMER ---) Print and use it at your own risk. Uses up to 10mm thickness Ply…
In the eternal pursuit of improving my ANH Tusken Raider costume to ever more screen accurate levels, I have wanted to create a model of the respirator/breather. This is my current and best effort to date (IMHO). It is sized to fit into…
tisk cca 8 min PETG 0,3 per 3 MK3
I'd picked up an inexpensive full face respirator to replace my half face one. The only problem is that I need to wear reading glasses, and you can't really wear standard glasses with such a mask. Looking at what's generally available I…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … When I print with ABS or ASA the air in my little printing…
Remixed this to fit onto a 3M respirator. 4 iterations to get a nice snug fit
*** I’m no longer posting to Thingiverse, or Updates. If you wish to see all my work and updates to items posted to Thingiverse please visit my personal website https://gallaghersart.com/design ,OR Google “GallaghersArt 3D” (GallaghersArt…
This is a port cover for an S10 respirator, intended for cosplay/decorative/re-enactment/airsoft use. It should snap-fit easily, but it might take a little bit of force, depending on filament and printing methods. They fit slightly loose,…
Not much to say. Print, use a flat head wood screw to mount, and then slide your respirator on.
An experimental PAPR. Controled by breath, fully automatic All details here : https://www.b4x.com/android/forum/threads/experimental-powered-air-purifying-respirator.116659/ You will need this to adapt the mask to the turbine :…
This a clip designed to be used with a Miller LPR-100 half-mask respirator along with a 3M 9100XX Speedglas welding mask. Remove the plastic elastic harness and replace with this. It aligns with the vents in the welding hood to hold the…
Attribution https://www.thingiverse.com/thing:182044 https://www.thingiverse.com/thing:1487286 https://www.thingiverse.com/thing:1597847 Description Use at own risk. Materials and methods R&D in PLA Print in ABS/PET for better chemical…
This makes removing a speech module from an S10 easy. Use with a 1" spanner, adjustable wrench, or just your fingers. The module will then pop out when pushed from the rear. I found using a flat screwdriver at the edges effective. If you…
I have Shigematsu organic filter cartridge. I have 3M respirator. Ugh ! Shigematsu filter for 3M respirator with bayonet slot I have Shigematsu organic filter cartridge. I have 3M respirator. Ugh! Shigematsu filter for 3M respirator with…
*** I’m no longer posting to Thingiverse, or Updates. If you wish to see all my work and updates to items posted to Thingiverse please visit my personal website https://gallaghersart.com/design ,OR Google “GallaghersArt 3D” (GallaghersArt…
These will clip onto the exhale port on some of the most common reusable respirators (3m 6000 series and honeywell 5500 series) and allow you to use cotton rounds as filter media. Layer adhesion is fairly important for the function of…
Do you like this design and want to give a Tip for it? Do it here This Box is meant as a Transportbox for N95 / FFP2 or FFP3 Respirators. It was optimized for Valveless Moldex 2400 NR D Masks, since those seem to be the best affordable…
This is a clip-on cover for an Elipse P100 respirator to add outflow filtering using a piece of surgical mask. The GVS SPR457 is a valved respirator with no outflow filtering. This respirator protects its wearer from atmospheric and…
This is a coffe cup holder for the Dräger Perseus respirator. As everyone knows: the duty of any anaesthesiologist is to enlarge his coffee stains. When it is easier to do while making anaesthesia? ;-) (just kidding) We use this gimmick…
Hose management (diameter 18mm) & mask holder for respiratory assitance machine. Use one 03x10 screw for fixing the hook on top of the arm, and two 03x30 for fixing the essemble to the bed head. If you don't want to use screw you can also…
peter m’s face mask is so useable that I needed a box for carrying spare filters around in. There’s also a smaller compartment for a spare insert, adjusting clips, strap etc. The case and cap latch together, so it should be safe in a bag…
Exhalation filter designed to directly attach the exhalation port on the Honewell 7700 series respirator. I designed this to be used in the healthcare setting as healthcare workers using half-mask respirators. This will help trap any…
This is a rough draft, final draft will fit better and use less material. Clips on. Needed minimal support for one of the two clips.
This part adapts the threads on the exhaust of the Harbor Freight Pittsburgh Vaccum pump to a GERSON P100 respirator filter to reduce or eliminate oil mist. The M24x1.5mm threads will probably fit some other vacuum pumps, if you think it…
tento model chraní vaš respirator před bakteriemi a viry. Model byl vytvořen platformou tinkercad https://www.tinkercad.com/ odkaz na prusament: https://shop.prusa3d.com/cs/prusament/1243-prusament-petg-orange-for-ppe-1kg.html material a…
This is a replacement for any of the four clips that hold the headband straps to the GVS Elipse OV/P100 respirator . I have model number SPR467 (the M/L) size, but these likely also fit SPR466 (the S/M size) as well as many other…
This customizable strain relief face mask hook can help your ears by spreading the force needed to keep face mask on, to larger area on head. Hook is designed to keep mask band on place all the time. Two small additional hooks can be used…
Die Wand halterung hält: 3M Maske 3M Schutzbrille Ohrenschützer
In the middle of the Coronavirus crisis people were buying toilet paper like crazy and we don't know why. So I made an adapter to let the people use their TP with a 3M respirator mask. This won't save your life and obviously if you didn't…
This is a remix of the Stopgap Face Mask (SFM) found on https://3dprint.nih.gov/discover/3dpx-013429 . Made changes to optimize it for a FDM printer Changed the filter frame to more of an insert friction style. Changed the mounting…
DISCLAIMER: DO use at your own risk, I do not take responsibility for any injuries while using this print. I have not used this with any abrasive gases, only with particle filters for wood and concrete. I lost one of the gadgets of the…
The british S6 gasmask was first released back in the 1960's and by now the elastic on the rear straps has completely perished on most of them rendering them unwearable. I designed this head harness to replace the cloth & elastic straps…
I made lot of models with 3D printer during last 4 years. Some of them were exposed on my stall at Maker Faire Prague 2021. Now I would like to offer some of them for other 3D printing guys. There is one small and simple piece for better…
Here is an adaptation of an inhalation steam mask. It is now a COVID19 respirator with fan assistance. The fan is a standard 30x30 mm 5V one used to cool raspberryPI I have added exhaust valves. They work really well, the mask is totally…
Cover for Hamilton respirator arm
Colours are obtained through filament changes at different layers - 4 filament changes (3 colours) for Jack, 2 changes for the Grinch (the red and white highlights on that one were made using acrylic markers... sorry these are the first…
This is a hook to store a standard 3M Respirator mask inside a locker. The back clip fits into most locker slits (4" wide or more). The front hooks extend upward to hold the mask securely. Printing tips: add brim, no supports I made some…
Colour change can be obtained through filament changes at different layers. Or you can simply color the shamrocks with a sharpie :) [NB You'll need to slightly bend / curve the grid once printed, while still hot, to fit in the flo mask*…
Cap for covering the vestigial exhale valve on the GVS SPR644 ELIPSE P100 Elastomeric Half Mask Respirator with Source Control ( https://smile.amazon.com/dp/B095YBV2T9 ) to make it more clear to others that there is no unfiltered exhale…
![Respirator Valvy [ad:hoc] Covid-19](https://media.printables.com/media/prints/59037/images/617897_5a5543f9-c345-45f6-b9c9-a6d81bbbbeef/large_display_img_4256_59037.jpg)
