Counting matching models…
The Trivenger is a very acurate and easy to thorw boomerang. The flight is very stable, with a fairly high trajectory. The bommerang brakes very well on the return which allows it to be easily caught, even with a finger. If you are…
Summary This is a 100% printable yarn winder designed to turn loose yarn or threads into clean, compact balls — easily, quickly, and reliably. Key Features Fully 3D printable — no screws, bearings, rubber bands or glue required Open guide…
Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Rivendell has always been my favorite location in all of Tolkien's work, finally felt like the time to try modeling it and here are the results. Used the movie concept art as reference. I did two test prints, small resin one on the Elegoo…
This heart-shaped fidget sphere is a tactile desk toy made up of 10 interlocked pieces that slide freely using gravity. When held from one side, the remaining parts smoothly slide downward until they reach their limit, creating a…
Please visit my Github Page to get a better documentation of this mod! Versions/Variants Hello and welcome to the Belt Driven Z Mod. Versions/Variants 1: Stock V-Wheels 2: MGN-12H 3: Dual Z (Wheels and MGN) STLs, Bill of Materials and…
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This model was designed to bring you this…
Description I created this project to provide my kitten with a fun, stimulating, and interactive way to play, especially during times when I’m busy or away. Cats are natural hunters, and they thrive on movement and unpredictability.…
This model isn't just a building, it’s an entire landscape. It showcases the iconic elements that make Rivendell a sanctuary for the weary traveller. Gothic elegance and intricate spans.
takes 2x f623 bearing, NEMA 17 motor, mgn12 linear rail, and one 16th gt2 pulley.
Design by Sauron89 on 3D Warehouse Category: Buildings & Structures
This blast gate requires 3 new parts; a new “bearing” which serves as a servo horn, an indicator (to allow the user to verify the gate is open or closed), and the servo mount, which is sized for an MG995 metal-gear servo. I also created a…
This is an update to my original design, with the following changes: Cleaned up the geometry of the outer shells. Additional post/hole (totalling 3) to join the 2 outer shells An opening to see the gears in action Printing Instructions:…
This driven gear is replacing the stock qidibox spool gear. No longer rely on a pen spring for operation! This uses a HF0306 one-way bearing to function identically as the OEM gear but more reliable rewinding of the spool (and no more…
The original auger looked challenging to mount accurately onto the servo as presented, plus it was non-manifold. It also looks to be quite a workout for an FDM printer, although I didn't try. This model fixes the holes and adds a mount…
This was designed specifically for the November ‘22 knob design contest. I tried to make the cabinet handle look like it could be a remnant from Elrond’s house, Rivendell. Model at 100% is about as small as you'd want to go with a .04mm…
video: https://youtu.be/Uh-EpV1XfyQ Build video: https://youtu.be/UcKfeo\_nDHo This is my 3D printed drill press ive designed based on watchmaking drill press designs. Its very different to all the other presses on here. Still a WIP at…
This is a cable driven blast gate for 4" Sewer pipe (also know as DWV pipe). Only the flanges, cable guides, and label are 3D printed and the rest of the components are made from 1/2" plywood, although it would be possible to print those…
The iconic ceremonial dagger from the video game Riven. We made this for the folks at Cyan for their remake of Riven. You will need a threaded rod to assemble the dagger. We've included variations for M6 or ¼"-20 threads. You may need to…
Update: 6/16/18 Ok so I got a new set of 28BYJ-48 steppers since I suspected my old ones were weaker than normal. The new ones do seem to have more torque and are resulting in fewer jams. I also tried running them at 9v instead of 5v…
Add a wind-driven fan blade to your toy series!
In jet models Festo ball-valves are often used to cut-off the fuel pipe to the turbine after landing or during the refuel prozess to prevent the turbine from flooding with kerosene. In large model aircrafts above 25 kg takeoff weight…
Spur gear with a 19 tooth pulley, and pinion gear replacement for belt driven 1/10 drift cars. Motor shaft 3.2mm spur gear shaft 4mmx27mm I created this, because it's impossible to find pulley with 19 tooth. I found 20 tooth pulley only,…
The fan is mounted on a ball and compression fitting to allow adjustment of fan direction. vertically and horizontally. I used an adjustable voltage supply set to 3 volts to limit the current to 2 amps. The air velocity is reasonably…
I'm a big fan of the original Trivenger boomerang by turbi40 but I was inspired by the Aerobie flying discs I played with as a kid which had a rigid core surrounded by soft rubber. This blends the two - Import the 3mf file as parts which…
Thought it would be cool to adjust the focus on my pi cam by turning a gear. Finally got around to designing it. Printing Instructions: Resolution: 0.15 Supports: No Rafts: No Assembly Instructions: (Best to assemble on a flat surface.)…
Warcraft Rumble - Baron Rivendare, provided by Blizzard https://warcraftrumble.blizzard.com/en-gb/collection
This cable guide replaces the small tensioner clamp on the left gantry part of KevinAkaSam's Belt Driven Z Mod for the Ender 3 ( https://kevinakasam.com/ ). It prevents the cables from touching the bed while printing. It has small notches…
i didn't like how the drive spindle struggles to stay centered, especially when you are pushing on it with a drill.
Simple design that allows for a cable chained to be screwed to the rear left plate for the belted Z mod. KevinAKASam's design can be found at: https://kevinakasam.com/ This is the cable chain I used:…
WIP: Needs testing, small chance of fitment issues. I have modified the KevinAkaSam Belted Z mod to work with the extrusions on the Elegoo Neptune printers and potentially any other printer that uses extrusions that have flat fronts and…
This turntable is designed for a Futaba FP-S148 Servo modified for 360 degree rotation. You will also need four 13.5mm ball bearings and M3 hardware for mounting. There are numerous mounting holes on both the bottom and top of the…
I took Inspiration from ChadwickTheCrab , and added a mount for the drag chain to the belt clip. Designed to fit the bottom mount of Boubounokefalos' Ender Switchwire Conversion mod. The chain is a generic 10x11 which comes with 3 holes…
This Mod adds a printer controlled servo to the chamber vent at the top of the printer. It will open and close the vent automatically depending on the filament you are printing. Being servo driven will ensure the vent will stay open if…
Compact differential that's supposed to be driven by a GT2 timing belt. Its compact size allows for installation in even small projects. Measurements: 69mm x 38mm x 38mm. GT2 tooth count: 44. Designed with common sized bearings. To build…
The original driven shaft shows some signs of wear in the screw part, so similarly to the remix of the driving shaft , I created a remix with a reinforced screw part and the "top" end of the cone.
Demo: BOM: No Item Quantity 1 MGN12H 300mm Linear Rail 1 2 T8 8mm 350mm Lead Screw with Brass Nut 1 3 400mm 2020 aluminium profile 1 4 NEMA17 Stepper Motor 1 5 5mm-to-8mm Spring Coupler 1 6 KFL08 Bearing 1 7 688-2RS 8*16*5 (mm) Bearing 1…
In order to replace the Z shafts with belts, I changed the design here Belt Driven Ender 3/Pro/V2 and CR10 and ada
Designed to dispense pills into fish tanks for an experiment with the Wildlife and Fisheries department at Mississippi State University. Feel free to remix the design for your own use, as theres a good chance you won't be using it for the…
This is a cable driven blast gate for 2" ABS drain pipe. Only the flanges, cable guides, and label are 3D printed and the rest of the components are made from 1/2" plywood, although it would be possible to print those as well. Step files…
Remix of the v3.7 transmission so you can use a longer transmission belt if you can't find or have a 188 belt. This transmission should work with any size between 188 and 202 (maybe even 204) but the shorter the belt you use with this…
Parts List : 9X 608 bearings 2X450 mm leadscrew 2X leadscrew nut 8X M3 x 20mm hex head bolt 8X M3 nuts 26X M4 x 10mm hex head bolt 26X M4 Turn T nuts 3X GT2 6mm pully wheel 8mm inner diameter 1X GT2 6mm belt 1350mm long ( can use shorter…
This small project box is designed to hold a 18650 Battery and has a small compartment for a PCB. Mounting standoffs with holes (fit M2 screes) are included. The lid of the box slides open and snaps in place when closed. Dimensions:…
I was tired to see all the broken motor shaft from drive steppers in the anycubic Ace Pro. Here the Fix for it! This is the drive pulley shaft that keep breaking up because anycubic's been lazy on the design and decided to get some 5mm…
My mop bucket broke, would not spin. determined the gear cracked. Didn't want to pay $40 for a new mop bucket. Also didn't want to wait 3 weeks to get a new gear from China. So I decided to learn how to create gears on Fusion 360…and here…
This tiny FPV Tank uses Lego tracks driven by servos. To build you need the following: Two Lego tracks (Lego Part: x939 or 43903 - www.bricklink.com for best prices) Two servos (continuous [FS90R] or modify regular) Receiver of your…
You need O-rings ID33x2,5 mm, ball bearing MR 128 8x12x2,5 and MR 128 8x12x3,5 ZZ. A servo: MASTER Servo S308. The Cam may need to be adjusted in size for optimal balance between brake force and the torque of the servo. The servo isn't…
Parts: 2020 Aluminum profile 500mm 2040 Aluminum profile 50mm 2040 Aluminum profile L shape black corner bracket x2 MGN12H 300mm linear rail T8 4mm lead 300mm lead screw T8 anti backlash spring loaded nut NEMA17HS8401 Stepper motor 8mm to…
I have managed to install this mod on Biqu B1, but I had to do some adaptations: 1. 1_RightV3.7 - modified the location of the bolt from inside - it was 0.5 mm closer to the extrusion 2. the Bottom part I also modified it so it can be…
Connect a drag chain to the standard carriage plate.
Here are some files that make a automatic Window-Tilt mechanism. This is common in the EU but unknown in other parts of the world. You could adapt the design to other window open and close mechanisms… It is controlled by an Arduino…
I've created a remix of Kevinakasam from his Github for the Belted Z ender 3 I've added the outside rail to the mix, i'm still working on an endstop location so its not 100% completed but will be done ASAP Recommended settings: Materials…
SolidCore Triple Z/ Belt Driven Z-Axis Setup The triple z-axis design used on the SolidCore CoreXY Printer utilizes three independent belt driven stepper motors to implement auto bed leveling. Each lead screw will be constrained by a…
Axiom 5-DoF Robotic Arm Platform — Modular & Open-Control Design This project provides a complete, 3D-printable 5-DoF robotic arm mechanical structure with a functional gripper. Freedom to Control It Your Way: The primary release provides…
Just needed something that fits my needs. Print with supports for the brace cylinder.
This is a remix to the Left Z plate, Direct drive version for Kevinakasam's amazing Belt mod. My remix adds two anchor points for the wiring loom from the printhead and from the X stepper. On my machine I added connectors too all the…
This tiny FPV Turret Quad Tank uses Lego tracks driven by servos. It turns via skid steer. The tracks can articulate 30 degrees up and down for going over obstacles. The camera turret is controlled by a servo connected to the yaw on the…
A list of storage solutions to attach to the QUBE 500 case. I plan on adding some more as most of the models I am using for this are models I already made as practice for my collages CAD program Current list: Caliper Holder…
This is a re-remix oft the following great works: (Thanks to all the effort you‘ve put in the design!) Original: by ExtRuben https://www.printables.com/model/841041-automatic-portafilter-cleaning-device 1st Remix: by Freedie B.…
It is my modification of https://cults3d.com/en/3d-model/gadget/smars-modular-robot . Chassis was changed to enable use two 3,7 V Li-ION batteries and some switches were added to enable select preprogrammed functionality. It is usefull…
you can print it as it is right now but it might not fit your gun , atleast not intentionally, i made this so you can take it and modify it yourself to fit your project included are one that is most like the uclg, one grip with no…
Made base slightly higher and created a space for a rod from belted mod
[2025/04/27] Updated shape of several parts (all file types). Utility Cart for 3030 profile driven by NEMA stepper via 2mm paracord. Fully parametrically adjustable in Fusion 360. Usable as single Wheel Plate and also as double like…
i made some aesthetic tweaks to the parts including a hole in the covers for a motor visualizer, and left a folder with the parts without those mods (you will have to get the rest from the original post). for the main sprite extruder i…
IMPORTANT: you will need all the regular parts from kevinakasam's belted z mod but substitute file “1_leftV3.6” with the version I made and print the additional cable holder piece. I just used some random screws I had on hand but you can…
This is a spacer which fits the 10 m high antenna. It is function is to hold the driven plate nicely parallel to the ground plane plate. Without it the driven plate can get a bit slanted and that can vary with the wind pushing on the…
This extruder is designed for E3D v6 3mm Direct Hotend . Lightly modified extruder body and idler were made by request for 1.75mm Universal (Direct) hotend - these parts have not been tested yet. The extruder can be mounted into Prusa i3…
The ancient but remarkable Archimedes screw, which operates in water lifting mode, is usually driven by an external energy source - muscle or engine. I designed a screw equipped with a special impeller located on the same shaft and…
Servo driven nozzle wiper arm. Servo HiTec HS311 on RAMPS 1.4 Electrical Spikes maybe an issue: Servomotor protection circuit test. A diode may fix this issue https://youtu.be/IierWEZ0SKU via @YouTube Nozzle cleaner wiper improved. Servo…
The flat Moiety dagger as found in many places in the game Riven.
In order to have a Linux driven Touch-Device, which is Battery driven and last for +5 Hours while running a PyQt6 App, I designed this Device. Not exactly the cheapest alternative, but fully customizable. BoM (Bill of Material) attached…
A mount for the sprite extruder cable and a cable chain for the kevinakasam belted Z mod.
Piston Cup in the style of Disney/Pixar. No supports required for printing, Snaps together.
I want to quickly change between heights and don't like the screw in feet that come with the engraver. Made this simple model to use parameters in Fusion to adjust the height. Feet are square to help with alignment (I have markings on the…
Presenting the Nova Pro V4 Flex drive edition precision flexible shaft drive extruder! This project combines a flexible drive shaft locating the motor up on the frame, rather than on the moving carriage, with a bondtech drive gear set.…
Updated model for v3.7 here
This remix allows to use the factory Z braces of the CR10 V2/CR10 V3 while upgrading to a belted driven Z axis. The transmissions are modified to match the bolt pattern from the top brace bracket. THIS REQUIRES LONGER SHAFTS THAN THE…
Does what the title says and fits perfectly on the back plate if you use Direct Drive with Dual Z Belted
This is a redesign of the Z Axis for the Hypercube. I initially built it using 2020 extrusion and a leadscrew. I was not happy with the bounce of the bed and tilting/rocking and the play of the leadscrew/nut. My solution was to re-design…
A hung clock driven like a marionette. How to make Parts A 28BYJ-48 stepper motor and its driver board comes with. Micro controller such as Arduino nano. Soldering iron for plastic welding. Some tapping screws. Some weight. Light silicone…
A simple and inexpensive way to get perfect prints, first time, any time ! Forget useless printed brackets and dual lead screws : a belt driven system is the way to go, definitely. BOM : 1x GT2 20T pulley 1x GT2 20T idler pulley 1x GT2…
Model is a prop-driven glider type plane with ~17 in wingspan and 12 in fuselage length. Made from inspiration of previous RC plane designed by myself and others. Stand is a little unstable, will try to fix later. Would recommend printing…
This bird swings around at about 1 revolution in 6 seconds. It’s guaranteed to work till the cat sees it and pounces. The arm is quite flexible, so the bird oscillates up and down 1 to 2“while attempting to escape from its predator. I…
This steampunk mechanical heart model combines anatomical inspiration with intricate clockwork engineering. The sculpt features a heart-shaped mechanical core covered in exposed gears, pipes, gauges, and riveted metal plating, creating a…
шестерня грм ведомая-42 зубья/timing gear driven-42 teeth
I lost some files between building this and now, and did not make a parts list when building. I have the key files included and can try to find specific missing models if requested. I posted this as there was enough work that went into…
This steampunk mechanical bird model combines a compact avian form with layered industrial detailing. The sculpt features riveted panels, exposed gears, and small mechanical components integrated across the body, creating a cohesive…
“ Roll-a-Shape ” is a dynamic, family-friendly game that combines the excitement of dice rolling with the challenge of shape matching. With four unique dice - focusing on shape, size, thickness, and color - players roll to reveal a…
Overview See a video of the prototype working here . This is a new* belt driven remote direct drive extruder concept, which was my Masters Thesis project (MSc Advanced Materials and Additive Manufacturing). It uses a secondary belt to…
First: A Warning This plotter was designed for a specific event, as it is the only thing it can draw is “BS5” so if you want it to do anything else you will have to make the cams and you should not assume that this will be easy If you…
Edit Jan 3 2024: printed, installed, successful. I am using the single motor driven set up and it has fixed the drooping x gantry issues. Very happy with this set up. Make sure you order longer belts if you follow the build instructions…
Components for the creation of a compact belt driven elevator primary using 3d printed parts with main frames made out of 1/8" thick 2x1" aluminum tubings. Components modified from OnShape CAD models.
To automatically open and close the Vent Cover on the Prusa CORE One/+ with MMU3, I added a servo which is connected via the Prusa “Hackerboard” to the Prusa CORE One/+. Via a GCODE the Vent Cover can be opened and closed during the…
This mechanical beetle model presents a compact, industrial take on an insect form, combining smooth shell-like panels with exposed mechanical elements. The rounded body is reinforced with riveted plating and small gear details, while the…
All credits go to kevinakasam and his Beltdriven Ender 3 mod. Link to his wonderfull mod: https://github.com/kevinakasam/BeltDrivenEnder3/tree/main/V3 https://www.thingiverse.com/thing:4243512 This replaces the 1_LeftV3.5.stl with this…
Creality Servo driven nozzle wiper arm Added Top adjust method, so that if the Wiper Arm needs to be manually uncrewed and reattached it is easier to do, only two STL files required, plus parts :- Using a servo on a Creality Ender 5 Plus…
This is a VERY simple little mod to extend your spool mount on an Ender 3. It was a little too low and often touched my belt that controls my dual z axis, so I needed it higher up but I don't like the side mount notion. I chopped up and…
Had issues with original Hamskea grip pad, so designed better one. Three versions attached. v4 is in picture. Print using TPU! Use two sided tape to attach thing to limb.
